Search NASA⌕ Search

SEARCH · Search NASA

Results for “B4C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Microstructure of Mo/Si multilayers with B4C diffusion barrier layers

The growth behavior of B4C interlayers deposited at the interfaces of Mo/Si multilayers was investigated using x-ray photoemission spectroscopy, x-ray reflectivity, and x-ray diffraction measurements. We report an asymmetry in the formation of B4C at the B4C-on-Mo interface compared to the B4C-on-Si interface. X-ray photoelectron spectroscopy (XPS) depth profiling shows that for B4C-on-Mo the formed stoichiometry is close to expectation (4:1 ratio), while for B4C-on-Si it is observed that carbon diffuses from the B4C interfaces into the multilayer, resulting in nonstochiometric growth (>4:1). As a result, there is a discrepancy in the optical response near 13.5 nm wavelength, where B4C-on-Mo behaves according to model simulations, while B4C-on-Si does not. The as-deposited off-stoichiometric B4C-on-Si interface also explains why these interfaces show poor barrier properties against temperature induced interdiffusion. We show that the stoichiometry of B4C at the Mo-Si interfaces is connected to the structure of the layers onto which B4C is grown. Because of enhanced diffusion into the amorphous Si surface, we suggest that deposited boron and carbon atoms form SiXBY and SiXCY compounds. The low formation enthalpy of SiXCY ensures C depletion of any BXCY interlayer. Only after a saturated interfacial layer is formed, does further deposition of boron and carbon atoms result in actual B4C formation. In contrast to the off-stoichiometric B4C growth on top of Si, B4C grown on top of Mo retains the correct stoichiometry because of the higher formation enthalpies for MoXBY and MoXCY formation and the limited diffusion depth into the (poly)-crystalline Mo surface.

36 MATERIALS SCIENCE↗

Anomalous stability of non-van der Waals bonded B4C nanosheets through surface reconstruction

Boron carbide (B4C) has been well studied both theoretically and experimentally in its bulk form due to its exceptional hardness and use as a high-temperature thermoelectric. However, the properties of its two-dimensional nanosheets are not well established. In this paper, using van der Waals-corrected density-functional theory simulations, we show that bulk B4C can be cleaved along different directions to form B4C nanosheets with low formation energies. We find that there is minimal dependence of formation energies on cleavage planes and surface terminations, even though the bulk is not van der Waals layered. This anomalous stability of B4C nanosheets is found to be a result of surface reconstructions that are unique to B-rich systems. While the density of states of the bulk B4C indicate that it is a semiconductor, the B4C nanosheets are found to be predominantly metallic. We attribute this metallic behavior to a redistribution of charges on the surface bonds of the films. The Seebeck coefficients of the B4C films remain comparable to those of the bulk and are nearly constant as a function of temperature. Our results provide guidance for experimental synthesis efforts and future application of B4C nanosheets in nanoelectronic and thermoelectric applications.

Physics↗

Optimization study of B4C filter thickness for shifting to fast spectrum at experimental position in NRAD core

The Japan Atomic Energy Agency (JAEA) has investigated an accelerator-driven system (ADS) to transmute minor actinides (MAs) partitioned from the high level waste. In the nuclear transmutation system such as the ADS, the nuclear data validation of MA is required to reduce the uncertainty caused by the nuclear data of MA. In order to validate the nuclear data, many independent experimental data need to be mutually compared. The Idaho National Laboratory (INL) considers the measurement of fission rate ratio and sample worth with a wide spectral indices by inserting several types of thermal neutron shielding filters in the experimental position in Neutron RADiography (NRAD) which is the thermal neutron reactor. The JAEA has a plan to perform integral experiments with fission chambers in the NRAD because of the expansion of the experimental data contributing to nuclear data validation of MA. In this study, the optimization of the NRAD core configuration, the B4C filter thickness, and the experimental position design was conducted to acquire the high-accuracy and the beneficial experimental data by using MCNP 6.1 and ENDF/B-VII.1. First, by locating the experimental position as close to the center of the core as possible and concentrating the fuel around that position, the neutron flux of the optimized model could be constructed 2.5 times as much as that of the previous model. Second, the optimized B4C filter thickness was determined to be 3mm based on the comprehensive evaluation from the viewpoints of the shielding ability of low energy neutrons, the level of the total neutron flux, and the influence of fabrication accuracy of the B4C filter. Third, we constructed the experimental position model that could further reduce the influence of the low energy neutrons by adopting the aluminum dry box and the bottom filter. Moreover, the neutron energy spectrum of the tentative optimized model constructed by following the above results was compared with that of the fast neutron reactors such as the ADS and the Fast Critical Assembly (FCA). As a result, the tentative optimized model would be able to be obtained the beneficial experimental data for the verification of FCA-IX series data and the validation of MA nuclear data for accuracy improvement of ADS design. Furthermore, the adoption of the tentative optimized model would be acquired the experimental data such as fission reaction rate and sample worth with the wider spectral indices than the previous one because the tentative optimized model would be able to increase the ratio of the fast neutrons by almost completely eliminating the effect of the thermal neutrons.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-pressure polymorphism of two high-strength ceramics: Boron carbide (B4C) and silicon carbide (SiC)

We have determined the lattice-level structure of two high-strength, technologically important ceramic materials under shock wave compression. For decades, laboratory shock wave studies have provided crucial information on the dynamic response of many types of materials. However, previous studies were limited to continuum-level information only. By combining laser compression with pulsed X-ray diffraction we are able to obtain in situ structural information on these materials for the first time. Silicon carbide (SiC) and boron carbide (B4C) are two high-strength ceramics with many technical applications including debris shielding, armoring, and coating. We have carried out Xray diffraction measurements of the structure of SiC and B4C under shock compression to 185 and 300 GPa, respectively. Experiments were performed at the Matter in Extreme Conditions beamline of the Linac Coherent Light Source (LCLS). At LCLS, shock waves are driven into the sample using a high powered laser with approximately 10 nanosecond pulse length. The sample is probed with X-rays from the LCLS free electron laser and diffraction is recorded by x-ray detectors. By varying the delay between the laser and the x-ray probe, the sample can be studied at various times relative to the shock wave entering the sample. The diffraction data have been analyzed to determine the crystal structures, lattice parameters, density, and crystallographic texture as a function of pressure and loading time.

36 MATERIALS SCIENCE↗

SiC or B4C-B/low strategic element content composite

Advancements in materials technologies are needed to provide the aerospace industry with alternate material options in the event of future strategic metal shortages and to optimize performance of engines. Composite materials are promising candidates for such an application. The potential of SiC and B4C-B filament reinforced low strategic element iron-base alloy content composites or use at 760 to 870 C is considered. A limiting factor towards developing this material for high temperature use has been the reaction between the filament and matrix material during fabrication and service which degrades filament strength. A low temperature fabrication process to limit filament/matrix reaction is being developed which involves the use of hollow cathode sputtering to coat the filaments with iron-base alloys of various compositions. An investigation is being conducted to determine the interfacial reaction effects of SiC and B4C-B filaments with iron-base alloys to develop an understanding of filament/matrix alloy compatibility for 760 to 870 C service.

Petrasek, D. W.↗

Making Single Crystals of B4C

Crystals precipitate from solution in copper. Well-defined single crystals of boron carbide (B4C) grown by slowly cooling melts containing B4C and copper. Forms on surface and in interior of melt.

Feigelson, Robert S.↗

Materials Data on B4C by Materials Project

B4C crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are fifty-six inequivalent B sites. In the first B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.62–2.06 Å. In the second B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.68–1.92 Å. In the third B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.68–1.99 Å. In the fourth B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.63–2.03 Å. In the fifth B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.66–1.90 Å. In the sixth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 1.69 Å. The B–C bond length is 1.59 Å. In the seventh B site, B is bonded in a distorted single-bond geometry to three B and one C atom. The B–B bond length is 1.85 Å. The B–C bond length is 1.71 Å. In the eighth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–C bond length is 1.67 Å. In the ninth B site, B is bonded in a single-bond geometry to three B and one C atom. The B–B bond length is 1.72 Å. The B–C bond length is 1.38 Å. In the tenth B site, B is bonded in a 6-coordinate geometry to five B and one C atom. There are a spread of B–B bond distances ranging from 1.68–1.91 Å. The B–C bond length is 2.03 Å. In the eleventh B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 1.87 Å. The B–C bond length is 1.72 Å. In the twelfth B site, B is bonded in a distorted bent 120 degrees geometry to three B and two C atoms. There are a spread of B–B bond distances ranging from 1.68–1.98 Å. Both B–C bond lengths are 1.59 Å. In the thirteenth B site, B is bonded in a single-bond geometry to one B and one C atom. The B–B bond length is 1.73 Å. The B–C bond length is 1.38 Å. In the fourteenth B site, B is bonded in a 1-coordinate geometry to five B and one C atom. There are a spread of B–B bond distances ranging from 1.69–1.86 Å. The B–C bond length is 1.81 Å. In the fifteenth B site, B is bonded in a distorted bent 120 degrees geometry to three B and two C atoms. The B–B bond length is 1.84 Å. There is one shorter (1.39 Å) and one longer (1.68 Å) B–C bond length. In the sixteenth B site, B is bonded in a distorted single-bond geometry to three B and one C atom. There is one shorter (1.64 Å) and one longer (2.01 Å) B–B bond length. The B–C bond length is 1.58 Å. In the seventeenth B site, B is bonded in a 1-coordinate geometry to four B and two C atoms. The B–B bond length is 1.66 Å. There is one shorter (1.72 Å) and one longer (1.81 Å) B–C bond length. In the eighteenth B site, B is bonded in a 6-coordinate geometry to five B and one C atom. There are a spread of B–B bond distances ranging from 1.64–1.85 Å. The B–C bond length is 2.00 Å. In the nineteenth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 1.78 Å. The B–C bond length is 1.59 Å. In the twentieth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–C bond length is 1.72 Å. In the twenty-first B site, B is bonded in a single-bond geometry to two B and one C atom. The B–B bond length is 1.89 Å. The B–C bond length is 1.38 Å. In the twenty-second B site, B is bonded in a 1-coordinate geometry to two B and one C atom. The B–B bond length is 1.69 Å. The B–C bond length is 1.65 Å. In the twenty-third B site, B is bonded in a distorted bent 120 degrees geometry to three B and two C atoms. There is one shorter (1.74 Å) and one longer (1.84 Å) B–B bond length. There is one shorter (1.39 Å) and one longer (1.67 Å) B–C bond length. In the twenty-fourth B site, B is bonded in a 1-coordinate geometry to four B and two C atoms. There is one shorter (1.67 Å) and one longer (1.88 Å) B–B bond length. There is one shorter (1.74 Å) and one longer (1.83 Å) B–C bond length. In the twenty-fifth B site, B is bonded in a distorted single-bond geometry to two B and two C atoms. The B–B bond length is 1.62 Å. There is one shorter (1.59 Å) and one longer (1.95 Å) B–C bond length. In the twenty-sixth B site, B is bonded in a distorted single-bond geometry to three B and one C atom. The B–B bond length is 2.04 Å. The B–C bond length is 1.66 Å. In the twenty-seventh B site, B is bonded in a 1-coordinate geometry to five B and one C atom. The B–C bond length is 1.81 Å. In the twenty-eighth B site, B is bonded in a 6-coordinate geometry to five B and one C atom. There are a spread of B–B bond distances ranging from 1.61–1.86 Å. The B–C bond length is 2.00 Å. In the twenty-ninth B site, B is bonded in a distorted bent 120 degrees geometry to one B and two C atoms. The B–B bond length is 1.86 Å. There is one shorter (1.62 Å) and one longer (1.72 Å) B–C bond length. In the thirtieth B site, B is bonded in a distorted single-bond geometry to one B and one C atom. The B–C bond length is 1.58 Å. In the thirty-first B site, B is bonded in a single-bond geometry to two B and one C atom. There is one shorter (1.73 Å) and one longer (1.93 Å) B–B bond length. The B–C bond length is 1.38 Å. In the thirty-second B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.67–2.00 Å. In the thirty-third B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 1.69 Å. The B–C bond length is 1.64 Å. In the thirty-fourth B site, B is bonded in a 1-coordinate geometry to two B and two C atoms. The B–B bond length is 1.73 Å. There is one shorter (1.39 Å) and one longer (1.84 Å) B–C bond length. In the thirty-fifth B site, B is bonded in a distorted single-bond geometry to three B and one C atom. There is one shorter (1.67 Å) and one longer (1.85 Å) B–B bond length. The B–C bond length is 1.71 Å. In the thirty-sixth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–C bond length is 1.58 Å. In the thirty-seventh B site, B is bonded in a 6-coordinate geometry to six B atoms. The B–B bond length is 2.08 Å. In the thirty-eighth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–C bond length is 1.67 Å. In the thirty-ninth B site, B is bonded in a distorted bent 120 degrees geometry to one B and two C atoms. The B–B bond length is 1.86 Å. There is one shorter (1.63 Å) and one longer (1.72 Å) B–C bond length. In the fortieth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–C bond length is 1.57 Å. In the forty-first B site, B is bonded in a single-bond geometry to one B and one C atom. The B–B bond length is 1.73 Å. The B–C bond length is 1.38 Å. In the forty-second B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.69–1.98 Å. In the forty-third B site, B is bonded in a 1-coordinate geometry to two B and two C atoms. The B–B bond length is 1.72 Å. There is one shorter (1.39 Å) and one longer (1.85 Å) B–C bond length. In the forty-fourth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 1.86 Å. The B–C bond length is 1.71 Å. In the forty-fifth B site, B is bonded in a 2-coordinate geometry to two B and two C atoms. The B–B bond length is 1.61 Å. There is one shorter (1.59 Å) and one longer (1.73 Å) B–C bond length. In the forty-sixth B site, B is bonded in a 6-coordinate geometry to six B atoms. The B–B bond length is 2.06 Å. In the forty-seventh B site, B is bonded in a 6-coordinate geometry to six B atoms. In the forty-eighth B site, B is bonded in a single-bond geometry to two B and one C atom. The B–B bond length is 1.73 Å. The B–C bond length is 1.38 Å. In the forty-ninth B site, B is bonded in a 6-coordinate geometry to six B atoms. There are a spread of B–B bond distances ranging from 1.71–1.98 Å. In the fiftieth B site, B is bonded in a 2-coordinate geometry to two B and two C atoms. The B–B bond length is 1.62 Å. There is one shorter (1.59 Å) and one longer (1.71 Å) B–C bond length. In the fifty-first B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 1.86 Å. The B–C bond length is 1.70 Å. In the fifty-second B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–B bond length is 2.07 Å. The B–C bond length is 1.67 Å. In the fifty-third B site, B is bonded in a 6-coordinate geometry to six B atoms. In the fifty-fourth B site, B is bonded in a 6-coordinate geometry to six B atoms. There is one shorter (1.71 Å) and one longer (1.84 Å) B–B bond length. In the fifty-fifth B site, B is bonded in a 6-coordinate geometry to six B atoms. The B–B bond length is 2.08 Å. In the fifty-sixth B site, B is bonded in a distorted single-bond geometry to two B and one C atom. The B–C bond length is 1.67 Å. There are fourteen inequivalent C sites. In the first C site, C is bonded in a trigonal planar geometry to three B atoms. In the second C site, C is bonded in a 6-coordinate geometry to six B atoms. In the third C site, C is bonded in a trigonal planar geometry to three B atoms. In the fourth C site, C is bonded in a trigonal planar geometry to three B atoms. In the fifth C site, C is bonded in a 6-coordinate geometry to six B atoms. In the sixth C site, C is bonded in a 6-coordinate geometry to six B atoms. In the seventh C site, C is bonded in a trigonal planar geometry to three B atoms. In the eighth C site, C is bonded in a trigonal planar geometry to three B atoms. In the ninth C site, C is bonded in a 6-coordinate geometry to six B atoms. In the tenth C site, C is bonded in a trigonal planar geometry to three B atoms. In the eleventh C site, C is bonded in a trigonal planar geometry to three B atoms. In the twelfth C site, C is bonded in a trigonal planar geometry to three B atoms. In the thirteenth C site, C is bonded in a trigonal planar geometry to three B atoms. In the fourteenth C site, C is bonded in a trigonal planar geometry to three B atoms.

36 MATERIALS SCIENCE↗

Materials Data on B4C by Materials Project

B4C crystallizes in the trigonal R-3m space group. The structure is three-dimensional. there are two inequivalent B sites. In the first B site, B is bonded in a distorted single-bond geometry to two B and one C atom. Both B–B bond lengths are 1.71 Å. The B–C bond length is 1.64 Å. In the second B site, B is bonded in a 5-coordinate geometry to five B atoms. There is two shorter (1.77 Å) and two longer (1.79 Å) B–B bond length. There are two inequivalent C sites. In the first C site, C is bonded to three equivalent B and one C atom to form distorted corner-sharing CB3C tetrahedra. The C–C bond length is 1.31 Å. In the second C site, C is bonded in a linear geometry to two equivalent C atoms.

36 MATERIALS SCIENCE↗

Materials Data on B4C by Materials Project

B4C crystallizes in the trigonal R-3m space group. The structure is three-dimensional. there are two inequivalent B sites. In the first B site, B is bonded in a distorted single-bond geometry to three equivalent B and one C atom. All B–B bond lengths are 1.79 Å. The B–C bond length is 1.66 Å. In the second B site, B is bonded in a 6-coordinate geometry to six B atoms. There is one shorter (1.72 Å) and two longer (1.83 Å) B–B bond length. There are two inequivalent C sites. In the first C site, C is bonded in a linear geometry to two equivalent C atoms. Both C–C bond lengths are 1.33 Å. In the second C site, C is bonded to three equivalent B and one C atom to form corner-sharing CB3C tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on B4C by Materials Project

B4C crystallizes in the trigonal R-3m space group. The structure is three-dimensional. there are two inequivalent B sites. In the first B site, B is bonded in a single-bond geometry to two equivalent B and one C atom. There is one shorter (1.57 Å) and one longer (1.90 Å) B–B bond length. The B–C bond length is 1.61 Å. In the second B site, B is bonded in a 4-coordinate geometry to four B atoms. Both B–B bond lengths are 1.65 Å. There are two inequivalent C sites. In the first C site, C is bonded in a linear geometry to two equivalent C atoms. Both C–C bond lengths are 1.38 Å. In the second C site, C is bonded to three equivalent B and one C atom to form distorted corner-sharing CB3C tetrahedra.

36 MATERIALS SCIENCE↗

SPC-70692 Rev 0 MARVEL B4C Powder Specification

A. Idaho National Laboratory (INL) is developing a microreactor to produce electrical power utilizing a small nuclear core and Stirling engines under the Microreactor Application Research Validation and Evaluation (MARVEL) program. This procurement specification defines the requirements for procurement of the B4C Powder. B. Any conflict between this specification and referenced Codes and Standards, or any supplementary specifications in the procurement documents requires written clarification from the Contractor prior to proceeding with any work. Any deviation from the procurement documents requires approval by the Contractor with the change request process.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

SPC-70774 Rev 0 MARVEL Black Rod B4C Pellets Print Fabrication Specification

A. Idaho National Laboratory (INL) is developing a microreactor to produce electrical power utilizing a small nuclear core and Stirling engines under the Microreactor Application Research Validation and Evaluation (MARVEL) program. This procurement specification defines the requirements for fabrication of the MARVEL Black Rod B4C pellets. B. Any conflict between this specification and referenced Codes and Standards, or any supplementary specifications in the procurement documents requires written clarification from the Contractor prior to proceeding with any work. Any deviation from the procurement documents requires approval by the Contractor with the change request process.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

PROCESSING, MICROSTRUCTURE AND MECHANICAL PROPERTY CORRELATION IN Al-B4C SURFACE COMPOSITE PRODUCED VIA FRICTION STIR PROCESSING

Friction stir processing (FSP) was employed to prepare surface composites (SC) composed of B4C particles in 5024 Al matrix. The processing parameters, such as hole pattern and geometry,and the number of FSP passes, were optimized to obtain uniform powder distribution. The micrographs revealed a homogeneous distribution of the particles with good interfacial bonding. The hardness of the composite was uniform across the processed region which again indicates the uniformity of powder distribution. The modulus of the surface composite was measured using strain gage and showed a significant improvement. This improvement in modulus lies in the load sharing capability from the soft matrix to the hard particles.

Aluminum MMC,↗

Rate-dependent strength and deformation heterogeneity of B4C-reinforced Al composite: Time-resolved imaging with synchrotron X-rays

Dynamic (up to 5500 s -1 ) and quasi-static compression tests are conducted on a 15 wt% B4C particle-reinforced Al (B 4 C/Al) composite. In situ, high-speed synchrotron X-ray phase contrast imaging and digital image correlation are employed to map mesoscale deformation fields at μm and μs scales. The bulk stress–strain curves show significant strain and strain-rate hardening under dynamic compression. The strain-rate sensitivity exponent is an order of magnitude higher at high strain rates (> 10 3 s -1 ) than that at low strain rates (< 10 -2 s -1 ). Strain field mapping demonstrates distinct compressive strain localizations for both quasi-static and dynamic loading. Nevertheless, compressive strain localizations appear denser in spacing under dynamic loading, owing to spontaneous dislocation nucleation in both weak and strong zones. This results in a higher density of geometrically necessary dislocations, which contributes to the higher strain and strain-rate hardening of B 4 C/Al under dynamic loading. Additionally, the ratio of the maximum local strain to the bulk average is 1.5, and the local strain-rate enhancement cannot explain the increased rate sensitivity of B 4 C/Al under dynamic loading. Therefore, the rate-dependent deformation heterogeneity dominates the strain-rate hardening of B 4 C/Al. Postmortem analyses help correlate deformation features to particle- and grain-scale microstructures, yielding consistent results with mesoscale strain fields.

36 MATERIALS SCIENCE↗