Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aspherical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

The magnetic field of Uranus

Aspherical harmonic model of the planetary magnetic field of Uranus is obtained from the Voyager 2 encounter observations using generalized inverse techniques which allow partial solutions to complex (underdetermined) problems. The Goddard Space Flight Center 'Q3' model is characterized by a large dipole tilt (58.6 deg) relative to the rotation axis, a dipole moment of 0.228 G R(Uranus radii cubed) and an unusually large quadrupole moment. Characteristics of this complex model magnetic field are illustrated using contour maps of the field on the planet's surface and discussed in the context of possible dynamo generation in the relatively poorly conducting 'ice' mantle.

Connerney, J. E. P.↗
NASA NTRS2020

Apparent dust size discrepancy in aerosol reanalysis in north African dust after long-range transport

North African dust reaches the southeastern United States every summer. Size-resolved dust mass measurements taken in Miami, Florida, indicate that more than one-half of the surface dust mass concentrations reside in particles with geometric diameters less than 2.1 µm, while vertical profiles of micropulse lidar depolarization ratios show dust reaching above 4 km during pronounced events. These observations are compared to the representation of dust in the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) aerosol reanalysis and closely related Goddard Earth Observing System model version 5 (GEOS-5) Forward Processing (FP) aerosol product, both of which assimilate satellite-derived aerosol optical depths using a similar protocol and inputs. These capture the day-to-day variability in aerosol optical depth well, in a comparison to an independent sun-photometer-derived aerosol optical depth dataset. Most of the modeled dust mass resides in diameters between 2 and 6 µm, in contrast to the measurements. Model-specified mass extinction efficiencies equate light extinction with approximately 3 times as much aerosol mass, in this size range, compared to the measured dust sizes. GEOS-5 FP surface-layer sea salt mass concentrations greatly exceed observed values, despite realistic winds and relative humidities. In combination, these observations help explain why, despite realistic total aerosol optical depths, (1) free-tropospheric model volume extinction coefficients are lower than those retrieved from the micro-pulse lidar, suggesting too-low model dust loadings in the free troposphere, and (2) model dust mass concentrations near the surface can be higher than those measured. The modeled vertical distribution of dust, when captured, is reasonable. Large, aspherical particles exceeding the modeled dust sizes are also occasionally present, but dust particles with diameters exceeding 10 µm contribute little to the measured total dust mass concentrations after such long-range transport. Remaining uncertainties warrant a further integrated assessment to confirm this study's interpretations.

MEERA-2 aerosols reanalysis↗
NASA NTRS1976

The singly averaged differential equations of satellite motion for e greater than or equal to 0 and less than 1

The singly-averaged differential equations of motion of a satellite are developed in terms of parameters valid for all eccentricities less than one. The perturbations included in the acceleration model are due to an aspherical central planet (zonal harmonics up to degree 20 and resonant harmonics up to degree and order 20), atmospheric drag for a time-varying atmosphere, third-body gravity (the sun and moon for an earth satellite), solar radiation pressure with shadowing, and impulsive maneuvers. Analytic averaging is used to remove short-period terms due to the aspherical central planet and third-body gravity. Numerical averaging is used to remove short-period terms due to atmospheric drag and solar radiation pressure.

Dallas, S. S.↗
NASA NTRS1979

The growth of aspherical structure in the universe - Is the Local Supercluster an unusual system

The growth and subsequent collapse of homogeneous ellipsoidal perturbations in a uniform expanding background is considered as a simple model for the formation of large-scale aspherical structures in the observed universe. Numerical calculations of the evolution of such perturbations turn out to be well described by an approximate analytic solution of the equations of motion, and simple relationships are found between the initial shape of a perturbation and its shape and kinematic properties at the time of collapse. Perturbations do not change their shape significantly until they reach a density contrast of order unity. As a result, structures with the kinematic properties of the Local Supercluster should form much more commonly in a low-density universe than in a flat universe. The homogeneity of the local Hubble flow, the motion of the Milky Way with respect to the microwave background, and the flattening of the Local Supercluster can be successfully accounted for by these models, provided that the initial perturbation is sufficiently flattened. Viable models are obtained only if the ratio of the lengths of the two smaller axes of the initial perturbation is at least 3:1 in an Einstein-de Sitter universe or at least 1.8:1 in a universe for which the density parameter (Omega) is of order 0.1, when the protocluster pancakes.

White, S. D. M.↗
NASA NTRS1994

Conversion Of Classical Orbital Elements

OSMEAN is sophisticated program that converts between osculating and mean classical orbital elements. Enables engineer to exploit advantages of each approach for design and planning or orbital trajectories and maneuvers. Converts mean elements to osculating elements or vice-versa. Conversion based on mathematical modeling of all first-order aspherical terrestrial, lunar, and solar gravitational perturbations plus second-order aspherical term based on second-degree central-body zonal perturbation. Written in FORTRAN 77.

Guinn, Joseph R.↗
NASA NTRS1981

Collapses of stellar protogalaxies from aspheric initial conditions

Numerical experimens are presented which were intended to verify the independence of bar formation in rotating galaxy models from special initial conditions. Three-dimensional n-body programs were run starting from aspherical initial conditions characterized by particle rotational and peculiar velocities and offsets from sphericity for a set of 100,000 particles. All the initial configurations examined are observed to collapse to a thin form, overshoot, collapse again and again overshoot, with diameters and central densities similar to those observed under spheric initial conditions. Every aspheric collapse is also found to result in bar formation within two rotation periods, which is even sooner than in initially spherical conditions. In the intermediate stages of collapse, transient sheet patterns are found to be destroyed at asymmetries of 2-3%, while transient rings survived asymmetries of 6-7% but not 15-18%. It is noted that the results may be applicable to galaxy formation in the early universe, and possible mechanisms for the arresting of protogalactic collapse are indicated.

Miller, R. H.↗
NASA NTRS2014

A Multi-Wavelength Investigation of the Radio-Loud Supernova PTF11qcj and its Circumstellar Environment

We present the discovery, classification, and extensive panchromatic (from radio to X-ray) follow-up observations of PTF11qcj, a supernova (SN) discovered by the Palomar Transient Factory (PTF). Our observations with the Karl G. Jansky Very Large Array show that this event is radio-loud: PTF11qcj reached a radio peak luminosity comparable to that of the famous gamma-ray-burst-associated SN 1998bw (L (sub 5 gigahertz) approximates 10 (sup 29) ergs per second per hertz). PTF11qcj is also detected in X-rays with the Chandra Observatory, and in the infrared band with Spitzer. Our multi-wavelength analysis probes the SN interaction with circumstellar material. The radio observations suggest a progenitor mass-loss rate of approximately 10 (sup -4) the mass of the sun per year times (v (sub omega) divided by 1000 kilometers per second), and a velocity of approximately 0.3-0.5 c (the speed of light in a vacuum) for the fastest moving ejecta (at around 10 days after explosion). However, these estimates are derived assuming the simplest model of SN ejecta interacting with a smooth circumstellar wind, and do not account for possible inhomogeneities in the medium and asphericity of the explosion. The radio data show deviations from such a simple model, as well as a late-time re-brightening. The X-ray flux from PTF11qcj is compatible with the high-frequency extrapolation of the radio synchrotron emission (within the large uncertainties). A light echo from pre-existing dust is in agreement with our infrared data. Our pre-explosion data from the PTF suggest that a precursor eruption of absolute magnitude M (sub r) approximately equal to -13 mag may have occurred approximately 2.5 years prior to the SN explosion. Overall, PTF11qcj fits the expectations from the explosion of a Wolf-Rayet star. Precursor eruptions may be a feature characterizing the final pre-explosion evolution of such stars.

Radio↗
NASA NTRS1993

An analysis of nearfield normal mode amplitude anomalies of the Landers earthquake

The 1992 Landers earthquake (M(sub w) = 7.3) occurred in the middle of the TERRAscope network. Long-period Rayleigh waves recorded at the TERRAscope stations (delta less than or = 3 deg) after traveling around the Earth show large amplitude anomalies, one order of magnitude larger than spherical Earth predictions up to a period of about 600 s. The ground motions over the epicentral region at and after the arrival of R4-5 are in phase at all stations. These observations are inconsistent with the nearly vertical strike slip mechanism of the Landers earthquake. Synthetic seismograms for a rotating, elliptic, and laterally heterogeneous Earth model calculated by the variational method agree well with the observed waveforms. Calculations for various 3D Earth models demonstrate that the amplitudes are very sensitive to the large scale aspherical structure in the crust and the mantle. The anomalies for modes shorter than 300 s period can be explained by lateral heterogeneity shallower than the upper mantle. Rotation of the Earth and lower mantle heterogeneity are required to explain mode amplitudes at longer periods. Current whole mantle seismic tomographic models can fully explain the observed amplitudes longer than 300 s. To assess the effect of the high order lateral heterogeneity in the mantle more precise estimate of the crustal correction is required.

Watada, Shingo↗
NASA NTRS2007

Finite Element Analysis of the LOLA Receiver Telescope Lens

This paper presents the finite element stress and distortion analysis completed on the Receiver Telescope lens of the Lunar Orbiter Laser Altimeter (LOLA). LOLA is one of six instruments on the Lunar Reconnaissance Orbiter (LRO), scheduled to launch in 2008. LOLA's main objective is to produce a high-resolution global lunar topographic model to aid in safe landings and enhance surface mobility in future exploration missions. The Receiver Telescope captures the laser pulses transmitted through a diffractive optical element (DOE) and reflected off the lunar surface. The largest lens of the Receiver Telescope, Lens 1, is a 150 mm diameter aspheric lens originally designed to be made of BK7 glass. The finite element model of the Receiver Telescope Lens 1 is comprised of solid elements and constrained in a manner consistent with the behavior of the mounting configuration of the Receiver Telescope tube. Twenty-one temperature load cases were mapped to the nodes based on thermal analysis completed by LOLA's lead thermal analyst, and loads were applied to simulate the preload applied from the ring flexure. The thermal environment of the baseline design (uncoated BK7 lens with no baffle) produces large radial and axial gradients in the lens. These large gradients create internal stresses that may lead to part failure, as well as significant bending that degrades optical performance. The high stresses and large distortions shown in the analysis precipitated a design change from BK7 glass to sapphire.

Matzinger, Elizabeth↗
NASA NTRS2021

Less Atmospheric Radiative Heating By Dust Due to the Synergy of Coarser Size and Aspherical Shape

Mineral dust aerosols cool and warm the atmosphere by scattering and absorbing solar (shortwave: SW) and thermal (longwave: LW) radiation. However, significant uncertainties remain in dust radiative effects, largely due to differences in the dust size distribution and spectral optical properties simulated in Earth system models. Dust models typically underestimate the coarse dust load (more than 2.5 µm in diameter) and assume a spherical shape, which leads to an overestimate of the fine dust load (less than 2.5 µm) after the dust emissions in the models are scaled to match observed dust aerosol optical depth at 550 nm (DAOD550). Here, we improve the simulated dust properties with data sets that leverage measurements of size-resolved dust concentration, asphericity factor, and refractive index in a coupled global chemical transport model with a radiative transfer module. After the adjustment of size-resolved dust concentration and spectral optical properties, the global and annual average of DAOD550 from the simulation increases from 0.023 to 0.029 and falls within the range of a semi-observationally based estimate (0.030 ± 0.005). The reduction of fine dust load after the adjustment leads to a reduction of the SW cooling at the top of the atmosphere (TOA). To improve agreement against a semi-observationally based estimate of the radiative effect efficiency at TOA, we find that a less absorptive SW dust refractive index is required for coarser aspherical dust. Thus, only a minor difference is estimated for the net global dust radiative effect at TOA (−0.08 vs. −0.00 W m−2 on a global scale). Conversely, our sensitivity simulations reveal that the surface warming is substantially enhanced near the strong dust source regions (less cooling to −0.23 from −0.60 W m−2 on a global scale). Thus, less atmospheric radiative heating is estimated near the major source regions (less heating to 0.15 from 0.59 W m−2 on a global scale), because of enhanced LW warming at the surface by the synergy of coarser size and aspherical shape.

simulated dust properties↗
NASA NTRS1995

The homunculus of Eta Carinae: An interacting stellar winds paradigm

We simulate the origin and evolution of the bipolar nebula surrounding Eta Car using numerical two-dimensional gasdynamic models. The generalized interacting stellar winds scenario, wherein a stellar wind interacts with an aspherical circumstellar environment, is adopted. The eruption wind of 1840-1860, which is taken to be spherically symmetric, interacts with a preeruption toroidal density environment. Using reasonable assumptions of initial conditions and eruption parameters based on archival data, we have performed over 30 simulations in an effort to bracket the initial parameters which produce models that best match observations. We find that models with high pole-to-equator density contrasts (greater than 100) and toroidal density configurations nicely account for the observed morphology and kinematics of the homunculus.

Frank, Adam↗
NASA NTRS2002

Optical Testing of Diamond Machined, Aspheric Mirrors for Groundbased, Near-IR Astronomy

The Infrared Multi-Object Spectrometer (IRMOS) is a facility-class instrument for the Kitt Peak National Observatory 4 and 2.1 meter telescopes. IRMOS is a near-IR (0.8-2.5 micron) spectrometer and operates at approximately 80 K. The 6061-T651 aluminum bench and mirrors constitute an athermal design. The instrument produces simultaneous spectra at low- to mid-resolving power (R=lambda/delta lambda= 300-3000) of approximately 100 objects in its 2.8 x 2.0 arcmin field. We describe ambient and cryogenic optical testing of the IRMOS mirrors across a broad range in spatial frequency (figure error, mid-frequency error, and microroughness). The mirrors include three rotationally symmetric, off-axis conic sections, one off-axis biconic, and several flat fold mirrors. The symmetric mirrors include convex and concave prolate and oblate ellipsoids. They range in aperture from 94x86 mm to 286x269 mm and in f-number from 0.9 to 2.4. The biconic mirror is concave and has a 94x76 mm aperture, R(sub x)=377 mm, k(sub x)=0.0778, R(sub y)=407 mm, and k(sub y)=0.1265 and is decentered by -2 mm in X and 227 mm in Y. All of the mirrors have an aspect ratio of approximately 6:1. The surface error fabrication tolerances are less than 10 nm RMS microroughness, 'best effort' for mid-frequency error, and less than 63.3 nm RMS figure error. Ambient temperature (approximately 293 K) testing is performed for each of the three surface error regimes, and figure testing is also performed at approximately 80 K. Operation of the ADE Phaseshift MicroXAM white light interferometer (micro-roughness) and the Bauer Model 200 profilometer (mid-frequency error) is described. Both the sag and conic values of the aspheric mirrors make these tests challenging. Figure testing is performed using a Zygo GPI interferometer, custom computer generated holograms (CGH), and optomechanical alignment fiducials. Cryogenic CGH null testing is discussed in detail. We discuss complications such as the change in prescription with temperature and thermal gradients. Correction for the effect of the dewar window is also covered. We discuss the error budget for the optical test and alignment procedure. Data reduction is accomplished using commercial optical design and data analysis software packages. Results from CGH testing at cryogenic temperatures are encouraging thus far.

Chambers, V. John↗
NASA NTRS2016

Normalization and Implementation of Three Gravitational Acceleration Models

Unlike the uniform density spherical shell approximations of Newton, the consequence of spaceflight in the real universe is that gravitational fields are sensitive to the asphericity of their generating central bodies. The gravitational potential of an aspherical central body is typically resolved using spherical harmonic approximations. However, attempting to directly calculate the spherical harmonic approximations results in at least two singularities that must be removed to generalize the method and solve for any possible orbit, including polar orbits. Samuel Pines, Bill Lear, and Robert Gottlieb developed three unique algorithms to eliminate these singularities. This paper documents the methodical normalization of two of the three known formulations for singularity-free gravitational acceleration (namely, the Lear and Gottlieb algorithms) and formulates a general method for defining normalization parameters used to generate normalized Legendre polynomials and Associated Legendre Functions (ALFs) for any algorithm. A treatment of the conventional formulation of the gravitational potential and acceleration is also provided, in addition to a brief overview of the philosophical differences between the three known singularity-free algorithms.

Eckman, Randy A.↗
NASA NTRS2009

NASA Tech Briefs, March 2009

Topics covered include: Improved Instrument for Detecting Water and Ice in Soil; Real-Time Detection of Dust Devils from Pressure Readings; Determining Surface Roughness in Urban Areas Using Lidar Data; DSN Data Visualization Suite; Hamming and Accumulator Codes Concatenated with MPSK or QAM; Wide-Angle-Scanning Reflectarray Antennas Actuated by MEMS; Biasable Subharmonic Membrane Mixer for 520 to 600 GHz; Hardware Implementation of Serially Concatenated PPM Decoder; Symbolic Processing Combined with Model-Based Reasoning; Presentation Extensions of the SOAP; Spreadsheets for Analyzing and Optimizing Space Missions; Processing Ocean Images to Detect Large Drift Nets; Alternative Packaging for Back-Illuminated Imagers; Diamond Machining of an Off-Axis Biconic Aspherical Mirror; Laser Ablation Increases PEM/Catalyst Interfacial Area; Damage Detection and Self-Repair in Inflatable/Deployable Structures; Polyimide/Glass Composite High-Temperature Insulation; Nanocomposite Strain Gauges Having Small TCRs; Quick-Connect Windowed Non-Stick Penetrator Tips for Rapid Sampling; Modeling Unsteady Cavitation and Dynamic Loads in Turbopumps; Continuous-Flow System Produces Medical-Grade Water; Discrimination of Spore-Forming Bacilli Using spoIVA; nBn Infrared Detector Containing Graded Absorption Layer; Atomic References for Measuring Small Accelerations; Ultra-Broad-Band Optical Parametric Amplifier or Oscillator; Particle-Image Velocimeter Having Large Depth of Field; Enhancing SERS by Means of Supramolecular Charge Transfer; Improving 3D Wavelet-Based Compression of Hyperspectral Images; Improved Signal Chains for Readout of CMOS Imagers; SOI CMOS Imager with Suppression of Cross-Talk; Error-Rate Bounds for Coded PPM on a Poisson Channel; Biomorphic Multi-Agent Architecture for Persistent Computing; and Using Covariance Analysis to Assess Pointing Performance.

Source record↗
NASA NTRS2018

Infrared Computer-Generated Holograms: Design and Application for the WFIRST Grism Using Wavelength-Tuning Interferometry

Interferometers using computer-generated holograms (CGHs) have become the industry standard to accurately measure aspheric optics. The CGH is a diffractive optical element that can create a phase or amplitude distribution and can be manufactured with low uncertainty using modern lithographic techniques. However, these CGHs have conventionally been used with visible light and piezo-shifting interferometers. Testing the performance of transmissive optics in the infrared requires infrared CGHs and an infrared interferometer. Such an instrument is used in this investigation, which introduces its phase shift via wavelength-tuning. A procedure on how to design and manufacture infrared CGHs and how these were successfully used to model and measure the Wide-Field Infrared Survey Telescope grism elements is provided. Additionally, the paper provides a parametric model, simulation results, and calculations of the errors and measurements that come about when interferometers introduce a phase variation via wavelength-tuning interferometry to measure precision aspheres.

Communication↗
NASA NTRS1984

Microwave radiances from precipitating clouds containing aspherical ice, combined phase, and liquid hydrometeors

A numerical algorithm based on Eddington's second approximation to the equation of radiative transfer has been developed in order to compute the radiances with horizontal and vertical polarization that emerge from precipitating clouds. This algorithm yields a rapid solution to problems pertaining to clouds with vertically inhomogeneous structure. Precipitating clouds containing liquid, mixtures of phases, and ice hydrometeors are modelled. It is shown that the lower-frequency radiances are sensitive to liquid precipitation at low altitudes while the higher-frequency radiances are more sensitive to the ice hydrometeors at the cloud tops. The extinction coefficients of aspherical hydrometeors are presented as a function of rainfall rates. The fact that vertically polarized radiances are warmer than horizontally polarized ones at high rainfall rates, with the difference diminishing at lower frequencies, is due to aspherical ice hydrometeors in the upper regions of precipitating clouds.

Wu, R.↗
NASA NTRS1973

Design and mathematical analysis of a three-mirror X-ray telescope based on ATM S-056 X-ray telescope hardware

The mathematical design of the aspheric third mirror for the three-mirror X-ray telescope (TMXRT) is presented, along with the imaging characteristics of the telescope obtained by a ray trace analysis. The present design effort has been directed entirely toward obtaining an aspheric third mirror which will be compatible with existing S-056 paraboloidal-hyperboloidal mirrors. This compatability will facilitate the construction of a prototype model of the TMXRT, since it will only be necessary to fabricate one new mirror in order to obtain a working model.

Foreman, J. W., Jr.↗
NASA NTRS2004

Magnetohydrodynamic Convection in the Outer Core and its Geodynamic Consequences

The Earth's fluid outer core is in vigorous convection through much of the Earth's history. In addition to generating and maintaining Earth s time-varying magnetic field (geodynamo), the core convection also generates mass redistribution in the core and a dynamical pressure field on the core-mantle boundary (CMB). All these shall result in various core-mantle interactions, and contribute to surface geodynamic observables. For example, electromagnetic core-mantle coupling arises from finite electrically conducting lower mantle; gravitational interaction occurs between the cores and the heterogeneous mantle; mechanical coupling may also occur when the CMB topography is aspherical. Besides changing the mantle rotation via the coupling torques, the mass-redistribution in the core shall produce a spatial-temporal gravity anomaly. Numerical modeling of the core dynamical processes contributes in several geophysical disciplines. It helps explain the physical causes of surface geodynamic observables via space geodetic techniques and other means, e.g. Earth's rotation variation on decadal time scales, and secular time-variable gravity. Conversely, identification of the sources of the observables can provide additional insights on the dynamics of the fluid core, leading to better constraints on the physics in the numerical modeling. In the past few years, our core dynamics modeling efforts, with respect to our MoSST model, have made significant progress in understanding individual geophysical consequences. However, integrated studies are desirable, not only because of more mature numerical core dynamics models, but also because of inter-correlation among the geophysical phenomena, e.g. mass redistribution in the outer core produces not only time-variable gravity, but also gravitational core-mantle coupling and thus the Earth's rotation variation. They are expected to further facilitate multidisciplinary studies of core dynamics and interactions of the core with other components of the Earth.

Kuang, Weijia↗