Search NASA⌕ Search

SEARCH · Search NASA

Results for “BARIUM 147”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 147

The 1992 evaluation of A = 147 (1992De38) was updated using data available prior to Nov. 14, 2008.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of High-energy Excited States and γ-rays of Fission Products with a 4π Clover Detector

Gamma-rays in the β-decay of {sup 147}La and {sup 145}Ba were measured using a 4π clover detector to identify high-energy excited levels and γ-rays. In order to determine γ-ray intensities, an efficiency calibration was carried out using single and multiple γ-ray emitters. Applying appropriate coincidence summing corrections, the peak efficiency was experimentally determined from 50 to 3200 keV with 3% accuracy. Through analyses of sum peaks and cascade relations of γ-rays, we newly identified 170 levels between 924 and 3568 keV, and more than 930 γ-rays in the decay of {sup 147}La, and 70 levels between 973 and 3703 keV, and 250 γ-rays in the decay of {sup 145}Ba.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Medium-spin structure of {sup 145}Cs

Excited states in {sup 145}Cs, populated following the spontaneous fission of {sup 248}Cm, were studied by means of prompt-gamma spectroscopy, using the EUROGAM2 multidetector array. A new level scheme of {sup 145}Cs was proposed. We identified a decoupled band corresponding to 1/2[550] proton configuration and interpreted the ground-state band as a mixed configuration of 1/2[440] and 3/2[422] proton orbitals. Quasiparticle-rotor calculations performed for {sup 145}Cs support such assignments. The electric dipole moment in {sup 145}Cs, D{sub 0}=0.013(4) efm, is smaller than in lighter Cs isotopes, which suggests that octupole correlations in Cs isotopes decrease at the neutron number N=90, similarly as observed in the {sup 146}Ba and {sup 147}La isotones.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Product Data Measured at Los Alamos for Fission Spectrum and Thermal Neutrons on {sup 239}Pu, {sup 235}U, {sup 238}U

We describe measurements of fission product data at Los Alamos that are important for determining the number of fissions that have occurred when neutrons are incident on plutonium and uranium isotopes. The fission-spectrum measurements were made using a fission chamber designed by the National Institute for Standards and Technology (NIST) in the BIG TEN critical assembly, as part of the Inter-laboratory Liquid Metal Fast Breeder Reactor (LMFBR) Reaction Rate (ILRR) collaboration. The thermal measurements were made at Los Alamos' Omega West Reactor. A related set of measurements were made of fission-product ratios (so-called R-values) in neutron environments provided by a number of Los Alamos critical assemblies that range from having average energies causing fission of 400-600 keV (BIG TEN and the outer regions of the Flattop-25 assembly) to higher energies (1.4-1.9 MeV) in the Jezebel, and in the central regions of the Flattop-25 and Flattop-Pu, critical assemblies. From these data we determine ratios of fission product yields in different fuel and neutron environments (Q-values) and fission product yields in fission spectrum neutron environments for {sup 99}Mo, {sup 95}Zr, {sup 137}Cs, {sup 140}Ba, {sup 141,143}Ce, and {sup 147}Nd. Modest incident-energy dependence exists for the {sup 147}Nd fission product yield; this is discussed in the context of models for fission that include thermal and dynamical effects. The fission product data agree with measurements by Maeck and other authors using mass-spectrometry methods, and with the ILRR collaboration results that used gamma spectroscopy for quantifying fission products. We note that the measurements also contradict earlier 1950s historical Los Alamos estimates by {approx}5-7%, most likely owing to self-shielding corrections not made in the early thermal measurements. Our experimental results provide a confirmation of the England-Rider ENDF/B-VI evaluated fission-spectrum fission product yields that were carried over to the ENDF/B-VII.0 library, except for {sup 99}Mo where the present results are about 4%-relative higher for neutrons incident on {sup 239}Pu and {sup 235}U. Additionally, our results illustrate the importance of representing the incident energy dependence of fission product yields over the fast neutron energy range for high-accuracy work, for example the {sup 147}Nd from neutron reactions on plutonium. An upgrade to the ENDF library, for ENDF/B-VII.1, based on these and other data, is described in a companion paper to this work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Product Yields from Fission Spectrum n+{sup 239}Pu for ENDF/B-VII.1

We describe a new cumulated fission product yield (FPY) evaluation for fission spectrum neutrons on plutonium that updates the ENDF/B-VI evaluation by England and Rider, for the forthcoming ENDF/B-VII.1 database release. We focus on FPs that are needed for high accuracy burnup assessments; that is, for inferring the number of fissions in a neutron environment. Los Alamos conducted an experiment in the 1970s in the Bigten fast critical assembly to determine fission product yields as part of the Interlaboratory Reaction Rate (ILRR) collaboration, and this has defined the Laboratory's fission standard to this day. Our evaluation includes use of the LANL-ILRR measurements (not previously available to evaluators) as well as other Laboratory FPY measurements published in the literature, especially the high-accuracy mass spectrometry data from Maeck and others. Because the measurement database for some of the FPs is small - especially for {sup 99}Mo - we use a meta-analysis that incorporates insights from other accurately-measured benchmark FP data, using R-value ratio measurements. The meta-analysis supports the FP measurements from the LANL-ILRR experiment. Differences between our new evaluations and ENDF/B-VI are small for some FPs (less than 1-2%-relative for {sup 95}Zr, {sup 140}Ba, {sup 144}Ce), but are larger for {sup 99}Mo (4%-relative) and {sup 147}Nd (5%-relative, at 1.5 MeV) respectively. We present evidence for an incident neutron energy dependence to the {sup 147}Nd fission product yield that accounts for observed differences in the FPY at a few-hundred keV average energy in fast reactors versus measurements made at higher average neutron energies in Los Alamos' fast critical assemblies. Accounting for such FPY neutron energy dependencies is important if one wants to reach a goal of determining the number of fissions to accuracies of 1-2%. An evaluation of the energy-dependence of fission product yields is given for all A values based on systematical trends in the measured data, with a focus on the energy dependence over the fast neutron energy range from 0.2-2 MeV. Based on these trends, we present an evaluation of the FPY data at 0.5 and 2.0 MeV average incident neutron energies. This new set of ENDF/B-VII data will enable users to linearly interpolate between the pooled FPY data at {approx}0.5 MeV and our new data at 2 MeV to obtain FPYs at other energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗