Search NASA⌕ Search

SEARCH · Search NASA

Results for “Autonomous System Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Autonomous power system: Integrated scheduling

The Autonomous Power System (APS) project at NASA Lewis Research Center is designed to demonstrate the abilities of integrated intelligent diagnosis, control and scheduling techniques to space power distribution hardware. The project consists of three elements: the Autonomous Power Expert System (APEX) for fault diagnosis, isolation, and recovery (FDIR), the Autonomous Intelligent Power Scheduler (AIPS) to determine system configuration, and power hardware (Brassboard) to simulate a space-based power system. Faults can be introduced into the Brassboard and in turn, be diagnosed and corrected by APEX and AIPS. The Autonomous Intelligent Power Scheduler controls the execution of loads attached to the Brassboard. Each load must be executed in a manner that efficiently utilizes available power and satisfies all load, resource, and temporal constraints. In the case of a fault situation on the Brassboard, AIPS dynamically modifies the existing schedule in order to resume efficient operation conditions. A database is kept of the power demand, temporal modifiers, priority of each load, and the power level of each source. AIPS uses a set of heuristic rules to assign start times and resources to each load based on load and resource constraints. A simple improvement engine based upon these heuristics is also available to improve the schedule efficiency. This paper describes the operation of the Autonomous Intelligent Power Scheduler as a single entity, as well as its integration with APEX and the Brassboard. Future plans are discussed for the growth of the Autonomous Intelligent Power Scheduler.

Ringer, Mark J.↗
NASA NTRSDate not supplied

ISAAC: An Integrated System for Autonomous and Adaptive Caretaking

The Integrated System for Autonomous and Adaptive Caretaking (ISAAC) project is developing technology for autonomous caretaking of spacecraft, primarily during uncrewed mission phases. ISAAC aims to integrate autonomous intra-vehicular robots (IVR) with spacecraft infrastructure (power, life support, etc.) and ground control. It focuses on capabilities required for NASA’s Gateway cis-lunar outpost that also apply to human missions to Mars and beyond. Its development strategy is to test using existing IVR on the ISS (the Astrobee free-flyer and Robonaut dextrous manipulator) as an analog for future IVR on Gateway.

Trey Smith↗
NASA NTRS2006

Integrated System for Autonomous Science

The New Millennium Program Space Technology 6 Project Autonomous Sciencecraft software implements an integrated system for autonomous planning and execution of scientific, engineering, and spacecraft-coordination actions. A prior version of this software was reported in "The TechSat 21 Autonomous Sciencecraft Experiment" (NPO-30784), NASA Tech Briefs, Vol. 28, No. 3 (March 2004), page 33. This software is now in continuous use aboard the Earth Orbiter 1 (EO-1) spacecraft mission and is being adapted for use in the Mars Odyssey and Mars Exploration Rovers missions. This software enables EO-1 to detect and respond to such events of scientific interest as volcanic activity, flooding, and freezing and thawing of water. It uses classification algorithms to analyze imagery onboard to detect changes, including events of scientific interest. Detection of such events triggers acquisition of follow-up imagery. The mission-planning component of the software develops a response plan that accounts for visibility of targets and operational constraints. The plan is then executed under control by a task-execution component of the software that is capable of responding to anomalies.

Chien, Steve↗
NASA NTRS2021

Integrated System for Autonomous and Adaptive Caretaking (ISAAC) Simulated Cargo Logistics Demo Video

This video shows a simulation of autonomous cargo logistics using ISAAC (Integrated System for Autonomous and Adaptive Caretaking). The video shows autonomous planning and execution of a cargo scenario in which the R2 robot moves a cargo bag from a stowed location to a transfer location in the US Lab on the International Space Station. The Astrobee robot then moves the bag from the transfer location to a new temporary stowage location in the Japanese Experiment Module (JEM).

ISAAC↗
NASA NTRS1984

Autonomous Integrated Receive System (AIRS) requirements definition. Volume 3: Performance and simulation

The autonomous and integrated aspects of the operation of the AIRS (Autonomous Integrated Receive System) are discussed from a system operation point of view. The advantages of AIRS compared to the existing SSA receive chain equipment are highlighted. The three modes of AIRS operation are addressed in detail. The configurations of the AIRS are defined as a function of the operating modes and the user signal characteristics. Each AIRS configuration selection is made up of three components: the hardware, the software algorithms and the parameters used by these algorithms. A comparison between AIRS and the wide dynamics demodulation (WDD) is provided. The organization of the AIRS analytical/simulation software is described. The modeling and analysis is for simulating the performance of the PN subsystem is documented. The frequence acquisition technique using a frequency-locked loop is also documented. Doppler compensation implementation is described. The technological aspects of employing CCD's for PN acquisition are addressed.

Chie, C. M.↗
NASA NTRS2016

Integrated System for Health Management and Autonomous Control (ISHM-AC): Development and Application

Autonomous control systems represent a technological barrier from manual and automated operated control systems in an industry wide application. An increase in energy-efficient storage, transfer and use of cryogens and cryogenic propellants on Earth and in space has been observed in space related industries between NASA, government and commercial programs. An increase in efficiency of cryogenic systems demands an increase in the capabilities of the control and monitoring system that manages them. As new technologies are developed for cryogenic systems, complexity and capability increases. The increase in complexities are a natural drive to develop better and more capable health monitoring and control system management. Current research and development efforts lead the Cryogenics Test Laboratory at the Kennedy Space Center to improve its automated control and health monitoring system from a Programmable Logic Control (PLC) based-only system to a fully Integrated System for Health Management (ISHM) - Autonomous Control (AC) capable of performing autonomous operations on a cryogenic propellant transfer system. This ISHM-AC system has been developed and tested by controlling a complete simulated propellant transfer operation. The capabilities and test results of this fully integrated autonomous system for cryogenics propellant transfer operation will be presented in this paper.

Toro, Jaime A.↗
NASA NTRS2016

Integrated System for Health Management and Autonomous Control (ISHM-AC) for Cryogenic Operations on the Simulated Propellant Loading System

Autonomous control systems represent a technological barrier from manual and automated operated control systems in an industry wide application. An increase in energy-efficient storage, transfer and use of cryogens and cryogenic propellants on Earth and in space has been observed in space related industries between NASA, government and commercial programs. An increase in efficiency of cryogenic systems demands an increase in the capabilities of the control and monitoring system that manages them. As new technologies are developed for cryogenic systems, complexity and capability increases. The increase in complexities are a natural drive to develop better and more capable health monitoring and control system management. Current research and development efforts lead the Cryogenics Test Laboratory at the Kennedy Space Center to improve its automated control and health monitoring system from a Programmable Logic Control (PLC) based-only system to a fully Integrated System for Health Management (ISHM) - Autonomous Control (AC) capable of performing autonomous operations on a cryogenic propellant transfer system. This ISHM-AC system has been developed and tested by controlling a complete simulated propellant transfer operation. The capabilities and test results of this fully integrated autonomous system for cryogenics propellant transfer operation will be presented in this paper.

Toro Medina, Jaime A.↗
NASA NTRS2019

Integrated System for Autonomous and Adaptive Caretaking (ISAAC)

This presentation is an overview of the Integrated System for Autonomous and Adaptive Caretaking (ISAAC) project, funded by the STMD Game Changing Development program to develop autonomous caretaking capabilities for future human exploration spacecraft, especially during uncrewed phases.

Deans, Matt↗
NASA NTRS1984

Autonomous Integrated Receive System (AIRS) requirements definition. Volume 2: Design and development

Functional requirements and specifications are defined for an autonomous integrated receive system (AIRS) to be used as an improvement in the current tracking and data relay satellite system (TDRSS), and as a receiving system in the future tracking and data acquisition system (TDAS). The AIRS provides improved acquisition, tracking, bit error rate (BER), RFI mitigation techniques, and data operations performance compared to the current TDRSS ground segment receive system. A computer model of the AIRS is used to provide simulation results predicting the performance of AIRS. Cost and technology assessments are included.

Chie, C. M.↗
NASA NTRS1984

Autonomous Integrated Receive System (AIRS) requirements definition. Volume 1: Executive summary

Distributed processing in the design and operation of the augmented TDRSS and the succeeding TDAS in the 1990's is discussed with the emphasis on the development of the autonomous integrated receive system (AIRS) for the operation of the S-band single access (SSA) return link in the White Sands ground terminal. This receive system has the capability of self configuration, real-time operation, and self diagnostic. The tasks of Doppler correction, demodulation, detection, and decoding are performed in an integrated manner where useful information are shared and used by ALL portions of AIRS performing these tasks. Operating modes, maintenance, system architecture, and performance characteristics are described.

Chie, C. M.↗
NASA NTRS2017

An Integrated System for Autonomous Search and Track with a Small Unmanned Aerial Vehicle

This article presents a framework for searching, detecting, and tracking an object of interest with a small unmanned aerial vehicle (sUAV). The vehicle is given an area to search for an object of interest. Once the object is detected, the sUAV follows the target while maintaining a fixed distance and centered on its image plane. This paper describes an architecture for integrating autonomy capabilities for search and track for sUAVs. The system has been implemented in the Robot Operating System (ROS) framework using the Parrot ARDrone platform. In this paper we present our technical approach, the system architecture and demonstrate the principles of the approach in a simulation environment and indoor flight tests.

Unmanned Aerial Vehicle↗
NASA NTRSDate not supplied

Integrated System for Autonomous and Adaptive Caretaking (ISAAC): Phase 1 Low-Fidelity Demo

This presentation describes the ISAAC phase 1 low-fidelity demonstration results. The demonstration satisfied the milestone from the Gateway-ISAAC Memorandum of Understanding to "Demonstrate spatial and logical data registration between robotics and spacecraft". It integrated many new ISAAC components, including a spatially linked model, Astrobee multi-sensor mapping, and an integrated data interface. It advanced ISAAC key performance parameters related to mapping, in a lab setting. Areas for phase 1 forward work include: improve maturity toward the high-fidelity demo on the ISS; demonstrate mapping with more sensor modalities; expand initial anomaly detection implementation into a flexible framework with multiple detection algorithms for different tasks; begin open source software release process for releasable ISAAC components.

robotics↗