SEARCH · Search NASA
Results for “BUCCX”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Titanium and/or Aluminum Sleeve Experiments in Fully-Reflected Water-Moderated U(4.31)O 2 Fuel Rod Lattices with 2.8 cm Pitch.
The US Department of Energy Nuclear Energy Research Initiative (NERI) funded the Bumup Credit Critical Experiment (BUCCX) at Sandia National Laboratories. The BUCCX was designed to investigate the effect of fission product materials on critical systems. The BUCCX assembly is a water-moderated and -reflected array of Zircaloy-clad triangular-pitched U(4.31)02 fuel elements. The original BUCCX experiments with rhodium are evaluated in LEU-COMP-THERM-079. In the experiments here, sets of up to 60 experiment titanium and aluminum sleeves with nominal outside diameter of 1 in (2.54 cm), wall thickness of 0.035 in (0.0889 cm), and length of 19.60 (49.784 cm) were fabricated. The sleeves are approximately the same length as the fueled section of the fuel elements and have an inner diameter that is 0.421 in (1.0693 cm) larger than the fuel elements. This allows for each sleeve to be centered around a fuel element between the grid plates within the array. Configurations differ by the number and location of sleeves. The seventeen BUCCX critical experiments reported here compare the effects of the titanium and aluminum sleeves on nearly critical fuel assembly arrays.
Water-Moderated U(4.31)O 2 Fuel Rod Lattices Containing Rhodium Foils
The US Department of Energy Nuclear Energy Research Initiative (NERI) funded the Burnup Credit Critical Experiment (BUCCX) at Sandia National Laboratories. The BUCCX was designed to investigate the effect of fission product materials on critical systems. The BUCCX assembly was a water-moderated and -reflected array of Zircaloy-clad triangular-pitched U(4.31%)0 2 fuel elements. Some of the fuel elements could be opened to allow placement of experiment materials between the fuel pellets in the element. The ten BUCCX critical experiments reported here test the effect of the fission product rhodium on the assembly. The calculated reactivity worth of the rhodium in the experiments ranged from 0% for cases with no rhodium to a maximum of 3.5% of k eff .
Design of Experiments Involving Molybdenum in SNL SPRF/CX Facility
This report is part of the collaboration with the Nuclear Criticality Safety Program and constitutes the “CED-2 report” of the experiments proposed in the SPRF/CX facility of SANDIA National Laboratories to contribute to the validation of Molybdenum in thermal energy spectrum. It supplements the study carried out in the CED-1 report by providing a more precise design of the proposed experiments and presents a complete evaluation of the experimental uncertainties. In the CED-1 report, corresponding to the preliminary design of the experiments, IRSN identified several promising configurations that could be implemented in the SPRF/CX facility of SNL. They use metallic molybdenum either in the form of foils between the UO 2 pellets inside BUCCX rods, or in the form of sleeves surrounding 7uPCX rods. In this CED-2 report, a new design using molybdenum sleeves surrounding BUCCX rods is also analyzed and the experimental uncertainties of all the proposed configurations are estimated. Given the constraints to carry out the experiments and the costs associated with the manufacturing of the foils, the experiments using molybdenum foils are discarded. Similarly, the design using molybdenum sleeves around BUCCX rods leads to significant manufacturing costs which could certainly be partially offset by use of existing grids but which would lead to slightly lower values of the integral sensitivities to the cross sections of molybdenum. Consequently, the design using molybdenum sleeves around 7uPCX rods is favored insofar as it presents higher $k_{eff}$ sensitivities to the molybdenum cross sections and that there is still possibility to reduce the number of sleeves to reduce the cost of experiments. Regarding feedback on nuclear data in support of criticality safety assessment, one of the advantages of the work described here is that the proposed experiments are not correlated with the MIRTE and FP experiments using molybdenum. In addition, they lead to higher sensitivity values in the thermal energy range than the existing experiments and partly “cover” the first resonance of the 95 Mo, which is a real advantage for improving knowledge on molybdenum cross sections.
Critical Experiments at Sandia National Laboratories: Technical Meeting on Low-Power Critical Facilities and Small Reactors
Sandia National Laboratories (SNL) has conducted radiation effects testing for the Department of Energy (DOE) and other contractors supporting the DOE since the 1960's. Over this period, the research reactor facilities at Sandia have had a primary mission to provide appropriate nuclear radiation environments for radiation testing and qualification of electronic components and other devices. The current generation of reactors includes the Annular Core Research Reactor (ACRR), a water-moderated pool-type reactor, fueled by elements constructed from UO2-BeO ceramic fuel pellets, and the Sandia Pulse Reactor III (SPR-III), a bare metal fast burst reactor utilizing a uranium-molybdenum alloy fuel. The SPR-III is currently defueled. The SPR Facility (SPRF) has hosted a series of critical experiments. A purpose-built critical experiment was first operated at the SPRF in the late 1980's. This experiment, called the Space Nuclear Thermal Propulsion Critical Experiment (CX), was designed to explore the reactor physics of a nuclear thermal rocket motor. This experiment was fueled with highly-enriched uranium carbide fuel in annular water-moderated fuel elements. The experiment program was completed and the fuel for the experiment was moved off-site. A second critical experiment, the Burnup Credit Critical Experiment (BUCCX) was operated at Sandia in 2002. The critical assembly for this experiment was based on the assembly used in the CX modified to accommodate low-enriched pin-type fuel in water moderator. This experiment was designed as a platform in which the reactivity effects of specific fission product poisons could be measured. Experiments were carried out on rhodium, an important fission product poison. The fuel and assembly hardware for the BUCCX remains at Sandia and is available for future experimentation. The critical experiment currently in operation at the SPRF is the Seven Percent Critical Experiment (7uPCX). This experiment is designed to provide benchmark reactor physics data to support validation of the reactor physics codes used to design commercial reactor fuel elements in an enrichment range above the current 5% enrichment cap. A first set of critical experiments in the 7uPCX has been completed. More experiments are planned in the 7uPCX series. The critical experiments at Sandia National Laboratories are currently funded by the US Department of Energy Nuclear Criticality Safety Program (NCSP). The NCSP has committed to maintain the critical experiment capability at Sandia and to support the development of a critical experiments training course at the facility. The training course is intended to provide hands-on experiment experience for the training of new and re-training of practicing Nuclear Criticality Safety Engineers. The current plans are for the development of the course to continue through the first part of fiscal year 2011 with the development culminating is the delivery of a prototype of the course in the latter part of the fiscal year. The course will be available in fiscal year 2012.
Designing Critical Experiments in Support of Full Burnup Credit
Burnup credit is the process of accounting for the negative reactivity due to fuel burnup and generation of parasitic absorbers over fuel assembly lifetime. For years, the fresh fuel assumption was used as a simple bound in criticality work for used fuel storage and transportation. More recently, major actinides have been included. However, even this yields a highly conservative estimate in criticality calculations. Because of the numerous economical benefits including all available negative reactivity (i.e., full burnup credit) could provide, it is advantageous to work toward full burnup credit. Unfortunately, comparatively little work has been done to include non-major actinides and other fission products (FP) in burnup credit analyses due in part to insufficient experimental data for validation of codes and nuclear data. The Burnup Credit Criticality Experiment (BUCCX) at Sandia National Laboratory was a set of experiments with 103 Rh that have relevance for burnup credit. This work uses TSUNAMI-3D to investigate and adjust a BUCCX model to match isotope-specific, energy-dependent k eff sensitivity profiles to those of a representative high-capacity cask model (GBC-32) for each FP of interest. The isotopes considered are 149 Sm, 143 Nd, 103 Rh, 133 Cs, 155 Gd, 152 Sm, 99 Tc, 145 Nd, 153 Eu, 147 Sm, 109 Ag, 95 Mo, 150 Sm, 101 Ru, and 151 Eu. The goal is to understand the biases and bias uncertainties inherent in nuclear data, and ultimately, to apply these in support of full burnup credit.
Design of Temperature Dependent Critical Experiments with SPRF/CX
This paper describes the investigation of temperature-dependent critical experiments using the Seven Percent Critical Experiments (7uPCX) and Burnup Credit Critical Experiments (BUCCX) fuel types within the Sandia Pulsed Reactor Facility/Critical Experiments (SPRF/CX) apparatus at Sandia National Laboratories (Sandia). The goal of these experiments is to test the effect of varying system temperature on the $\kappa$ eff bias of water-moderated systems. Temperatures of 5–95°C were considered in this work. Eighteen representative lattice configurations were analyzed that had variations in the number of fuel rods and water holes, as well as in the array configuration, to achieve a variety of moderation regimes. The configurations were based on those detailed in the LEU-COMP-THERM-078 and LEU- COMP-THERM-079 experiments, both of which were published in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook).
Critical Experiment Design Phase 2 Report for Integral Request 304
This report documents the second phase of the critical experiment design process (CED-2) conducted as part of integral experiment request (IER) 304. The purpose of IER-304 is to develop a temperature-dependent critical experiment capability at the Sandia National Laboratories critical experiment facility using low-enriched uranium oxide fuel. Only a few benchmark quality critical experiments are currently available to validate criticality safety computational methods at temperatures other than room temperature. Recent advancements in computational techniques such as implementation of on-the-fly Doppler broadening techniques and advanced treatment of thermal scattering data necessitate the development of additional experimental capabilities in this area. The work described in this report developed representative configurations using 7uPCX and BUCCX fuels, analyzed the physics exercised by the different arrays, and analyzed the estimated experimental uncertainties. This report also scopes the information necessary for performing modifications to the reactor to accommodate operation at elevated and reduced temperatures.
IER 441: Experiments to Measure the Effect of Tantalum on Critical Systems (SNL/ORNL) [Slides]
This presentation provides information on the experiments to measure the effect of Tantalum (Ta) on critical systems. This talk presents details on the Sandia Critical Experiments Program with the Seven Percent Critical Experiment (7uPCX) and the Burnup Credit Critical Experiment (BUCCX). The presentation highlights motivations, experiment design, and evaluations and publications.
Completion of IER 305: Molybdenum Sleeve Experiments and Preparations for Performing IER 441: Epithermal Tantalum Experiments [Slides]
This presentation includes a look into Sandia critical experiments including the 7uPCX, BUCCX, and assembly design. This presentation touches on the completion of IER 305 with CED-3b, CED-4a, and CED-4b. Finally, there are preparations to perform IER 441 including new hardware, critical configurations, and next steps.
Temperature Dependent Experiments using SPRF/CX [Slides]
A range of fuel arrays has been examined for both fuel types and representative arrays were selected. Temperature dependent calculations were performed to show the performance of the arrays. Modification to the SPRF/CX facility has been proposed to aid SNL staff in the execution of temperature dependent experiments.