Search NASA⌕ Search

SEARCH · Search NASA

Results for “BISMUTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Structural Dynamics and Evolution of Bismuth Electrodes during Electrochemical Reduction of CO 2 in Imidazolium-Based Ionic Liquid Solutions

Real-time changes in the composition and structure of bismuth electrodes used for catalytic conversion of CO2 into CO were examined via X-ray absorption spectroscopy (including XANES and EXAFS), electrochemical quartz crystal microbalance (EQCM), and in situ X-ray reflectivity (XR). Measurements were performed with bismuth electrodes immersed in acetonitrile (MeCN) solutions containing a 1-butyl-3-methylimidazolium ([BMIM]+) ionic liquid promoter or electrochemically inactive tetrabutylammonium supporting electrolytes (TBAPF6 and TBAOTf). Altogether, these measurements show that bismuth electrodes are originally a mixture of bismuth oxides (including Bi2O3) and metallic bismuth (Bi0) and that the reduction of oxidized bismuth species to Bi0 is fully achieved under potentials at which CO2 activation takes place. Furthermore, EQCM measurements conducted during cyclic voltammetry revealed that a bismuth-coated quartz crystal exhibits significant shifts in resistance (ΔR) prior to the onset of CO2 reduction near -1.75 V vs Ag/AgCl and pronounced hysteresis in frequency (Δf) and ΔR, which suggests significant changes in roughness or viscosity at the Bi/[BMIM]+ solution interface. In situ XR performed on rhombohedral Bi (001) oriented films indicates that extensive restructuring of the bismuth film cathodes takes place upon polarization to potentials more negative than -1.6 V vs Ag/AgCl, which is characterized by a decrease of the Bi (001) Bragg peak intensity of ≥50% in [BMIM]OTf solutions in the presence and absence of CO2. Over 90% of the reflectivity is recovered during the anodic half-scan, suggesting that the structural changes are mostly reversible. In contrast, such a phenomenon is not observed for thin Bi (001) oriented films in solutions of tetrabutylammonium salts that do not promote CO2 reduction. Overall, these results highlight that Bi electrodes undergo significant potential-dependent chemical and structural transformations in the presence of [BMIM]+-based electrolytes, including the reduction of bismuth oxide to bismuth metal and changes in roughness and near-surface viscosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Compositional dependence of optical band gap and refractive index in lead and bismuth borate glasses

Highlights: • Refractive indices increase with increasing PbO/Bi{sub 2}O{sub 3} content. • Optical band gap arises due to direct forbidden transition. • Optical band gaps decrease with increasing PbO/Bi{sub 2}O{sub 3} content. • New empirical relation between the optical band gap and the refractive index. - Abstract: We prepared a series of lead and bismuth borate glasses by varying PbO/Bi{sub 2}O{sub 3} content and studied refractive index and optical band gap as a function of glass composition. Refractive indices were measured very accurately using a Brewster’s angle set up while the optical band gaps were determined by analyzing the optical absorption edge using the Mott–Davis model. Using the Lorentz–Lorentz method and the effective medium theory, we calculated the refractive indices and then compared them with the measured values. Bismuth borate glasses show better agreement between the calculated values of the refractive index and experimental values. We used a differential method based on Mott–Davis model to obtain the type of transition and optical band gap (E{sub opt}) which in turn was compared with the value of E{sub opt} obtained using the extinction coefficient. Our analysis shows that in both lead and bismuth borate glasses, the optical band gap arises due to direct forbidden transition. With increasing PbO/Bi{sub 2}O{sub 3} content, the absorption edge shifts toward longer wavelengths and the optical band gap decreases. This behavior can be explained in terms of changes to the Pb−O/Bi−O chemical bonds with glass composition. We obtained a new empirical relation between the optical band gap and the refractive index which can be used to accurately determine the electronic oxide polarizability in lead and bismuth oxide glasses.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Structure of bismuth films obtained using an array of identically oriented single-crystal bismuth islands preliminarily grown on a substrate

An array of identically oriented single-crystal bismuth islands formed on mica plates is used as a substrate to improve the structure of bismuth thin films grown by vacuum thermal evaporation. The array of islands is formed by the chemical etching of a single-crystal bismuth film 1 μm thick grown by floating-zone recrystallization under a coating. The structure of the obtained films is studied by X-ray diffraction, atomicforce microscopy, and electron backscatter diffraction scanning electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructure Analysis of Bismuth Absorbers for Transition-Edge Sensor X-ray Microcalorimeters

Given its large X-ray stopping power and low specific heat capacity, bismuth (Bi) is a promising absorber material for X-ray microcalorimeters and has been used with transition-edge sensors (TESs) in the past. However, distinct X-ray spectral features have been observed in TESs with Bi absorbers deposited with different techniques. Evaporated Bi absorbers are widely reported to have non-Gaussian low-energy tails, while electroplated ones do not show this feature. In this study, we fabricated Bi absorbers with these two methods and performed microstructure analysis using scanning electron microscopy and X-ray diffraction microscopy. The two types of material showed the same crystallographic structure, but the grain size of the electroplated Bi was about 40 times larger than that of the evaporated Bi. This distinction in grain size is likely to be the cause of their different spectral responses.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Supportless, bismuth-modified palladium nanotubes with improved activity and stability for formic acid oxidation

Palladium nanotubes (PdNTs) were synthesized by templated vapor deposition and investigated for formic acid electrooxidation. Annealed PdNTs are 2.4 times more active (2.19 mA/cm 2 ) than commercial carbon-supported palladium (0.91 mA/cm 2 ) at 0.3 V vs RHE. Bismuth modification improved nanotube performance over 4 times (3.75 mA/cm 2 ) vs Pd/C and nearly 2 times vs unmodified PdNTs. A surface Bi coverage of 80% results in optimal site-specific activity by drastically reducing surface-poisoning CO generation during formic acid electrooxidation. The Bi-modified PdNTs are exceptionally stable, maintaining 2 times the area-normalized current density as Pd/C after 24 h at 0.2 V vs RHE. As a result, we attribute the enhanced activity and stability of the nanotube catalysts to the presence of highly coordinated surfaces, mimicking a flat polycrystal while retaining high surface area geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Giant Apparent Optical Circular Dichroism in Thin Films of Bismuth-Based Hybrid Organic-Inorganic Metal Halide Semiconductor Through Preferred Orientation

Introducing chirality into organic/inorganic hybrid materials can impart chiroptical properties such as circular dichroism. The ability to tune chiroptical properties in self-assembled materials can have important implications for spintronic and optoelectronic applications. Here, a chiral organic cation, (R/S)-4-methoxy-a-methylbenzylammonium, is incorporated to synthesize the bismuth-based hybrid organic-inorganic metal halide semiconductor, (R/S-MeOMePMA)BiI4. Thin films of this Bi-based compound demonstrate large chiroptical responses, with circular dichroism anisotropy (gCD) values up to ˜0.1, close to the highest value observed in another chiral metal-halide semiconductor, (R-MBA2CuCl4). Detailed investigation reveals that this large gCD in (R/S-MeOMePMA)BiI4 is caused by the apparent CD effect. Careful selection of deposition conditions and the concomitant thin-film orientation enables the control of gCD, with maximum value observed when its thin film has a well-crystallized preferred (001) orientation parallel to the substrate. The results support a growing body of evidence that low symmetry plays an important role in achieving unusually large gCD in these chiral metal-halide materials and provides design rules for achieving large chiroptical response via morphology control.

chiroptic response↗
DOE OSTI2018

A Versatile Thin-Film Deposition Method for Multidimensional Semiconducting Bismuth Halides

Despite the significant progress in fabricating hybrid organic-inorganic lead halide perovskite solar cells, their toxicity and low stability remain as major drawbacks, thereby hindering large-scale commercialization. Given the isoelectronic nature of lead(II) and bismuth(III) ions, potentially stable and non-toxic alternatives for efficient light absorption in thin-film photovoltaic (PV) devices may be found among bismuth-based halide semiconductors. However, high-quality polycrystalline films of many of these systems have not been demonstrated. In this work, we present a versatile and facile two-step co-evaporation approach to fabricate A 3 Bi 2 I 9 (A = Cs, Rb) and AgBi 2 I 7 polycrystalline films with smooth, pin-hole-free morphology and average grain size of > 200 nm. The process involves an initial two-source evaporation step (involving CsI, RbI or AgI, and BiI 3 sources), followed by an annealing step under BiI3 vapor. The structural, optical and electrical characteristics of the resulting thin films are studied by X-ray diffraction, optical spectroscopy, X-ray/UV photoelectron spectroscopy and scanning electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Two-dimensional ferroelectric topological insulators in functionalized atomically thin bismuth layers

We introduce a class of two-dimensional (2D) materials that possess coexisting ferroelectric and topologically insulating orders. Such ferroelectric topological insulators (FETIs) occur in noncentrosymmetric atomic layer structures with strong spin-orbit coupling (SOC). Here, we showcase a prototype 2D FETI in an atomically thin bismuth layer functionalized by CH 2 OH, which exhibits a large ferroelectric polarization that is switchable by a ligand molecule rotation mechanism and a strong SOC that drives a band inversion leading to the topologically insulating state. An external electric field that switches the ferroelectric polarization also tunes the spin texture in the underlying atomic lattice. Moreover, the functionalized bismuth layer exhibits an additional quantum order driven by the valley splitting at the K and K' points in the Brillouin zone stemming from the symmetry breaking and strong SOC in the system, resulting in a remarkable state of matter with the simultaneous presence of the quantum spin Hall and quantum valley Hall effect. These phenomena are predicted to exist in other similarly constructed 2D FETIs, thereby offering a unique quantum material platform for discovering novel physics and exploring innovative applications.

2-dimensional systems↗
DOE OSTI2015

Direct Observation of Melting in Shock-Compressed Bismuth With Femtosecond X-ray Diffraction

The melting of bismuth in response to shock compression has been studied using in situ femtosecond x-ray diffraction at an x-ray free electron laser. Both solid-solid and solid-liquid phase transitions are documented using changes in discrete diffraction peaks and the emergence of broad, liquid scattering upon release from shock pressures up to 14 GPa. The transformation from the solid state to the liquid is found to occur in less than 3 ns, very much faster than previously believed. These results are the first quantitative measurements of a liquid material obtained on shock release using x-ray diffraction, and provide an upper limit for the time scale of melting of bismuth under shock loading.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Viscosities and working region predictions for bismuth aluminoborosilicate glasses

Bismuth aluminoborosilicate glasses were prepared using a standard melt-quench technique, and the viscosity and thermal properties were measured and analyzed. Electron microprobe analysis was used to examine glass homogeneity. Fragility was calculated based on Mauro–Yue–Ellison–Gupta–Allan model fits to the viscosity curves. The system is characterized by an open structure with high fragility (44-59). Based on microanalysis and differential scanning calorimetry results, the addition of network intermediate Al2O3 appears to mitigate both phase separation and crystallization. From thermal property data, mixture models were created to predict the glass transition temperatures and softening temperatures as functions of composition. Based on K-fold validation findings, the first-order mixture model predictions of glass transition and softening appear to approximate actual values better than models with any additional second-order terms.

Gardner, Levi↗
DOE OSTI2017

Segregation-induced ordered superstructures at general grain boundaries in a nickel-bismuth alloy

The properties of materials change, sometimes catastrophically, as alloying elements and impurities accumulate preferentially at grain boundaries. Studies of bicrystals show that regular atomic patterns often arise as a result of this solute segregation at high-symmetry boundaries, but it is not known whether superstructures exist at general grain boundaries in polycrystals. In bismuth-doped polycrystalline nickel, we found that ordered, segregation-induced grain boundary superstructures occur at randomly selected general grain boundaries, and that these reconstructions are driven by the orientation of the terminating grain surfaces rather than by lattice matching between grains. This discovery shows that adsorbate-induced superstructures are not limited to special grain boundaries but may exist at a variety of general grain boundaries, and hence they can affect the performance of polycrystalline engineering alloys.

Science & Technology - Other Topics↗
DOE OSTI2019

Bismuth-Based Perovskite-Inspired Solar Cells: In Situ Diagnostics Reveal Similarities and Differences in the Film Formation of Bismuth- and Lead-Based Films

Organic–inorganic lead-based halide perovskite compounds currently yield thin film solar cells with a power conversion efficiency (PCE) of >23%. However, replacing the lead with less-toxic elements while maintaining a high PCE remains a challenge. For this reason, there has been significant effort to develop Pb-free compounds, including methylammonium bismuth iodide (MA 3 Bi 2 I 9 ), but such systems severely underperform when compared with the prototypical Pb-based methylammonium lead iodide (MAPbI 3 ). For the latter, it is known that lead complexes with polar solvents, such as dimethyl sulfoxide (DMSO) and dimethylformamide (DMF), to form iodoplumbates which can co-crystallize into solvated phases. Herein, the solidification and growth behaviors of Bi- and Pb-based films is investigated using multi-probe in situ characterization methods. It is shown that the Bi-based compound crystallizes directly and rapidly into a textured polycrystalline microstructure from a precursor solution without evolving through intermediate crystalline solvated phases, in contrast to MAPbI 3 . This solidification process produces isolated crystals and challenges the growth of continuous and crystalline films required for solar cells. Further, it is revealed that solvent engineering with antisolvent dripping is crucial to enable the formation of continuous polycrystalline films of MA 3 Bi 2 I 9 and functional solar cells thereof.

36 MATERIALS SCIENCE↗