Search NASA⌕ Search

SEARCH · Search NASA

Results for “Buffalo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Economic and Technical Feasibility Study of Utility-Scale Wind Generation for the New York Buffalo River and South Buffalo Brownfield Opportunity Areas

Through the RE-Powering America's Land initiative, the economic and technical feasibility of utilizing contaminated lands in the Buffalo, New York, area for utility-scale wind development is explored. The study found that there is available land, electrical infrastructure, wind resource, and local interest to support a commercial wind project; however, economies of scale and local electrical markets may need further investigation before significant investment is made into developing a wind project at the Buffalo Reuse Authority site.

17 WIND ENERGY↗

Genetic and antigenic variation of foot-and-mouth disease virus during persistent infection in naturally infected cattle and Asian buffalo in India

The role of foot-and-mouth disease virus (FMDV) persistently infected ruminants in initiating new outbreaks remains controversial, and the perceived threat posed by such animals hinders international trade in FMD-endemic countries. In this study we report longitudinal analyses of genetic and antigenic variations of FMDV serotype O/ME-SA/Ind2001d sublineage during naturally occurring, persistent infection in cattle and buffalo at an organised dairy farm in India. The proportion of animals from which FMDV RNA was recovered was not significantly different between convalescent (post-clinical) and sub-clinically infected animals or between cattle and buffalo across the sampling period. However, infectious virus was isolated from a higher proportion of buffalo samples and for a longer duration compared to cattle. Analysis of the P1 sequences from recovered viruses indicated fixation of mutations at the rate of 1.816 x 10 -2 substitution/site/year (s/s/y) (95% CI 1.362–2.31 x 10 -2 s/s/y). However, the majority of point mutations were transitional substitutions. Within individual animals, the mean dN/dS (ω) value for the P1 region varied from 0.076 to 0.357, suggesting the selection pressure acting on viral genomes differed substantially across individual animals. Statistical parsimony analysis indicated that all of the virus isolates from carrier animals originated from the outbreak virus. The antigenic relationship value as determined by 2D-VNT assay revealed fluctuation of antigenic variants within and between carrier animals during the carrier state which suggested that some carrier viruses had diverged substantially from the protection provided by the vaccine strain. This study contributes to understanding the extent of within-host and within-herd evolution that occurs during the carrier state of FMDV.

60 APPLIED LIFE SCIENCES↗

GRoW Buffalo Final Report

This document provides final reporting on the GRoW Home, University at Buffalo's entry to the 2015 Solar Decathlon competition in Irvine, CA. The report summarizes fundraising efforts, documents media outreach, lists online presence, analyzes the organizer's communication, describes post-competition life of the house and future employment plans for student team members. Last, it suggests improvements for future decathlons.

14 SOLAR ENERGY↗

Impact of burning on soil properties and respiration; Wood Buffalo National Park, Canada; June 2019

In this study, we used burn simulations on boreal forest soil under high and low moisture conditions to investigate the effect of burning on soil temperature, soil properties such as pH, total C and total C, and soil respiration. Location and site characteristic data of 19 sampling locations within Wood Buffalo National Park, Canada are included in "sampling-site-characteristics.csv". File "Temp-all-burns.csv" contains temperature data collected 2 to 9 cm below the soil surface during 2 min. heat treatment (i.e. burn simulation) and the following 5-24 hrs. Following the burn simulations, total respiration from burned and unburned soil was collected via KOH base traps for up to 6 months ("raw-conductivity-readings.csv"). The metadata file ("all-sample-metadata.csv") contains measurements of soil pH, total C, and total N of O horizon and underlying mineral soil as well as model fits for respiration data.

54 ENVIRONMENTAL SCIENCES↗

Funding Proposal for EDISON’20 Conference Buffalo, New York, 07/17 - 07/21, 2017

EDISON’20 – The 20th International Conference on Electron Dynamics in Semiconductors, Optoe- lectronics and Nanostructures – was held at the Hyatt Regency Hotel, Buffalo, NY from July 17 – 21, 2017. The technical focus of this conference was on the fundamental physics and applications of nonequilibrium classical and quantum carrier dynamics in semiconductors, optoelectronic de- vices, and nanostructures. This five-day, single-session conference featured a program consisting of some 15 invited talks, given by internationally-renowned academics from the U.S., Europe, and Japan. Their keynote presentations covered topics including: terahertz phenomena in semiconductors; quantum transport in novel two-dimensional semiconductors; topological insulators; mesoscopic phenomena in semiconductors, and; semiconductor spintronics. The invited papers were supplemented by some 30 contributed talks, selected from almost 120 abstracts submitted in response to the conference’s call for papers, and by two poster sessions that each consisted of close to 40 different reports. This critical mass in terms of scientific content ensured a highly vibrant conference, in which leaders in the field had the opportunity to interact closely with early-career scientists.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Landing performance of an air cushion landing system installed on a 1/10-scale dynamic model on the C-8 Buffalo airplane

An experimental study was conducted to evaluate the landing behavior of a 1/10-scale dynamic model of the C-8 Buffalo airplane equipped with an air-cushion landing system (ACLS) on a variety of surfaces including both calm and rough water and a smooth hard surface. Taxi runs were made on the hard surface over several obstacles. Landings were made with the model at various pitch and roll attitudes and vertical velocities and at one nominal horizontal velocity. Data from the landings include time histories of the trunk and air-cushion pressures and accelerations at selected locations on the model.

Thompson, W. C.↗

Static noise tests on augmentor wing jet STOL research aircraft (C8A Buffalo)

Results are presented for full scale ground static acoustic tests of over-area conical nozzles and a lobe nozzle installed on the Augmentor Wing Jet STOL Research Aircraft, a modified C8A Buffalo. The noise levels and spectrums of the test nozzles are compared against those of the standard conical nozzle now in use on the aircraft. Acoustic evaluations at 152 m (500 ft), 304 m (1000 ft), and 1216 m (4000 ft) are made at various engine power settings with the emphasis on approach and takeoff power. Appendix A contains the test log and propulsion calculations. Appendix B gives the original test plan, which was closely adhered to during the test. Appendix C describes the acoustic data recording and reduction systems, with calibration details.

Marrs, C. C.↗

Test of acoustic tone source and propulsion performance of C8A Buffalo suppressor nozzle

Results are presented for a static acoustic and propulsion performance ground test conducted at the Boeing hot nozzle facility on the C8A Buffalo noise suppressor nozzle. Various methods to remove a nozzle-associated 2000-Hz tone are evaluated. Results of testing this rectangular-array lobed nozzle for propulsion performance and acoustic directivity are reported. Recommendations for future nozzle modifications and further testing are included. Appendix A contains the test plan. Appendix B presents the test log. Appendix C contains plots of the one-third octave sound pressure levels recorded during the test. Appendix D describes the acoustic data recording and reduction systems. The performance data is tabulated in Appendix E.

Marrs, C. C.↗

FINAL TECHINICAL REPORT THUNDERING BUFFALO HEALTH AND WELLNESS CENTER

This U.S. Department of Energy, Office of Indian Energy supported project consists of energy conservation measures (ECMs) and a solar photovoltaic (PV) system to reduce cost of utility bills in a newly constructed Fort Peck Wellness Center, for use by tribal members in improving their physical and mental wellness. Construction of the building was outside the scope of the DOE supported project. A new 2-story wellness center was designed and constructed in Poplar, Montana. The wellness center is comprised of fitness areas, gymnasium, pool and spa, offices, and BOH support areas. The building was completed and has been operational for more than a year. A final measurement and verification of energy savings was completed after one year of operation and the results are presented herein, showing an energy savings 20% higher than the originally models indicated.

14 SOLAR ENERGY↗

Understanding Building Energy Use in the Rochester-Buffalo and Erie, PA Area: Basic Building Stock Characterization

This report is part of a publication series that focuses on approximately 100 different local geographies, or "clusters." Each report provides commercial and multifamily building characteristic and energy data for a local geography, with the intention of helping policymakers at the city, county and state levels better understand building energy use. Specifically, this report breaks down the building stock in the counties shown in Figure 1 by building type, size, energy consumption, and emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Understanding Commercial Building Energy Use in the Rochester-Buffalo and Erie, PA, Area: Building Stock Segmentation for Retrofit Planning

TThis report is part of the second phase of a publication series focusing on approximately 100 different local geographies, or "clusters." Each report provides characteristic features and energy data for commercial buildings in a specific area to help policy makers at the city, county, and state level better understand building energy use and emissions. This report breaks down the energy consumption and emissions of the building stock in the counties shown in Figure 2 by building type, building size, end use, energy consumption, emissions, and segment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Understanding Multifamily Energy Use in the Rochester-Buffalo and Erie, PA Area: Building Stock Segmentation for Retrofit Planning

This report is an addendum to a publication series that focuses on approximately 100 different local geographies, or "clusters". This addendum expands the report series to include large multifamily building characteristics as well as energy and emission data for each local geography. The intention of this addendum is to help policymakers at the city, county, and state levels better understand building energy use and emissions in large multifamily buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Radar - 449MHz - Buffalo, SD - Raw Data

Raw data captured from the NOAA ESRL website: https://www.esrl.noaa.gov/psd/data/obs/data/ Hourly Radar Winds (WwWind) and Temperature (WwTemp)

17 WIND ENERGY↗

Jet noise suppressor nozzle development for augmentor wing jet STOL research aircraft (C-8A Buffalo)

Noise and performance test results are presented for a full-scale advanced design rectangular array lobe jet suppressor nozzle (plain wall and corrugated). Flight design and installation considerations are also discussed. Noise data are presented in terms of peak PNLT (perceived noise level, tone corrected) suppression relative to the existing airplane and one-third octave-band spectra. Nozzle performance is presented in terms of velocity coefficient. Estimates of the hot thrust available during emergency (engine out) with the suppressor nozzle installed are compared with the current thrust levels produced by the round convergent nozzles.

Harkonen, D. L.↗