Heavy Ion-Induced Single-Event Leakage Current and Burnout in Homojunction GaN PIN Diodes
Not Available
Senarath, A. S. [Interdisciplinary Materials Scien↗
SEARCH · Search NASA
Results for “BURNOUT”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
HFIR Steady State Heat Transfer Code (HSSHTC) Statistical Uncertainty Analysis
HSSHTC, the safety basis steady state TH code for HFIR, uses a highly conservative approach in which all input and calculation uncertainties are resolved simultaneously at their most limiting setting. This results in excessive conservatism which does not account for the high unlikelihood of such simultaneous worst-case conditions. The present study explores an alternative approach, BEPU, in which reasonable working assumptions for the probability distribution of each input uncertainty are used to determine a relationship between burnout power margin and core fuel failure probability. This was performed under a philosophy of perturbing uncertainty parameters already defined within the HSSHTC methodology while preserving the HSSHTC calculation approach and solution methodology itself. Based on the assumptions employed in this study, the BEPU approach resulted in a 0.29 increase in burnout power ratio (25 MW increase in burnout power) compared to the latest HSSHTC calculations of C-HFIR-2026-004. The study can be refined in the future by employing fuel fabrication data to provide more realistic input distributions. Future changes to the HSSHTC methodology would potentially allow a more comprehensive treatment of uncertainties which may further increase the burnout power ratio.
Wysocki, Aaron [ORNL] (ORCID:0000000222043779)↗
Optimization of a Secondary Air Injector for a Rich-Quench-Lean (RQL) Ammonia Combustor Using Computational Fluid Dynamics
Ammonia has emerged as a promising medium for moving hydrogen around the globe due to its energy density, existing infrastructure for production, transportation, and storage, and multiple applications from fertilizer to power generation. However, one of the most significant challenges with ammonia combustion for power generation is the formation of nitrogen oxides (NOx) during combustion. Several combustion strategies have been developed to minimize the formation of NOx. One such strategy, known as rich-quench-lean (RQL), is a method that combusts NH3 in a fuel-rich environment, followed by a quick mix section and a lean burnout section. Rapid mixing of secondary air before lean burnout is thought to be important to minimize the formation of NOx. A genetic algorithm (GA) is used to parametrically vary the secondary air injector design, including the diameter, count, and angles over a constrained design space. The designs are evaluated using a non-reacting OpenFOAM model, with the objective function being the uniformity index of the secondary air (modeled as a scalar). Optimization campaigns show that traditional correlation-based designs might not be adequate. After running 414 OpenFOAM models, the optimal design is 32, 1 mm diameter, angled air injectors, increasing the uniformity index at the outlet of the quick mix zone by 36.8%. The most promising designs will be manufactured and tested in a small RQL burner setup, which is expected to lead to validation and insight into the practical usage of NH3 combustion for power generation.
ammonia combustion↗
Proactively Addressing Employee Well-Being to Foster Workplace Safety in a U.S. National Laboratory
The daily conduct of high-risk, high-consequence work, by its very nature, can be mentally demanding. Research demonstrates that failure to manage or mitigate these demands can degrade psychological well-being and mental health. Degradations in employee well-being impact individual performance, jeopardizing safety and mission success in the workplace. This Commentary describes efforts taken at Sandia National Laboratories over the past eight years to evaluate, understand, learn from, and mitigate factors such as stress, burnout, work-life imbalances, and disengagement in the workplace that can degrade employee well-being. After evaluating these four facets of employee well-being, Sandia National Laboratories initiated several programs to address observations and outcomes, including the Thrive program, the Take 10 Initiative, work-life balance resources, employee resource groups such as the Sandia Parents Group, and Workplace Improvement Networks. Collectively, the intent of these programs is to ensure employee mental readiness to conduct hazardous high-risk work effectively and safely. Preliminary data suggest that these programs are succeeding. In conclusion, other national laboratories and organizations, regardless of size, may wish to apply similar approaches to improve employee well-being and thereby increase the likelihood of mission success.
Absorption↗
Theoretical and kinetic modeling study of hydrazine oxidation
The present work constitutes the first theoretical and kinetic modeling study of hydrazine oxidation, which may be important for burnout in ammonia-fueled combustion. The kinetics of the oxidation of N 2 H 4 , N 2 H 3 and tHNNH by molecular oxygen were investigated via a quantum chemistry/canonical transition state theory approach. Geometries and anharmonic frequencies were obtained with density functional theory, and energies from coupled cluster calculations (CCSD(T)) extrapolated to the infinite basis set limit, with corrections for core-valence electron correlation, scalar relativistic effects, and higher level correlation up to lambda coupled cluster, CCSDT(Q) Λ . The key reactions occurred on the N 2 H 4 O 2 potential energy surface, where the results indicated a fast reaction of N 2 H 3 with HO 2 via singlet adducts to yield tHNNH + H 2 O 2 and HNN(H)O + H 2 O, while reaction on the triplet surface proceeds via a bound complex followed by a tight, submerged barrier to yield N 2 H 4 + O 2 . The results were incorporated in a detailed reaction mechanism, which was used to interpret the shock tube results from Michel and Wagner (1965) on the effect of O 2 on hydrazine conversion at 1100–1400 K. The kinetic model captured qualitatively the observed behavior, but underestimated the reaction rate under oxidizing conditions. The hydrazine pyrolysis chemistry dominated conversion at reducing conditions and/or high temperature. At oxidizing conditions and intermediate temperatures (≲ 1400 K), reactions of N 2 -amines with HO 2 and O 2 were important for the oxidation rate.
Ab initio calculations↗
Laser-induced slip casting as an additive manufacturing approach for silicon carbide
Here, this work presents processing silicon carbide (SiC) with the laser-induced slip casting (LIS) additive manufacturing (AM). SiC was stabilized in water with polyethyleneimine (PEI) dispersant, and SiC slurries were made with rheology for LIS printing. High-density ceramic parts were printed, followed by single-step binder burnout and sintering. The printed parts achieved 93–95 % of theoretical density. X-ray computed tomography (XCT) revealed a small distribution of flaws exceeding 100 microns. The mechanical properties were measured in both parallel and perpendicular to the printing layers, and the orientation with layers perpendicular to the bending moment resulted in higher strength compared to the parallel direction. Porosity resulting from processing and large inclusions of boron carbide (B4C) were the root cause of failure in the measured samples. Despite these defects through this effort, this new approach demonstrates promise for green forming of SiC with densities greater than 95 % theoretical and tensile strengths above 250 MPa.
Additive Manufacturing↗
UHT-CAMANCHE: Ultra-High Temperature Ceramic Additively Manufactured Compact Heat Exchangers
The conceptual basis for this project is the convergence of advanced ultra-high temperature ceramic materials and additive manufacturing technologies to produce compact ceramic heat exchangers with complex internal flow path geometries. Task areas were broadly divided into materials and manufacturing development, heat exchanger design, component testing, and techno-economic analysis. Technical challenges included the design and commissioning of new test facilities, improving feature resolution and deposition rate of ceramic additive manufacturing techniques, establishing process-structure-property relationships in additively manufactured ultra-high temperature ceramics, and assessing high temperature materials compatibility in CO 2 environments. The primary candidate material evaluated in this work is a composite comprising zirconium diboride (ZrB2) with 30 vol. % silicon carbide (SiC) which was selected based on its desirable combination of high temperature mechanical properties, high thermal and electrical conductivities, and oxidation resistance. High solids loaded ZrB2-SiC pastes suitable for extrusion-based additive manufacturing were developed for the first time as part of this work. Materials compatibility studies indicate this material oxidizes in CO 2 to form a protective borosilicate scale which transforms to pure silica above 1000°C. Parts made by additive manufacturing displayed enlarged grain sizes produced by pressureless sintering as compared to hot-press sintering. Increases in microstructural coarseness have outsized effect on oxidation performance up to 1400°C due to incomplete oxidation of coarse large diameter SiC particles resulting in lower amounts of silica that apparently inhibit protective scale formation. Additive manufacturing as a forming technique did not appear to significantly affect thermal conductivity, hardness, or elastic modulus, though flexural strength was reduced by half or more as compared to traditionally hot-pressed materials. This effect was attributed to the presence of strength-limiting flaws (ca. 40 microns in size) originating from extrudate inhomogeneities that could potentially be eliminated with further process improvements. Attempts to attain economies of scale for production of multi-kilowatt scale heat exchangers by ceramic additive manufacturing proved difficult. Lack of automation and a modest extrusion rate while retaining fine feature resolution made the overall process labor intensive and limited experimental throughput. A number of full-scale components were taken through post-process heat treatments including drying, binder burnout, and sintering; however, none survived without significant flaws or cracks. Therefore, no operational data from a newly installed heat exchanger test loop were able to be obtained during the performance period. Continued research and development is recommended to improve economic feasibility of ceramic additive manufacturing by standardizing the use of advanced sensors, artificial intelligence, and automation tools to reduce associated labor costs and accelerate production rates. The materials and manufacturing techniques demonstrated in this work are likely to find applications in defense and energy applications.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Direct Ink Write and Processing of Complex 3D Marine Compatible Structures with Calcium Carbonate Slurries
Ocean acidification heavily impacts marine ecosystems by reducing calcification. Many coral-algae symbiotic relationships are in jeopardy due to the destruction of coral reefs. Here, a ceramic ink compatible with the direct ink write additive manufacturing technique was formulated and used to print marine compatible structures that could grow algae and restore that relationship. A diacrylate polymer was mixed with calcium carbonate, a material that comprises a coral skeleton, to create a slurry with shear thinning properties. Rheology studies were conducted to confirm printing properties and characterize the slurry. Printed parts demonstrated strong control over print features, including size and infill design. Various infill patterns and percentages were attempted to optimize printability and potential algae growth. Thermogravimetric analysis helped determine a logical burnout and sintering procedure to avoid large cracking. This project developed a printable and sinter-able calcium carbonate ceramic slurry for complex marine-compatible structures and algae growth. This research was conducted in the support of the Eco Reef project.
36 MATERIALS SCIENCE↗
Quench Propagation On Rare-Earth Barium Copper Oxide (REBCO) Tape
Rare-earth barium copper oxide (REBCO) high-temperature superconductors can carry high currents with zero electrical resistance, enabling applications in high-field magnets, energy systems, and fusion devices. However, localized losses of superconductivity, known as quenches, pose a severe risk due to REBCO’s mechanical brittleness and slow quench propagation, complicating early detection. This work investigates quench propagation and thermal response through controlled experiments. A segmented REBCO tape soldered onto a printed circuit board (PCB) with multiple voltage taps and temperature sensors was submerged in liquid nitrogen at 77 K. In the first test, current ramping produced a quench near 360 A, consistent with theoretical current limits, but resulted in local burnout. In the second test, a heater-induced quench at 300 A propagated bidirectionally with velocities ranging from 164–226 mm/s. These results provide critical parameters for improving REBCO quench detection and protection system design while accounting for REBCO’s limited bendability.
Ju, Han [Northern Illinois U.]↗
Nuclear Safety [Vol. 16, No. 1, January-February 1975]
Nuclear Safety covers significant developments in the field of nuclear safety. The scope is limited to topics relevant to the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, safety considerations in regard to the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 AEC Working Paper on Population Density Around Nuclear Power-Plant Sites Adapted by J. Ft. Buchanan, 8 Water-Reactor Safety-Research Information Meeting by Wm. B. Cottrell, D. O. Hobson, and G. D. Whitman; ACCIDENT ANALYSIS: 29 Burnout in Boiling Heat Transfer. Part I: Pool-Boiling Systems by A. E. Bergles; PLANT SAFETY FEATURES: 43 Radionuclide Behavior During Normal Operation of Liquid-Metal-Cooled Fast Breeder Reactors. Part 1: Production by C. A. Erdman and A. B. Reynolds; CONSEQUENCES OF EFFLUENT RELEASE: 60 The Control, Monitoring, and Reporting of Radioactivity in Effluents. Part 1: AEC-Owned Facilities by M. B. Biles and F. E. Coffman, 71 The Control, Monitoring, and Reporting of Radioactivity in Effluents. Part 2: AEC-Licensed Facilities by L. B. Higginbotham and J. T. Collins; OPERATING EXPERIENCES: 76 Incident at the Lucens Reactor by J. M. Miller, 79 IAEA Symposium on Experience from Operating and Fueling of Nuclear Power Reactors by William A. Pryor, 87 Recent Occurrences at Nuclear Reactors and Their Causes Compiled by William R. Casto, 98 Summary of Operating U. S. Power Reactors as of Nov. 1. 1974, 101 Selected Safety-Related Occurrences Reported in September and October 1974 Compiled by William R. Casto; CURRENT EVENTS: 104 General Administrative Activities Compiled by Wm. B. Cottrell, 110 Action on Power-Reactor Projects Undergoing Regulatory Review or Consideration Compiled by Wm. B. Cottrell, 119 Action on Nonreactor Projects Undergoing Regulatory Review or Consideration Compiled by Wm. B. Cottrell, 121 Proposed Rule Changes as of Oct. 31, 1974; MISCELLANY: 97 ASTM—Euratom Symposium on Radiation Dosimetry: Developments and Standardization (Announcement), 118 Workshops on In-Pile Filter Testing (Announcement), 119 IAEA Symposium on Radiological Impacts from Releases from Nuclear Facilities into Aquatic Environments (Announcement).
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Reducing NOx Emissions in Ammonia Combustors
Ammonia continues to attract growing interest as a carbonneutral replacement fuel, motivating numerous research efforts toward understanding fundamental ammonia combustion characteristics. A major challenge for the use of ammonia is the development of combustor technologies for mitigating potentially high NOx emissions from the fuel-bound nitrogen chemical pathways to acceptable levels. Our work focuses on a staged RQL combustor architecture for minimizing the NOx emission levels through burning fuel-rich in the primary stage to formcombustion products containing significant levels of hydrogen in addition to nitrogen and water with minimal NOx formation. The subsequent quench and burnout stages of the combustor must then quickly burn residual hydrogen with flame-temperatures moderated by nitrogen and water forming in the first stage. Chemical Reactor Network modeling was used to understand and identify optimal stoichiometry and residence times in each stage for minimizing NOx emissions and to quantify pressure and temperature effects. Reducing the overall NOx emissions requires relatively long residence times in the primary stage to achieve near equilibrium NO levels due to kinetically controlling processes. For conditions relevant to gas turbines (e.g., 30 atm), our work indicates that NOx emissions below 20 ppm are theoretically achievable in a staged RQL combustor architecture. However, these emission predictions significantly depend on the accuracies of currently available chemical kinetic mechanisms which have not been extensively validated under elevated pressure and temperature conditions relevant to gas turbines.
10 SYNTHETIC FUELS↗