Search NASA⌕ Search

SEARCH · Search NASA

Results for “Assimilation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Assimilation of Geosat Altimetric Data in a Nonlinear Shallow-Water Model of the Indian Ocean by Adjoint Approach. Part II: Some Validation and Interpretation of the Assimilated Results: Some Validation and Interpretation of the Assimilated Results - Part 2

This paper examines the results of assimilating Geosat sea level variations relative to the November 1986-November 1988 mean reference, in a nonlinear reduced-gravity model of the Indian Ocean, Data have been assimilated during one year starting in November 1986 with the objective of optimizing the initial conditions and the yearly averaged reference surface. The thermocline slope simulated by the model with or without assimilation is validated by comparison with the signal, which can be derived from expandable bathythermograph measurements performed in the Indian Ocean at that time. The topography simulated with assimilation on November 1986 is in very good agreement with the hydrographic data. The slopes corresponding to the South Equatorial Current and to the South Equatorial Countercurrent are better reproduced with assimilation than without during the first nine months. The whole circulation of the cyclonic gyre south of the equator is then strongly intensified by assimilation. Another assimilation experiment is run over the following year starting in November 1987. The difference between the two yearly mean surfaces simulated with assimilation is in excellent agreement with Geosat. In the southeastern Indian Ocean, the correction to the yearly mean dynamic topography due to assimilation over the second year is negatively correlated to the one the year before. This correction is also in agreement with hydrographic data. It is likely that the signal corrected by assimilation is not only due to wind error, because simulations driven by various wind forcings present the same features over the two years. Model simulations run with a prescribed throughflow transport anomaly indicate that assimilation is rather correcting in the interior of the model domain for inadequate boundary conditions with the Pacific.

Greiner, Eric↗
DOE OSTI2018

Taxonomic patterns in the nitrogen assimilation of soil prokaryotes

Summary Nitrogen (N) is frequently a limiting nutrient in soil; its availability can govern ecosystem functions such as primary production and decomposition. Assimilation of N by microorganisms impacts the availability of N in soil. Despite its established ecological significance, the contributions of microbial taxa to N assimilation are unknown. Here we measure N uptake and use by microbial phylotypes and taxonomic groups within a diverse assemblage of soil microbes through quantitative stable isotope probing (qSIP) with 15 N. Following incubation with 15 , distinct patterns of 15 N assimilation among taxonomic groups were observed. For instance, glucose addition stimulated 15 N assimilation in most members of Actinobacteria and Proteobacteria but generally decreased 15 N use by Firmicutes and Bacteriodetes. While is considered a preferred and universal source of N to prokaryotes, the majority (> 80%) of N assimilation in our soils could be attributed to a handful of active orders. Characterizing N assimilation of taxonomic groups with 15 N qSIP may provide a basis for understanding how microbial community composition influences N availability in the environment.

Morrissey, Ember M.↗
DOE OSTI2016

Assimilating compact phase space retrievals of atmospheric composition with WRF-Chem/DART: a regional chemical transport/ensemble Kalman filter data assimilation system

This study introduces the Weather Research and Forecasting Model with chemistry/Data Assimilation Research Testbed (WRF-Chem/DART) chemical transport forecasting/data assimilation system together with the assimilation of ''compact phase space retrievals'' of satellite-derived atmospheric composition products. WRF-Chem is a state-of-the-art chemical transport model. DART is a flexible software environment for researching ensemble data assimilation with different assimilation and forecast model options. DART's primary assimilation tool is the ensemble adjustment Kalman filter. WRF-Chem/DART is applied to the assimilation of Terra/Measurement of Pollution in the Troposphere (MOPITT) carbon monoxide (CO) trace gas retrieval profiles. Those CO observations are first assimilated as quasi-optimal retrievals (QORs). Our results show that assimilation of the CO retrievals (i) reduced WRF-Chem's CO bias in retrieval and state space, and (ii) improved the CO forecast skill by reducing the Root Mean Square Error (RMSE) and increasing the Coefficient of Determination ($R^2$). Those CO forecast improvements were significant at the 95 % level. Trace gas retrieval data sets contain (i) large amounts of data with limited information content per observation, (ii) error covariance cross-correlations, and (iii) contributions from the retrieval prior profile that should be removed before assimilation. Those characteristics present challenges to the assimilation of retrievals. This paper addresses those challenges by introducing the assimilation of compact phase space retrievals (CPSRs). CPSRs are obtained by preprocessing retrieval data sets with an algorithm that (i) compresses the retrieval data, (ii) diagonalizes the error covariance, and (iii) removes the retrieval prior profile contribution. Most modern ensemble assimilation algorithms can efficiently assimilate CPSRs. Our results show that assimilation of MOPITT CO CPSRs reduced the number of observations (and assimilation computation costs) by ~ 35 %, while providing CO forecast improvements comparable to or better than with the assimilation of MOPITT CO QORs.

58 GEOSCIENCES↗
NASA NTRS2022

Assimilation of Sea Ice Thickness Derived from Cryosat-2 Along-Track Freeboard Measurements into the Met Office's Forecast Ocean Assimilation Model (FOAM)

The feasibility of assimilating sea ice thickness (SIT) observations derived from CryoSat-2 along-track measurements of sea ice freeboard is successfully demonstrated using a 3D-Var assimilation scheme, NEMOVAR, within the Met Office's global, coupled ocean–sea-ice model, Forecast Ocean Assimilation Model (FOAM). The CryoSat-2 Arctic freeboard measurements are produced by the Centre for Polar Observation and Modelling (CPOM) and are converted to SIT within FOAM using modelled snow depth. This is the first time along-track observations of SIT have been used in this way, with other centres assimilating gridded and temporally averaged observations. The assimilation leads to improvements in the SIT analysis and forecast fields generated by FOAM, particularly in the Canadian Arctic. Arctic-wide observation-minus-background assimilation statistics for 2015–2017 show improvements of 0.75 m mean difference and 0.41 m root-mean-square difference (RMSD) in the freeze-up period and 0.46 m mean difference and 0.33 m RMSD in the ice break-up period. Validation of the SIT analysis against independent springtime in situ SIT observations from NASA Operation IceBridge (OIB) shows improvement in the SIT analysis of 0.61 m mean difference (0.42 m RMSD) compared to a control without SIT assimilation. Similar improvements are seen in the FOAM 5 d SIT forecast. Validation of the SIT assimilation with independent Beaufort Gyre Exploration Project (BGEP) sea ice draft observations does not show an improvement, since the assimilated CryoSat-2 observations compare similarly to the model without assimilation in this region. Comparison with airborne electromagnetic induction (Air-EM) combined measurements of SIT and snow depth shows poorer results for the assimilation compared to the control, despite covering similar locations to the OIB and BGEP datasets. This may be evidence of sampling uncertainty in the matchups with the Air-EM validation dataset, owing to the limited number of observations available over the time period of interest. This may also be evidence of noise in the SIT analysis or uncertainties in the modelled snow depth, in the assimilated SIT observations, or in the data used for validation. The SIT analysis could be improved by upgrading the observation uncertainties used in the assimilation. Despite the lack of CryoSat-2 SIT observations available for assimilation over the summer due to the detrimental effect of melt ponds on retrievals, it is shown that the model is able to retain improvements to the SIT field throughout the summer months due to prior, wintertime SIT assimilation. This also results in regional improvements to the July modelled sea ice concentration (SIC) of 5 % RMSD in the European sector, due to slower melt of the thicker sea ice.

Emma K. Fiedler↗
NASA NTRS1998

Efficient Methods to Assimilate Satellite Retrievals Based on Information Content: Suboptimal Retrieval Assimilation - Part 2

One of the outstanding problems in data assimilation has been and continues to be how best to utilize satellite data while balancing the tradeoff between accuracy and computational cost. A number of weather prediction centers have recently achieved remarkable success in improving their forecast skill by changing the method by which satellite data are assimilated into the forecast model from the traditional approach of assimilating retrievals to the direct assimilation of radiances in a variational framework. The operational implementation of such a substantial change in methodology involves a great number of technical details, e.g., pertaining to quality control procedures, systematic error correction techniques, and tuning of the statistical parameters in the analysis algorithm. Although there are clear theoretical advantages to the direct radiance assimilation approach, it is not obvious at all to what extent the improvements that have been obtained so far can be attributed to the change in methodology, or to various technical aspects of the implementation. The issue is of interest because retrieval assimilation retains many practical and logistical advantages which may become even more significant in the near future when increasingly high-volume data sources become available. The central question we address here is: how much improvement can we expect from assimilating radiances rather than retrievals, all other things being equal? We compare the two approaches in a simplified one-dimensional theoretical framework, in which problems related to quality control and systematic error correction are conveniently absent. By assuming a perfect radiative transfer model and perfect knowledge of radiance and background error covariances, we are able to formulate a nonlinear local error analysis for each assimilation method. Direct radiance assimilation is optimal in this idealized context, while the traditional method of assimilating retrievals is suboptimal because it ignores the cross-covariances between background errors and retrieval errors. We show that interactive retrieval assimilation (where the same background used for assimilation is also used in the retrieval step) is equivalent to direct assimilation of radiances with suboptimal analysis weights. We illustrate and extend these theoretical arguments with several one-dimensional assimilation experiments, where we estimate vertical atmospheric profiles using simulated data from both the High-resolution InfraRed Sounder 2 (HIRS2) and the future Atmospheric InfraRed Sounder (AIRS).

Joiner, J.↗
NASA NTRS2017

Assimilation of AERONET and MODIS AOT Observations Using Variational and Ensemble Data Assimilation Methods and Its Impact on Aerosol Forecasting Skill

Data assimilation of Aerosol Robotic Network (AERONET) and Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical thickness (AOT) for aerosol forecasting was tested within the Navy Aerosol Analysis Prediction System (NAAPS) framework, using variational and ensemble data assimilation methods. Navy aerosol forecasting currently makes use of a deterministic NAAPS simulation coupled to Navy Variational Data Assimilation System for aerosol optical depth, a two-dimensional variational data assimilation system, for MODIS AOT assimilation. An ensemble version of NAAPS (ENAAPS) coupled to an ensemble adjustment Kalman filter (EAKF) from the Data Assimilation Research Testbed was recently developed, allowing for a range of data assimilation and forecasting experiments to be run with deterministic NAAPS and ENAAPS. The main findings are that the EAKF, with its flow-dependent error covariances, makes better use of sparse observations such as AERONET AOT. Assimilating individual AERONET observations in the two-dimensional variational system can increase the analysis errors when observations are located in high AOT gradient regions. By including AERONET with MODIS AOT assimilation, the magnitudes of peak aerosol events (AOT> 1) were better captured with improved temporal variability, especially in India and Asia where aerosol prediction is a challenge. Assimilating AERONET AOT with MODIS had little impact on the 24 h forecast skill compared to MODIS assimilation only, but differences were found downwind of AERONET sites. The 24 h forecast skill was approximately the same for forecasts initialized with analyses from AERONET AOT assimilation alone compared to MODIS assimilation, particularly in regions where the AERONET network is dense; including the United States and Europe, indicating that AERONET could serve as a backup observation network for over-land synoptic-scale aerosol events.

Rubin, Juli I.↗
NASA NTRS2002

Monitoring and Assimilation of MLS Measurements in the DAO Ozone Data Assimilation System

Since 1999 the DAO (Data Assimilation Office) at NASA Goddard has operationally assimilated ozone measurements in near real time. Currently, the assimilation system analyzes SBUV profile and total column measurements using an off line CTM with parameterized chemistry within the 3D-PSAS algorithm. During the last year the assimilation system was modified to either monitor or actively assimilate MLS (Microwave Limb Sounder) measurements in conjunction with the active assimilation of TOMS total column and SBUV profiles. It is expected that the active assimilation of MLS profiles will improve analysis results in two ways. First, there should be an improvement in the vertical resolution. Second, there should be an improvement in regions where SBUV measurements do not exist (such as in the polar night). A series of experiments using UARS (Upper Atmospheric Research Satellite) MLS data from December 1991 to March 1992 were run. In these experiments MLS data was either monitored in conjunction with active assimilation of the SBUV profile and TOMS total column measurements, or some combination of MLS, TOMS, and SBUV observations was actively assimilated. Monitoring of MLS data indicated that the MLS observations contain verifiable information that should improve the vertical structure of the analysis results, especially below the ozone peak and above the tropopause. The monitoring also substantiated the potential to improve the assimilation in the polar night. Active assimilation of MLS data does indeed improve the analysis results in these two ways, although the quality of the improvements is not uniform. This suggests that refinement of the specification of the error covariances might be needed to optimize the system. In addition it may be necessary to account for biases between the different sources of ozone information.

Atlas, Robert↗
NASA NTRS2014

Assimilation of MODIS Snow Cover Through the Data Assimilation Research Testbed and the Community Land Model Version 4

To improve snowpack estimates in Community Land Model version 4 (CLM4), the Moderate Resolution Imaging Spectroradiometer (MODIS) snow cover fraction (SCF) was assimilated into the Community Land Model version 4 (CLM4) via the Data Assimilation Research Testbed (DART). The interface between CLM4 and DART is a flexible, extensible approach to land surface data assimilation. This data assimilation system has a large ensemble (80-member) atmospheric forcing that facilitates ensemble-based land data assimilation. We use 40 randomly chosen forcing members to drive 40 CLM members as a compromise between computational cost and the data assimilation performance. The localization distance, a parameter in DART, was tuned to optimize the data assimilation performance at the global scale. Snow water equivalent (SWE) and snow depth are adjusted via the ensemble adjustment Kalman filter, particularly in regions with large SCF variability. The root-mean-square error of the forecast SCF against MODIS SCF is largely reduced. In DJF (December-January-February), the discrepancy between MODIS and CLM4 is broadly ameliorated in the lower-middle latitudes (2345N). Only minimal modifications are made in the higher-middle (4566N) and high latitudes, part of which is due to the agreement between model and observation when snow cover is nearly 100. In some regions it also reveals that CLM4-modeled snow cover lacks heterogeneous features compared to MODIS. In MAM (March-April-May), adjustments to snowmove poleward mainly due to the northward movement of the snowline (i.e., where largest SCF uncertainty is and SCF assimilation has the greatest impact). The effectiveness of data assimilation also varies with vegetation types, with mixed performance over forest regions and consistently good performance over grass, which can partly be explained by the linearity of the relationship between SCF and SWE in the model ensembles. The updated snow depth was compared to the Canadian Meteorological Center (CMC) data. Differences between CMC and CLM4 are generally reduced in densely monitored regions.

data assimilation↗
NASA NTRS2000

Towards a Comprehensive Dynamic-chemistry Assimilation for Eos-Chem: Plans and Status in NASA's Data Assimilation Office

In order to support the EOS-Chem project, a comprehensive assimilation package for the coupled chemical-dynamical system is being developed by the Data Assimilation Office at NASA GSFC. This involves development of a coupled chemistry/meteorology model and of data assimilation techniques for trace species and meteorology. The model is being developed using the flux-form semi-Lagrangian dynamical core of Lin and Rood, the physical parameterizations from the NCAR Community Climate Model, and atmospheric chemistry modules from the Atmospheric Chemistry and Dynamics branch at NASA GSFC. To date the following results have been obtained: (i) multi-annual simulations with the dynamics-radiation model show the credibility of the package for atmospheric simulations; (ii) initial simulations including a limited number of middle atmospheric trace gases reveal the realistic nature of transport mechanisms, although there is still a need for some improvements. Samples of these results will be shown. A meteorological assimilation system is currently being constructed using the model; this will form the basis for the proposed meteorological/chemical assimilation package. The latter part of the presentation will focus on areas targeted for development in the near and far terms, with the objective of Providing a comprehensive assimilation package for the EOS-Chem science experiment. The first stage will target ozone assimilation. The plans also encompass a reanalysis (ReSTS) for the 1991-1995 period, which includes the Mt. Pinatubo eruption and the time when a large number of UARS observations were available. One of the most challenging aspects of future developments will be to couple theoretical advances in tracer assimilation with the practical considerations of a real environment and eventually a near-real-time assimilation system.

Pawson, Steven↗
NASA NTRS2001

Assimilation of Cloud- and Land-Affected TOVS/ATOVS Level 1B Radiances in DAO's Next Generation Finite-Volume Data Assimilation System

The Physical-space/Finite-volume Data Assimilation System (fvDAS) is the next generation global atmospheric data assimilation system in development at the Data Assimilation Office (DAO) at NASA's Goddard Space Flight Center. It is based on a new finite-volume general circulation model jointly developed by NASA and NCAR, and on the Physical-Space Statistical Analysis System (PSAS) developed at the DAO. In this talk we will focus on the assimilation of data from the (Advanced) TIROS Operational Vertical Sounder (ATOVS), with emphasis on the impact of cloud- and land-affected level 1B radiances. Recently, it has been shown that the use of observations from satellite-borne microwave and infrared radiometers in data assimilation systems consistently increases forecast skill. Considerable effort has been expended over the past two decades, particularly with the (Advanced) TIROS Operational Vertical Sounder (ATOVS), to achieve this result. The positive impact on forecast skill has resulted from improvements in quality control algorithms, systematic error correction schemes, and more sophisticated data assimilation algorithms. Despite these advances, there are still many issues regarding the use of satellite data in data assimilation systems that remain unresolved. In particular, most operational centers still do not assimilate cloud- and land-affected TOVS data. In this study, we evaluate the impact of assimilating cloud-and land-affected TOVS/ATOVS level 1B data in DAO's next generation fvDAS, using a 1D variational scheme. We will discuss the impact of these data on both tropospheric and stratospheric forecasts, as well as on the general aspects of the earth climate system.

Joiner, J.↗
NASA NTRSDate not supplied

GEOS Constituent Data Assimilation Beyond Aura MLS: Assimilating NASA SAGE III/ISS Profiles of Stratospheric Water Vapor and Ozone

Ozone and water vapor in the lower stratosphere are important trace gases for atmospheric chemistry and radiative budget. The Stratospheric Aerosol and Gas Experiment (SAGE) missions have been crucial in monitoring the stratospheric ozone loss and the subsequent recovery as well as the trends in water vapor linked to surface temperature trends. The SAGE III instrument aboard the International Space Station (ISS) continues the SAGE mission record, with high vertical resolution profiles of ozone and water vapor available since mid 2017. The NASA GEOS Earth system model has the new capability to assimilate multi-constituents from ground and space-based instruments using the GEOS Constituent Data Assimilation System (CoDAS). The recently released MERRA-2 Stratospheric Composition Reanalysis with Aura MLS (M2-SCREAM) assimilates version 4.2 MLS ozone, water vapor and other chemically-reactive species with the NASA GEOS model coupled to a stratospheric-only chemistry mechanism and transport constrained to the MERRA-2 reanalysis. While the number of solar occultation observations a day from SAGE III/ISS is about 1% of the total number of profiles observed globally by MLS, the chemical timescales of ozone and water vapor in the lower stratosphere are long enough that the SAGE III/ISS data may provide a useful constraint on the assimilated product. Using the same GEOS CoDAS configuration as M2-SCREAM, we will present a series of experiments to investigate if ozone and water vapor trends are consistent with the assimilation of SAGE observations with and without Aura retrievals, and to determine if the assimilation of SAGE observations produces a steady product for trend analysis, especially as the end of the Aura mission nears. In our experiments, assimilating only SAGE III/ISS water vapor profiles results in water vapor fields more consistent with experiments that assimilate MLS v5; however, in the polar regions SAGE III/ISS observations are not available and the values are unconstrained. We are encouraged by the positive benefit assimilating the less frequent SAGE III/ISS observations has on stratospheric composition. Sensitivity experiments such as these will allow us to assess the added value of SAGE data for continued monitoring of the stratospheric composition for climate and ozone recovery assessments.

SAGE↗
NASA NTRSDate not supplied

GEOS Constituent Data Assimilation Beyond Aura MLS: Assimilating NASA SAGE III/ISS Profiles of Stratospheric Water Vapor

Ozone and water vapor in the lower stratosphere are important trace gases for atmospheric chemistry and radiative budget. The Stratospheric Aerosol and Gas Experiment (SAGE) missions have been crucial in monitoring the stratospheric ozone loss and the subsequent recovery as well as the trends in water vapor linked to surface temperature trends. The SAGE III instrument aboard the International Space Station (ISS) continues the SAGE mission record, with high vertical resolution profiles of ozone and water vapor available since mid 2017. The NASA GEOS Earth system model has the new capability to assimilate multi-constituents from ground and space-based instruments using the GEOS Constituent Data Assimilation System (CoDAS). The recently released MERRA-2 Stratospheric Composition Reanalysis with Aura MLS (M2-SCREAM) assimilates version 4.2 MLS ozone, water vapor and other chemically-reactive species with the NASA GEOS model coupled to a stratospheric-only chemistry mechanism and transport constrained to the MERRA-2 reanalysis. While the number of solar occultation observations a day from SAGE III/ISS is about 1% of the total number of profiles observed globally by MLS, the chemical timescales of ozone and water vapor in the lower stratosphere are long enough that the SAGE III/ISS data may provide a useful constraint on the assimilated product. Using the same GEOS CoDAS configuration as M2-SCREAM, we will present a series of experiments to investigate if water vapor trends are consistent with the assimilation of SAGE observations with and without Aura retrievals, and to determine if the assimilation of SAGE observations produces a steady product for trend analysis, especially as the end of the Aura mission nears. In our experiments, assimilating only SAGE III/ISS water vapor profiles results in water vapor fields more consistent with experiments that assimilate MLS v5; however, in the polar regions SAGE III/ISS observations are not available and the modelled values are unconstrained. We are encouraged by the positive benefit assimilating the less frequent SAGE III/ISS observations has on stratospheric composition. Sensitivity experiments such as these will allow us to assess the added value of SAGE data for continued monitoring of the stratospheric composition for climate and ozone recovery assessments.

K Emma Knowland↗
DOE OSTI2019

Delineating Facies Spatial Distribution by Integrating Ensemble Data Assimilation and Indicator Geostatistics with Level-Set Transformation

The facies-based approach has been widely adopted to delineate an aquifer into distinct geological units with unique distributions of hydraulic, physical, and/or chemical properties. The recent development in ensemble-based data assimilation methods allows both the direct and indirect data to be used to improve facies delineation. A major difficulty in those applications is to honor the spatial continuity and avoid overfitting after data assimilation. We introduce a new facies delineation framework to integrate ensemble data assimilation with traditional transition probability-based geostatistics. A level-set concept is used to parametrize discrete facies indicators and for updating facies shape. During the iterative data assimilation process, we impose spatial continuity by conditioning facies field generation on points selected adaptively based on their sensitivity to observation data. This reconditioning step is a key step to maintain spatial continuity and overcome over-fitting problems in inversion. We selected two examples to evaluate the performance of the new framework in estimating facies-based permeability field. The first example is a two-dimensional synthetic system with transient head data induced by pumping tests used for delineating two facies. The second example is a three-dimensional case with three facies, conceptualized from a field tracer experiment within the Columbia River corridor in Washington State, USA. Both examples demonstrate that the new method can adequately capture the spatial pattern of hydrofacies with reconditioning, which leads to the improved prediction of system behaviors.

Song, Xuehang↗
DOE OSTI2016

Spectral characteristics of background error covariance and multiscale data assimilation

The spatial resolutions of numerical atmospheric and oceanic circulation models have steadily increased over the past decades. Horizontal grid spacing down to the order of 1 km is now often used to resolve cloud systems in the atmosphere and sub-mesoscale circulation systems in the ocean. These fine resolution models encompass a wide range of temporal and spatial scales, across which dynamical and statistical properties vary. In particular, dynamic flow systems for small scales can become spatially localized and temporarily intermittent. An analysis shows that the background correlation length scale is larger than 75 km for streamfunctions, even for a 2-km resolution model, and larger than 25 km for water vapor mixing ratios. The theoretical analyses suggest that such correlation length scales prevent the currently used data assimilation schemes from constraining spatial scales smaller than 150 km for streamfunctions and 50 km for water vapor mixing ratios. These results highlight the necessity of fundamentally modifying the currently used data assimilation algorithm for assimilating high-resolution observations into the aforementioned fine resolution models. A multiscale methodology based on scale decomposition is suggested, and challenges are discussed.

Li, Zhijin↗
NASA NTRS2022

Evaluation of High Mountain Asia-Land Data Assimilation System (version 1) from 2003 to 2016: 2. The impact of assimilating satellite-based snow cover and freeze/thaw observations into a land surface model

This second paper of the two-part series focuses on demonstrating the impact of assimilating satellite-based snow cover and freeze/thaw observations into the hyper-resolution, offline terrestrial modeling system used for the High Mountain Asia (HMA) region from 2003 to 2016. To this end, this study systematically evaluates a total of six sets of 0.01° (∼1 km) model simulations forced by different precipitation forcings, with and without the dual assimilation scheme enabled, at point-scale, basin-scale, and domain-scale. The key variables of interest include surface net shortwave radiation, surface net longwave radiation, skin temperature, near-surface soil temperature, snow depth, snow water equivalent (SWE), and total runoff. First, the point-scale assessment is mainly conducted via evaluating against ground-based measurements. In general, the assimilation enabled estimates are better than no-assimilation counterparts. Second, the basin-scale runoff assessment demonstrates that across three snow-dominated basins, the assimilation enabled experiment yields systematic improvements in all goodness-of-fit statistics through mitigating the negative effects brought by the fixed long-term precipitation correction factors. For example, when forced by the bias-corrected precipitation, the assimilation-enabled experiment improves the bias by 69%, the root-mean-squared error by 30%, and the unbiased root-mean-squared error by 18% (relative to the no-assimilation counterpart). Finally, the domainscale assessment is conducted via evaluating against satellite-based SWE and skin temperature products. Both sets of domain-scale analysis further corroborate the findings in the point-scale evaluations. Overall, this study suggests the benefits of the proposed multi-variate assimilation system in improving the cryospherichydrological process within a land surface model for use in HMA.

Yuan Xue↗
NASA NTRS2022

Evaluation of High Mountain Asia-Land Data Assimilation System (version 1) from 2003 to 2016: 2. The impact of assimilating satellite-based snow cover and freeze/thaw observations into a land surface model

This second paper of the two-part series focuses on demonstrating the impact of assimilating satellite-based snow cover and freeze/thaw observations into the hyper-resolution, offline terrestrial modeling system used for the High Mountain Asia (HMA) region from 2003 to 2016. To this end, this study systematically evaluates a total of six sets of 0.01° (∼1 km) model simulations forced by different precipitation forcings, with and without the dual assimilation scheme enabled, at point-scale, basin-scale, and domain-scale. The key variables of interest include surface net shortwave radiation, surface net longwave radiation, skin temperature, near-surface soil temperature, snow depth, snow water equivalent (SWE), and total runoff. First, the point-scale assessment is mainly conducted via evaluating against ground-based measurements. In general, the assimilation enabled estimates are better than no-assimilation counterparts. Second, the basin-scale runoff assessment demonstrates that across three snow-dominated basins, the assimilation enabled experiment yields systematic improvements in all goodness-of-fit statistics through mitigating the negative effects brought by the fixed long-term precipitation correction factors. For example, when forced by the bias-corrected precipitation, the assimilation-enabled experiment improves the bias by 69%, the root-mean-squared error by 30%, and the unbiased root-mean-squared error by 18% (relative to the no-assimilation counterpart). Finally, the domain-scale assessment is conducted via evaluating against satellite-based SWE and skin temperature products. Both sets of domain-scale analysis further corroborate the findings in the point-scale evaluations. Overall, this study suggests the benefits of the proposed multi-variate assimilation system in improving the cryospheric-hydrological process within a land surface model for use in HMA.

Yuan Xue↗
NASA NTRS1995

Assimilation of Altimeter Data into a Quasigeostrophic Model of the Gulf Stream System: Assimilation Results - Part 2

The improvement in the climatological behavior of a numerical model as a consequence of the assimilation of surface data is investigated. The model used for this study is a quasigeostrophic (QG) model of the Gulf Stream region. The data that have been assimilated are maps of sea surface height that have been obtained as the superposition of sea surface height variability deduced from the Geosat altimeter measurements and a mean field constructed from historical hydrographic data. The method used for assimilating the data is the nudging technique. Nudging has been implemented in such a way as to achieve a high degree of convergence of the surface model fields toward the observations. Comparisons of the assimilation results with available in situ observations show a significant improvement in the degree of realism of the climatological model behavior, with respect to the model in which no data are assimilated. The remaining discrepancies in the model mean circulation seem to be mainly associated with deficiencies in the mean component of the surface data that are assimilated. On the other hand, the possibility of building into the model more realistic eddy characteristics through the assimilation of the surface eddy field proves very successful in driving components of the mean model circulation that are in relatively good agreement with the available observations. Comparisons with current meter time series during a time period partially overlapping the Geosat mission show that the model is able to 'correctly' extrapolate the instantaneous surface eddy signals to depths of approximately 1500 m. The correlation coefficient between current meter and model time series varies from values close to 0.7 in the top 1500 m to values as low as 0.1-0.2 in the deep ocean.

Capotondi, Antonietta↗