Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aqueous synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Aqueous Synthesis of Technetium-Doped Titanium Dioxide by Direct Oxidation of Titanium Powder, a Precursor for Ceramic Nuclear Waste Forms

Technetium-99 (Tc) is a problematic fission product that complicates the long-term disposal of nuclear waste due to its long half-life, high fission yield, and the environmental mobility of pertechnetate, its stable form in aerobic environments. One approach to preventing Tc contamination is through incorporation into durable waste forms based on weathering-resistant minerals such as rutile (titanium dioxide). Here, the incorporation of technetium into titanium dioxide by means of simple, aqueous chemistry - direct oxidation of titanium powder in the presence of ammonium fluoride - is achieved. X-ray absorption fine structure spectroscopy and diffuse reflectance spectroscopy indicate that Tc(IV) replaces Ti(IV) within the structure. Rather than being incorporated as isolated Tc(IV) ions, Tc is present as pairs of edge-sharing Tc(IV) octahedra similar to molecular Tc(IV) complexes such as [(H 2 EDTA)TcIV](μ-O) 2 . Technetium-doped TiO 2 was suspended in deionized water under aerobic conditions, and the Tc leached under these conditions was followed for 8 months. The normalized release rate of Tc (LR Tc ) from the TiO 2 particles is low (3 × 10 -6 g m -2 d -1 ), which illustrates the potential utility of TiO 2 as waste form. However, the small size of the as-prepared TiO 2 nanoparticles results in an estimated retention of Tc of 10 4 years, which is only a fraction of the half-life of Tc (2.1 × 10 5 years).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Synthesis of Concave Rh Nanotetrahedra with Defect-Rich Surfaces: Insights into Growth-, Defect-, and Plasmon-Enhanced Catalytic Energy Conversion

The control of morphology in the synthesis of Rh nanocrystals can be used to precisely tailor the electronic surface structure; this in turn directly influences their performance in catalysis applications. Many works have brought attention to the development of Rh nanostructures with low-index surfaces, but limited effort has been devoted to the study of high-index and surface defect-enriched nanocrystals as they are not favored by thermodynamics because of the involvement of high-energy surfaces and increased surface-to-volume ratios. Here, we demonstrate an aqueous synthesis of concave Rh nanotetrahedra (CTDs) serving as efficient catalysts for energy conversion reactions. CTDs are surface defect-rich structures that form through a slow growth rate and follow the four-step model of metallic nanoparticle growth. Via the tuning of the surfactant concentration, the morphology of Rh CTDs evolved into highly excavated nanotetrahedra (HETDs) and twinned nanoparticles (TWs). Unlike the CTD surfaces with abundant adatoms and vacancies, HETDs and TWs have more regular surfaces with layered terraces. Each nanocrystal type was evaluated for methanol electrooxidation and hydrogen evolution from hydrolysis of ammonia borane, and the CTDs significantly showed the best catalytic performance because of defect enrichment, which benefits the surface reactivity of adsorbates. In addition, both CTDs and HETDs have strong absorption near the visible light region (382 and 396 nm), for which they show plasmon-enhanced performance in photocatalytic hydrogen evolution under visible light illumination. CTDs are more photoactive than HETDs, likely because of more pronounced localized surface plasmon resonance hot spots. Lastly, this facile aqueous synthesis of large-surface-area, defect-rich Rh nanotetrahedra is exciting for the fields of nanosynthesis and catalysis.

36 MATERIALS SCIENCE↗

CdTe-Cu(OH){sub 2} nanocomposite: Aqueous synthesis and characterization

CdTe-Cu(OH){sub 2} nanocomposites were synthesized in aqueous solution by a seed-mediated growth approach. The effect of refluxing time and the concentration of Cu{sup 2+} on the preparation of these samples were measured using UV-visible absorption and photoluminescence analysis. The emission peak of the synthesized nanocomposites (CdTe-Cu(OH){sub 2}) was shifted from 605 (CdTe seed) to 621 nm. The size of CdTe nanoparticles were averaged about 3.22 nm, and the CdTe-Cu(OH){sub 2} nanocomposites were averaged as 5.19 nm. The synthesized CdTe-Cu(OH){sub 2} nanocomposite were characterized with XRD, EDAX, TEM, FT-IR, EPR, and thermal analysis (TG/DTG curves). The results indicate that as-prepared nanoparticles with core/shell structure exhibit interesting optical properties. -- Graphical Abstract: Schematic of aqueous synthesis route for CdTe-Cu(OH){sub 2} nanocomposite and The Stokes shift of CdTe nanocrystals and CdTe-Cu(OH){sub 2} Nanocomposites, (CdTe: emission at 605 nm, CdTe-Cu(OH){sub 2}: emission at 621 nm). Display Omitted Highlights: {yields} CdTe-Cu(OH){sub 2} nanocomposites were synthesized by a seed-mediated growth approach. {yields} The synthetic procedure is simple, and can be easily scaled up. {yields} The effect of refluxing time on the preparation of these samples was measured. {yields} The Cu(OH){sub 2} shell thickness was controlled by the amount of Cu in the solution. {yields} TEM images demonstrated homogeneous size distribution for these nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Irradiation route to aqueous synthesis of highly luminescent ZnSe quantum dots and its function as a copper ion fluorescence sensor

Highlights: • Radiation chemical technique can provide a useful route for synthesis of ZnSe QDs. • Chelating nature of ethylene diamine is exploited for capping nanoparticles. • ZnSe QDs can be a suitable sensitive alternative to toxic cadmium-based system. • Cu(II) ion is probed by QDs in the presence of other physiologically relevant ions. - Abstract: Size-controlled synthesis of stable ZnSe QDs with narrow distribution in aqueous environment through conventional soft chemical method still poses a challenge. The proposed radiation assisted strategy demonstrates aqueous synthesis of stable, monodisperse and luminescent ZnSe QDs capped with chelating ethylene diamine under ambient conditions and at room temperature. Radiation chemical method facilitates in slow and in-situ release of selenium ion from sodium selenosulfate. The concentrations of precursors, such as zinc salt, selenium source, ethylene diamine and absorbed radiation (7–90 kGy) dose were optimized for obtaining good quality particles. Selective quenching of luminescence of as-synthesized quantum dots (QDs) by Cu{sup 2+} ions vis-à-vis other physiologically important cations provide evidence for use of ZnSe quantum dots as alternative to toxic Cd-based quantum dots to probe Cu{sup 2+} ions. The linear relation of ratio of loss in emission intensity as a function of concentration of Cu(II) indicates detection limit in nano-molar range.

36 MATERIALS SCIENCE↗

Aqueous synthesis and electrical properties of nano-crystalline PLZT capacitors.

Devices with nano-crystalline microstructures have been shown to possess improved electrical properties. Further advantages include lower processing temperatures; however, device fabrication from nano-particles poses several challenges. This presentation describes a novel aqueous synthesis technique to produce large batch sizes with minimal waste. The precipitate is readily converted at less than 550 C to a phase pure, nano-crystalline Pb{sub 0.88} La{sub 0.12}(Zr{sub 0.70} Ti{sub 0.30}){sub 0.97} O{sub 3} powder. Complications and solutions to sample fabrication from nano-powders are discussed, including the use of glass sintering aids to improve density and further lower sintering temperatures. Finally, electrical properties are presented to demonstrate the potential benefits of nano-crystalline capacitors.

36 MATERIALS SCIENCE↗

Single Atomic Iron Site Catalysts via Benign Aqueous Synthesis for Durability Improvement in Proton Exchange Membrane Fuel Cells

Atomically-dispersed iron-nitrogen-carbon (Fe–N–C) catalysts have arisen as promising candidates for replacing the costly precious metal catalysts in fuel cells but still face some grand challenges, such as insufficient site density and durability. Herein, we report a self-assembly method in an aqueous solution to develop an atomically-dispersed iron catalyst with high oxygen reduction reaction (ORR) activity and stability in acidic electrolytes. As determined by high-resolution transmission electron microscopy (HR-TEM), X-ray absorption spectroscopy (XAS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), this benign aqueous synthesis strategy facilitates the formation of homogeneous atomic nitrogen-coordinated iron sites embedded in a popcorn-like porous graphitic carbon matrix. These catalyst properties contribute to the improved ORR kinetic current density and mass transport. By controlling synthesis chemistry, the correlation between structure and property is systematically investigated. In this work, the iron content is the most critical material property and can regulate site density and graphitic carbon structures in the catalyst, impacting catalytic activity and stability. The enhanced performance and durability were examined in both acidic aqueous electrolytes and membrane electrode assemblies.

25 ENERGY STORAGE↗

One-pot aqueous synthesis of ultrathin trimetallic PdPtCu nanosheets for the electrooxidation of alcohols

Due to their synergistic structural and compositional advantages, ultrathin multimetallic nanosheets are widely recognized as highly efficient electrocatalysts for alcohol electrooxidation. However, despite significant efforts, current synthetic strategies for the preparation of multimetallic nanosheets mainly focus on the reduction of metal precursors in organic solvents or in the presence of toxic CO. In this study, a one-pot aqueous synthesis method based on the self-assembly of the novel surfactant docosyltrimethylammonium chloride was employed to produce ultrathin free-standing trimetallic PdPtCu nanosheets under ambient and eco-friendly conditions. No toxic chemicals or organic solvents were employed in this synthesis. The obtained PdPtCu nanosheets were ultrathin with a dendrite-like nanostructure (with an average thickness of ~3.5 nm) and alloyed crystalline features. The proposed synthetic strategy is also universally applicable for tuning the elemental ratios and compositions of ultrathin multimetallic nanosheets. Due to the multiple advantages of unique ultrathin dendrite nanostructures and multimetallic elemental compositions, the PdPtCu nanosheets exhibited remarkably enhanced performance in the electrooxidation of alcohols (methanol, ethanol, glycerol and glucose). The proposed one-pot eco-friendly synthetic concept could be used to build more multimetallic nanostructures with synergetic enhancement effects for a range of electrocatalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile microwave-assisted aqueous synthesis of CdS nanocrystals with their photocatalytic activities under visible lighting

Graphical abstract: - Highlights: • Three kinds of CdS nanostructures have been controllably synthesized. • Ethanediamine acts as a phase and morphology controlling reagent. • Three CdS nanostructures display high visible light photocatalytic activities. • Cubic CdS-3 shows superior photocatalytic activity to the other hexagonal CdS. • The growth processes for fabrication of CdS nanocrystals are also discussed. - Abstract: Three kinds of CdS nanostructures, that is, hexagonal nanospheres (CdS-1), hierarchical caterpillar-fungus-like hexagonal nanorods (CdS-2) and hierarchical cubic microspheres (CdS-3), were controllably synthesized by a facile and one-pot microwave-assisted aqueous chemical method using ethanediamine as a phase and morphology controlling reagent. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectra. The results show that CdS-1 is mainly composed of monodispersed hexagonal nanospheres with average diameters of about 100 nm; hexagonal CdS-2 has lengths in the range of 600–800 nm and diameters of 40–60 nm, assembled by nanoparticles about 20 nm in diameter; and CdS-3 is pure cubic microspheres with diameters in the range of 0.8–1.3 μm, aggregated by tiny nanograins with size of 5.8 nm. The band gap energies of CdS products were calculated to be 2.30, 2.31 and 2.24 eV observed from UV–vis DRS for CdS-1, CdS-2 and CdS-3, respectively. PL spectra of CdS samples showed that sphalerite CdS-3 possesses a very weak fluorescence, while wurtzite CdS-2 has a strongest green near-band edge emission (NBE) at 550 nm. The visible light photodegradation of methylene blue and rhodamine B in the presence of CdS photocatalysts illustrates that all of them display high photocatalytic activities. Significantly, the cubic CdS-3 exhibits more excellent photocatalytic behavior in degradation of organic dyes than the other hexagonal CdS, which is closely related to the phase and morphology structure of cubic CdS.

36 MATERIALS SCIENCE↗

Direct Aqueous-Phase Synthesis of Sub-10 nm “Luminous Pearls” with Enhanced in vivo Renewable Near-Infrared persistent luminescence

Near-infrared persistent luminescence nanoparticles (PLNPs) possess unique near-infrared persistent luminescence properties. They have recently been emerging as important materials for a wide variety of applications in chemistry and biology. Yet, they must endure high-temperature solid-state annealing reactions and subsequent complicated physical post-treatments. Herein, we report on a first direct aqueous-phase chemical synthesis route of NIR PLNPs and present their enhanced in vivo renewable near-infrared persistent luminescence. Our method leads to monodisperse PL nanoparticles as small as ca. 8 nm. More importantly, such sub-10 nm nanocrystals are readily dispersed, functionalized as well as form stable colloidal solutions in aqueous solution and cell culture medium for biological applications. Under bio-tissue penetrable red-light excitation, we found that such nanocrystals possess superior renewable PL photoluminescence in vitro and in vivo than current larger counterparts made by existing methods. We believe that this solid-state-reaction-free chemical approach overcomes the current key roadblock in regard to PLNP development, and thus will pave the way to broad use of these advanced miniature “luminous pearls” in photonics and biophotonics.

Luminous Pearls, Near-Infrared persistent luminesc↗

Fischer–Tropsch Synthesis: Effect of Reducing Agent for Aqueous-Phase Synthesis Over Ru Nanoparticle and Supported Ru Catalysts

The effect of the reducing agent on the performance of a ruthenium nanoparticle catalyst was investigated during aqueous-phase Fischer–Tropsch synthesis using a 1 L stirred tank reactor in the batch mode of operation. For the purpose of comparison, the activity and selectivity of NaY zeolite supported Ru catalyst were also studied. NaBH 4 and hydrogen were used as reducing agents in our study, and hydrogen reduced catalysts exhibited higher activities than the NaBH 4 reduced catalysts, because of higher extent of reduction and a relatively lower tendency toward agglomeration of Ru particles. The Ru nanoparticle catalyst displayed higher activities than the NaY zeolite supported Ru catalyst for both reducing agents. NaBH 4 reduced catalysts are less active and the carbon dioxide selectivity is higher than the hydrogen reduced catalysts. The activity of the supported Ru catalyst (Ru/NaY) was 75 % of that of the Ru nanoparticle catalyst, and has the benefit of easy wax/catalyst slurry separation by filtration. Finally, the hydrogen reduced supported Ru catalyst exhibited superior selectivity towards hydrocarbons (higher C 5+ selectivity and lower selectivity to methane) than all other catalysts tested.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimal thermodynamic conditions to minimize kinetic by-products in aqueous materials synthesis

Abstract Phase diagrams offer substantial predictive power for materials synthesis by identifying the stability regions of target phases. However, thermodynamic phase diagrams do not offer explicit information regarding the kinetic competitiveness of undesired by-product phases. Here we propose a quantitative and computable thermodynamic metric to identify synthesis conditions under which the propensity to form kinetically competing by-products is minimized. We hypothesize that thermodynamic competition is minimized when the difference in free energy between a target phase and the minimal energy of all other competing phases is maximized. We validate this hypothesis for aqueous materials synthesis through two empirical approaches: first, by analysing 331 aqueous synthesis recipes text-mined from the literature; and second, by systematic experimental synthesis of LiIn(IO 3 ) 4 and LiFePO 4 across a wide range of aqueous electrochemical conditions. Our results show that even for synthesis conditions that are within the stability region of a thermodynamic Pourbaix diagram, phase-pure synthesis occurs only when thermodynamic competition with undesired phases is minimized.

Wang, Zheren (ORCID:0000000227429451)↗

Effect of precursor solutions stirring on deep level defects concentration and spatial distribution in low temperature aqueous chemical synthesis of zinc oxide nanorods

Hexagonal c-axis oriented zinc oxide (ZnO) nanorods (NRs) with 120-300 nm diameters are synthesized via the low temperature aqueous chemical route at 80 °C on silver-coated glass substrates. The influence of varying the precursor solutions stirring durations on the concentration and spatial distributions of deep level defects in ZnO NRs is investigated. Room temperature micro-photoluminesnce (μ-PL) spectra were collected for all samples. Cathodoluminescence (CL) spectra of the as-synthesized NRs reveal a significant change in the intensity ratio of the near band edge emission (NBE) to the deep-level emission (DLE) peaks with increasing stirring durations. This is attributed to the variation in the concentration of the oxygen-deficiency with increasing stirring durations as suggested from the X-ray photoelectron spectroscopy analysis. Spatially resolved CL spectra taken along individual NRs revealed that stirring the precursor solutions for relatively short duration (1-3 h), which likely induced high super saturation under thermodynamic equilibrium during the synthesis process, is observed to favor the formation of point defects moving towards the tip of the NRs. In contrary, stirring for longer duration (5-15 h) will induce low super saturation favoring the formation of point defects located at the bottom of the NRs. These findings demonstrate that it is possible to control the concentration and spatial distribution of deep level defects in ZnO NRs by varying the stirring durations of the precursor solutions.

36 MATERIALS SCIENCE↗