Noble-metal dark-edge fermiology: Centrifugal barriers, core-hole memory, and the Zeeman Auger effect
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “Auger effect”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Search for the interatomic Auger effect in Nitrous Oxide
Not Available
74 ATOMIC AND MOLECULAR PHYSICS↗
Strain effects on Auger–Meitner recombination in silicon
We study the effects of compressive and tensile biaxial strain on direct and phonon-assisted Auger–Meitner recombination (AMR) in silicon using first-principles calculations. We find that the application of strain has a non-trivial effect on the AMR rate. For most AMR processes, the application of strain increases the AMR rate. However, the recombination rate for the AMR process involving two holes and one electron is suppressed by 38% under tensile strain. We further analyze the specific phonon contributions that mediate the phonon-assisted AMR mechanism, demonstrating the increased anisotropy under strain. In conclusion, our results indicate that the application of tensile strain increases the lifetime of minority electron carriers in p-type silicon and can be leveraged to improve the efficiency of silicon devices.
36 MATERIALS SCIENCE↗
Effect of Auger recombination on transient optical properties in XUV and soft X-ray irradiated silicon nitride
Spatially encoded measurements of transient optical transmissivity became a standard tool for temporal diagnostics of free-electron-laser (FEL) pulses, as well as for the arrival time measurements in X-ray pump and optical probe experiments. The modern experimental techniques can measure changes in optical coefficients with a temporal resolution better than 10 fs. This, in an ideal case, would imply a similar resolution for the temporal pulse properties and the arrival time jitter between the FEL and optical laser pulses. However, carrier transport within the material and out of its surface, as well as carrier recombination may, in addition, significantly decrease the number of carriers. This would strongly affect the transient optical properties, making the diagnostic measurement inaccurate. Below we analyze in detail the effects of those processes on the optical properties of XUV and soft X-ray irradiated Si 3 N 4 , on sub-picosecond timescales. Si 3 N 4 is a wide-gap insulating material widely used for FEL pulse diagnostics. Theoretical predictions are compared with the published results of two experiments at FERMI and LCLS facilities, and with our own recent measurement. The comparison indicates that three body Auger recombination strongly affects the optical response of Si 3 N 4 after its collisional ionization stops. By deconvolving the contribution of Auger recombination, in future applications one could regain a high temporal resolution for the reconstruction of the FEL pulse properties measured with a Si 3 N 4 -based diagnostics tool.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Kinetics of the luminescence decay of Fe{sup 2+} impurity centres in polycrystalline ZnSe upon excitation by an electron beam
The kinetics of the decay of the luminescence of Fe{sup 2+} ions is measured at nitrogen temperature in polycrystalline ZnSe excited by a short pulse of accelerated electrons. The time dependence of the luminescence intensity differs from the exponential one, observed upon excitation of luminescence by a short light pulse. The obtained nonexponential dependence is theoretically described. The explanation is based on the quenching effect of the excited state of the Fe{sup 2+} ion by free electrons of the volume charge of the current of accelerated electrons in the sample (Auger effect). It was shown that the relaxation of the volume charge after the electron-accelerating voltage is removed makes a significant contribution to the decay kinetics of the impurity luminescence. (paper)
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Molybdenum and silver photoemission survey spectra from hard x-rays
Electron emission from thick polished samples of polycrystalline molybdenum (Mo) and single crystalline $\langle$111$\rangle$ silver (Ag) was measured with hard x-ray photoemission spectroscopy. Six different excitation x-ray energies were used, nominally 8.0, 11.0, 13.0, 15.0, 18.0, and 21.5 keV. Survey spectra were recorded with each excitation to a kinetic energy of at most 15 keV, often capturing the entire emission range. The Mo 1s core peak was measured. Detailed LMM Auger spectra of Mo show marked increases in intensity and altered shape when x-ray energy exceeds the Mo 1s binding energy. The Mo and Ag L-shell photoelectron peaks are measured at four x-ray energies up to 18 keV showing the transition from 2p3/2 to 2s photoionization dominance.
47 OTHER INSTRUMENTATION↗
Partial densities of states from x-ray absorption and Auger electron spectroscopy: Use of core-hole memory
Ag L 3 edge x-ray absorption and L 3 −M 4,5 M 4,5 Auger electron spectra have been measured and simulated for a variety of x-ray electric-field polarization and Auger electron emission directions. The theory relies on density-functional theory, use of the Bethe–Salpeter equation, atomic multiplet theory, and a simplified model for the Auger line shape and its dependence on photon energy. We also demonstrate that partial densities of states for dT 2g , dE g , and sA g symmetry partial-wave channels at the Ag site in the solid can be deduced from the experimental measurements with only atomic theoretical input, i.e., with no solid-state theory other than assuming a Fermi edge.
36 MATERIALS SCIENCE↗
Carrier confinement and alloy disorder exacerbate Auger–Meitner recombination in AlGaN ultraviolet light-emitting diodes
The quantum efficiency of AlGaN ultraviolet light-emitting diodes declines (droops) at increasing operating powers due to Auger–Meitner recombination (AMR). Using first-principles density-functional theory, we show that indirect AMR mediated by electron–phonon coupling and alloy disorder can induce bulk C coefficients as large as ~10 –31 cm 6 /s. Furthermore, we find that the confinement of carriers by polarization fields within quantum wells severely relaxes crystal-momentum conservation, which exacerbates the rate of AMR over radiative recombination by an order of magnitude relative to the bulk. Furthermore, this results in a striking decrease in quantum efficiency at high power. Suppressing polarization fields and jointly increasing the well width would greatly mitigate AMR and efficiency droop.
36 MATERIALS SCIENCE↗
Biexciton and trion dynamics in InP/ZnSe/ZnS quantum dots
Transient absorption (TA) and time-resolved photoluminescence (PL) spectroscopies have been used to elucidate the hole tunneling and Auger dynamics in biexcitons and negative trions in high-quality InP/ZnSe/ZnS quantum dots (QDs). In a previous paper [Nguyen et al., J. Phys. Chem. C 125, 15405–15414 (2021)], we showed that under high-intensity photoexcitation, two types of biexcitons are formed: those having two conduction band electrons and two valence band holes (designated as an XX state) and those having two conduction band electrons, one valence band hole, and an additional trapped hole (designated as an XT state). In the present paper, we show that both types of biexcitons can undergo Auger processes, with those of the XT state being a factor of four to five slower than those of the XX state. In addition, the trapped holes can undergo tunneling into the valence band, converting an XT state to an XX state. The relative amplitudes of the fast (XX) and slow (XT) components are different in the TA and PL kinetics, and these differences can be quantitatively understood in terms of oscillator strengths and electron–hole overlap integrals of each state. XT to XX hole tunneling rates are obtained from the comparison of the XT state lifetimes with those of the negative trions. This comparison shows that the tunneling times decrease with decreasing core size and shell thickness. Furthermore, these times are about 2 ns for the thinnest shell red-emitting QDs and decrease to 330 ps for QDs that luminesce in the yellow.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
X-ray induced electron and ion fragmentation dynamics in IBr
Characterization of the inner-shell decay processes in molecules containing heavy elements is key to understanding x-ray damage of molecules and materials and for medical applications with Auger-electron-emitting radionuclides. The 1s hole states of heavy atoms can be produced by absorption of tunable x rays and the resulting vacancy decays characterized by recording emitted photons, electrons, and ions. The 1s hole states in heavy elements have large x-ray fluorescence yields that transfer the hole to intermediate electron shells that then decay by sequential Auger-electron transitions that increase the ion’s charge state until the final state is reached. In molecules, the charge is spread across the atomic sites, resulting in dissociation to energetic atomic ions. We have used x-ray/ion coincidence spectroscopy to measure charge states and energies of Iq+ and Brq′+ atomic ions following 1s ionization at the I and Br K-edges of IBr. We present the charge states and kinetic energies of the two correlated fragment ions associated with core-excited states produced during the various steps of the cascades. Here, to understand the dynamics leading to the ion data, we develop a computational model that combines Monte-Carlo/Molecular-Dynamics (MC/MD) simulations with a classical over-the-barrier model to track inner-shell cascades and redistribution of electrons in valence orbitals and nuclear motion of fragments.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Resonant Auger decay of dissociating CH 3 I near the I 4d threshold
Resonant Auger processes provide a unique perspective on electronic interactions and excited vibrational and electronic states of molecular ions. Here, new data are presented on the resonant Auger decay of excited CH 3 I in the region just below the I 4d -1 ionization threshold. The resonances include the Rydberg series converging to the five spin–orbit and ligand-field split CH 3 I (I 4d -1 ) thresholds, as well as resonances corresponding to excitation from the I 4d 5/2,3/2 orbitals into the σ* lowest unoccupied molecular orbital. This study focuses on participator decay that populates the lowest lying states of CH 3 I + , in particular, the X̃ 2 E 3/2 and 2 E 1/2 states, and on spectator decay that populates the lowest-lying (CH 3 I 2+ )σ* states of CH 3 I + . The CH 3 I (I 4d -1 )σ* resonances are broad, and dissociation to CH 3 + I competes with the autoionization of the core-excited states. Auger decay as the molecule dissociates produces a photoelectron spectrum with a long progression (up to v 3 + ~ 25) in the C–I stretching mode of the X̃ 2 E 3/2 and 2 E 1/2 states, providing insights into the shape of the dissociative core-excited surface. Further, the observed spectator decay processes indicate that CH 3 I + is formed on the repulsive wall of the lower-lying (CH 3 I 2+ )σ* potentials, and the photon-energy dependence of the processes provides insights into the relative slopes of the (4d -1 )σ* and (CH 3 I 2+ )σ* potential surfaces. Data are also presented for the spectator decay of higher lying CH 3 I (I 4d -1 )nl Rydberg resonances. Photoelectron angular distributions for the resonant Auger processes provide additional information that helps distinguish these processes from the direct ionization signal.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Impact of quantum well thickness on efficiency loss in InGaN/GaN LEDs: Challenges for thin-well designs
We investigate the impact of quantum well (QW) thickness on efficiency loss in c-plane InGaN/GaN LEDs using a small-signal electroluminescence technique. Multiple mechanisms related to efficiency loss are independently examined, including injection efficiency, carrier density vs current density relationship, phase space filling, quantum-confined Stark effect, and Coulomb enhancement. An optimal QW thickness of around 2.7 nm in these InGaN/GaN LEDs was determined for QWs having constant In composition. Despite improved control of deep-level defects and lower carrier density at a given current density, LEDs with thin QWs still suffer from an imbalance in enhancement effects on the radiative and intrinsic Auger–Meitner recombination coefficients. The imbalance in enhancement effects results in a decline in internal quantum efficiency and radiative efficiency with decreasing QW thickness at low current density in LEDs with QW thicknesses below 2.7 nm. Here, we also investigate how LED modulation bandwidth varies with QW thickness, identifying the key trends and their implications for device performance.
36 MATERIALS SCIENCE↗
Impact of the magnetic horizon on the interpretation of the Pierre Auger Observatory spectrum and composition data
The flux of ultra-high energy cosmic rays reaching Earth above the ankle energy (5 EeV) can be described as a mixture of nuclei injected by extragalactic sources with very hard spectra and a low rigidity cutoff.Extragalactic magnetic fields existing between the Earth and the closest sources can affect the observed CR spectrum by reducing the flux of low-rigidity particles reaching Earth. We perform a combined fit of the spectrum and distributions of depth of shower maximum measured with the Pierre Auger Observatory including the effect of this magnetic horizon in the propagation of UHECRs in the intergalactic space.We find that, within a specific range of the various experimental and phenomenological systematics, the magnetic horizon effect can be relevant for turbulent magnetic field strengths in the local neighbourhood in which the closest sources lieof order B$_{rms}$ ≃ (50–100) nG (20 Mpc/d$_{s}$)( 100 kpc/L$_{coh}$)$^{1/2}$, with d$_{s}$ the typical intersource separation and L$_{coh}$ the magnetic field coherence length. When this is the case,the inferred slope of the source spectrum becomes softer and can be closer to the expectations of diffusive shock acceleration, i.e., ∝ E$^{-2}$.An additional cosmic-ray population with higher source density and softer spectra, presumably also extragalactic and dominating the cosmic-ray flux at EeV energies, is also required to reproduce the overall spectrum and composition results for all energies down to 0.6 EeV.
79 ASTRONOMY AND ASTROPHYSICS↗
Electron collisional excitation cross-section measurements and modeling for select Ni-like to Ge-like gold transitions
We have experimentally determined the electron collisional excitation cross-sections for several 3d→4f and 3d→5f excitations in Ni- to Ge-like Au at energies of ~ 0.4, 1, 2, and 3 keV above threshold energy, E T , for the 3d→4f excitations ( E T ~ 2.5 keV) and ~ 0.2, 1, and 2 keV above threshold energy for the 3d→5f excitations ( E T ~ 3.3 keV). The cross-section measurements are possible by using the GSFC micro-calorimeter to record emission spectra from beam plasmas created in the Livermore EBIT-I electron beam ion trap. The cross-sections are experimentally determined from the ratio of the measured intensities of the collisionally excited lines to the intensities of the radiative recombination lines in monoenergetic electron distribution EBIT-I plasmas. The effects of polarization and Auger processes in the beam plasmas are accounted for in the cross-section determination. Experimentally determined cross-sections are compared with those from HULLAC, DWS, and FAC calculations. Finally, the measurements exhibit significant differences with the calculations of these excitation cross-sections.
74 ATOMIC AND MOLECULAR PHYSICS↗
Efficiency droop contributors in InGaN green light emitting diodes
Here, efficiency droop contributors (i.e., inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction) in InGaN green light emitting diodes (LEDs) are decoupled and quantified. First, a modified ABC model is developed, and external quantum efficiency measurements are taken under constant and pulsed currents ( EQE Constant and EQE Pulsed , respectively). The LED internal quantum efficiency with and without thermal effects ( IQE$^{ABC}_{Constant}$ and IQE$^{ABC}_{Pulsed}$, respectively) is extracted using the modified model. Then, using Raman spectroscopy, the LED junction temperature is extracted. Finally, using the optical-electrical model (OEM), the polarization- and temperature-independent LED internal quantum efficiency ( IQE OEM ) is calculated from the modified ABC model and the extracted junction temperature. By comparing external ( EQE Constant ) and the three internal quantum efficiencies ( IQE$^{ABC}_{Constant}$, IQE$^{ABC}_{Pulsed}$, and IQE OEM ), the impacts of inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction on the efficiency droop are decoupled and quantified. It is found that inherent Auger–Meitner recombination-induced droop is approximately 49% of the total efficiency droop in commercial green LEDs, while polarization-induced effects contribute about 35%, and thermal droop accounts for nearly 16%. Lastly, these findings suggest, to quash the green gap, it is critical to search for materials and device designs with low inherent Auger–Meitner coefficients and polarization fields, respectively.
42 ENGINEERING↗
Search for magnetically-induced signatures in the arrival directions of ultra-high-energy cosmic rays measured at the Pierre Auger Observatory
We search for signals of magnetically-induced effects in the arrival directions of ultra-high-energy cosmic rays detected at the Pierre Auger Observatory. We apply two different methods. One is a search for sets of events that show a correlation between their arrival direction and the inverse of their energy, which would be expected if they come from the same point-like source, they have the same electric charge and their deflection is relatively small and coherent. We refer to these sets of events as “multiplets”. The second method, called “thrust”, is a principal axis analysis aimed to detect the elongated patterns in a region of interest. We study the sensitivity of both methods using a benchmark simulation and we apply them to data in two different searches. The first search is done assuming as source candidates a list of nearby active galactic nuclei and starburst galaxies. The second is an all-sky blind search. We report the results and we find no statistically significant features. We discuss the compatibility of these results with the indications on the mass composition inferred from data of the Pierre Auger Observatory.
79 ASTRONOMY AND ASTROPHYSICS↗
Electron beam analysis induces Cl vacancy defects in a NaCl thin film
This work reports on the electron-induced modification of NaCl thin film grown on Ag(110). We show using low energy electron diffraction that electron beam bombardment leads to desorption and formation of Cl vacancy defects on NaCl surface. The topographic structure of these defects is studied using scanning tunneling microscopy (STM) showing the Cl defects as depressions on the NaCl surface. Most of the observed defects are mono-atomic vacancies and are located on flat NaCl terraces. Auger electron spectroscopy confirms the effect of electron exposure on NaCl thin films showing Cl atoms desorption from the surface. Using density functional theory taken into account the van der Waals dispersion interactions, we confirm the observed experimental STM measurements with STM simulation. Furthermore, comparing the adsorption of defect free NaCl and defective NaCl monolayer on Ag(110) surfaces, we found an increase of the adhesion energy and the charge transfer between the NaCl film and the substrate due to the Cl vacancy. In details, the adhesion energy increases between the NaCl film and the metallic Ag substrate from 30.4 meV Å –2 for the NaCl film without Cl vacancy and from 39.5 meV Å –2 for NaCl film with a single Cl vacancy. The charge transfer from the NaCl film to the Ag substrate is enhanced when the vacancy is created, from 0.63e – to 1.25e – .
Materials Science↗
Manifestation of postcollision interaction in Krypton LMN Auger spectra following K-shell photoionization
In this work, we report on an experimental and theoretical study of post-collision interaction (PCI) effects on L 2 -M 4,5 N 2,3 Auger electrons measured above the Kr K-edge in which L 2 vacancies are primarily generated by KL 2 x-ray emission. Such cascade processes, in which a deep inner-shell vacancy decays first by x-ray emission followed by Auger electron emission, is a strong decay mode in heavy atoms. The L 2 -M 4,5 N 2,3 Auger electron peak is observed to become increasingly asymmetric with a shifting peak maximum as the absorbed x-ray energy approaches the K-shell ionization threshold. This is attributed to PCI energy exchanges of the Auger electron with the 1s photoelectron. To model the PCI effects, we have applied a semiclassical approach modified to account for the combined lifetimes of the K and L 2 hole states. In addition, our analysis treats several closely spaced Auger transitions with final ionic states having different terms and angular momenta.
74 ATOMIC AND MOLECULAR PHYSICS↗