Search NASA⌕ Search

SEARCH · Search NASA

Results for “B←N bonds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

B—N–Bond–Embedded Triplet Terpolymers with Small Singlet–Triplet Energy Gaps for Suppressing Non–Radiative Recombination and Improving Blend Morphology in Organic Solar Cells

Suppressing the photon energy loss (E loss ), especially the non-radiative loss, is of importance to further improve the device performance of organic solar cells (OSCs). However, typical π-conjugated semiconductors possess a large singlet–triplet energy gap (ΔE ST ), leading to a lower triplet state than charge transfer state and contributing to a non-radiative loss channel of the photocurrent by the triplet state. Herein, a series of triplet polymer donors are developed by introducing a BNIDT block into the PM6 polymer backbone. Further, the high electron affinity of BNIDT and the opposite resonance effect of the B—N bond in BNIDT results in a lowered highest occupied molecular orbital (HOMO) and a largely reduced ΔE ST . Moreover, the morphology of the active blends is also optimized by fine-tuning the BNIDT content. Therefore, non-radiative recombination via the terminal triplet loss channels and morphology traps is effectively suppressed. The PNB-3 (with 3% BNIDT):L8-BO device exhibits both small ΔE ST and optimized morphology, favoring more efficient charge transfer and transport. Finally, the simultaneously enhanced V oc of 0.907 V, J sc of 26.59 mA cm –2 , and FF of 78.86% contribute to a champion PCE of 19.02%. Therefore, introducing B—N bonds into benchmark polymers is a possible avenue toward higher-performance of OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Extreme Thermal Stabilization of Carborane–Cyanate Composites via B–N Dative-Bonded Boroxine Barriers

Enhancing the thermal stability of cyanate ester (CE) resins is crucial for high-temperature aerospace applications. This study elucidates the degradation mechanisms of CE composites reinforced with carborane additives, focusing on the formation of boron–nitrogen (B–N) dative bonds and their role in improving thermal resistance. Using thermogravimetric analysis, we examined char formation and evolved gases at multiple degradation stages. Reaction sequences and char products were characterized via Fourier transform infrared spectroscopy (FTIR), solid-state 13C and 11B NMR, and evolved gas analysis using mass spectrometry and FTIR. The solid-state 11B NMR was instrumental in detecting various boron oxidation states and the formation of B–N dative bonds during decomposition. These bonds facilitate cross-linking in the char phase, enhancing material integrity at elevated temperatures. However, in inert environments, the volatility of boron additives like carborane limits their effectiveness. These findings advance the understanding of CE composite degradation mechanisms and offer critical insights for developing high-temperature-resistant materials for aerospace applications.

Fourier transform infrared spectroscopy↗
DOE OSTI2022

Evaluating Use of Boron- and Hafnium-Modified Polysilazanes for Ceramic Matrix Minicomposites

In this study, the potential of polymer-derived Ceramic Matrix Composites (CMCs) is demonstrated by addition of thin ceramic coatings on Carbon Fiber (CF) bundles. Boron- and hafnium- modified polysilazane liquid precursors were synthesized and used to infiltrate the fiber bundles of CF to fabricate lab-scale Si(B)CN/CF and Si(Hf)CN/CF CMC mini-composites, respectively. The precursor-to-ceramic conversion process was achieved at 800°C with crosslinked precursor to ceramic yield of approx. 90% in Ar environment. The Si(B)CN/CF contained Si-N and B-N bonds, while Si-N and Hf-O-Si bonds were observed for Si(Hf)CN/CF sample with uniform and dense surfaces. Room-temperature tensile tests showed that the Si(Hf)CN/CF sample could reach a tensile strength of ~790 MPa and elastic modulus of 66.88 GPa among the composites. Oxidation study of the Si(Hf)CN/CF mini-composites showed higher stability compared to SiCN/CF and Si(B)CN/CF mini-composites up to 1500°C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2014

Chemical Sharpening, Shortening, and Unzipping of Boron Nitride Nanotubes

Boron nitride nanotubes (BNNTs), the one-dimensional member of the boron nitride nanostructure family, are generally accepted to be highly inert to oxidative treatments and can only be covalently modifi ed by highly reactive species. Conversely, it is discovered that the BNNTs can be chemically dispersed and their morphology modifi ed by a relatively mild method: simply sonicating the nanotubes in aqueous ammonia solution. The dispersed nanotubes are significantly corroded, with end-caps removed, tips sharpened, and walls thinned. The sonication treatment in aqueous ammonia solution also removes amorphous BN impurities and shortened BNNTs, resembling various oxidative treatments of carbon nanotubes. Importantly, the majority of BNNTs are at least partially longitudinally cut, or "unzipped". Entangled and freestanding BN nanoribbons (BNNRs), resulting from the unzipping, are found to be approximately 5-20 nm in width and up to a few hundred nanometers in length. This is the fi rst chemical method to obtain BNNRs from BNNT unzipping. This method is not derived from known carbon nanotube unzipping strategies, but is unique to BNNTs because the use of aqueous ammonia solutions specifi cally targets the B-N bond network. This study may pave the way for convenient processing of BNNTs, previously thought to be highly inert, toward controlling their dispersion, purity, lengths, and electronic properties.

Liao, Yunlong↗
DOE OSTI2023

Saddle-Shaped Third Component with Out-of-Plane Electrostatic Dipole for Realizing High-Performance Photovoltaic Donor Terpolymers

Terpolymer fabrication is an effective methodology for molecular engineering and generating high-performance organic photovoltaic materials to construct highly efficient polymer solar cells. Modification of the polymer PM6 by incorporating a third component resulting in the formation of a ternary copolymer is reported to outperform PM6 in achieving enhanced device performances. However, one of the major challenges in constructing high-performance terpolymers is to counter the molecular disorder caused by the backbone entropy induced by the third moiety. Here, in this work, double B←N bridged bipyridine (BNBP) is used as the third component, which possesses a strong out-of-plane electrostatic dipole owing to the saddle-shaped B←N fused ring structure. The out-of-plane dipole moment introduced in the modified PM6 terpolymer can be used as a means for tuning and optimizing the nanostructures of the blended films. The prepared PM6-BNBP-4 blend polymer with 4% of the benzodithiophene dione monomers replaced by BNBP results in excellent power conversion efficiency of 19.13%. This work demonstrates that the out-of-plane electrostatic dipole moment in saddle-shaped molecules is valuable for achieving high-performance organic photovoltaic donor materials.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Compilation of a Global Emission Inventory from 1980 to 2000 for Global Model Simulations of the Long-term Trend of Tropospheric Aerosols

The approach to create a comprehensive emission inventory for the time period 1980 to 2000 is described in this paper. We have recently compiled an emission database, which we will use for a 21 year simulation of tropospheric aerosols with the GOCART model. Particular attention was paid to the time-dependent SO2, black carbon and organic carbon aerosol emissions. For the emission of SO2 from sporadically erupting volcanoes, we assembled emission data from the Global Volcanism Program of the Smithsonian Institution, using the VEI to derive the volcanic cloud height and the SO2 amount, and amended this dataset by the SO2 emission data from the TOMS instrument when available. 3-dimensional aircraft emission data was obtained for a number of years from the AEAP project, converted from burned fuel to SO2 and interpolated to each year, taking the sparsity of the flight patterns into account. Other anthopogenic SO2 emissions are based on gridded emissions from the EDGAR 2000 database (excluding sources from aircraft, biomass burning and international ship traffic), which were scaled to individual years with country/regional based emission inventories. Gridded SO2 emissions from international ship traffic for 2000 and the scaling factors for other years are from [Eyring et al., 2005]. We used gridded anthropogenic black and organic carbon emissions for 1996 [Bond et al., 2005], again excluding aircraft, biomass burning and ship sources. These emissions were scaled with regional based emission inventories from 1980 to 2000 to derive gridded emissions for each year. The biomass burning emissions are based on a climatology, which is scaled with regional scaling factors derived from the TOMS aerosol index and the AVHRR/ATSR fire counts to each year [Duncan et al., 2003]. Details on the integration of the information from the various sources will be provided and the distribution patterns and total emissions in the final product will be discussed.

Diehl, T. L.↗
NASA NTRS1996

Preceramic Polymers for Use as Fiber Coatings

Polymeric precursors to Si-C-O, SI-B-N and Si-C were evaluated for use as ceramic interfaces in ceramic matrix composites. Use of the preceramic polymers allows for easy dip coating of fibers from dilute solutions of a polymer, which are then pyrolyzed to obtain the ceramic. SCS-0 fibers (Textron Specialty Materials, Lowell, MA) were coated with polymers from three systems: polysilsesquioxanes, polyborosilazanes and polycarbosilanes. The polysilsesquioxane systems were shown to produce either silicon oxycarbide or silicon oxynitride, depending on the pyrolysis conditions, and demonstrated some promise in an RBSN (reaction-bonded silicon nitride) matrix model system. Polyborosilazanes were shown, in studies of bulk polymers, to give rise to oxidation resistant Si-B-N ceramics which remain amorphous to temperatures of 1600 C, and should therefore provide a low modulus interface. Polycarbosilanes produce amorphous carbon-rich Si-C materials which have demonstrated oxidation resistance.

Heimann, P. J.↗
NASA NTRS1981

A molecular model for ice nucleation and growth, attachment 2

The central field empirical pair potential model is applied to studying the effects of kinks, ledges, and vacancies on the absorption of water molecules from the vapor. Molecular dynamics simulations indicate that cluster and/or surface modes play a primary role in the absorption process, the flexibility of the hydrogen bond serves to decrease the energy required for structural interconversion, and the rapid distribution of added energy in a hydrogen bonded system lead to aggregate stability which greatly exceeds that predicted by static energy calculations.

Hale, B. N.↗
DOE OSTI2024

Role of humidity and surface roughness on direct wafer bonding

Bodies made from elastically stiff material usually bind very weakly unless the surfaces are flat and extremely smooth. In direct wafer bonding flat surfaces bind by capillary bridges and by the van der Waals interaction, which act between all solid objects. Here we study the dependency of the work of adhesion on the humidity and surface roughness in hydrophilic direct wafer bonding. We show that the long-wavelength roughness (usually denoted waviness) has a negligible influence on the strength of wafer bonding (the work of adhesion) from the menisci that form from capillary condensation of water vapor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1981

Thermal and stress analysis of thermal barrier coatings

An analysis has been performed that predicts the thermomechanical behavior of thermal barrier coated specimens. The analysis predicts the behavior during both plasma spray coating application and burner rig testing conditions simulating engine operation. The analysis was accomplished through utilization of one-dimensional through thickness and two-dimensional finite element calculations. The results of these calculations showed that specimens with a substrate control temperature between 300 F and 600 F would be optimum. Controlling substrate temperature was found to have a more dominant effect on the mechanical strains than the ceramic or substrate thicknesses. The predicted stresses and mechanical strains at the bond-coating interface are large enough to cause cracks in this region where post-test observations have determined coating failures originate.

Cassenti, B. N.↗
NASA NTRS1999

Anisotropic Plasticity of BN Nanotubes

Plastic collapse of compressed BN nanotubes are investigated and compared with carbon nanotubes of similar nature. Using a generalized tight-binding molecular dynamics (GTBMD) method for system containing B, N and C atoms we compute stiffness and plastic collapse of BN and C nanotubes under axial compression. For small compressional strain, BN nanotubes are found to be about 92% as stiff as similar C nanotubes. Due to BN bond buckling effect, however, the elastic limit of BN nanotubes is found to be more than C nanotubes. A route to plasticity is explored in which we find that at elastic limit the accumulated strain is released by a local plastic deformation of the nanotube. The mechanism of strain release and the resulting plastic deformation, however. are anisotropic in nature. The strain is released preferentially towards N as leading edge of a buckled BN bond and the tube, compressed at both ends, plastically collapses preferentially towards one end. Details of the anisotropic plasticity and prospective applications will be discussed in this presentation.

Madhu, Menon↗
NASA NTRS2003

Spectral Characteristic of Tholin Produced from Possible Early Earth Atmospheres and its Role in Antigreenhouse Effect on Early Earth

We have produced organic material simulating a methane photochemical haze in a CO2- rich atmosphere of the early Earth by irradiating gas mixtures in an inductively coupled cold plasma chamber with pressure approx. 0.25 mbar at 100 W total power. The flow rate was 24 cm3 min. We added progressively higher levels of CH, by combining gas mixtures of N2/CH4 (9/1) and N2/CO2 (9/1) to change the ratio of CH4/CO2. Tholin was accumulated for 5 hours in each experiment; the onset of tholin formation is in the range CH4/CO2 = 0.5 to 1. As the mixing ratio of CH, is increased, the production rate of the brownish tholin film increases. IR spectra showed the C-H and N-H bands similar to that of Titan tholin and closely resemble Titan tholin made at 0.13 mbar pressure. A decrease in the CH bonds on decreasing CH4/CO2 is noted. Ether bands (-(2-O-C) were tentatively detected, but no detectable carbonyl (C=O) band was found. The absorption in the UV region for the early Earth tholin is found to be substantially greater than the Titan tholin. Quantitative values of the optical constants of early Earth tholin are currently being measured.

Khare, B. N.↗
NASA NTRS1990

Interfacial sliding near a free surface in a fibrous or layered composite during thermal cycling

This paper presents a simple shear lag model of interfacial sliding at a free surface in a layered or continuous fiber composite. The interface is characterized by a critical interfacial shear stress, tau0, which might represent the critical stress for frictional sliding at a weakly bonded interface, or the shear flow stress of a thin ductile interface layer at a well bonded interface. The history, during heating and cooling, of the relative normal displacement of the reinforcing inclusions and the matrix on a free surface cut normal to the inclusions is calculated and shown to depend on both the absolute value and the temperature dependence of tau0, as well as on the magnitudes of the bulk residual stresses. The variety of possible displacement histories suggests that they are a rich source of information about tau0 and the residual stresses.

Cox, B. N.↗
NASA NTRS1985

Thermal barrier coatings for the space shuttle main engine turbine blades

The Space Shuttle Main Engine (SSME) turbopump turbine blades experience extremely severe thermal shocks during start-up and shut-down. For instance, the high pressure fuel turbopump turbine which burns liquid hydrogen operates at approximately 1500 F, but is shut down fuel rich with turbine blades quenced in liquid hydrogen. This thermal shock is a major contributor to blade cracking. The same thermal shock cause the protective ZrO2 thermal barrier coatings to spall or flake off, leaving only the NiCrAlY bond coating which provides only a minimum thermal protection. The turbine blades are therefore life limited to about 3000 sec for want of a good thermal barrier. A suitable thermal barrier coating (TBC) is being developed for the SSME turbine blades. Various TBCs developed for the gas turbine engines were tested in a specially built turbine blade tester. This tester subjects the coated blades to thermal and pressure cycles similar to those during actual operation of the turbine. The coatings were applied using a plasma spraying techniques both under atmospheric conditions and in vacuum. Results are presented. In general vacuum plasma sprayed coatings performed much better than those sprayed under atmospheric conditions. A 50 to 50 blend of Cr2O3 and NiCrAlY, vacuum plasma sprayed on SSME turbopump turbine blades appear to provide significant improvements in coating durability and thermal protection.

Bhat, B. N.↗
DOE OSTI2026

Evaluation of the interfacial bonding strength between hafnia and silica layers deposited by electron-beam evaporation

Factors contributing to the mechanical strength of multilayer optical coatings involving alternating layers of electron-beam evaporated hafnia and silica is investigated. It is observed that upon rupture resulting from nanosecond laser damage, fragments consisting of layer pairs are produced. These pairs are formed as a result of a strong asymmetry in adhesion strength between interfaces, leading to preferential delamination at interfaces where silica is deposited on hafnia, and not the reverse, despite the fact that both interface types consist of the same pair of materials. The observed disparity in adhesion strength was further studied using nanomechanical scratch tests, revealing loads at which fracture occurs, and fracture morphology, both of which are highly dependent on deposition order. Based on these measurements, along with the morphological analysis of the nanostructure of the coatings, we conclude that the surface microstructure in each coating layer affects its adhesion strength with the succeeding layer. The findings outlined here are particularly relevant to the production of large aperture, high-performance optics designed for use in next-generation lasers.

adhesion strength↗
DOE OSTI2022

Strain dependent electronic and optical responses of penta-BCN monolayer

We report here, structural, dynamic, and mechanical stability in pentagonal boron carbon nitride (p-BCN) monolayer, a new member of direct bandgap two-dimensional (2D) semiconductor. The identified visible range bandgap with excellent mechanical strength allows it to be a promising candidate material in optoelectronics, nanomechanics, and optomechanical sensors. By employing density functional theory (DFT), we reveal a unique geometrical reconstruction with rigidity in B–N and C–N bond lengths with applied strain. These quasi-sp 3 hybridized short and strong covalent bonding and unique geometry support the monolayer to possess extraordinary mechanical response. The desired bandgap is manipulated by loading the biaxial strain. Most importantly, our predictions on p-BCN show excellent optical response such as good static dielectric constant and refractive index, strong optical absorption (up to 1.08 x 10 5 cm -1 in VR and 7.01 x 10 cm -1 in UV) with small energy loss and reflectance both appearing in visible and ultraviolet regions (UV). The desired optical response along with the blue and red shift is demonstrated by tailoring with tensile and compressive strain. The predicted strong optical anisotropy provides it’s application in polarized photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of boron concentration on local structure and spontaneous polarization in AlBN thin films

The discovery of ferroelectricity in polar wurtzite-based ternary materials, such as Al 1–x B x N, has attracted attention due to their compatibility with complementary metal–oxide–semiconductor processes and potential use in integrated non-volatile memory devices. However, the origin of ferroelectricity and the fundamental control of the polarization switching in these materials are still under intensive investigation but appear to be related to local disorder induced from the alloying. In this work, we report the effect of boron alloying on the local structure of Al 1–x B x N films deposited by magnetron sputtering. Our results reveal a diminished crystalline order as a function of boron concentration, accompanied by a reduction in the spontaneous polarization. The film disorder is primarily associated with the dissimilar bond lengths between Al–N and B–N and the formation of threading dislocations induced by B incorporation in the structure.

36 MATERIALS SCIENCE↗