Search NASA⌕ Search

SEARCH · Search NASA

Results for “Brønsted Acids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Use of a Lewis acid, a Brønsted acid, and their binary mixtures for the hydrothermal liquefaction of lignocellulose

The main objective of the present study is to investigate the effect of a Lewis acid, Brønsted acid, and their combined use on the hydrothermal liquefaction of lignocellulosic biomass. Hydrothermal liquefaction of teak wood was conducted at 250, 300 and 350 °C for 15, 30 and 60 min. Hydrothermal liquefaction of teak wood was carried out at 300 °C for 30 min (the best optimum conditions) without and with the use of Mg(ClO 4 ) 2 , HClO 4 , and HClO 4 /Mg(ClO 4 ) 2 at various loadings (2–10 mmol/15 g wood). The highest bio-oil yield was obtained with the non-catalytic run. All tested catalysts have negative effect on bio-oil yields. The bio-oil yields generally decreased with increasing the catalyst loadings. The deoxygenation degree in bio-oils changed depending on the type of catalyst and loading. A high degree of de-oxygenation took place with Mg(ClO 4 ) 2 catalysts. An increased catalyst loading led to decreased aromatic contents of bio-oils catalyzed by either Mg(ClO 4 ) 2 or HClO 4 . The use of a catalyst increased total naphtha fractions in bio-oils. The highest heating value of the bio-oil was estimated to be approximately 30 MJ/kg. Gas chromatography–mass spectrometry analysis revealed that the bio-oils from the non-catalytic and catalytic runs contained aldehydes, ketones, phenols, acids, esters and alcohols. Furthermore, the relative yields of the oxygenated compounds were affected by catalyst type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrically driven proton transfer promotes Brønsted acid catalysis by orders of magnitude

Electric fields play a key role in enzymatic catalysis and can enhance reaction rates by 100,000-fold, but the same rate enhancements have yet to be achieved in thermochemical heterogeneous catalysis. In this work, we probe the influence of catalyst potential and interfacial electric fields on heterogeneous Brønsted acid catalysis. We observed that variations in applied potential of ~380 mV led to a 100,000-fold rate enhancement for 1-methylcyclopentanol dehydration, which was catalyzed by carbon-supported phosphotungstic acid. Mechanistic studies support a model in which the interfacial electrostatic potential drop drives quasi-equilibrated proton transfer to the adsorbed substrate prior to rate-limiting C–O bond cleavage. Large increases in rate with potential were also observed for the same reaction catalyzed by Ti/TiO y H x and for the Friedel Crafts acylation of anisole with acetic anhydride by carbon-supported phosphotungstic acid.

Science & Technology - Other Topics↗

Modulating the dynamics of Brønsted acid sites on PtWOx inverse catalyst

Here metal-metal oxide (M-MO) inverse catalysts are broadly applied. Brønsted acid sites on the oxide overlayers are often hypothesized to drive selective C-O bond activation. However, the Brønsted acid site nature and dynamics under working conditions remain poorly understood due to multiple materials functionalities. Here, we investigate the formation and the dynamics of Brønsted acid and redox sites on PtWO x /C under working conditions. DFT-based thermodynamic calculations and microkinetic modeling reveal a complex interplay between Brønsted acid and redox sites and potentially fast catalyst dynamics at comparable time scales to the chemistry. Combining in situ characterization and probe chemistry, we demonstrate that the density of Brønsted acid sites on the PtWO x /C inverse catalyst could be modulated by up to two orders of magnitude by altering the reaction parameters and by the chemistry itself. We elicit an order of magnitude increase in the acid-catalyzed dehydration average reaction rate by periodic hydrogen pulsing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Activity of Brønsted Acid Sites in UiO-66 for Cyclohexanol Dehydration

Brønsted-acid sites are introduced via –OSO 3 H groups on the coordinatively unsaturated ZrO 2 nodes of UiO-66 metal organic frameworks (MOF). Such groups create strong Brønsted acidic sites that are active for cyclohexanol and ethanol dehydration (in liquid organic phase and gas phase, respectively). The intrinsic activity of Brønsted acid sites at nodes increased by increasing the concentration of sulfur, which is attributed to a shift from isolated µ 3 -OSO 3 H to two groups [(µ 3 -OSO 3 H) 2 ] interacting via hy-drogen bonding. For cyclohexanol dehydration, the relatively low activation enthalpies and negative transition entropies point to an E2 elimination mechanism, similar to dehydration with MFI zeolites in organic solvents. Furthermore, our results, show that the catalytic activity can be manipulated via the functionalization of zirconia nodes of the MOF framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linking low and high temperature NO oxidation mechanisms over Brønsted acidic chabazite to dynamic changes of the active site

The oxidation of NO over Brønsted acid sites in chabazite (CHA) zeolites shows an atypical temperature dependence; at low temperature the apparent activation energy is negative, but it becomes positive as the temperature exceeds a transition temperature. To explain this behavior we used density functional theory and statistical mechanics to investigate high and low temperature mechanisms for this reaction and propose a dynamic active site change in response to temperature variation. Our simulations show that the apparent activation barrier in the low temperature regime is more negative over Brønsted acidic CHA as compared to the siliceous zeolite framework. This effect is attributed to further enthalpic stabilization of the transition states by physical interaction with the H-CHA Brønsted acid sites. At elevated temperature, our calculations support both the existence and the significant catalytic role of NO+ in providing a modified active site. The temperature dependent transformation of the active site from H-CHA to NO-CHA sites may occur via two plausible ion-exchange mechanisms that define a transition temperature for the reaction. This transition temperature can be tuned by incorporating different trivalent metal atoms (B, Al, Ga or In) within the CHA framework. We found the lowest transition temperature for H-[In] CHA and H-[Ga]CHA. Here, the ability to control the dynamic response of the active site and the associated switch between low and high temperature mechanism with negative and positive apparent activation energy, respectively, is of fundamental interest for the design of zeolite catalysts operating in the presence of NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promotion of adsorptive and catalytic properties of zeolitic Brønsted acid sites by proximal extra-framework Si(OH) x groups

Steric confinement in zeolites influences the catalytic conversion of alkanes. For zeolitic Brønsted acid sites, proximate extra-framework species introduce additional confinement to the pore constraints, enhancing the catalytic activity of alkane cracking. Although extra-framework alumina has been the most studied, here we report the element-specific impact of silica species. Further, by grafting extra-framework silica species close to Brønsted acid sites in H-ZSM-5 zeolite, the binding of bases like pyridine and amines is strengthened via van der Waals interactions with their aryl or alkyl chains. Brønsted acid sites close to extra-framework silica achieve a higher reaction rate of protolytic cracking of n-pentane via enthalpic (unlike entropic, as with extra-framework alumina) stabilization of the transition state by 24–51 kJ mol −1 . The lower activation energy points to an earlier transition state than in the presence of extra-framework alumina, with a better stabilization of the carbonium ions in the transition state compared to the parent zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Abstract Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO 3 H 2 by post‐synthesis modification. Characterization reveals that UiO‐66‐PO 3 H 2 retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.

Dorneles de Mello, Matheus↗

Dynamics of inverse metal oxides on metal catalysts using spectro-kinetics: reversible Brønsted acid site formation and irreversible reduction

Brønsted acid sites (BASs) in inverse catalysts are vital for the selective hydrogenolysis of polyols, specifically cleaving secondary C–O bonds. These BASs form dynamically in situ in an H 2 environment. While H 2 enables rapid BAS generation on short timescales, it reduces the catalyst at prolonged exposures. The active center for BAS generation, the kinetics of BAS formation, its reverse decomposition, and the irreversible oxide reduction have lacked direct experimental evidence. Here, aided by advanced spectro-kinetic studies, we identify trimeric W 3 O x sites on Pt as the active centers for BAS generation, whereas isolated WO x species on SiO 2 act merely as spectator species, demonstrated using an inverse WO x /Pt catalyst as a representative system. A detailed kinetic profile capturing the dynamics of W 3 O x sites on Pt is also established. The rate constant for BAS formation is two orders of magnitude higher than for its decomposition, which is one order of magnitude faster than the irreversible site reduction. Co-fed H 2 O suppresses the site reduction by ∼50%. Furthermore, the H 2 partial pressure plays an important role. While lower gas-phase H 2 partial pressure does not influence the reversible BAS formation, it can significantly (∼3×) suppress catalyst reduction. Finally, these findings offer critical insights into optimizing reaction conditions through periodic H 2 pulsing, enhancing catalyst stability and performance in hydrogenolysis reactions.

Sourav, Sagar [Indian Inst. of Technology (IIT), M↗

Steam-Induced Coarsening of Single-Unit-Cell MFI Zeolite Nanosheets and Its Effect on External Surface Brønsted Acid Catalysis

Commonly used methods to assess crystallinity, micro-/mesoporosity, Brønsted acid site density and distribution (in micro- vs. mesopores), and catalytic activity suggest nearly invariant structure and function for aluminosilicate zeolite MFI two-dimensional nanosheets before and after superheated steam treatment. Yet, pronounced reaction rate decrease for benzyl alcohol alkylation with mesitylene, a reaction that cannot take place in the zeolite micropores, is observed. Transmission electron microscopy images reveal pronounced changes in nanosheet thickness, aspect ratio and roughness indicating that nanosheet coarsening and the associated changes in the external (mesoporous) surface structure are responsible for the changes in the external surface catalytic activity. Finally, superheated steam treatment of hierarchical zeolites can be used to alter nanosheet morphology and regulate external surface catalytic activity while preserving micro- and mesoporosity, and micropore reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of Brønsted Acid Sites in Zeolites by Water Desorption Thermogravimetry

The many studies that have been conducted on water adsorption on zeolites were carried out in “adsorption” mode, from adsorption isotherms or single-point measurements, with the samples being first degassed at high temperature, and then exposed to water vapor at variable partial pressure. Here, we report Thermogravimetric Analysis (TGA) studies of HZSM-5 saturated with water at room temperature, thus studying water adsorption in “desorption” mode. In this work, TGA was used to ascertain the amount of water remaining as a function of the pretreatment temperature, and to identify the temperature at which one water molecule per framework Al atom persists. Solid-state 1H NMR spectroscopy, combined with molecular modeling, provided evidence for water molecules hydrogen bonded to Brønsted acid sites and formation of oxonium species for distinct water per framework Al atom. TGA is shown to be a simple and expeditious technique to measure the number of Brønsted acid sites in aluminosilicate zeolites, with advantages over the traditional methods of IR or TPD of dangerous adsorbed ammonia or pyridine. TGA of adsorbed water also provides information on the water clusters formed at the acid sites of HZSM-5, which are proportional to the number of acid sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steam‐Induced Coarsening of Single‐Unit‐Cell MFI Zeolite Nanosheets and Its Effect on External Surface Brønsted Acid Catalysis

Abstract Commonly used methods to assess crystallinity, micro‐/mesoporosity, Brønsted acid site density and distribution (in micro‐ vs. mesopores), and catalytic activity suggest nearly invariant structure and function for aluminosilicate zeolite MFI two‐dimensional nanosheets before and after superheated steam treatment. Yet, pronounced reaction rate decrease for benzyl alcohol alkylation with mesitylene, a reaction that cannot take place in the zeolite micropores, is observed. Transmission electron microscopy images reveal pronounced changes in nanosheet thickness, aspect ratio and roughness indicating that nanosheet coarsening and the associated changes in the external (mesoporous) surface structure are responsible for the changes in the external surface catalytic activity. Superheated steam treatment of hierarchical zeolites can be used to alter nanosheet morphology and regulate external surface catalytic activity while preserving micro‐ and mesoporosity, and micropore reaction rates.

Guefrachi, Yasmine↗

Synergistic effect of dual Brønsted acidic deep eutectic solvents for oxidative desulfurization of diesel fuel

Deep eutectic solvents (DESs) are generally used as attractive solvents or extractants rather than catalysts in the field of synthesis and separation. Herein, dual Brønsted acidic DESs were prepared by mixing sulfonated quaternary ammonium and oxalic acid as extractants and catalysts for deep oxidative desulfurization. Compared to the DESs with single acidic group, the dual acidic DESs exhibited much higher catalytic activity likely due to the synergistic effect. The 1 H NMR study indicated that the weak interaction between DES and sulfur compounds led to a low extraction capacity. However, the sulfur removal could reach 97.7% under optimized reaction conditions. Density functional theory (DFT) calculations demonstrated that sulfonic group and carboxylic group are of equal importance to desulfurization performance. Further, the desulfurization efficiency was also strongly affected by the viscosity of DESs. Here, we put forward a new strategy that the reaction time could be sharply shortened to 40 min and 100 min by adding low viscous acetonitrile and polyethylene glycol into DES to form mixing reaction system, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contact with Electrically Conductive Inert Solids Alters Intrinsic Heterogeneous Brønsted Acid Catalysis

Interfacial electric fields at heterogeneous catalyst surfaces have been demonstrated to alter kinetics of liquid-phase reactions. In these systems, electric fields are generated from applying a potential to the catalyst through connection to a potentiostat or through electron transfer from redox-active species in solution. Here, we demonstrate that catalyst polarization can also occur by simply contacting electrically conductive inert solids, leading to the counterintuitive conclusion that a catalyst particle touching an inert solid can alter intrinsic reaction rates. Using dehydration of 1-methylcyclopentanol to 1-methylcyclopentene catalyzed by Brønsted-acidic carboxylic acid groups on carbon nanotubes as a proof-of-concept probe reaction, we show that catalyst contact with inert, thermally reduced carbon nanotubes leads to order-of-magnitude changes in reaction rate. Furthermore, we demonstrate that these contact-induced effects can also be observed under standard laboratory reaction conditions, where particle-to-particle contact in stirred catalyst powder suspensions is sufficient to demote rates by ∼8-fold. This work provides the foundation for a new method of reaction rate control, which could have implications whenever heterogeneous catalyst particles are in contact with inert materials for liquid-phase reactions in the presence of electrolyte.

Alcohols↗

Solvent structure and dynamics over Brønsted acid MWW zeolite nanosheets

In the liquid phase of heterogeneous catalysis, solvent plays an important role and governs the kinetics and thermodynamics of a reaction. Although it is often difficult to quantify the role of the solvent, it becomes particularly challenging when a zeolite is used as the catalyst. This difficulty arises from the complex nature of the liquid/zeolite interface and the different solvation environments around catalytically active sites. Here, we use ab initio molecular dynamics simulations to probe the local solvation structure and dynamics of methanol and water over MWW zeolite nanosheets with varying Brønsted acidity. We find that the zeolite framework and the number and location of the acid sites in the zeolite influence the structure and dynamics of the solvent. In particular, methanol is more likely to be in the vicinity of the aluminum (Al 3+ ) at the T4 site than at T1 due to easy accessibility. The methanol oxygen binds strongly to the Al at the T4 site, weakening the Al–O for the bridging acid site, which results in the formation of the silanol group, significantly reducing the acidity of the site. The behavior of methanol is in direct contrast to that of water, where protons can easily propagate from the zeolite to the solvent molecules regardless of the acid site location. Furthermore, our work provides molecular-level insights into how solvent interacts with zeolite surfaces, leading to an improved understanding of the catalytic site in the MWW zeolite nanosheet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creating Brønsted acidity at the SiO 2 -Nb 2 O 5 interface

Catalytically active acid sites associated with the silica-niobia interface were probed with a series of overcoated SiO 2 on Nb 2 O 5 (SiO 2 /Nb 2 O 5 ) mixed oxide materials prepared by deposition of tetraethyl orthosilicate onto niobic acid (Nb 2 O 5 nH 2 O) or calcined niobia (Nb 2 O 5 ). NH 3 TPD and pyridine DRIFTS studies indicated that the speciation of acid sites in the materials evolved as a function of SiO 2 loading, impacting the quantity and stability of Brønsted sites. Catalyst activity was highly dependent on SiO 2 loading in the liquid phase hydroalkoxylation of dihydropyran with n-octanol. At SiO 2 surface densities corresponding to approximately 1 Si per 2 surface Nb, the activity of these catalysts passed through a maximum approximately 20 times higher than the activity of calcined Nb 2 O 5 . We found that apparent reaction barriers measured over the most active SiO 2 /Nb 2 O 5 catalysts were 10 kJ/mol lower than those measured over niobic acid, suggesting that the OH features unique to the SiO 2 -Nb 2 O 5 interface were slightly more reactive than those on niobic acid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗