SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1975

A combined representation method for use in band structure calculations. 1: Method

A representation was described whose basis levels combine the important physical aspects of a finite set of plane waves with those of a set of Bloch tight-binding levels. The chosen combination has a particularly simple dependence on the wave vector within the Brillouin Zone, and its use in reducing the standard one-electron band structure problem to the usual secular equation has the advantage that the lattice sums involved in the calculation of the matrix elements are actually independent of the wave vector. For systems with complicated crystal structures, for which the Korringa-Kohn-Rostoker (KKR), Augmented-Plane Wave (APW) and Orthogonalized-Plane Wave (OPW) methods are difficult to apply, the present method leads to results with satisfactory accuracy and convergence.

Friedli, C.↗

NASA NTRS1997

Electronic Structure of TlBa2CaCu2O(7-Delta)

The core levels of TlBa2CaCu2O(7-delta) (Tl-1212) epitaxial films have been measured with X-ray photoelectron spectroscopy (XPS). The valence electronic structure has been determined using the full-potential linear muffin-tin-orbital band-structure method and measured with XPS. The calculations show that a van Hove singularity (VHS) lies above the Fermi level (E(sub F)) for the stoichiometric compound (delta = 0.5), while for 50% oxygen vacancies in the Tl-O layer (delta = 0.5) E(sub F) is in close proximity to the VHS. Samples annealed in nitrogen (to reduce the hole overdoping by the removal of oxygen) exhibit higher core-level binding energies and a higher T(sub c), consistent with a shift of E(sub F) closer to the VHS. Comparisons are made to the core levels and valence bands of Tl2Ba2CaCu2O(8 + delta)(Tl-2212) and HgBa2CaCu2O)6 + delta) (Hg- 1212). The similarity of the Cu 2p(sub 3/2) spectra for Tl-1212 and Tl-2212 indicates that the number of Tl-O layers has little effect on the Cu-O bonding. However, the Tl-1212 and Hg-1212 Cu 2p(sub 3/2) signals exhibit differences which suggest that the replacement of T(sup 3+) with Hg(sup 2+) results in a decrease in the O 2p right arrow Cu 3d charge-transfer energy and differences in the probabilities of planar vs apical oxygen charge transfer and/or Zhang-Rice singlet-state formation. Differences between the Tl-1212 and the Tl-2212 and Hg-1212 measured valence bands are consistent with the calculated Cu 3d and (Tl,Hg) 6s/5d partial densities of states.

Vasquez, R. P.↗

NASA NTRS1992

Electronic and total energy properties of ternary and quaternary semiconductor compounds, alloys, and superlattices: Theoretical study of Cu/graphite bonding

The goals of the research were to provide a fundamental science basis for why the bonding of Cu to graphite is weak, to critically evaluate the previous analysis of the wetting studies with particular regard to the values used for the surface energies of Cu and graphite, and to make recommendations for future experiments or other studies which could advance the understanding and solution of this technological problem. First principles electronic structure calculations were used to study the problem. These are based on density functional theory in the local density approximation and the use of the linear muffin-tin orbital band structure method. Calculations were performed for graphite monolayers, single crystal graphite with the hexagonal AB stacking, bulk Cu, Cu(111) surface, and Cu/graphite superlattices. The study is limited to the basal plane of graphite because this is the graphite plane exposed to Cu and graphite surface energies and combined with the measured contact angles to evaluate the experimental adhesion energy.

Lambrecht, Walter R. L.↗

NASA NTRS1996

Electronic Structure of TIBa(sub 2)CaCu(sub 2)O(sub 7-delta)

The core levels of TIBa(sub 2)CaCu(sub 2)O(sub 7-delta) epitaxial films have been measured with x-ray photoelectron spectroscopy (XPS). The valence electronic structure has been determined using the full-potential linear muffin tin orbital band structure method and measured with XPS.

Epitaxial films van Hove Fermi level↗

DOE OSTI2023

Topological Exact Flat Bands in Two-Dimensional Materials under Periodic Strain

Here we study flat bands and their topology in 2D materials with quadratic band crossing points under periodic strain. In contrast to Dirac points in graphene, where strain acts as a vector potential, strain for quadratic band crossing points serves as a director potential with angular momentum . We prove that when the strengths of the strain fields hit certain “magic” values, exact flat bands with emerge at charge neutrality point in the chiral limit, in strong analogy to magic angle twisted-bilayer graphene. These flat bands have ideal quantum geometry for the realization of fractional Chern insulators, and they are always fragile topological. The number of flat bands can be doubled for certain point group, and the interacting Hamiltonian is exactly solvable at integer fillings. We further demonstrate the stability of these flat bands against deviations from the chiral limit, and discuss possible realization in 2D materials.

36 MATERIALS SCIENCE↗

NASA NTRS1981

Accelerated convergence of structured banded systems using constrained corrections

An efficient iterative method for solving a structured banded system of equations is described. The method was developed for a full potential flow program and uses a basic interation step, a dynamic relation step, and a multigrid concept of constraining iterative corrections. The solution of a large linear system of equations is examined. Efficient iterative methods have become attractive for large problems. In the nonlinear cases, these iterations may be effectively merged to improve convergence rates.

Kneile, K.↗

DOE OSTI2023

Composite Fermi Liquid at Zero Magnetic Field in Twisted MoTe 2

Here, the pursuit of exotic phases of matter outside of the extreme conditions of a quantizing magnetic field is a long-standing quest of solid state physics. Recent experiments have observed spontaneous valley polarization and fractional Chern insulators in zero magnetic field in twisted bilayers of MoTe 2 , at partial filling of the topological valence band (ν =-2/3 and -3/5). We study the topological valence band at half filling, using exact diagonalization and density matrix renormalization group calculations. We discover a composite Fermi liquid (CFL) phase even at zero magnetic field that covers a large portion of the phase diagram near twist angle ~3.6°. The CFL is a non-Fermi liquid phase with metallic behavior despite the absence of Landau quasiparticles. We discuss experimental implications including the competition between the CFL and a Fermi liquid, which can be tuned with a displacement field. The topological valence band has excellent quantum geometry over a wide range of twist angles and a small bandwidth that is, remarkably, reduced by interactions. These key properties stabilize the exotic zero field quantum Hall phases. Finally, we present an optical signature involving “extinguished” optical responses that detects Chern bands with ideal quantum geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1977

Band structure of W and Mo by empirical pseudopotential method

The empirical pseudopotential method (EPM) is used to calculate the band structure of tungsten and molybdenum. Agreement between the calculated reflectivity, density of states, density of states at the Fermi surface and location of the Fermi surface from this study and experimental measurements and previous calculations is good. Also the charge distribution shows the proper topological distribution of charge for a bcc crystal.

Sridhar, C. G.↗

DOE OSTI2024

Three-dimensional higher-order saddle-point-induced flatbands in Co-based kagome metals

The saddle point (Van Hove singularity) exhibits a divergent density of states in two-dimensional systems, leading to fascinating phenomena such as strong correlations and unconventional superconductivity, yet it is seldom observed in three-dimensional (3D) systems. In this work we find two types of 3D higher-order saddle points (HOSPs) in emerging 3D kagome metals YbCo 6⁢ Ge 6 and MgCo 6 ⁢Ge 6 . Both HOSPs exhibit a singularity in their density of states, which is significantly enhanced compared to the ordinary saddle point. The HOSP near the Fermi energy generates a flatband extending a large area in the Brillouin zone, potentially amplifying the correlation effect and fostering electronic instabilities. Two types of HOSPs exhibit distinct robustness upon element substitution and lattice distortions in these kagome compounds. Our work paves the way for engineering exotic band structures, such as saddle points and flatbands, and exploring interesting phenomena in Co-based kagome materials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Relationship between atomic and electronic structure in Ln-bearing oxides

Metastable states of matter are of great interest as they offer the promise of novel functionality. They are often a natural consequence of exposure to nonequilibrium environments. In oxides, metastability can take the form of new polymorphs, chemical disorder, and even amorphization. While significant attention has been given to the impact those changes have on the atomic properties of the material, the corresponding changes in the electronic structure have received less attention. Here, using density functional theory, we consider how the electronic structure varies with potential metastable structures in two classes of lanthanide-bearing oxides—pyrochlores and interlanthanide sesquioxides. We find that the changes depend strongly on both the crystal structure and crystal chemistry of the compound with, for example, disordering and amorphization either increasing or decreasing the bandgap depending on the chemistry. For the 𝐴 2 ⁢𝐵 2 ⁢O 7 pyrochlores, we find different dependencies of the bandgap on the 𝐴 = 𝐿⁢𝑛 cations as the 𝐵 cation is changed, which we relate to the nature of the density of states at the conduction band minimum for different 𝐵 chemistries. Our calculations are validated by electron energy loss spectroscopy measurements for two pyrochlore compounds in which amorphization does reduce the bandgap, consistent with our calculations on these two compounds. In conclusion, our results highlight the relationship between atomic and electronic structure and how radiation can be used to modify and potentially control the electronic properties of oxides.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Spectral-partitioned Kohn-Sham density functional theory

Here we introduce a general, variational scheme for systematic approximation of a given Kohn-Sham free-energy functional by partitioning the density matrix into distinct spectral domains, each of which may be spanned by an independent diagonal representation without requirement of mutual orthogonality. It is shown that by generalizing the entropic contribution to the free energy to allow for independent representations in each spectral domain, the free energy becomes an upper bound to the exact (unpartitioned) Kohn-Sham free energy, attaining this limit as the representations approach Kohn-Sham eigenfunctions. A numerical procedure is devised for calculation of the generalized entropy associated with spectral partitioning of the density matrix. The result is a powerful framework for Kohn-Sham calculations of systems whose occupied subspaces span multiple energy regimes. As a case in point, we apply the proposed framework to warm- and hot-dense matter described by finite-temperature density functional theory, where at high energies the density matrix is represented by that of the free-electron gas, while at low energies it is variationally optimized. We derive expressions for the spectral-partitioned Kohn-Sham Hamiltonian, atomic forces, and macroscopic stresses within the projector-augmented wave (PAW) and the norm-conserving pseudopotential methods. It is demonstrated that at high temperatures, spectral partitioning facilitates accurate calculations at dramatically reduced computational cost. Moreover, as temperature is increased, fewer exact Kohn-Sham states are required for a given accuracy, leading to further reductions in computational cost. Finally, it is shown that standard multiprojector expansions of electronic orbitals within atomic spheres in the PAW method lack sufficient completeness at high temperatures. Spectral partitioning provides a systematic solution for this fundamental problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Targeted Dy intercalation under graphene/SiC for tuning its electronic band structure

Metal intercalation of graphene is a promising method to tune its electronic band structure and generate novel electronic and topological phases. The tuning depends critically on the ability to bond the intercalated atoms at predesigned, subsurface interlayer locations because the emerging band structure depends on metal location. In this work, we have studied Dy intercalation under single-layer graphene (SLG) on SiC using spot profile analysis–low-energy electron diffraction and scanning tunneling microscopy (STM). The experimental work is complemented with density-functional theory (DFT) analysis. Because different diffraction spots originate from different subsurface interlayer regions, it is possible to identify changes in the intercalation location by monitoring the spot intensity as a function of growth conditions. DFT calculations of the chemical potential as a function of intercalated Dy coverage support the variation of the stability of the intercalated phase at different intercalated locations. The preferred location is confirmed from STM studies showing the removal of the 6 × 6 moiré corrugation at the preferred location, observed at higher Dy coverage.

2-dimensional systems↗

DOE OSTI2025

𝐴𝑏 initio density-matrix approach to exciton coherence: Phonon scattering, Coulomb interactions, and radiative recombination

Relaxation processes following light excitation in semiconductors are key in materials-based quantum technology applications. These processes are broadly studied in atomically thin transition-metal dichalcogenides, quasi-two-dimensional excitonic semiconductors in which atomistic design allows for tunable excited-state properties, such as relaxation lifetimes and photoinduced coherence. In this work, we present a density-matrix-based approach to compute exciton relaxation within a many-body ab initio perspective. We expand our previously developed Lindblad density-matrix formalism to capture multichannel electron-hole pair relaxation processes, including phonon and Coulomb scattering as well as radiative recombination, and we study their effect on the time-resolved excited-state propagation. Using monolayer MoSe 2 as a prototypical example, we examine many-body effects on the time-dependent dynamics of photoactive excitations, exploring how the electron-hole pair interactions are reflected in variations of the excitation energy, spectral signature, and state coherence. In conclusion, our method supplies a detailed understanding of exciton relaxation mechanisms in realistic materials, offering a previously unexplored pathway to study excited-state dynamics in semiconductors from first principles.

Band structure methods↗

DOE OSTI2024

Charge self-consistent density functional theory plus ghost rotationally invariant slave-boson theory for correlated materials

We present a charge self-consistent density functional theory combined with the ghost rotationally invariant slave-boson (DFT+gRISB) formalism for studying correlated materials. Here, this method is applied to SrVO 3 and NiO, representing prototypical correlated metals and charge-transfer insulators. For SrVO 3 , we demonstrate that DFT+gRISB yields an accurate equilibrium volume and effective mass close to experimentally observed values. Regarding NiO, DFT+gRISB enables the simultaneous description of charge-transfer and Mott-Hubbard bands, significantly enhancing the accuracy of the original DFT+RISB approach. Furthermore, the calculated equilibrium volume and spectral function reasonably agree with experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Charge correlations and magnetoelastic coupling in intercalated transition metal dichalcogenides

The large van der Waals gap in transition metal dichalcogenides (TMDs) offers an avenue to tune the ground state of 2D materials through the intercalation of magnetic atoms. Here, we investigate the charge correlations in Fe 1/3 ⁢TaS 2 , Co 1/3 ⁢TaS 2 , and Fe 0.35 ⁢NbS 2 by combining angle-resolved photoemission spectroscopy (ARPES), x-ray scattering, magnetometry, and density functional theory (DFT). We find that, while short-range charge fluctuations develop in Ta-based compounds, Fe 0.35 ⁢NbS 2 exhibits long-range charge order which is strongly coupled with magnetic order and tunable by external magnetic field. Our electronic structure analysis reveals that intercalation reconstructs the Fermi surface via charge transfer and band renormalization, yet does not generate the nesting conditions compatible with the observed ordering vectors. Complementary phonon calculations further exclude a conventional electron-phonon origin of charge order. Together, these results establish magnetoelastic coupling as the dominant mechanism behind charge ordering in Fe 0.35 ⁢NbS 2 and highlight the contrasting role of Nb and Ta hosts in stabilizing correlated ground states in intercalated TMDs.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Network model for periodically strained graphene

The long-wavelength physics of monolayer graphene in the presence of periodic strain fields has a natural chiral scattering network description. When the strain field varies slowly compared to the graphene lattice and the effective magnetic length of the induced valley pseudomagnetic field, the low-energy physics can be understood in terms of valley-polarized percolating domain-wall modes. Inspired by a recent experiment, we consider a strain field with threefold rotation and mirror symmetries but without twofold rotation symmetry, resulting in a system with the connectivity of the oriented kagome network. Scattering processes in this network are captured by a symmetry-constrained phenomenological S matrix. Here, we analyze the phase diagram of the kagome network and show that the bulk physics of the strained graphene can be qualitatively captured by the network when we account for a percolation transition at charge neutrality. We also discuss the limitations of this approach to properly account for boundary physics.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Tuning superconductivity and spin-vortex instabilities in CaKFe 4 As 4 through in-plane antisymmetric strains

Lattice strains of appropriate symmetry have served as an excellent tool to explore the interaction of superconductivity in the iron-based superconductors with orthorhombic-nematic and stripe spin-density-wave (SSDW) order. In this Letter, we contribute to a broader understanding of the coupling of strain to superconductivity and competing normal-state orders by studying CaKFe 4 As 4 under large, in-plane strains of B 1 g and B 2 g symmetry. In contrast to the majority of iron-based superconductors, pure CaKFe 4 As 4 exhibits superconductivity with a relatively high transition temperature of T c ∼ 35 K in proximity of a noncollinear, tetragonal, hedgehog spin-vortex crystal (SVC) order. Through experiments and calculations, we demonstrate an anisotropic in-plane strain response of T c and the favored SVC configuration in CaKFe 4 As 4 . This supports a scenario, in which the change in spin fluctuations dominates the strain response of superconducting T c . Overall, by suggesting moderate B 2 g strains as an effective parameter to change the stability of SVC and SSDW, we outline a pathway to a unified phase diagram of iron-based superconductivity. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Resonant inelastic x-ray scattering in the topological semimetal FeSi

The energy spectrum of topological semimetals contains protected degeneracies in reciprocal space that correspond to Weyl, Dirac, or multifold fermionic states. To exploit the unconventional properties of these states, one has to access the electronic structure of the three-dimensional bulk. In this paper, we present a joint theory-experiment study of the electronic structure of a candidate topological semimetal with resonant inelastic x-ray scattering (RIXS). We resolve the bulk electronic states of FeSi using momentum-dependent RIXS at the Fe L 3 edge. We observe a broad excitation continuum devoid of sharp features, consistent with particle-hole scattering in an underlying electronic band structure. Using density functional theory (DFT), we calculate the electronic structure of FeSi and derive a band theory formulation of RIXS in the fast collision approximation to model the scattering process with zero adjustable parameters. While band theory predicts an excitation continuum with broad spectral features similar to the observed ones, discrepancies between theory and experiment suggest the presence of low-energy processes that DFT alone does not account for. Further, this study of RIXS in a topological semimetal shows that RIXS is a useful tool for revealing unanticipated behavior of bulk electronic states in this class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗