Search NASA⌕ Search

SEARCH · Search NASA

Results for “Amination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Aliphatic Amines from Waste Polyolefins by Tandem Pyrolysis, Hydroformylation, and Reductive Amination

Pyrolysis of waste plastics can produce a product mixture with a high concentration of olefins (>50 wt%). The olefins, as building blocks in the petroleum industry, are potential precursors for valuable commodity chemicals with higher values (>$2000 per ton). In this work, we produce aldehydes by hydroformylation of the olefins present in pyrolysis oil from colored post-consumer recycled high-density polyethylene (PCR-HDPE). The obtained aldehydes in the oil are then converted into aliphatic amines via reductive amination with a Ru/C catalyst. The aminated oil was characterized by multiple analytical chemistry techniques including elemental analysis, nuclear magnetic resonance spectroscopy, high-resolution liquid chromatography-mass spectrometry, and gas chromatography-mass spectrometry with a Polyarc flame ionization detector. The concentration of metals in the PCR-HDPE and oil changes during the tandem processes, showing limited effects of these elements (e.g., Al, Ca, Fe, Mg, Ti, Zn) on hydroformylation and reductive amination. Additionally, we demonstrated that reductive amination of aldehydes with varied carbon numbers and branching properties can be achieved in the presence of a complex mixture, including paraffins and aromatics. The results indicate that waste plastics have the potential to serve as a renewable source for mono and di aliphatic amines, thereby diminishing reliance on fossil feedstocks as the current primary amine source.

aliphatic amines↗
NASA NTRS1973

CO2 removal by solid amine sorbents. 1: Experimental studies of amine resin IR-45 with regard to spacecraft applications. 2: Computer program for predicting the transient performance of solid amine sorbent systems

The sorbent behavior of solid amine resin IR-45 with regard to potential use in regenerative CO2-removal systems for manned spacecraft is considered. Measurements of equilibrium sorption capacity of IR-45 for water and for CO2 are reported, and the dynamic mass transfer behavior of IR-45 beds is studied under conditions representative of those expected in a manned spacecraft. A digital computer program was written for the transient performance prediction of CO2 removal systems comprised of solid amine beds. Also evaluated are systems employing inorganic molecular-sieve sorbents. Tests show that there is definitely an effect of water loading on the absorption rate.

Wright, R. M.↗
DOE OSTI2019

Rational Design of Efficient Amine Reductant Initiators for Amine–Peroxide Redox Polymerization

Amine-peroxide redox polymerization (APRP) has been highly prevalent in industrial and medical applications since the 1950s, yet the initiation mechanism of this radical polymerization process is poorly understood so that innovations in the field are largely empirically driven and incremental. Through a combination of computational prediction and experimental analysis, we elucidate the mechanism of this important redox reaction between amines and benzoyl peroxide for the ambient production of initiating radicals. Our calculations show that APRP proceeds through S N 2 attack by the amine on the peroxide but that homolysis of the resulting intermediate is the rate-determining step. We demonstrate a correlation between the computationally predicted initiating rate and the experimentally measured polymerization rate with an R 2 = 0.80. The new mechanistic understanding was then applied to computationally predict amine reductant initiators with faster initiating kinetics. This led to our discovery of N-(4-methoxyphenyl)pyrrolidine (MPP) as amine reductant, which we confirmed significantly outperforms current state-of-the-art tertiary aromatic amines by ~20-fold, making it the most efficient amine-peroxide redox initiator to date. The application of amines with superior kinetics such as MPP in APRP could greatly accelerate existing industrial processes, facilitate new industrial manufacturing methods, and improve biocompatibility in biomedical applications conducted with reduced initiator concentrations yet higher overall efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Directed Hydrogen Bond Placement: Low Viscosity Amine Solvents for CO2 Capture

Capture of CO2 from power generation is required for its conversion or sequestration. Toward this goal, numerous CO2 capture processes have been developed, with the most widely deployed technology utilizing aqueous solutions of amines. Our group has focused on the design of several classes of water-lean solvents in order to identify molecular-level descriptors to control materials properties such as viscosity and regeneration energy. Large scale molecular simulations have shown that strategic placement of hydrogen bonding and tuning of the acid/base equilibria are critical for controlling viscosity at CO2-rich loadings. Here, we extend these principles to a new class of pyridine-based molecules with a secondary amine functionality for binding CO2. The result is a class of water-lean amines that retain high gravimetric capacity (20%) while exhibiting the lowest CO2-rich viscosities (<150 cP, 40 °C) of any 100% concentrated amine currently known. Additionally, these newly identified solvents exhibit regeneration temperatures as low as 60 °C when applying a polarity swing assisted regeneration, resulting in a solvent that can conceptually absorb and desorb CO2 with only a 20 °C temperature swing.

Malhotra, Deepika↗
DOE OSTI2019

Evaluation of Attractive Interactions in the Second Coordination Sphere of Iron Complexes Containing Pendant Amines

The interactions between pendant amines in the second coordination sphere and ligands in the first coordination sphere are important for understanding the structures and reactivity of complexes containing PR2NR'2 ligands, which have been shown to be highly active H2 oxidation/production catalysts. A series of [Fe(PPh2NBn2)2(X)(Y)]n+ complexes have been prepared and structurally characterized. These complexes have two different ligands with which the pendant amines of the diphosphine ligand can interact. The solid state structure of cis-Fe(PPh2NBn2)2Cl2 reveals that the six-membered rings adjacent to the P atoms are in a boat confirmation, resulting in close N•••P distances that suggests the P atoms have a greater affinity for the lone pair of electrons on the N atom than chloride ligands. Similarly, boat conformations are observed for both rings adjacent to the hydride ligands of trans-[HFe(PPh2NBn2)2(CH3CN)]+ and trans-HFe(PPh2NBn2)2Cl, resulting in short N•••H distances. Spectroscopic and computational studies of trans-[HFe(PPh2NBn2)2(CO)]+, trans-[HFe(PPh2NBn2)(PPh2NBn2H)(CO)]2+, and trans-[HFe(PPh2NBn2)2(H2)]+ indicate the complexes are more stable when the pendant amines in boat conformations are adjacent to the hydride ligand. These data suggest an attractor ordering of H- > CO > H2 > PR3 > Cl- ~ CH3CN. This work was supported by the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory (PNNL) is operated by Battelle for the U.S. DOE. Computations were performed using the Cascade supercomputer at the Environmental Molecular Sciences Laboratory, a National Scientific User Facility sponsored by the DOE’s Office of Biological and Environmental Research and located at PNNL.

Liao, Qian↗
DOE OSTI2019

Photo-generated reactive oxygen species assisted tandem amine homocoupling and amine-alcohol cross-coupling reaction on mesoporous spinel cobalt oxide

Mesoporous spinel cobalt oxide (Co 3 O 4 ) with fine-tuned pore size distributions (9.6–17.6 nm) and different surface areas (33–85 m 2 /g) were synthesized using a series of nonionic surfactants. A direct influence of the chemical composition of the surfactants and calcination temperature on crystallite size, morphology, pore size/volume, surface area, valance band edge, and Co 2+ /Co 3+ ratio was recognized. Correlation between the aforementioned factors, transition metal ion incorporation and benzylamine homocoupling reaction was discussed. Shape-specific binding of amine on the cobalt oxide active sites was proposed based on substrate scope study. Tandem synthesis strategy to selectively synthesize amine (aliphatic/aromatic) homo-coupled imines and amine-alcohol cross-coupled imines was introduced. Low-intensity light-induced singlet oxygen and hydroxyl radical-mediated reaction mechanism was proposed based on the EPR, XPS, photoreactor, and reactive oxygen species scavenger tests. Selective and switchable synthesis of homo-coupled (yield 85%) and cross-coupled (yield 87%) products was achieved with sodium azide and mannitol additives.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

Synthesis and characterization of bisimide amines and bisimide amine-cured epoxy resins

An attempt is made to develop tough, moisture resistant, high char yield epoxy resins by means of novel bisimide amine (BIA) hardener curing agents and a state-of-the-art epoxy resin system. The BIAs are isolated as mixtures containing monomer, oligomer, and polymeric species, and then characterized by elemental analysis and high pressure liquid chromatography. The bisimide amine-cured epoxies (IMEs) were characterized with respect to moisture absorption, thermal properties, and physical and mechanical properties, as well as in the role of matrices in Celion 6000/IME composites. The relative toughness characteristics of each IME formulation was measured by the 10 deg off-axis tensile test, measuring the uniaxial tensile strength, shear strength, and shear-strain-to-failure of the composite systems.

Scola, D. A.↗
DOE OSTI2021

New reactions of diazene and related species for modelling combustion of amine fuels

Potential energy surfaces for reactions involving N 2 H 2 isomers of diazene (diimide) have been explored using density functional theory, with energies based on coupled-cluster theory. A focus is on processes that create or consume these species, and isomerisation between the E (trans) and Z (cis) forms of HNNH. Furthermore, these include isomerisation and dissociation pathways for HNNH, addition of H atoms to form N 2 H 3 , abstraction by H atoms yielding short-lived NNH, and abstraction reactions of H with N 2 H 3 . Transition state and capture theories are applied for high-pressure-limiting behaviour, while low-pressure and falloff regions are characterised via the methods of Troe and coworkers. Rate constants and thermochemistry are provided to improve models of diamine chemistry, relevant to the combustion of NH 3 especially at high concentrations, high pressures or under reducing conditions. Results indicate that amine radical recombination mainly yields the E HNNH isomer, while H-abstraction from N 2 H 3 results in E HNNH and H 2 NN. However, at elevated temperature E → Z isomerisation becomes competitive, and Z HNNH, being more reactive, acts to enhance the diazene consumption rate.

10 SYNTHETIC FUELS↗
NASA NTRS1982

Synthesis and characterization of bisimide amines and bisimide amine-cured epoxy resins

A study has been conducted with the objective of developing tough, moisture resistant, high char yield epoxy resins using novel bisimide amine (BIA) hardeners as curing agents with MY-720, a commercial state-of-the-art epoxy resin system. BIA cured epoxies are shown to have lower moisture absorption than MY-720 and other state-of-the-art epoxy resins; the tensile strengths and strain-to-failures of several of the bisimide epoxy resins (IME's) are higher than those of the state-of-the-art epoxies. Most IME's have compression properties equivalent to those of state-of-the-art epoxies. Two resin systems, IME-10 and IME-12-3, have better overall properties than other resin systems investigated.

Scola, D. A.↗