Search NASA⌕ Search

SEARCH · Search NASA

Results for “Auger”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

New methods for image collection and analysis in scanning Auger microscopy

While scanning Auger micrographs are used extensively for illustrating the stoichiometry of complex surfaces and for indicating areas of interest for fine point Auger spectroscopy, there are many problems in the quantification and analysis of Auger images. These problems include multiple contrast mechanisms and the lack of meaningful relationships with other Auger data. Collection of multielemental Auger images allows some new approaches to image analysis and presentation. Information about the distribution and quantity of elemental combinations at a surface are retrievable, and particular combinations of elements can be imaged, such as alloy phases. Results from the precipitate hardened alloy Al-2124 illustrate multispectral Auger imaging.

Browning, R.↗
NASA NTRS1986

Binary collision model for neon Auger spectra from neon ion bombardment of the aluminum surface

A model is developed to account for the angle-resolved Auger spectra from neon ion bombardment of the aluminum surface recently obtained by Pepper and Aron. The neon is assumed to be excited in a single asymmetric neon-aluminum-collision and scattered back into the vacuum where it emits an Auger electron. The velocity of the Auger electron acquires a Doppler shift by virtue of the emission from a moving source. The dependence of the Auger peak shape and energy on the incident ion energy, angle of incidence and on the angle of Auger electron emission with respect to the surface is presented. Satisfactory agreement with the angle resolved experimental observations is obtained. The dependence of the angle-integrated Auger yield on the incident ion energy and angle of incidence is also obtained and shown to be in satisfactory agreement with available experimental evidence.

Pepper, S. V.↗
NASA NTRS1988

Design of a rotary stepped auger for a lunar environment

A lunar outpost will have need for deep drilling operations for both explorative and practical purposes. As in any drilling operation, the cuttings must be cleared from the hole. The hard vacuum of the lunar environment renders conventional flushing methods of cutting removal unfeasible, and requires a new system of removal. A rotary stepped auger (RSA) is a simple mechanical method of removing dry cuttings from a deep hole, and is ideally suited to the lunar environment. The RSA consists of a helical auger with stepped ramps which allow cuttings to slide up the helix, but will prevent them from sliding back down. The auger is driven in a pulsed manner by applying a periodic function of acceleration to the auger shaft. These pulses will compel the cuttings to slide up the auger's helix while the stepped ramps prevent the cuttings from backsliding while the auger accelerates. A mathematical model of the RSA was developed and experimentally evaluated. The math model produced a good baseline design, but the experimental model required some tuning to account for the approximations made in the math model. This design is suited for lunar drilling because it is mechanically simple, integral to the drill string, requires no fluids, is suited to the dry soil, and has relatively low weight and power requirements.

Dardet, Eduardo↗
NASA NTRS1991

Auger electron intensity variations in oxygen-charged silver

Auger intensity variations over an oxygen-charged polycrystalline silver surface have been observed by studies of Auger images and line scans of selected adjacent grains which were determined to be the (421) and (221) orientations. The observed contrast (M4.5VV transition) between the grains is produced by the variation in the detected Auger electrons caused by the different directions (interatomic direction) of forward focusing in each grain. The contrast produced by the Ag Auger electrons was found to be strongly dependent on the surface order of the grains, but that of the O Auger electrons was not, presumably because the atoms were randomly distributed throughout the Ag surface or subsurface. The contrast observed between the grains at the lower Auger energies (N1VV and N1N2.3V transitions) appeared to be produced by constructive interference from multiple scattering. The N1N2.3V electrons at 29 eV, for example, gave higher contrast than that of the N1VV transition at 78 eV.

Lee, W. S.↗
NASA NTRS1974

Auger analysis of films formed on metals in sliding contact with halogenated polymers

The use of Auger electron spectroscopy (AES) to search for transferred polymer must contend with the fact that there has been no published work on Auger analysis of polymers. Since this is a new area for AES, the Auger spectra of polymers and of halogenated polymers in particular is discussed. It is shown that the Auger spectra of halogenated polymers have certain characteristics that permit an assessment of whether a polymeric transfer film has been established by sliding contact. The discussion is general and the concepts should be useful in considering the Auger analysis of any polymer. The polymers chosen for this study are the halogenated polymers polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC), and polychlorotrifluorethylene (PCTFE).

Pepper, S. V.↗
NASA NTRS1983

Interatomic Auger transitions in maximal valent V and Cr compounds

The sensitivity of the intensities of the L(3)M(23)M(45) and L(3)M(45)M(45) Auger transitions toward the 3d character in the valence band has been demonstrated by using argon ion bombardment as a means of in situ reduction for the valence state of V and Cr in their maximal valent compounds. The selected V(5+) and Cr(6+) compounds were V2O5, NH4VO3, K2Cr2O7, K2CrO4, and CrO3. Auger and X-ray photoelectron spectra of fresh samples were obtained, and the samples were then subjected to ion bombardment of various durations. The subsequent spectra were recorded to monitor possible alterations due to the reduction of the cation valence state. The interatomic to intraatomic transitions of the Auger spectra transitions of the Auger spectra were observed dynamically and in situ. In particular, the intensity of the cation L(3)M(23)N(45) transitions was observed to increase dramatically with ion bombardment. The correlation between the interatomic Auger transition and covalency as well as the movements of the 3d electrons are discussed.

Yin, L. I.↗
NASA NTRS1990

Positron annihilation induced Auger electron spectroscopy

Recently, Weiss et al. have demonstrated that it is possible to excite Auger transitions by annihilating core electrons using a low energy (less than 30eV) beam of positrons. This mechanism makes possible a new electron spectroscopy, Positron annihilation induced Auger Electron Spectroscopy (PAES). The probability of exciting an Auger transition is proportional to the overlap of the positron wavefunction with atomic core levels. Since the Auger electron energy provides a signature of the atomic species making the transition, PAES makes it possible to determine the overlap of the positron wavefunction with a particular element. PAES may therefore provide a means of detecting positron-atom complexes. Measurements of PAES intensities from clean and adsorbate covered Cu surfaces are presented which indicate that approx. 5 percent of positrons injected into CU at 25eV produce core annihilations that result in Auger transitions.

Weiss, Alex↗
NASA NTRS1987

Proof of principal for staircase auger chip removal theory

A proof of principal design of the staircase auger theory is provided for lunar drilling. The drill is designed to drill holes 30 meters deep and 0.1 meters in diameter. The action of the auger is 0.01 meter strokes at a varying number of strokes per second. A detailed analysis of the interaction of the auger and particle was done to optimize the parameters of the auger. This optimum design will allow for proper heat removal and reasonable drilling time. The drill bit is designed to scoop the particles into the auger while efficiently cutting through the moon's surface.

Barron, Jeffrey B.↗
NASA NTRSDate not supplied

Lunar Water Extraction Via Lunar Auger Dryer ISRU (LADI)

In 2009, the Lunar Reconnaissance Orbiter (LRO) and Lunar Crater Observation and Sensing Satellite (LCROSS) provided definitive proof of water in the Lunar’s southern permanently shadowed region (PSR)1. Both the 2020 NASA Technology Taxonomy2 and the Lunar Surface Innovation Initiative (LSII) team identified capability gaps in icy regolith transfer and reactor processing in Permanently Shadowed Region (PSR) environmental conditions. A water processing plant operating inside the PSR can continuously process water (and volatiles) for both breathable air and propellant. NASA’s Johnson Space Center (JSC) fabricated a unique breadboard test stand for validating the feasibility of this concept,developed a lunar auger dryer sizing tool, and identified the physical flow and thermal models required to design an Engineering Development Unit (EDU) for environmental testing. Over the two years this project was active, models were developed including: a) a sizing tool that scales the auger parameters based on production targets, b) accurate thermal models in both lab and lunar conditions, c) a Discreet Element Model (DEM) for observing particle effects in low-g, and d) incorporated these subsystem models into a MATLAB parametric Modular Open System Approach (MOSA) system model. These models were validated by testing the auger in both a mechanical and thermal system configuration. The results of this testing increased the Technology Readiness Level (TRL) of the Lunar Auger Dryer ISRU (LADI) system to TRL 4.

Lunar↗
NASA NTRS1972

Use of LEED, Auger emission spectroscopy and field ion microscopy in microstructural studies

Surface research tools such as LEED, Auger emission spectroscopy analysis, and field ion microscopy are discussed. Examples of their use in studying adhesion, friction, wear, and lubrication presented. These tools have provided considerable insight into the basic nature of solid surface interactions. The transfer of metals from one surface to another at the atomic level has been observed and studied with each of these devices. The field ion microscope has been used to study polymer-metal interactions and Auger analysis to study the mechanism of polymer adhesion to metals. LEED and Auger analysis have identified surface segregation of alloying elements and indicated the influence of these elements in metallic adhesion. LEED and Auger analysis have assisted in adsorption studies in determining the structural arrangement and quantity of adsorbed species present in making an understanding of the influence of these species on adhesion possible. These devices are assisting in the furtherance of understanding of the fundamental mechanism involved in the adhesion, friction, wear, and lubrication processes.

Ferrante, J.↗
NASA NTRS1976

Study of Al with a combined Auger electron spectrometer-ellipsometer system

Auger electron spectroscopy and ellipsometry were applied in order to measure the optical constants and study the surface chemistry of vapor-deposited Al films and high-purity bulk Al surfaces in situ under vacuum. The optical constants measured were compared with the extinction coefficient computed by the free-electron theory. The contamination of the clean Al surface was in the form of a metal oxide film. Auger electron spectroscopic measurements were used to establish the relationship between the Auger peaks of O (513 eV) and aluminum oxide (53 eV) and changes in the measured optical phase and film thickness. The free path length of the Al Auger electrons (67 eV) in the oxide film was determined, and it was shown that the amplitude of these peaks is a linear function of film thickness down to 0.6 A.

Allen, T. H.↗
NASA NTRS1976

Production of Mg and Al Auger electrons by noble gas ion bombardment of Mg and Al surfaces

Relative production efficiencies of Mg and Al Auger electrons by He, Ne, Ar, Kr, and Xe ion bombardment are reported as a function of ion energy for energies not exceeding 3 keV. The experimental apparatus employed consisted of a LEED-Auger system equipped with an ion gun and a four-grid retarding-potential analyzer. It is found that: (1) the shape of the ion-excited Auger signal was independent of the rare gas and quite symmetric; (2) the Al signal was about an order of magnitude smaller than the Mg signal for a given bombarding species and ion-gun voltage; (3) no signal was observed for He(+) bombardment under any of the experimental conditions; (4) signal strengths were independent of temperature and ion dose; (5) the Auger production efficiencies differed by no more than a factor of two among the different gases - except for He(+) - on a given metal; (6) all the signal strengths increased with increasing ion-gun voltage, with no maximum exhibited; and (7) the apparent threshold energy for the Al signal was higher than that for the Mg signal. The differences between the results for the two metals are attributed to the fact that the Al 2p orbital lies deeper in energy and closer to the nucleus than the corresponding Mg orbital.

Ferrante, J.↗
NASA NTRS1979

Auger electron emission due to incident particle in Ar(+), Ne(+) and Na(+) collisions with different solid targets

The L23 Auger spectra of Ar, Ne and Na from Ar(+)-Ti, Ne(+)-Mg, Ne-A1, Na(+)-Be, Na(+)-Mg and Na(+)-A1 collisions were obtained. For Ar, L23 MM Auger electrons are emitted from the fast moving incident projectiles and a Doppler broadened structure is observed. The Ne and Na Auger spectra are due to Auger transitions with single or double 2p vancancies in the initial state of the implanted Ne atoms or surface trapped Na atoms.

Benazeth, C.↗
NASA NTRS1979

L-shell Auger and Coster-Kronig spectra from relativistic theory

The intensities of L-shell Auger and Coster-Kronig transitions in heavy atoms have been calculated relativistically. A detailed comparison is made with measured Auger spectra of Pt and U. The pertinent transition energies were computed from relativistic wave functions with inclusion of the Breit interaction, self-energy, a vacuum-polarization correction, and complete atomic relaxation. Multiplet splitting is found to distribute Auger electrons from certain transitions among several lines. The analysis leads to reassignment of a number of lines in the measured spectra. Lines originally identified as L2-L3Ni in the U spectrum are shown to arise from M4,5 Auger transitions instead.

Chen, M. H.↗
NASA NTRS1985

Coal-Sizing Auger

Aft end of auger, like forward, face-piercing end, equipped with hard cutting bits such as diamonds. As auger breaks face, pulls broken coal lumps into jaws and forces them into hardened throat section. There, cutting bits chew up lumps: Clearance between throat and auger shaft sets maximum size for coal particles that pass through. Auger motion pushes coal particles into mixing chamber, where paddles combine them with water.

Lewis, E. V.↗
NASA NTRS1990

Hydrogen slush production with a large auger

The design and construction of a 178-mm-diameter auger-type hydrogen slush generator are described. A supercritical helium flow loop, which simulates the performance of a helium refrigerator, cools the generator. The coolant temperature varies down to 5 K and the flow varies about the 1.4 L/s (3 cfm) design point. The computer model of the auger-type generator shows that coolant temperature and auger speed have the greatest influence on slush production rate, although coolant flow rate and auger radial clearance are also important.

Daney, D. E.↗
NASA NTRS1997

Auger Spectroscopy of Hydrogenated Diamond Surfaces

An energy shift and a change of the line shape of the carbon core-valence-valence Auger spectra are observed for diamond surfaces after their exposure to an electron beam, or annealing at temperatures higher then 950 C. The effect is studied for both natural diamond crystals and chemical-vapor-deposited diamond films. A theoretical model is proposed for Auger spectra of hydrogenated diamond surfaces. The observed changes of the carbon Auger line shape are shown to be related to the redistribution of the valence-band local density of states caused by the hydrogen desorption from the surface. One-electron calculation of Auger spectra of diamond surfaces with various hydrogen coverages are presented. They are based on self-consistent wave functions and matrix elements calculated in the framework of the local-density approximation and the self-consistent linear muffin-tin orbital method with static core-hole effects taken into account. The major features of experimental spectra are explained.

Krainsky, I. L.↗
NASA NTRS2002

A Complete Set of Radiative and Auger Rates for K-vacancy States in Fe XVIII-Fe XXV

A complete set of level energies, wavelengths, A-values, and total and partial Auger rates have been computed for transitions involving the K-vacancy states within the n = 2 complex of Fe XVIII-Fe XXV. Three different standard numerical packages are used for this purpose, namely AUTOSTRUCTURE, the Breit-Pauli R-matrix suite (BPRM) and HFR, which allow reliable estimates of the physical effects involved and of the accuracy of the resulting data sets. It is found that the Breit interaction must be always taken into account as the contributions to the small A-values and partial Auger rates does not decrease with electron occupancy. Semi-empirical adjustments can also lead to large differences in both the radiative and Auger decay data of strongly mixed levels. Several experimental energy levels and wavelengths are questioned, and significant discrepancies are found with previously computed decay rates that are attributed to numerical problems. The statistical accuracy of the present level energies and wavelengths is ranked at plus or minus 3 eV and plus or minus 2 mAngstroms, respectively, whereas that for A-values and partial Auger rates greater than 10(exp 13) per second is estimated at better than 20%.

Palmeri, P.↗