Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biocrude production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Pilot-Scale Continuous Plug-Flow Hydrothermal Liquefaction of Food Waste for Biocrude Production

Pilot-scale hydrothermal liquefaction (HTL) of biowaste is a critical step toward commercialization of the HTL technology. Despite many HTL studies conducted with wet biomass, including food waste, few were performed with a pilot-scale continuous plug-flow reactor (PFR), with the biocrude yield and quality analysis based on dewatering (ASTM D2892 Annex X1). This paper describes the development and performance evaluation of a mobile pilot-scale HTL continuous PFR, with a processing capacity of 60 L/h of wet feedstock and 6 L/h of biocrude production. The reactor system was designed for reaction conditions of up to 325 °C and 17.25 MPa. The reactor has a volume of 28.88 L with an additional counterflow heat exchanger volume of 18.07 L. Two types of food wastes, from a food processing plant and grocery store, were processed at 280 °C for 30 min, producing biocrude oil yields of 52.19 and 47.06 wt %, energy recoveries of 68.17 and 70.77%, and carbon recoveries of 66.91 and 64.78%, respectively. Furthermore, due to its high feedstock capacity and reaction volume, large amounts of biocrude oil and post-HTL wastewater (PHW) were obtained from this pilot-scale reactor to allow downstream research on upgrading biocrude oil for transportation fuel as well as PHW treatment and nutrient recovery.

09 BIOMASS FUELS↗
DOE OSTI2025

Valorizing Hydrothermal liquefaction aqueous phase via nanofiltration: Enhancing biocrude production from algal biomass

The hydrothermal liquefaction aqueous phase (HTL-AP), a nutrient- and carbon-rich waste byproduct of the HTL process, can be recirculated to enhance biocrude production efficiency. To avoid dilution of the HTL feedstock and reduced fuel quality associated with recirculating untreated HTL-AP, this study investigated nanofiltration to concentrate organic compounds and separate nutrients from HTL-AP of three algal biomass sources: an algal wastewater treatment system and two from harmful algal blooms in lakes. Up to 99% of the organics were recovered in the concentrated HTL-AP (retentate), and significant increases in both permeate flux and permeation of nitrogenous compounds were achieved by increasing HTL-AP temperature to 45 °C and pH to 11. Recirculating the concentrated HTL-AP increased biocrude yield by 70%-116% and reduced biocrude nitrogen content by up to 12%. The carbon and energy capture in the biocrude also increased by 66% and 68%, respectively.

09 BIOMASS FUELS↗
DOE OSTI2020

Production of Biocrude in an Advanced Photobioreactor-Based Biorefinery

Algenol Biotech, the National Renewable Energy Laboratory (NREL), Georgia Institute of Technology, Arizona State University, and Reliance Industries formed a team to advance the state of the art in algal biomass production and downstream processing technologies, with the end goal of a sustainable, economically viable biofuel intermediate (BFI, biocrude) product. The project included examination of high value co-product production as a market entry strategy and for enhancing the economics of a biorefinery for BFI production. The project targeted innovations in biology, operations, and engineering. The goals of the project were: BFI productivity greater than 4,000 gal-BFI/acre-yr on an annualized basis; energy efficient innovations in downstream operations resulting in an energy expenditure less than 10% of the BFI energy content and a carbon footprint reduction of more than 60% compared to fossil alternatives; and a comprehensive Techno-Economic Analysis (TEA) that identifies limiting factors for commercial viability of a photobioreactor (PBR)-based biofuel product. The project achieved the overall objectives. Strain development efforts led to the identification of a strain (Cyanobacterium sp. AB1166) that, relative to the previous best strain (Cyanobacterium sp. AB1), exhibited a ~10% increase in productivity under commercially-relevant cultivation conditions and also resulted in cultures with a >50% reduction in viscosity such that harvesting efficiency was improved; these results represent achievement of key project milestones. Progress was also made at NREL in altering the biochemical composition of algal biomass to improve the yield of BFI produced via HTL. These strain enhancements coupled with improved outdoor cultivation practices, including semi-continuous operation, increased areal biomass productivity by nearly 80% over the established baseline productivity. The annualized productivity achieved (26.8 g/m2-d), paired with HTL conversion yields realized at NREL and RIL (38% ± 2% BFI), translates to 4,100 gal-BFI/acre-yr, exceeding the FY20 BETO goal of 3,700 gal-BFI/acre-yr. Significant progress was also demonstrated in large scale PBR-based production system design, operability, and cost reduction. A 24,000-L production module comprised of 240 interlinked PBRs was constructed and successfully operated outdoors for over one year in Fort Myers, Florida. Aided by a state-of-the-art productivity model, the productivities achieved convincingly demonstrated scalability of laboratory results determined at the mL to L scale to large-scale outdoor operations exceeding 20,000 L. The system was used to cultivate Arthrospira platensis (Spirulina), an industrially-relevant cyanobacterium and source for phycocyanin, an approved blue food colorant that Algenol is developing as a risk reduction strategy for future biofuel projects and as a potential business opportunity. A key project milestone to develop phycocyanin extraction and purification technologies was achieved ahead of schedule, and product samples received positive feedback from potential customers. The production and downstream operations data generated in this project were used to conduct and refine Techno-Economic and Life Cycle Assessments to provide research guidance for reducing the costs and environmental footprint of algal biofuel and co-product manufacturing plants. Several CO 2 supply scenarios for an algal biorefinery were identified as being capable of providing a large (>60%) reduction in carbon footprint in comparison to gasoline. The TEA assessments incorporated detailed comparisons of PBR versus open pond production systems, yielding a 3-fold higher areal productivity for PBRs and suggesting overall production cost parity for the two systems. The progress in this ABY2 project addressed many of the the barriers identified for the Advanced Algal Systems R&D Program and are directly relevant to achieving the established BETO goals associated with large scale biofuel production and cost reduction.

09 BIOMASS FUELS↗
DOE OSTI2025

Hydrothermal Liquefaction of Structurally Diverse Lignins: Insights into Biocrude Yield, Fuel Properties, and Reaction Mechanisms

Lignin holds significant promise as a feedstock for biocrude production via hydrothermal liquefaction (HTL). Although lignin HTL has been widely studied, the specific depolymerization pathways associated with distinct lignin structures remain largely unexplored. This study investigates the HTL of four structurally diverse lignins: alkaline (AL), dealkaline (DAL), organosolv (OL), and lignosulfonate (LS) across 270–310 °C to elucidate structure-specific mechanisms governing biocrude yield and composition. AL and OL achieved the highest yields (16.8 ± 0.3% and 16.8 ± 2.5%), with AL-derived biocrude showing the highest carbon content (70.2 ± 0.0%) and HHV (31.0 ± 0.2 MJ/kg). In contrast, DAL and LS produced lower yields and inferior fuel quality due to higher sulfur content and lower carbon enrichment. The structures of AL and DAL, containing fewer methoxy groups, produced guaiacol-rich biocrudes (46.6% and 69.5%). Methylation in AL formed alkyl guaiacols and veratroles, while DAL favored side-chain oxidation. OL retained complex structures, forming syringols and desaspidinol, which contributed to heavier biocrude compounds. Sulfonate groups in LS were stabilized mostly as sulfides, leading to elevated sulfur content. These findings provide mechanistic insight into how lignin structure governs HTL behavior, enabling targeted control of biocrude yield and quality for renewable fuel production.

biocrude↗
DOE OSTI2023

Uncertainty analysis for techno-economic and life-cycle assessment of wet waste hydrothermal liquefaction with centralized upgrading to produce fuel blendstocks

Wet waste hydrothermal liquefaction is a promising technology for producing transportation fuels with much lower greenhouse gases emissions than petroleum-based fuels. However, its techno-economic and life cycle assessment are primarily based on laboratory scale testing data, subject to considerable uncertainties, and even bias, due to knowledge gaps. Here, a preliminary uncertainty analysis of key economic measures was conducted based on the 2019 state-of-technology model for biocrude production. Building on the preliminary analysis, this work presents a comprehensive uncertainty analysis in both economic and environmental measures of the entire supply chain of wet waste hydrothermal liquefaction to fuel blendstocks including biocrude upgrading based on the 2021 state-of-technology model. The analysis includes the most recent developments in hydrothermal liquefaction and biocrude upgrading technologies and Monte Carlo simulation based on an integrated model system including an improved reactor yield model, reduced-order process model, discounted cash flow economic model and simplified life-cycle assessment model. The estimated biocrude yield ranges from 42.2% to 52.4% with a median of 47.3%. The estimated fuel yield ranges from 34.7% to 42.7% with a median of 38.7%. The estimated minimum fuel selling price ranges from $\$ $2.28/gge to $\$ $3.45/gge with a median of $\$ $2.80/gge. Relative to petroleum-derived diesel, the estimated reduction in supply chain greenhouse gas emissions ranges from 73.4% to 81.8% with a median of 77.7%. Compared to the 2019 state-of-technology analysis, a significant improvement in biocrude selectivity and economic measures and reduction in uncertainties were achieved due to the incorporation of additional continuous experimental data sets, technology development and de-risking, and improvement in model accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synergistic Effects of Inexpensive Mixed Metal Oxides for Catalytic Hydrothermal Liquefaction of Food Wastes

Industrial wastes and natural mixed oxide materials were evaluated as inexpensive heterogeneous catalysts for catalytic hydrothermal liquefaction (CHTL) of food wastes. Red mud and red clay achieved biocrude carbon yields of 47.0 and 39.5% with higher heating values (HHVs) of 40.2 and 37.7 MJ kg –1 , respectively, which were much greater than those without the catalyst (biocrude carbon yield of 19.7% and HHV of 36.1 MJ kg –1 ). Biocrude characterization revealed that similar families of molecules were formed in the presence and absence of catalysts, implying that the main role of the catalyst is to promote rates of thermal reactions, leading to biocrude production without opening new pathways. The crystalline structures of inexpensive mixed oxides were stable under hydrothermal conditions, with modest calcium leaching (7.5%) and trace leaching of other metals. Using red clay or red mud resulted in >40% recovery of the energy in food waste as biocrude, greater than that obtained under noncatalytic conditions (18%) or from any individual constituent oxide (19–27%). The improved CHTL performance of the mixed metal oxides compared with single-metal oxides was attributed to the synergistic effects of base and acid sites present on catalyst surfaces; mixed oxides presented balanced densities of acids and bases, whereas the constituent oxides were either primarily acidic or primarily basic. Lastly, the percent of energy recovered as biocrude oil was strongly correlated with the base-to-acid site density ratio, providing an important performance predictor for CHTL conversion of food waste to bioenergy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as “Physical Template” on the Crystalline Order

Here, a new method for producing green needle coke (GNC) is developed by replacing the “heavy fraction” of petroleum pitch delayed coking with fast pyrolysis biocrude. A series of alternative biocrude distillation, carbonization, and calcination conditions were investigated to determine the influence of these processing parameters onto the crystalline structure of the resulting graphitized material. For the first time, the addition of biochar fines was found to serve as a “physical template” to increase the graphitic nature of the final product. During the initial biocrude carbonization (350–450 °C), volatile compounds are released, and aromatics in pyrolysis biocrude experience condensation, resulting in GNC solids with carbon contents above 95 wt % and some early lamellar structure. In the second stage of the thermal process (25–1500 °C), there are additional thermal decomposition reactions with an increase in the aromatic nature of the graphitized solid. It was found that systematic addition of biochar fines induces a nucleating effect during the GNC development. Thermogravimetric analysis suggests that biochar fines promote polycondensation reactions by modifying the biopitch structure and molecular weight, while elemental analysis (CHN) shows a reduction in both H/C and O/C ratios which are consistent with the increase in aromaticity and removal of oxygenated compounds as thermal treatment evolves. The effects of different bio-based pitch materials (after distillation) and GNC intermediates were evaluated by pyrolysis-gas chromatography mass spectrometry and Fourier transform infrared, displaying slight changes on product yields and quality. X-ray diffraction patterns taken after graphitization evidence an increase in the graphitic order with the addition of biochar fines. Transmittance electron microscopy depicts an improvement on graphitic morphology as biochar fine content increases. The use of biochar fines showed a significant increase in graphitic ordering at addition levels above 0.01 wt %. These results show that thermally treated biocrude/biochar fine systems can produce graphitic structures (hard carbon-like) that might be suitable for the manufacture of sodium-ion batteries.

09 BIOMASS FUELS↗
DOE OSTI2021

Pilot-scale hydrotreating of catalytic fast pyrolysis biocrudes: process performance and product analysis

Catalytic fast pyrolysis (CFP) is a technology option for producing advanced biofuels from hydrocarbon-rich biocrude intermediates. The relatively high oxygen content of biocrudes compared to petroleum intermediates increases hydrogen consumption and the lower thermal stability accelerates catalyst deactivation and reactor fouling hindering the adaptation of hydrotreating technology for biocrude upgrading into biofuels. In this study, four chemically different biocrude feeds were upgraded in a pilot scale hydroprocessing unit at similar process conditions using a commercial hydrodeoxygenation (HDO) catalyst. The biocrude feeds and hydrotreated products were characterized using standard ASTM procedures and advanced analytical techniques (GCxGC-FID and GCxGC-MS). HDO catalyst activity was monitored by changes in physical properties and chemical composition of the upgraded products as a function of time on stream. Aliphatic acids, ketones, aldehydes, and furan derivatives were completely converted during the hydrotreating tests while the concentration of aromatics, aliphatic hydrocarbons and phenolics increased during the hydrotreating tests. The oxygen content, nitrogen content, specific gravity, viscosity and the heavy end of the boiling point range (determined by simulated distillation) of the upgraded products increased with increasing time on stream during hydrotreating. The deactivation rate was the lowest for the biocrude feed that contained the most aliphatic and aromatic hydrocarbons and was the highest for the biocrude feed that had the most anhydrosugars. Overall, the HDO deactivation rate correlates with the total amount of oxygen in the feed (17 wt% to 29 wt%, on a wet basis).

09 BIOMASS FUELS↗
DOE OSTI2026

PERFORMANCE ANALYSIS OF AN ENGINEERING SCALE HYDROTHERMAL LIQUEFACTION SYSTEM

This work evaluates the Modular Hydrothermal Liquefaction System (MHTLS), an engineering-scale, integrated continuous HTL plant operated at the Pacific Northwest National Laboratory (PNNL), for converting realistic wet wastes into energy-dense biocrudes. The production campaigns discussed here processed algae, sewage sludges, lignocellulosic blends, Industrial food waste, and engineered food-waste slurries at 350?°C and around 200?bar, with nominal feed rates of ~12?L?h?¹. We report biocrude yields and composition, establish mass and elemental (C, N) balances, and quantify energy performance via heater duties, heat-exchanger behavior, and system-level efficiencies. Biocrudes contained 76–80?wt?% C (dry, ash-free) with HHVs of 38-41?MJ?kg?¹, substantially higher than feed materials HHVs of 16.6–26.1?MJ?kg?¹ and approaching petroleum fuels. Dry, ash-free biocrude yields of 32–53?wt?% corresponded to 43–71?wt?% carbon yields, with 18–40?wt?% of feed carbon routed to the aqueous phase. Thermal efficiencies were 50-65%, and total energy efficiencies, including reactor heat input, were 35-55%. A counter-current tube-in-tube heat exchanger delivered U values of 200–450?W?m?²?K?¹, with fouling-induced declines impacting heat recovery and heater duty. The analysis highlights three priorities for the process intensification of HTL: robust, fouling-resistant heat recovery, hydrodynamically suitable reactor and heat-exchanger designs, simplified and predictable solids management, and biocrude-water separation.

Biocrude production↗
DOE OSTI2024

Techno-economic analysis of bioplastic and biofuel production from a high-ash microalgae biofilm cultivated in effluent from a municipal anaerobic digester

Rotating Algae Biofilm Reactors (RABRs) are a promising technology for efficient treatment of wastewater and production of algae-based bioproducts. However, RABR-grown algae can contain a high content of ash (30–60 wt%, dry basis), which influences the technical and economic feasibility of bioproduct conversion processes. In this report, experimental studies and economic analysis were conducted to compare different processes for bioproduct conversion of a high-ash microalgae biofilm grown using a RABR treating 0.6 million gallons per day of anaerobic digestion centrate at the Central Valley Water Reclamation Facility in Salt Lake City, UT. Process and economic models were developed and compared for three conversion processes: 1) the production of bioplastics, 2) the production of bioplastics with a lipid-extraction pretreatment, and 3) the production of biocrude via hydrothermal liquefaction. Techno-economic analysis was performed for each conversion process, including three cases for algae productivity: 231, 391, and 577 metric tons per year (dry basis). The calculated value for the minimum plastic selling price (MPSP) of bioplastics produced from algae ranges from $\$4050$ to $\$3520$ per metric ton based on the baseline and final productivity cases of the RABR, respectively. The extraction of lipids in addition to bioplastic production results in an MPSP of $\$4570$ to $\$4000$ per metric ton for the same productivity cases. The relatively small production scale and complex processing for hydrothermal liquefaction results in a minimum fuel selling price of the biocrude of $\$5.32$ per gallon of gasoline equivalent. In conclusion, the conversion process for bioplastic production from whole algae has the highest income:expense ratio and the most cost-competitive pricing of the three modeled processes.

09 BIOMASS FUELS↗
DOE OSTI2023

Utilizing data-based modeling with low life cycle GHG emissions algae biofuels for engine optimization

Aquatic microalgae are a highly promising feedstock for the production of biocrude and tailored biofuels, with distinct advantages over traditional terrestrial crops, such as reduced land use and avoidance of food production competition. However, unlocking their full potential requires the development of biofuels with low life cycle greenhouse emissions biofuels, such as algae biofuels, which can significantly reduce the environmental impact of the transportation systems without requiring a complete overhaul of existing engine technology. In this study, we employ cutting-edge data-based AI modeling techniques to optimize the performance of heavy-duty engines, with a focus on transitioning towards biofuels with low life cycle greenhouse emissions biofuels. Our methodology offers significant advantages over traditional sweep testing, enabling efficient and accurate optimization of engine performance with minimal time and resources consumption. Our findings demonstrate the potential of utilizing this approach, with up to 55% NOx emissions reductions and up to 2% reduction in fuel consumption compared to the baseline optimized point. Moving forward, we plan to utilize a 30% blend of algae biofuels with diesel fuel, with the ultimate goal of achieving up to 60% lifecycle GHG emissions. Lastly, we plan to compare the results with 100% renewable biodiesel to add an additional dimension of investigating the impact of fuel chemistry on engine optimization. Overall, this study underscores the vital importance of biofuels for reducing the carbon footprint of the transportation sector and supporting a sustainable future. By harnessing the power of data-based AI modeling with low life cycle greenhouse emissions biofuels, we can accelerate the adoption of more environmentally friendly transportation systems and reduce their impact on the planet. Our findings contribute to this transition and offer insights for developing efficient and effective strategies for addressing global climate change.

09 BIOMASS FUELS↗
DOE OSTI2020

TAILORED BIOBLENDSTOCKS WITH LOW ENVIRONMENTAL IMPACT TO OPTIMIZE MCCI ENGINES

The overall objective of the project is to develop and demonstrate a microalgae bio-blendstock with greater than 60% greenhouse gas reduction potential relative to petroleum diesel, that can reduce sooting propensity, increase cetane number and improve engine thermal efficiency relative to a baseline diesel engine operating on conventional fuel. Specific objectives include: (1) development of a new framework for both LCA and TEA that explicitly considers temporal variation in productivity and the frequency of crop loss; (2) determination of how fuel compounds that can be produced from the algal biomass can be ‘bio-tailored’ based on the species composition and biological production process, and subsequent processing via HTL to biocrude, and upgrading of the biocrude; (3) execution of a feedback loop (algae production  biocrude refining  combustion optimization  feedback to refining stage), for optimization of fuels for MCCI combustion; (4) optimization of MCCI combustion and emissions performance, accounting first for the biological processes that dictate the chemical composition of biocrude oil, and second for the subsequent chemical processes that comprise mixing controlled compression ignition combustion; (6) simulation of MCCI engine combustion processes to demonstrate the incorporation of relevant fuel chemistry that captures the specific impacts of optimized algal fuels.

09 BIOMASS FUELS↗
DOE OSTI2020

Tailored Bioblendstocks with Low Environmental Impact to Optimize MCCI Engines

The overall objective of the project is to develop and demonstrate a microalgae bio-blendstock with greater than 60% greenhouse gas reduction potential relative to petroleum diesel, that can reduce sooting propensity, increase cetane number and improve engine thermal efficiency relative to a baseline diesel engine operating on conventional fuel. Specific objectives include: (1) development of a new framework for both LCA and TEA that explicitly considers temporal variation in productivity and the frequency of crop loss; (2) determination of how fuel compounds that can be produced from the algal biomass can be ‘bio-tailored’ based on the species composition and biological production process, and subsequent processing via HTL to biocrude, and upgrading of the biocrude; (3) execution of a feedback loop (algae production  biocrude refining  combustion optimization  feedback to refining stage), for optimization of fuels for MCCI combustion; (4) optimization of MCCI combustion and emissions performance, accounting first for the biological processes that dictate the chemical composition of biocrude oil, and second for the subsequent chemical processes that comprise mixing controlled compression ignition combustion; (6) simulation of MCCI engine combustion processes to demonstrate the incorporation of relevant fuel chemistry that captures the specific impacts of optimized algal fuels.

09 BIOMASS FUELS↗
DOE OSTI2021

Effect of Temperature on the Pilot-Scale Catalytic Pyrolysis of Loblolly Pine

A pilot-scale biomass catalytic pyrolysis unit with a nominal throughput of one tonne of biomass per day (1TPD) has been in operation since 2013 to investigate the process parameters that have the largest influence on biocrude yield, oxygen content, and chemical composition. A parametric study was conducted to investigate the effect of pyrolysis temperature, ranging from 433 to 581 °C, on biocrude yield and quality. A locally sourced loblolly pine feedstock and a commercially available, spray dried, nonzeolitic γ-Al 2 O 3 catalyst were used in individual experiments conducted at each pyrolysis temperature to achieve a minimum of 4 h of steady-state continuous operation. Typically, 600–800 kg of biomass was fed over a 12-h period, with one experiment extended to almost 29 h (1144-kg biomass fed) and one experiment interrupted by a process upset after just 7 h (411-kg biomass fed). Comprehensive analysis of collected gas, liquid, and solid products were used to calculate carbon balances (77% to 107%) for each experiment. The biocrude yield ranged from 12 to 18 wt % C and, in general, decreased with increasing pyrolysis temperature. The average steady-state biocrude yield as a function of temperature translated to a biocrude production rate between 40 and 50 gallons per dry ton. The biocrude oxygen content varied between 21 and 31 wt %, on a dry basis, and as expected, decreased with increasing pyrolysis temperature. The identified components in the semivolatile biocrude products are mostly methoxyphenols and other multiphenolic compounds. The multiphenolic compounds are demethoxylated at pyrolysis temperatures above 500 °C, producing biocrudes with higher concentrations of monophenols and polycyclic aromatic hydrocarbons. The concentration of anhydrosugars, like levoglucosan in the biocrudes, decreased with increasing pyrolysis temperature from ∼15 to ∼1 vol %.

biofuels↗
DOE OSTI2022

Elucidating the role of reactive nitrogen intermediates in hetero-cyclization during hydrothermal liquefaction of food waste

Hydrothermal liquefaction (HTL) has emerged as a promising strategy for converting abundant, water-rich organic streams into an energy-dense, sustainable, biocrude. Despite major strides in improving oil yields and process intensification, a key underlying challenge persists in relating the composition of the feedstock to the ultimate fate of nitrogen, which is especially important for biocrude quality. To elucidate how nitrogen partitions into the respective gas, aqueous, oil and solid hydrothermal products, food waste was treated under HTL conditions (15 wt% solids, 575 K reaction temperature, and 1 hour reaction time) and elemental, chromatographic and mass spectroscopy analyses were performed on the products to establish dominant product classes and to close mass, carbon, and nitrogen balances. Liquid products (aqueous and biocrude) were found to contain nearly 60% of the nitrogen, with a majority of the biocrude-phase nitrogen in the form of amides. Ab initio thermodynamic and kinetic simulations on model reactants were used to evaluate potential reaction pathways involving reactive nitrogen intermediates. A subsequent kinetic model was evaluated at reaction temperatures ranging 300–1000 K and for a range of feedstock compositions to identify primary reaction pathways. The Maillard reaction is revealed to be the dominant pathway for converting reactive nitrogen intermediates into observed products, especially those in which nitrogen is present as a heterocyclic aromatic. Subsequent product analysis by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) confirms strong agreement among the experimental data, kinetic model and proposed Maillard pathways.

09 BIOMASS FUELS↗
DOE OSTI2023

Desalting biocrude for improved downstream processing toward marine fuel application

Hydrothermal liquefaction of wet wastes (e.g., food waste and sewage sludge) offers a promising avenue for producing biocrude, but the resulting product is often contaminated with metals and water, impacting the biocrude upgrading steps to produce final fuel (e.g., jet and diesel). Here this study investigates the use of aqueous solutions of formic acid for desalting biocrudes and improving their quality. The results show that this approach significantly reduces both metal and water content, enabling mild hydrotreatment with reduced hydrogen consumption to further enhance the biocrude's quality. A preliminary technoeconomic analysis based on these experimental results shows that even without optimization, this washing process can yield biocrude with a minimum selling price of $1.87/GGE. Overall, our study demonstrates the potential for using dilute formic acid aqueous solutions to improve the quality of biocrudes, which can lead to more efficient and cost-effective conversion into biofuels.

09 BIOMASS FUELS↗