Search NASA⌕ Search

SEARCH · Search NASA

Results for “Boudouard reaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Sustainable H 2 -Rich Syngas Production via Microwave-Assisted vs Conventional Catalysis of Pinewood

Catalytic gasification of biomass is a promising method for producing hydrogen-rich syngas, which is a valuable resource for cleanenergy applications. In this study, microwave-assisted biomass gasification was compared with conventional thermally driven biomass gasification using pinewood as the biomass without the use of external gasifying agents (such as air, steam, and CO 2 ), under non-catalytic and catalytic conditions. The catalysts consisted of either an iron or a nickel catalyst, and the pinewood used as biomass contained 42% oxygen. This comparative analysis explores the differences in reaction chemistry, product yields, and the role of key reactions such as the water gas shift (WGS) reaction, Boudouard reaction, etc. The gas-phase and liquid-phase products were analyzed using online gas chromatography, and the fresh and spent catalysts were analyzed using X-ray diffraction (XRD) techniques. It was found that microwave-assisted gasification offers advantages in terms of enhanced reaction efficiency, catalyst stability, and hydrogen yield. For the microwave-assisted reaction, the gas yield reached 87%, the char yield was 12.1%, and the tar yield was less than 1% (0.793%) at 550 °C. In contrast, thermal-assisted gasification using the same catalyst produced a gas yield of 85.796%, char yield of 11.438%, and higher tar yield of 2.8% at 900 °C. The higher microwave-assisted performance was attributed to faster heating and better control over reaction conditions, higher reaction rates, and more favorable conditions for hydrogen production.

biomass↗
DOE OSTI2023

Microwave resonance enhanced CO 2 reduction using biochar

The conventional process for CO 2 conversion requires high energy and expensive catalysts, and shows poor product selectivity. Here, in this study, we address these challenges by investigating an environmentally friendly method for CO production through the variable frequency microwave-driven CO 2 Boudouard reaction over biochar. We hypothesized that tuning the microwave frequency to align with the dielectric properties of biochar, and thereby induce a resonance effect, could significantly enhance reaction efficiency. Experiments were conducted to explore the effect of microwave frequency on CO 2 conversion efficiency in the variable frequency microwave reactor operating within a frequency range of 2430–6000 MHz. Results reveal a significant resonance effect at 4225 MHz resulting in an outstanding CO 2 conversion of 96.3%, in sharp contrast to the complete absence of conversion observed at the conventional 2450 MHz. The resonance frequency not only facilitated exceptional conversion but also remarkably improved energy efficiency, yielding a productivity of 1427.5 µmol/kJ of CO. This represents a remarkable 474-fold increase compared to electrical heating. Furthermore, continuous microwave irradiation at this optimized frequency demonstrated remarkable stability and induced substantial enhancements in the pore structure and surface area of biochar. This innovative approach provides promising insights into sustainable and efficient CO production processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing carbon nanotube production from carbon dioxide and ethane using bimetallic catalysts

Converting CO 2 into carbon nanotubes (CNTs) offers a promising way for CO 2 utilization and sequestration, potentially mitigating environmental impacts from anthropogenic emissions. This study reports that bimetallic CoFe catalysts can increase CNT production from the reaction of CO 2 and C 2 H 6 by an order of magnitude compared to their monometallic counterparts. The active sites and CNT morphologies are composition-dependent: Co-rich catalysts (Co/Fe ratio ≥ 5) form stable face-centered cubic (fcc) CoFe alloys, producing cylindrical CNTs; Fe-containing catalysts (Co/Fe ≤ 2) favor body-centered cubic (bcc) CoFe alloy upon reduction, which transforms into carbides, resulting in bamboo-like CNTs. Experimental evidence and DFT calculations reveal that adjacent Fe and Co atoms modulate CO and C x H y adsorption, regulating CNT production pathways through the CO Boudouard reaction and C 2 H 6 decomposition. In conclusion, these results highlight the dual benefits of bimetallic catalysts in enhancing CNT yield and controlling CNT morphology through adjustment of catalyst compositions.

58 GEOSCIENCES↗
DOE OSTI2025

Microwave-assisted pyrolysis of liquid hydrocarbons using iron-based alumina catalysts obtained by solution combustion synthesis: The effect of synthesis parameters

The microwave-absorbing and catalytic properties of iron-based alumina (FeAl x O y ) materials have enabled their use as catalysts for the microwave-assisted generation of hydrogen and carbon via pyrolysis of hydrocarbons. Solution combustion synthesis (SCS) is a promising method to fabricate these materials, but the pyrolysis performance still needs to be improved. The present work investigated how altering the SCS parameters affects the pyrolysis of diesel fuel, gasoline, and crude oil. Two fuels (citric acid and glycine), four Fe:Al molar ratios, and two heating modes (hotplate and furnace) were tested. Fe/γ-Al 2 O 3 and Fe/β-SiC catalysts were prepared via incipient wetness impregnation for comparison. Among the three fossil fuels tested, diesel fuel yielded the highest amounts of H 2 and least amounts of CO x . The choice of fuel for the SCS process and the Fe/Al ratio strongly affected pyrolysis performance as they influence properties important for both catalysis and microwave absorption. The use of glycine resulted in catalysts that exhibited high H 2 yield and low CO 2 generation, which is explained by the revealed structural differences. The increase in the Fe:Al molar ratio accelerated microwave heating by adding more magnetic loss but also increased the amount of CO x . When the optimal SCS parameters were used, FeAl x O y catalysts outperformed Fe/γ-Al 2 O 3 and Fe/β-SiC. The high H 2 generation efficiency of the SCS catalysts is explained by their enhanced microwave-absorption properties. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed the formation of large-diameter CNTs via the tip-growth mechanism. The regeneration of SCS catalysts was demonstrated via the Boudouard reaction.

Carbon nanotubes↗
DOE OSTI2023

Comparison of direct and CO 2 -oxidative dehydrogenation of propane

Propane dehydrogenation to propylene has received increasing attention due to the fast growth in propylene demand and the exploration of shale gas containing propane. Direct dehydrogenation of propane (DDHP) offers high propylene selectivity but is limited by quick deactivation due to coke formation. CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP) can consume CO 2 and meanwhile reduce coke deposition via the reverse Boudouard reaction. Here in the current review, direct and CO 2 -assisted dehydrogenation of propane has been compared from three aspects: reaction mechanisms, catalyst compositions, and CO 2 footprint analysis. As the average CO 2 emissions from electricity generation decrease due to the utilization of renewable energy, CO 2 -ODHP potentially leads to a net-negative CO 2 footprint while DDHP cannot.

58 GEOSCIENCES↗
DOE OSTI2024

Microwave-assisted pyrolysis of hydrocarbons using iron-based alumina catalysts obtained via solution combustion synthesis

The demand for hydrogen is growing which makes the development of clean and efficient H2 synthesis technologies imperative. Microwave-assisted, thermocatalytic, dehydrogenation of hydrocarbons has demonstrated the ability to generate H2 with high yield and selectivity, leaving behind valuable solid carbon byproducts. However, this microwave-assisted process is unoptimized which prevents it from being utilized in industry. A critical component of optimization is the development of a catalyst that is catalytically active, a good microwave absorber, and can be regenerated for repeated dehydrogenation cycles. Previous studies that focused on plastic waste decomposition have used iron-based alumina (FeAlxOy) made via solution combustion synthesis (SCS). Unexplored is the effect of tuning SCS parameters on dehydrogenation performance, the use of these materials in hydrocarbon decomposition to H2, and the regeneration of these catalysts. This dissertation has three objectives: (1) characterize the relationship between SCS parameters and the material properties of FeAlxOy, (2) determine how differences in the material properties of FeAlxOy influence their performance as catalysts during microwave-assisted pyrolysis of fossil fuels, and (3) investigate the Boudouard reaction to regenerate the FeAlxOy post-dehydrogenation.

Chanoi, Zachary Aidan↗
DOE OSTI2025

Initiation of dusting corrosion in high-temperature alloys under CO exposure

Carbon monoxide is commonly encountered in energy systems, yet its reactivity with structural alloys—critical heat-resistant components in these systems—has been largely overlooked compared to the well-documented effects of oxidizing gases. In contrast, we demonstrate the high-temperature reaction of CO with NiAl using in-situ low-energy electron microscopy and X-ray photoemission electron microscopy. Our results show that CO dissociates into atomic oxygen and carbon, resulting in two concurrent reactions: selective oxidation of aluminum to form Al 2 O 3 and the initiation of dusting corrosion through carbon dissolution into the alloy and subsequent carbon deposition on the surface. These reactions produce spatially distinct surface products, preventing the formation of a continuous protective Al oxide layer. These results reveal a preference for the dissociative pathway of CO over the classic Boudouard disproportionation reaction that forms CO 2 . These insights not only advance our understanding of CO-induced alloy degradation but also highlight the practical implications for managing alloy stability and optimizing catalysis in carbon-rich environments, such as those in petrochemical processing and hydrocarbon combustion.

36 MATERIALS SCIENCE↗