Search NASA⌕ Search

SEARCH · Search NASA

Results for “Brewster angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The Brewster angle effect in SAR polarimetry

For the double bounce case, where the radar signal is reflected twice before returning to the radar antenna, some polarization effects may be observed related to the dielectric constant of the two surfaces causing the reflections. The most noticeable effect would be that the returned signal would be preferentially H polarized. In fact, it may be possible to discern the Brewster angle for both surfaces. The locations of the Brewster angle will depend on the dielectric constant and permittivity of each surface. If it is assumed that both reflections are in the same plane of incidence, and that both surfaces are smooth and flat, there is a straightforward relationship between the degree of linear polarization m and both the dielectric constants of the two reflecting surfaces and the angle of incidence of the illuminating wave: m carat = cos 2(arccot (square root of (R(sub v) / R(sub h)))) where R(sub v,h) are the V and H polarized Fresnel reflection coefficients for two surfaces perpendicular to each other. The degree of linear polarization may be calculated from AIRSAR compressed Stokes data and compared with the given equation. The degree of linear polarization may also be calculated using tree models and compared with AIRSAR data. With further work, it may be possible to use the degree of linear polarization to determine surface parameters of certain imaged areas.

Chapman, B.↗
NASA NTRS1968

Brewster angle of the lunar crust.

Brewster null in reflections of Explorer 35 telemetry transmissions from lunar surface, discussing radiation reflection properties of lunar maria and Flamsteed area

Tyler, G. L.↗
DOE OSTI2023

Brewster angle-cavity ringdown spectroscopy for low temperature plasma measurements in multiphases

Here we report on the development of a Brewster angle-cavity ringdown spectroscopy (BA-CRDS) system for low temperature plasma diagnostics. The system can measure gas species in solutions, with a detection limit (minimum detectable absorbance) of 9.1 × 10 -5 , which is equivalent to a detection limit of 0.04 parts per billion for measuring OH radicals in water at 308 nm. With higher reflectivity ringdown mirrors and improved design of a Brewster angle cell, the detection limit can potentially be up to 10 -6 or lower. In this exploratory study, the absorption cross sections of HgBr 2 and H 2 O 2 in the aqueous phase at 256 nm are measured to be (1.8 ± 0.1) × 10 -18 cm 2 and (5.2 ± 0.5) × 10 -20 cm 2 , respectively. Furthermore, temporal profiles of absorbance from distilled water, HgBr 2 , and H 2 O 2 solutions when interacting with a helium atmospheric plasma jet are individually characterized at different plasma powers, gas flow rates, and/or solute concentrations. The observed linear temporal profiles of absorbance from the plasma-interacted water suggest formation of H 2 O 2 from plasma-generated OH radicals, while the nonlinear temporal profiles from the plasma-treated HgBr 2 solutions reveal possible removal of HgBr 2 by OH radicals. Our results demonstrate that the new BA-CRDS system is a powerful tool for quantification of reactive plasma species in multiphases or other complex settings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Instrument for Measuring Temperature of Water

A pseudo-Brewster-angle infrared radiometer has been proposed for use in noncontact measurement of the surface temperature of a large body of water (e.g., a lake or ocean). This radiometer could be situated on a waterborne, airborne, or spaceborne platform. The design of the pseudo-Brewster-angle radiometer would exploit the spectral-emissivity and polarization characteristics of water to minimize errors attributable to the emissivity of water and to the reflection of downwelling (e.g., Solar and cloud-reflected) infrared radiation. The relevant emissivity and polarization characteristics are the following: . The Brewster angle is the angle at which light polarized parallel to the plane of incidence on a purely dielectric material is not reflected. The pseudo-Brewster angle, defined for a lossy dielectric (somewhat electrically conductive) material, is the angle for which the reflectivity for parallel-polarized light is minimized. For pure water, the reflectivity for parallel-polarized light is only 2.2 x 10(exp -4) at its pseudo- Brewster angle of 51deg. The reflectivity remains near zero, several degrees off from the 51deg optimum, allowing this angle of incidence requirement to be easily achieved. . The wavelength range of interest for measuring water temperatures is 8 to 12 microns. The emissivity of water for parallel- polarized light at the pseudo-Brewster angle is greater than 0.999 in this wavelength range. The radiometer would be sensitive in the wavelength range of 8 to 12 microns, would be equipped with a polarizer to discriminate against infrared light polarized perpendicular to the plane of incidence, and would be aimed toward a body of water at the pseudo- Brewster angle (see figure). Because the infrared radiation entering the radiometer would be polarized parallel to the plane of incidence and because very little downwelling parallel-polarized radiation would be reflected into the radiometer on account of the pseudo-Brewster arrangement, the radiation received by the radiometer would consist almost entirely of thermal emission from the surface of the water. Because the emissivity of the water would be very close to 1, the water could be regarded as a close approximation of a blackbody for the purpose of computing its surface temperature from the radiometer measurements by use of the Planck radiation law.

Ryan, Robert↗
NASA NTRS2007

Fitting a Two-Component Scattering Model to Polarimetric SAR Data from Forests

Two simple scattering mechanisms are fitted to polarimetric synthetic aperture radar (SAR) observations of forests. The mechanisms are canopy scatter from a reciprocal medium with azimuthal symmetry and a ground scatter term that can represent double-bounce scatter from a pair of orthogonal surfaces with different dielectric constants or Bragg scatter from a moderately rough surface, which is seen through a layer of vertically oriented scatterers. The model is shown to represent the behavior of polarimetric backscatter from a tropical forest and two temperate forest sites by applying it to data from the National Aeronautic and Space Agency/Jet Propulsion Laboratory's Airborne SAR (AIRSAR) system. Scattering contributions from the two basic scattering mechanisms are estimated for clusters of pixels in polarimetric SAR images. The solution involves the estimation of four parameters from four separate equations. This model fit approach is justified as a simplification of more complicated scattering models, which require many inputs to solve the forward scattering problem. The model is used to develop an understanding of the ground-trunk double-bounce scattering that is present in the data, which is seen to vary considerably as a function of incidence angle. Two parameters in the model fit appear to exhibit sensitivity to vegetation canopy structure, which is worth further exploration. Results from the model fit for the ground scattering term are compared with estimates from a forward model and shown to be in good agreement. The behavior of the scattering from the ground-trunk interaction is consistent with the presence of a pseudo-Brewster angle effect for the air-trunk scattering interface. If the Brewster angle is known, it is possible to directly estimate the real part of the dielectric constant of the trunks, a key variable in forward modeling of backscatter from forests. It is also shown how, with a priori knowledge of the forest height, an estimate for the attenuation coefficient of the canopy can be obtained directly from the multi-incidence-angle polarimetric observations. This attenuation coefficient is another key variable in forward models and is generally related to the canopy density.

temperate forests↗
NASA NTRS1985

Microwave blackbodies for spaceborne receivers

The properties of microwave blackbody targets are explained as they apply to the calibration of spaceborne receivers. Also described are several practicable, blackbody targets used to test and calibrate receivers in the laboratory and in the thermal vacuum chamber. Problems with the precision and the accuracy of blackbody targets, and blackbody target design concepts that overcome some of the accuracy limitations present in existing target designs, are presented. The principle of the Brewster angle blackbody target is described where the blackbody is applied as a fixed-temperature test target in the laboratory and as a variable-temperature target in the thermal vacuum chamber. The reflectivity of a Brewster angle target is measured in the laboratory. From this measurement, the emissivity of the target is calculated. Radiatively cooled thermal suspensions are discussed as the coolants of blackbody targets and waveguide terminations that function as calibration devices in spaceborne receivers. Examples are given for the design of radiatively cooled thermal suspensions. Corrugated-horn antennas used to observe the cosmic background and to provide a cold-calibration source for spaceborne receivers are described.

Stacey, J. M.↗
NASA NTRS2002

Instrument for Measuring Temperature of Water

A pseudo-Brewster angle infrared radiometer has been proposed for use in noncontact measurement of the surface temperature of a large body of water (e.g., a lake or ocean). This radiometer could be situated on a waterborne, airborne, or spaceborne platform. The design of the pseudo-Brewster angle radiometer would exploit the spectral emissivity and polarization characteristics of water to minimize errors attributable to the emissivity of water and to the reflection of downwelling (e.g., Solar and cloud-reflected) infrared radiation.

Ryan, Robert↗
NASA NTRS1980

Acoustic resonances and sound scattering by a shear layer

The reflection and transmission characteristics of plane waves scattered by a finite-thickness shear layer having a linear velocity profile and bounded by two otherwise uniform parallel flows is examined using the pressure perturbation equation solutions in the shear layer shown previously to be in terms of Whittaker M functions. In addition to the angle of plane wave incidence and the relative Mach number of the flows bounding the shear layer, it is found that the scattering properties of the shear layer depend crucially upon a parameter tau in such a manner that the case tau approaching zero characterizes the long wavelength properties of the layer and the case tau approaching infinity characterizes the short wavelength properties of the layer. In contrast to the region of ordinary reflection in the cases where the corresponding vortex sheet does not have a Brewster angle, the values of the reflection coefficient up to tau of 2 follow those of the vortex sheet; for the case for which the corresponding vortex sheet has a Brewster angle, the magnitude of the reflection coefficient may be sensitive to even small changes in tau in certain cases.

Koutsoyannis, S. P.↗
NASA NTRS1979

Acoustic resonances and sound scattering by a shear layer

The energy reflection coefficient is evaluated numerically for plane waves incident on a plane shear layer having a linear velocity profile. The shear layer is found to exhibit no resonances and no Brewster angles. The behavior of the reflection coefficient depends crucially on the parameter tau, a nondimensional measure of the disturbance Strouhal number with respect to the disturbance Mach number in the mean flow direction. For moderate values of tau, the amplified reflection regime degenerates into the total reflection one, whereas in the ordinary reflection regime the variation of the reflection coefficient with tau depends on whether or not the corresponding vortex sheet has a Brewster angle. The results indicate that caution should be exercised in uncritically modeling a finite thickness shear layer by a corresponding vortex sheet.

Koutsoyannis, S. P.↗
NASA NTRS1977

Polarimeter measures sea state characteristics using emitted infrared radiation

An infrared polarimeter, capable of operating between 1 and 12 micrometers wavelength has been used to measure the polarization of emitted radiation from the sea. The observed polarization at 10.6 micrometers from a smooth sea was found to be positive, indicating the dominance of reflected infrared sky radiation over the emitted. With the appearance of waves, the percent polarization increased, as expected, for a zenith angle well above the Brewster angle for water. This is qualitatively in accordance with a model presented to explain the behavior. Initial analyses indicate that the polarized components of the sea's emitted and reflected radiation are affected by type and direction of waves, angle of viewing, and foam. The effects of variations in these parameters require further delineation. The infrared polarimetric technique appears to be a novel new passive method for remote monitoring of waves.

Egan, W. G.↗
NASA NTRS2015

Structure and Dynamics of Interfaces: Drops and Films

We aim to acquire measurements of the structure and dynamics of certain liquid-fluid interfaces using an ensemble of techniques in collaboration: (1) Total internal reflection (TIR) Surface light scattering spectroscopy (SLSS), (2) Brewster angle microscopy (BAM), and (3) Drop-shape analysis. SLSS and BAM can be done on a shared interfacial footprint. Results using a 50-50 mixture of pentane-isohexane, which extends the range of NASA's Confined Vapor Bubble (CVB) experiment, yield surface tension results that differ from the expected Langmuir Fit. These results were confirmed using both the SLSS and drop-shape analysis approaches.

pentane-isohexane mixture↗
NASA NTRS1989

Operational efficiency increase in a copper vapor laser due to the replacement of vacuum jacket brewster windows with flat windows

The vacuum integrity of the discharge tube of a copper vapor laser (CVL) is normally protected by Brewster angled windows. In an attempt to increase the operating efficiency of the CVL, flat windows were used to replace the Brewster windows. Experimental data confirm that the overall efficiency of the CVL does increase when such windows are used. The experimental results are discussed in terms of a computer model found in the literature. The cause of the efficiency increase appears due to a double optical cavity set up by the flat windows. However, the variation of the efficiency due to changes in the pulse repetition frequency (PRF) and buffer gas pressure are less well understood.

Estep, Lee↗
NASA NTRS1993

Determination of average refractive index of spin coated DCG films for HOE fabrication

The refractive index of holographic emulsions is an important parameter needed for designing holographic optical elements (HOE's). Theoretical calculations of the accuracy required for the refractive index and thickness of emulsions needed to meet predetermined Bragg angle conditions are presented. A modified interferometric method is used to find average refractive index of the unexposed and the developed dichromated gelatin holographic films. Slanted transmission HOE's are designed considering the index and thickness variations, and used to verify the index measurement results. The Brewster angle method is used to measure surface index of the unexposed and the developed films. The differences between average index and surface index are discussed. Theoretical calculation of the effects of index variation on diffraction efficiency, and experimental results for index modulation variation caused by process changes are also presented.

Kim, T. J.↗
DOE OSTI2026

Amphiphilic Baskets for Supramolecular Nanoarchitectures at Interfaces: Inverted Monolayer Formation on Water

Interfacial chemistry of molecular baskets remains poorly understood despite their promise for supramolecular applications of detection and sequestration of toxic molecules including those of illicit drugs, organophosphorus compounds, and anticancer agents. We present a fundamental investigation of the interfacial behavior of three amphiphilic supramolecular baskets (ASB 4, 8, and 12), having increasingly longer yet linear alkyl chains at the top of their bowl-shaped cavity. The studies were completed at the air−water interface to elucidate surface activity, interfacial stability, self-assembly, and monolayer organization that drive inverted monolayer formation, in which the molecular arms orient toward the aqueous phase in a configuration opposite to that typically observed for lipids. Herein, surface pressure−area isotherms of ASB 4, 8, 12, deposited on a water surface, were performed in tandem with nonequilibrium relaxation experiments to quantify surface activity, thermodynamic stability, and monolayer compressibility of the baskets’ monolayer assembly. Brewster angle microscopy enabled direct visualization of morphological evolution, aggregation, and packing at the interface. We show that systematic extension of the hydrocarbon arms, from four to 12 methylene groups, progressively modifies intermolecular packing, drives distinct two-dimensional aggregation pathways, and increases number densities at the air−water interface. Atomistic molecular dynamics simulations corroborate many of these experimentally observed trends and provide mechanistic detail on the cooperative roles of basket topology and interfacial concentration in regulating the hydration structure and dynamics within the cavities generated by surface-adsorbing baskets, consistent with observed variations in surface activity and packing. Our results establish how the topology of these unique supramolecules and their concentration govern interfacial organization and offer a rational framework for designing amphiphiles with predictable behavior at soft interfaces.

Hydrocarbons↗
DOE OSTI2024

Non-Equilibrium Nucleation of Rare Earth Metals at Aqueous Interfaces

We conducted mechanical and electrical perturbation experiments on several systems of NdCl 3 aqueous solutions with two phosphonic acids, one as a stable surfactant with high surface activity and another that was fully soluble in aqueous solution. We also conducted experiments with solely the salt in aqueous solution. Our goal was to stimulate surface aggregation at the air/aqueous solution interface that was observable by Brewster angle microscopy, surface tension, and/or surface spectroscopy. We observed changes only with the surface active phosphonic acid. Additional work is needed to further explore confined environments to stimulate surface aggregation events.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1967

Dielectric prisms would improve performance of quasi-optical microwave components

Properties of the Brewster angle and internal reflection in a dielectric prism are proposed as the basis of a new type of element for use in oversize waveguide in quasi-optical microwave components. Waveguide loss is reduced and precision broadband attenuators, phase shifters, and directional couplers can be constructed on the basis of the properties.

Carson, J. W.↗