Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Microgravity Effects on Nonequilibrium Melt Processing of Neodymium Titanate: Thermophysical Properties, Atomic Structure, Glass Formation and Crystallization

The relationships between materials processing and structure can vary between terrestrial and reduced gravity environments. As one case study, we compare the nonequilibrium melt processing of a rare-earth titanate, nominally 83TiO 2 -17Nd 2 O 3 , and the structure of its glassy and crystalline products. Density and thermal expansion for the liquid, supercooled liquid, and glass are measured over 300–1850 °C using the Electrostatic Levitation Furnace (ELF) in microgravity, and two replicate density measurements were reproducible to within 0.4%. Cooling rates in ELF are 40–110 °C s −1 lower than those in a terrestrial aerodynamic levitator due to the absence of forced convection. X-ray/neutron total scattering and Raman spectroscopy indicate that glasses processed on Earth and in microgravity exhibit similar atomic structures, with only subtle differences that are consistent with compositional variations of ~2 mol. % Nd 2 O 3 . The glass atomic network contains a mixture of corner- and edge-sharing Ti-O polyhedra, and the fraction of edge-sharing arrangements decreases with increasing Nd 2 O 3 content. X-ray tomography and electron microscopy of crystalline products reveal substantial differences in microstructure, grain size, and crystalline phases, which arise from differences in the melt processes.

thermophysical properties↗
NASA NTRS1988

Investigations on the usefulness of the Massively Parallel Processor for study of electronic properties of atomic and condensed matter systems

The usefulness of the Massively Parallel Processor (MPP) for investigation of electronic structures and hyperfine properties of atomic and condensed matter systems was explored. The major effort was directed towards the preparation of algorithms for parallelization of the computational procedure being used on serial computers for electronic structure calculations in condensed matter systems. Detailed descriptions of investigations and results are reported, including MPP adaptation of self-consistent charge extended Hueckel (SCCEH) procedure, MPP adaptation of the first-principles Hartree-Fock cluster procedure for electronic structures of large molecules and solid state systems, and MPP adaptation of the many-body procedure for atomic systems.

Das, T. P.↗
NASA NTRS1992

Performance and properties of atomic oxygen protective coatings for polymeric materials

Such large LEO spacecraft as the Space Station Freedom will encounter high atomic oxygen fluences which entail the use of protective coatings for their polymeric structural materials. Such coatings have demonstrated polymer mass losses due to oxidation that are much smaller than those of unprotected materials. Attention is here given to protective and/or electrically conductive coatings of SiO(x), Ge, and indium-tin oxide which have been exposed to atomic oxygen in order to ascertain mass loss, electrical conductivity, and optical property dependence on atomic oxygen exposure.

Banks, Bruce A.↗
NASA NTRS1992

The relation of dust and atomic gas properties of galaxies

The way in which the neutral atomic hydrogen and far-IR emission from galaxies relate to their environments is shown. It is found that isolated and interacting galaxies display a fairly narrow range of a temperature-adjusted 'H I/100-micron index', suggesting that atomic gas-to-dust ratios are relatively constant among most galaxies. Isolated normal galaxies are used to develop a fiducial standard for the H I/100-micron index, against which galaxies in other environments are compared. Galaxies undergoing tidal interactions prove to have the same value for the index once the proper temperature adjustment is applied according to their FIR color. Applied to clusters, the H I/100-micron index shows a clear discrimination between galaxies whose H I is 'stripped' or 'unstripped', implying that there is about 6 times less H I in stripped galaxies relative to the 100-micron-emitting dust. The stripped galaxies also appear to have a slightly lower mean dust temperature, which is surprising since the stripping process might be expected to remove preferentially cooler than average dust from the outer disk.

Spitzak, John G.↗
NASA NTRS1998

Substrate Effects on Electronic Properties of Atomic Chains

Atomic chains, precise structures of adatoms created on an atomically regulated surface, are candidates for constituent elements in future electronics. It was predicted that Si chains were metallic and Mg chains were semiconducting, and a doping method was also discussed. The substrate was assumed to work as a non-interacting template holding the adatoms. However, this scheme requires a low-temperature environment so that the adatoms will not displace from their ideal positions due to unwanted thermal agitation. For better structural stability, we may seek a scheme to allow the adatoms to form chemical bonding with the substrate atoms and secure their positions. The chemical bonding has two major effects on the chain electronic properties. First, only the remaining s and p orbitals in an adatom not used for the chemical bonding can decide chain band structures, rather than the full set of orbitals previously assumed. Second, because of a possible HOMO energy difference between adatom and substrate atom, semiconducting chains are unintentionally doped. These effects are studied with a self-consistent tight-binding method with universal parameters. With one adatom per unit cell, adatom chains are semiconducting: (1) if adatoms are of group III and form one chemical bond per adatom, or (2) if adatoms are of group IV and form two chemical bonds. 'Me previous result [I I of realizing semiconducting chains by group II adatoms without chemical bonds is consistent with this picture. When the HOMO energy in an adatom is shallower than that in a substrate atom, the entire chain is positively polarized, unintentionally achieving p-type doping. When deeper, the chain is negatively charged, achieving n-type doping.

Yamada, Toshishige↗
NASA NTRS1981

An investigation of air solubility in Jet A fuel at high pressures

Problems concerned with the supercritical injection concept are discussed. Supercritical injection involves dissolving air into a fuel prior to injection. A similar effect is obtained by preheating the fuel so that a portion of the fuel flashes when its pressure is reduced. Flashing improves atomization properties and the presence of air in the primary zone of a spray flame reduces the formation of pollutants. The investigation is divided into three phases: (1) measure the solubility and density properties of fuel/gas mixtures, including Jet A/air, at pressures and correlate these results using theory; (2) investigate the atomization properties of flashing liquids, including fuel/dissolved gas systems. Determine and correlate the effect of inlet properties and injector geometry on mass flow rates, Sauter mean diameter and spray angles; (3) examine the combustion properties of flashing injection in an open burner flame, considering flame shape and soot production.

Faeth, G. M.↗
NASA NTRS1987

Containerless Atomic-Fluorescence Property Measurements

Report describes studies conducted to establish and verify use of laser-induced fluorescence in monitoring and controlling high-temperature containerless processes. Specimens levitated by gas jets or electromagnetic fields and heated by laser beams or electromagnetic induction while being irradiated and detected by fluorescence technique. Makes quantitative and qualitative comparisons among three new methods of temperature measurement; all rely on laser-induced fluorescence. One method gas-density thermometry with seed gas. Other two methods involve measurements of velocities of evaporating atoms or of population ratios of different electronic states.

Nordine, P.↗
NASA NTRS1971

Transport properties of atomic hydrogen.

Determination of a new set of values for the coefficients of viscosity and thermal conductivity of atomic hydrogen in the range from 1 to 100,000 K. The estimated error is about 5%. Quantal theory was used for low temperatures and classical theory for high temperatures. There is excellent agreement between the two theories as low as 20 K.-

Allison, A. C.↗
NASA NTRS1980

Atomization of broad specification aircraft fuels

The atomization properties of liquid fuels for the potential use in aircraft gas turbine engines are discussed. The significance of these properties are addressed with respect to the ignition and subsequent combustion behavior of the fuel spray/air mixture. It is shown that the fuel properties which affect the atomization behavior (viscosity, surface tension, and density) are less favorable for the broad specification fuels as compared to with those for conventional fuels.

Skifstad, J. G.↗
NASA NTRS1998

Substrate Effects on Electronic Properties of Atomic Chains

When the device size is reduced down to 0.07 micrometers, the number of dopant atoms in the channel will no longer be macroscopic, typically less than a hundred. A spatial distribution of these dopant atoms will fluctuate statistically from device to device even in identically designed devices, and this places a serious limitation for integration. It is, however, impractical to control dopant positions within atomic dimension. One fundamental solution to this problem is to create electronics with atomically precise, but preferably simple structures. Atomic chains, precise structures of adatoms created on an atomically regulated surface, are candidates for constituent components in future electronics. All the adatoms will be placed at designated positions on the substrate, and all the device structures will be precise, free from any deviations. It was predicted using the tight-binding calculation with universal parameters that silicon chains were metallic and magnesium chains were semiconducting regardless of the lattice spacing, and a possible doping method was also proposed. In these treatments, the substrate was assumed to serve as a non-interacting template holding the adatoms without a formation of chemical bonding with substrate atoms. However, this scheme may not be easy to implement experimentally. Adatoms will have to be fixed with a van der Waals force on the substrate, but the force is generally weak and an extremely low temperature environment has to be prepared to suppress their unwanted thermal displacement. It may be logical to seek a scheme to allow the adatoms to form chemical bonding with the substrate atoms and secure their positions. The substrate effects are studied in detail.

Yamada, Toshishige↗
NASA NTRS1970

Long-range interatomic dipoles

Interatomic electric dipole moment coefficient derivation by approximation involving accessible atomic properties, noting application to H atoms

Brown, W. B.↗
NASA NTRS1982

Atomization and combustion properties of flashing injectors

Flashing injection involves expanding a fluid through an injector until a supersaturated state is reached, causing a portion of the fluid to flash to a vapor. This investigation considered the flow, atomization and spreading properties of flashing injectors flowing liquids containing dissolved gases (Jet A/air) as well as superheated liquids (Freon 11). The use of a two stage expansion process, separated by an expansion chamber, was found to be beneficial for good atomization properties of flashing injection - particularly for dissolved gas systems. Both locally homogeneous and separated flow models provided good predictions of injector flow properties. Conventional correlations for drop sizes from pressure atomized and airblast injectors were successfully modified, using the separated flow model to prescribe injector exit conditions, to correlate drop size measurements. Additional experimental results are provided for spray angle and combustion properties of sprays from flashing injectors.

Solomon, A. S. P.↗
NASA NTRS1988

Transport properties of ground state oxygen atoms

The transport properties of dilute monatomic gases depend on the two-body interactions between like atoms. When two ground-state oxygen atoms interact, they can follow any of 18 potential energy curves corresponding to O2, all of which contribute to the transport properties of the ground-state atoms. Transport collision integrals have been calculated for those interactions with an attractive minimum in the potential, and repulsive ab initio potential-energy curves have been accurately represented. Results are given for viscosity, thermal conductivity, and diffusion and they are compared with previous theoretical calculations.

Holland, Paul M.↗
NASA NTRS1987

Containerless high temperature property measurements by atomic fluorescence

Containerless high temperature processing and material property measurements are discussed. Researchers developed methods for non-contact suspension, heating, and property measurement for materials at temperatures up to 3,680K, the melting point of tungsten. New, scientifically interesting results were obtained in Earth-based research. These results and the demonstration of new methods and techniques form a basis for further advances under the low gravity environment of space where containerless conditions are more easily achieved. Containerless high temperature material property investigations that have been completed in this and our earlier projects include measurements of fluorine LaB sub 6 reaction kinetics at 1,000 to 1,500K; optical property measurements on sapphire (Al2O3) at temperatures up to the melting point (2,327K); and vapor pressure measurements for LaB sub 6 at 2,000 to 2,500K, for molybdenum up to 2,890K and for tungsten up to 3,680K. Gas jet levitation which is applicable to any solid material, and electromagnetic levitation of electrical conductors were used to suspend the materials of interest. Non-contact heating and property measurements were achieved by optical techniques, i.e., laser heating, laser induced fluorescence measurements of vapor concentrations, and optical pyrometry for specimen temperatures.

Nordine, Paul C.↗
NASA NTRS1989

General contraction of Gaussian basis sets. Part 2: Atomic natural orbitals and the calculation of atomic and molecular properties

A recently proposed scheme for using natural orbitals from atomic configuration interaction (CI) wave functions as a basis set for linear combination of atomic orbitals (LCAO) calculations is extended for the calculation of molecular properties. For one-electron properties like multipole moments, which are determined largely by the outermost regions of the molecular wave function, it is necessary to increase the flexibility of the basis in these regions. This is most easily done by uncontracting the outmost Gaussian primitives, and/or by adding diffuse primitives. A similar approach can be employed for the calculation of polarizabilities. Properties which are not dominated by the long-range part of the wave function, such as spectroscopic constants or electric field gradients at the nucleus, can generally be treated satisfactorily with the original atomic natural orbital (ANO) sets.

Almloef, Jan↗
NASA NTRS1990

General contraction of Gaussian basis sets. II - Atomic natural orbitals and the calculation of atomic and molecular properties

A recently proposed scheme for using natural orbitals from atomic configuration interaction wave functions as a basis set for linear combination of atomic orbitals (LCAO) calculations is extended for the calculation of molecular properties. For one-electron properties like multipole moments, which are determined largely by the outermost regions of the molecular wave function, it is necessary to increase the flexibility of the basis in these regions. This is most easily done by uncontracting the outermost Gaussian primitives, and/or by adding diffuse primitives. A similar approach can be employed for the calculation of polarizabilities. Properties which are not dominated by the long-range part of the wave function, such as spectroscopic constants or electric field gradients at the nucleus, can generally be treated satisfactorily with the original atomic natural orbital sets.

Almlof, Jan↗
NASA NTRS1992

Results of examination of the A276 white and Z306 black thermal control paint disks flown on LDEF

Specimens of A276 white and Z306 black thermal control paints were analyzed for the effects of space environmental exposure as part of the Long Duration Exposure Facility (LDEF) Materials Special Investigation Group activity. The specimens, actually disks or spots of paint on tray clamps, were located at regular intervals on all LDEF longerons and intercostals. The principle conclusions from the analysis are: UV exposure degraded the surface resin of A276 paint, with coating solar absorptance increasing with UV exposure; contamination, though detected, was not enough to have adversely affected optical properties; atomic oxygen eroded resin on specimens with incidence angles of up to 100 deg; the erosion of Z306 paint on leading edge specimens removed a minimum of 10 microns of that coating; and the erosion of A276 paint at up to 80 deg incidence angle resulted in near original condition solar absorptance readings.

Johnny L Golden↗