Search NASA⌕ Search

SEARCH · Search NASA

Results for “BUTANE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Ignition properties of n-butane and iso-butane in a rapid compression machine

Autoignition delay times of n-butane and iso-butane have been measured in a Rapid Compression Machine in the temperature range 660-1010 K, at pressures varying from 14 to 36 bar and at equivalence ratios {phi} = 1.0 and {phi} = 0.5. Both butane isomers exhibit a negative-temperature-coefficient (NTC) region and, at low temperatures, two-stage ignition. At temperatures below {proportional_to}900 K, the delay times for iso-butane are longer than those for the normal isomer, while above this temperature both butanes give essentially the same results. At temperatures above {proportional_to}720 K the delay times of the lean mixtures are twice those for stoichiometric compositions; at T < 720 K, the equivalence ratio is seen to have little influence on the ignition behavior. Increasing the pressure from 15 bar to 30 bar decreases the amplitude of the NTC region, and reduces the ignition delay time for both isomers by roughly a factor of 3. In the region in which two-stage ignition is observed, 680-825 K, the duration of the first ignition stage decreases sharply in the range 680-770 K, but is essentially flat above 770 K. Good quantitative agreement is found between the measurements and calculations for n-butane using a comprehensive model for butane ignition, including both delay times in the two-stage region, with substantial differences being observed for iso-butane, particularly in the NTC region. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intramolecular 13 C isotope distributions of butane from natural gases

A single-step method allowing the measurement of 13 C intramolecular distribution of butane isomers (n- and i-butane) from natural gas samples was developed. The method builds up on the one that has been developed for propane, using on-line pyrolysis followed by isotope analysis of the pyrolytic fragments. The isotopic filiation between n-butane and its pyrolytic fragments was elucidated using samples spiked with 13 C on terminal positions. The isotopic filiation for i-butane could not be shown experimentally due to the lack of commercially available enriched i-butane. We thus used a recent model named Reaction Mechanism Generator (RMG) to assess the origin of the fragments arising from i-butane pyrolysis. Butanes from natural gas samples from the Carnarvon Basin (Australia) and the Arkoma Basin (USA) were analyzed. The results are consistent with a model for thermogenic natural gas generation and suggest that combined intramolecular isotope composition of propane and n-butane can be related to the gas maturity. In addition, the method allows the detection and shed light on the mechanism of n-butane and i-butane biodegradation in natural gas reservoirs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation of butanal over silica-supported Shvo’s catalyst and its use for the gas-phase conversion of propene to butanol via tandem hydroformylation and hydrogenation

The objective of the present study was to develop a heterogeneous catalyst for the hydrogenation of butanal that could function in the presence of CO and propene and, hence, could be used in a tandem reactor to enable the gas-phase conversion of propene and synthesis gas to butanol. To this end, we investigated the activity of silica-supported Shvo's catalyst (Shvo/SiO 2 ) for the gas-phase hydrogenation of butanal. Experiments were performed to determine the kinetics of n- and iso-butanal hydrogenation. The apparent activation energies and the apparent partial pressure dependencies of n - and iso-butanal, H 2 , and CO on the rates of n- and iso-butanol formation were determined. A mechanism for butanal hydrogenation was proposed to rationalize the observed kinetics and some of the reaction intermediates were observed by in situ infrared and 31 P MAS NMR spectroscopy. It was found that Shvo/SiO 2 was inhibited by SX (SX = sulfoxanthphos) and CO, and is inactive for alkene hydrogenation. The tandem catalytic conversion of propene and synthesis gas to butanol was then carried out using a SX-Rh supported ionic liquid phase (SILP) catalyst to promote the hydroformylation of propene to butanal and Shvo/SiO 2 to promote the hydrogenation of butanal to butanol. The rate expressions describing the kinetics of each of the catalysts were then used to predict operating conditions required to achieve high conversion of propene to butanol. Under the most favorable conditions examined (H 2 /CO = 10), an overall yield of 13% to butanol was achieved with 15% propene conversion and 90% aldehyde conversion at a temperature of 413 K.

Butanal↗

n-Butane dehydrogenation over Pt/Mg(In)(Al)O

The thermal dehydrogenation of butane to butene and hydrogen was explored over Pt nanoparticles supported on calcined hydrotalcite containing indium, Mg(In)(Al)O. Previous work has shown that upon reduction in H 2 at temperatures above 673 K, bimetallic Pt-In particles of are formed, as evidenced by XANES and EXAFS. The performance of Pt/Mg(In)(Al)O for butane dehydrogenation was found to be highly dependent on the bulk In/Pt ratio. The optimal ratio was found to be between 0.33 and 0.88, yielding >95% selectivity to butenes. Hydrogen co-fed with butane was shown to suppress coke formation and catalyst deactivation, a ratio of H 2 /C 4 H 10 = 2.5 providing the best catalytic performance. Regeneration of catalysts after removal of accumulated carbon and reduction in H 2 restored the original catalyst activity and selectivity. Butane dehydrogenation above 803 K resulted in higher formation of butadiene, a known precursor to coke. No evidence for butane cracking was found to occur on Pt/Mg(In)(Al)O due to moderately basic nature of the support. This study shows that Pt/Mg(In)(Al)O exhibits superior performance for butane dehydrogenation compared to supported Pt catalysts promoted with Sn, Ge, Pb, and In prepared by successive incipient wetness impregnation of the Pt and promoter precursors.

Butane dehydrogenation↗