Search NASA⌕ Search

SEARCH · Search NASA

Results for “Buffer control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Packet router with virtual channel hop buffer control

An integrated circuit includes a network on chip (NOC) that includes a plurality of processing elements and a plurality of NOC nodes, interconnected to the plurality of processing elements. The integrated circuit includes logic that is configured to: increment by one, a virtual channel identifier to produce an incremented destination VC identifier, the virtual channel (VC) identifier associated with at least portion of a packet stored in at least one virtual channel buffer; determine that a destination virtual channel buffer corresponding to the incremented destination VC identifier in a destination NOC node in the NOC is available to store the portion of the packet; and in response to the determination, send the portion of the packet and the incremented destination VC identifier to the destination NOC node.

97 MATHEMATICS AND COMPUTING↗

Deadband Voltage Control and Power Buffering for Extreme Fast Charging Station

Voltage fluctuation is one of the most common challenges that electric vehicle charging station (EVCS) may introduce to the power grid. Local reactive power compensation (Q-compensation) capability of bi-directional electric vehicle (EV) chargers can mitigate the steady-state voltage violations caused by the EV charging itself or changes in the neighboring loads. Power buffering, using energy storage system (ESS), can be utilized to address the voltage transients (sags and swells) as a result of EV charging at the EVCS. To address PI controller’s ‘hunting’ issue, this paper proposes a Q-sign triggered deadband voltage control (V-control) method at the point of common coupling (PCC). In addition, to ensure the ramp rate of EV charging is within the allowable limits set forth by the grid code, a ramp rate control is proposed that uses the ESS as a ‘power buffer’. Lastly, different from most reported work in the literature where no explicit limit of the power electronic converters (PECs) is considered, this work considers a reasonable apparent power capacity limit of the PECs when achieving the V-control. This limit also affects the amount of active power that can be obtained from the grid, and subsequently may require ESS to function as ‘load sharing’ device to provide supplemental active power to satisfy EV load. A case study simulated in MATLAB (interfaced with PLECS) is presented to demonstrate the effectiveness of the proposed approaches for EVCS operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Seaweed-derived fucoidans and rhamnan sulfates serve as potent anti-SARS-CoV-2 agents with potential for prophylaxis

Seaweeds represent a rich source of sulfated polysaccharides with similarity to heparan sulfate, a facilitator of myriad virus host cell attachment. For this reason, attention has been drawn to their antiviral activity, including the potential for anti-SARS-CoV-2 activity. We have identified and structurally characterized several fucoidan extracts, including those from different species of brown macroalga, and a rhamnan sulfate from a green macroalga species. A high molecular weight fucoidan extracted from Saccharina japonica (FSjRPI-27), and a rhamnan sulfate extracted from Monostroma nitidum (RSMn), showed potent competitive inhibition of spike glycoprotein receptor binding to a heparin-coated SPR chip. This inhibition was also observed in cell-based assays using hACE2 HEK-293 T cells infected by pseudotyped SARS-CoV-2 virus with IC50 values <1 μg/mL. Effectiveness was demonstrated in vivo using hACE2–transgenic mice. Intranasal administration of FSjRPI-27 showed protection when dosed 6 h prior to and at infection, and then every 2 days post-infection, with 100 % survival and no toxicity at 104 plaque-forming units per mouse vs. buffer control. At 5-fold higher virus dose, FSjRPI-27 reduced mortality and yielded reduced viral titers in bronchioalveolar fluid and lung homogenates vs. buffer control. Furthermore, these findings suggest the potential application of seaweed-based sulfated polysaccharides as promising anti-SARS-CoV-2 prophylactics.

60 APPLIED LIFE SCIENCES↗

Buffer-layer-controlled nickeline vs zinc-blende/wurtzite-type MnTe growths on c -plane Al 2 O 3 substrates

In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe] m [Bi2Te 3 ] n , which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi 2 Te 3 ] n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe - nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 ± 0.04 Å and 4.39 ± 0.04 Å, respectively - can be selectively grown on c-plane Al 2 O 3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In 2 Se 3 buffer layer, despite its lattice constant (4.02 Å) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi 2 Te 3 , sharing the same lattice constant (4.39 Å) with the ZB-WZ phase, fosters the NC phase. Furthermore, these discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.

36 MATERIALS SCIENCE↗

A multigigabit link layer protocol for single picosecond latency determinism using AMD ultrascale+ GTH and GTY transreceivers

recision timing distribution systems require determin istic and repeatable high speed serial data link latency. The EIC Timing Data Link will employ a specialized link layer protocol for deterministic multigigabit communication us ing AMD Ultrascale+ GTH and GTY transceivers. Link la tency must also be measurable to accurately compensate in real time for latency variations of the physical medium. The point-to-point link is full duplex and fully synchronous with a latency control algorithm to align the internal clocks of each system with picosecond resolution. Deterministic clock domain crossing between systems is ensured using static timing analysis of the elastic buffer control signals.

43 PARTICLE ACCELERATORS↗

Ultrathin high- κ antimony oxide single crystals

Ultrathin oxides have been reported to possess excellent properties in electronic, magnetic, optical, and catalytic fields. However, the current and primary approaches toward the preparation of ultrathin oxides are only applicable to amorphous or polycrystalline oxide nanosheets or films. Here, we successfully synthesize high-quality ultrathin antimony oxide single crystals via a substrate-buffer-controlled chemical vapor deposition strategy. The as-obtained ultrathin antimony oxide single crystals exhibit high dielectric constant (~100) and large breakdown voltage (~5.7 GVm -1 ). Such a strategy can also be utilized to fabricate other ultrathin oxides, opening up an avenue in broadening the applicaitons of ultrathin oxides in many emerging fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Over 11% Efficient Eco-Friendly Kesterite Solar Cell: Effects of S-Enriched Surface of Cu2ZnSn(S,Se)4 Absorber and Band Gap Controlled (Zn,Sn)O Buffer

For high efficiency kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cell, CdS thin film was usually used as a buffer layer. However, due to the toxicity of Cd and pollution problems involved from the solution-based chemical bath deposition, eco-friendly high efficiency CZTSSe solar cell with Cd-free buffer is necessary. As an Cd-free buffer layer, we investigated (Zn,Sn)O (ZTO) film deposited by sputtering method. In order to achieve high power conversion efficiency, we controlled energy band gaps of CZTSSe absorber as well as ZTO buffer, which was required to optimize conduction band offset (CBO) between the absorber and the buffer and to increase open circuit voltage (Voc) and fill factor (FF). The CBO was optimized by controlling the band gap of ZTO. By varying the Sn/(Zn + Sn) ratio and its deposition temperature, band gap of ZTO was successfully adjusted. Experimental and computational calculation results showed that solar cell performance was strongly affected by the CBO between absorber and buffer. Besides CBO matching, larger band gap of ZTO improved short circuit current density (Jsc) with enhanced external quantum efficiency value in blue photon spectrum range. As an additional way to improve power conversion efficiency of solar cell, band graded CZTSSe absorber was developed by using spray-based two-step process. The sprayed CZTSSe film was engineered to have S-enriched surface, which makes surface band gap widened and surface passivated, and resultantly increases Voc, Jsc and fill factor (FF). By controlling band gaps of both CZTSSe absorber and ZTO buffer, we obtained 11.22% environment-friendly CZTSSe solar cell without MgF2 anti-reflection coating.

(Zn↗

Impacts of sulfonic acids on fungal manganese oxide production

Microbial manganese (Mn) oxidation plays a critical role in Mn(III/IV) oxide formation in modern day environmental systems. These oxidation processes and resulting biominerals are sensitive to aqueous conditions, such as pH and dissolved constituent concentrations. With Mn and sulfur (S) biogeochemical cycling closely linked in many environmental systems, and dissolved organic sulfur comprising a substantial pool of total sulfur in several environments, the impact of dissolved organic sulfur compounds on Mn redox processes is important to consider. Sulfonic acids, environmentally ubiquitous organosulfur compounds, play substantial roles in S cycling in many natural and contaminated systems. Research to assess the effects of these abundant sulfonic acids on Mn biogeochemical cycling, microbial Mn oxidation processes, and Mn biominerals is needed for understanding and predicting the impact of coupled S and Mn biogeochemical cycles, particularly in environments with dynamic redox gradients or in anthropogenically contaminated systems. Further, with research on microbial and abiotic Mn oxidation processes often using aminosulfonic acids to control pH, understanding the impact of such sulfonic acids on microbial Mn oxidation processes is critical. Several recent studies found that commonly used zwitterionic N substituted aminosulfonic acids, known as Good’s buffers, such as HEPES and MES, can alter abiotic birnessite sheet structures. Here we investigate the impact of two sulfonic acids with broad applications to natural and contaminated sites as well as laboratory settings (HEPES and MES) on fungal Mn oxidation relative to a carbonate buffer and a buffer-free control by three Ascomycete fungi known to oxidize Mn(II): Stagonospora sp. SRC1lsM3a, Paraphaeosphaeria sporulosa AP3s5–JAC2a, and Plectosphaerella cucumerina DS2psM2a2. Structural analyses of the products show that sulfonic acids promote Mn oxidation by P. cucumerina, producing hexagonally symmetric phyllomanganates analogous to hexagonal birnessite or c–disordered H + birnessite [(Ca,Na,K)(Mn 4+ ,Mn 3+ ,$\square$)O 2 nH 2 O], with solid–associated Mn(II) bound to vacancy sites and biomass, while in their absence almost all Mn remains as either aqueous Mn(II) or solid–associated Mn(II) bound to biomass. In contrast, sulfonic acids exert the opposite effect on Mn oxidation by P. sporulosa, with their presence suppressing Mn(II) oxidation to Mn(IV), likely leading to the formation of mycogenic bixbyite (Mn 3+ 2 O 3 ) while the buffer–free control forms a poorly crystalline phyllo- or tectomanganate. Meanwhile, all treatments exert a minimal effect on Mn(II) uptake from solution and Mn oxidation with Stagonospora sp., with all experimental systems and controls forming poorly crystalline, hexagonally symmetric phyllomanganates. The fact that the sulfonic acids here studied exert similar effects on Mn oxidation, but substantially different effects for each fungus, suggests they affect Mn oxidation via mechanistically similar pathways that are likely dependent on interactions with fungal exudates (which vary from species to species) or specific fungal Mn oxidation processes. Interestingly, for all fungi, MES increases Mn(III) in the resulting biominerals, while the carbonate buffer consistently decreases Mn(III). Further, these results clearly demonstrate that sulfonic acids not only alter Mn oxide structures, as has been previously noted in abiotic studies, but can interfere with Mn oxidation reactions themselves, highlighting the incredible sensitivity of both Mn oxide structures and the Mn oxidation process to the aqueous environment.

58 GEOSCIENCES↗

Enhanced Switching Reliability of Hf 0.5 Zr 0.5 O 2 Ferroelectric Films Induced by Interface Engineering

Ferroelectric materials have been widely researched for applications in memory and energy storage. Among these materials and benefiting from their excellent chemical compatibility with complementary metal–oxide–semiconductor (CMOS) devices, hafnia-based ferroelectric thin films hold great promise for highly scaled semiconductor memories, including nonvolatile ferroelectric capacitors and transistors. However, variation in the switched polarization of this material during field cycling and a limited understanding of the responsible mechanisms have impeded their implementation in technology. Here, we show that ferroelectric Hf 0.5 Zr 0.5 O 2 (HZO) capacitors that are nearly free of polarization “wake-up”─a gradual increase in switched polarization as a function of the number of switching cycles─can be achieved by introducing ultrathin HfO 2 buffer layers at the HZO/electrodes interface. High-resolution transmission electron microscopy (HRTEM) reveals crystallite sizes substantially greater than the film thickness for the buffer layer capacitors, indicating that the presence of the buffer layers influences the crystallization of the film (e.g., a lower ratio of nucleation rate to growth rate) during postdeposition annealing. This evidently promotes the formation of a polar orthorhombic (O) phase in the as-fabricated buffer layer samples. Synchrotron X-ray diffraction (XRD) reveals the conversion of the nonpolar tetragonal (T) phase to the polar orthorhombic (O) phase during electric field cycling in the control (no buffer) devices, consistent with the polarization wake-up observed for these capacitors. The extent of T–O transformation in the nonbuffer samples is directly dependent on the duration over which the field is applied. Here these results provide insight into the role of the HZO/electrodes interface in the performance of hafnia-based ferroelectrics and the mechanisms driving the polarization wake-up effect.

36 MATERIALS SCIENCE↗

Dynamic Modelling and Performance Evaluation of a Chemisorption Heat Pump for Cold Climate

Space heating is a significant contributor to the energy consumption in residential buildings, especially in cold climates where electric-driven heat pumps lose the advantage of high efficiency and conventional gas-combustion furnaces have limited efficiency. Chemical adsorption (chemisorption) heat pumps (CSHP) have the potential for producing heating with high energy efficiency under cold operating conditions. A CSHP operates intermittently between desorption and adsorption modes, and their performance is affected by system design and transient system control. This study developed a dynamic model and used it to evaluate the daily system performance under different designs and controls, particularly the buffer tank size and the controlled minimum heating power. The simulation results revealed the effects of these parameters on the system performance and helped identify the optimal design and control for the highest coefficient of performance and heating capacity.

Yang, Zhiyao↗

Experiments and Simulations to Describe Alkalinity Release from Particle-Containing Oil-in-Water Emulsions and Particle Suspensions

Among the most common amendments added to groundwater during site remediation are compounds used to adjust or maintain the pH. This research describes an approach to encapsulate mineral particles (MgO and CaCO 3 ) within oil droplets suspended within an aqueous phase for the purpose of delivery to the subsurface environment. A series of batch experiments was combined with mathematical modeling to illustrate the encapsulation and understand the influence of particle encapsulation on rates and extents of alkalinity release. The encapsulation of the alkalinity-releasing particles results in slower rates of amendment release as compared to rates obtained using suspensions of bare mineral particles, allowing for the possibility of control as a function of the pH. The results indicate that the alkalinity release from particle suspensions followed a mineral dissolution mechanism that could not explain the rate of the alkalinity release of the encapsulated particles. The reduction in mineral dissolution rates observed with the encapsulated particles was found to result from a mass transfer limitation. This limitation was well described using a linear driving force expression to account for the resistance to mass transfer at the oil–water interface.

EVO↗

Buffered Coordination Modulation as a Means of Controlling Crystal Morphology and Molecular Diffusion in an Anisotropic Metal-Organic Framework

We know significant advances have been made in the synthesis of chemically selective environments within metal-organic frameworks, yet materials development and industrial implementation have been hindered by the inability to predictively control crystallite size and shape. One common strategy to control crystal growth is the inclusion of coordination modulators, which are molecular species designed to compete with the linker for metal coordination during synthesis. However, these modulators can simultaneously alter the pH of the reaction solution, an effect that can also significantly influence crystal morphology. Herein, noncoordinating buffers are used to independently control reaction pH during metal-organic framework synthesis, enabling direct interrogation of the role of the coordinating species on crystal growth. We demonstrate the efficacy of this strategy in the synthesis of low-dispersity single-crystals of the framework Co 2 (dobdc) (dobdc 4- = 2,5-dioxido-1,4-benzenedicarboxylate) in a pH 7-buffered solution using cobalt(II) acetate as the metal source. Density functional theory calculations reveal that acetate competitively binds to Co during crystallization, and by using a series of cobalt(II) salts with carboxylate anions of varying coordination strength, it is possible to control crystal growth along the c -direction. Finally, we use zero length column chromatography to show that crystal morphology has a direct impact on guest diffusional path length for the industrially important hydrocarbon m -xylene. Together, these results provide molecular-level insight into the use of modulators in governing crystallite morphology and a powerful strategy for the control of molecular diffusion rates within metal-organic frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Borate and Organics on U(VI) Solubility in WIPP Brine

The solubility of uranium (VI) in Waste Isolation Pilot Plant (WIPP)-relevant brine was determined to support ongoing WIPP recertification activities. This research was performed by the Los Alamos National Laboratory Carlsbad Operations (LANL-CO) Actinide Chemistry and Repository Science Program (ACRSP). The WIPP Actinide Source Term Program (ASTP) did not develop a model for the solubility of actinides in the VI oxidation state. The solubility of UO 2 2+ , in the absence of WIPP specific data, is presently set to be equal to a conservatively high 1 mM within the WIPP Performance Assessment (PA) for all expected WIPP conditions (SOTERM, 2019) as selected at the recommendation of the Environment Protection Agency (EPA) (EPA, 2005). According to the current WIPP chemistry model assumptions and conditions, the expected pC H+ is about 9.5 and controlled by MgO buffering CO 3 2- . The goal of this study is to perform screening experiments that account for the contributions of organics and borate on uranium solubility. In this report, the solubility of U(VI) was determined at pC H+ 9 WIPP brine in the absence or presence of borate and organics at under-saturation approach. Experiments were equilibrated for about 135 days. Organic compounds present in WIPP waste can form strong complexes with actinides and can affect the oxidation states of actinides. The organic compounds addressed in WIPP performance assessment include EDTA (Ethylenediaminetetraacetic Acid), oxalate, citrate, and acetate (SOTERM, 2019). These data quantify the effects of WIPP-relevant concentrations of borate and organics effects on the solubility of U(VI) to challenge the predictions of the WIPP actinide model and inform decisions and recommendations made in the upcoming recertification of the WIPP (CRA-2024). The experiments performed were done according to the U.S. Department of Energy (DOE) approved Test Plan entitled “Experimental Strategy to Challenge Actinide Solubility Predictions” and designated LCO-ACP-26. All data reported were obtained under the LANL-CO Quality Assurance Program, which is compliant with the DOE Carlsbad Field Office, Quality Assurance Program Document (CBFO/QAPD) (QAPD, 2017).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lifetime extension of legacy CEBAF LLRF hardware

A significant portion of the Low-Level Radio Frequency (LLRF) hardware in Jefferson Lab’s CEBAF is from the original construction of the facility using 1980’s CAMAC technology. Of the fifty-three zones in CEBAF, thirty-six of them are legacy hardware. The age of the legacy system has led to difficulties in maintaining the hardware due to parts going obsolete without suitable drop in replacements. Continued operation of the legacy system is required as the installation of LLRF 3.0 systems is costly and cannot be completed in a short period of time with the available resources. The most pressing failure in the legacy system was a failing buffer card, which is responsible for communication between the EPICs network and individual RF control modules. A new buffer card was designed as a transparent, drop in, replacement so that upgrades are simply a matter of swapping the existing legacy hardware. This buffer card upgrades a single point failure component and promises to extend the operable lifetime of CEBAF’s legacy systems.

Accelerator Physics↗

A microchip microcontroller-based transducer controller for non-contact scanning probe microscopy with phase-locked loop, amplitude, and Q control

An inexpensive yet versatile transducer controller for non-contact scanning probe microscopy (SPM) based on a PIC32 microcontroller from Microchip Technology, Inc is described. In addition to feedback control using the amplitude or phase of the signal from the non-contact transducer, the controller includes a phase-locked loop for frequency-shift feedback, as well as fixed-amplitude, quality factor (Q) control, and self-excitation modes. Apart from the input amplifiers, output buffers, and the Q-control circuit, all other functions of the controller are instantiated in software on the microchip, enabling rapid changes in operating parameters if needed. The controller communicates with a host personal computer via a simple serial connection. The controller has been tested with a quartz tuning-fork transducer but can be used with any oscillating non-contact transducer.

47 OTHER INSTRUMENTATION↗

Xylose metabolic engineering of Issatchenkia orientalis for 3-hydroxypropionic acid production from cellulosic hydrolysate without nutrient supplementation

Bioconversion of lignocellulosic biomass offers a promising alternative to petroleum-based chemical production. However, inefficient xylose utilization and toxic compounds in cellulosic hydrolysate limit microbial fermentation, as the hydrolysate contains substantial amounts of xylose in addition to glucose. To address these challenges, we engineered Issatchenkia orientalis to produce 3-hydroxypropionic acid (3-HP) directly from sorghum hydrolysate under low-pH conditions. A heterologous xylose utilization pathway consisting of XYL1, XYL2, and XYL3 from Scheffersomyces stipitis was introduced into an engineered 3-HP producing strain, enabling efficient conversion of xylose to 3-HP. The engineered strain produced 46.8 g/L 3-HP from sorghum hydrolysate without nutrient supplementation. To eliminate the lag phase under low-pH conditions, fermentation was conducted at pH 6.0 for the first three days, after which pH control was discontinued and in situ 3-HP accumulation buffered the culture. This partial pH control strategy increased 3-HP productivity by 55% from 0.20 to 0.31 g/L∙h, while maintaining low-pH conditions. Introducing an additional copy of XYL2 further increased 3-HP titer to 53.5 g/L and the yield by 33%, from 0.30 to 0.40 g/g sugars, with pH reaching 4.5 at the end of fermentation. This represents one of the highest reported 3-HP titers and yields from cellulosic hydrolysate without additional nutrient supplementation. This work demonstrates a nutrient-independent and low-pH bioprocess for upgrading lignocellulosic hydrolysate into 3-HP, highlighting the industrial potential of engineered xylose-utilizing I. orientalis for sustainable production of platform chemicals from renewable feedstocks.

3-Hydroxypropionic acid↗

Optimal control to handle variations in moisture content and reactor in-feed rate

The variations in feedstock characteristics, such as moisture and particle size distribution, lead to an inconsistent flow of feedstock from the biomass pre-processing system to the reactor in-feed system. These inconsistencies result in low on-stream times at the reactor in-feed equipment. This research develops an optimal process control method for a biomass pre-processing system comprised of milling and densification operations to provide the consistent flow of feedstock to a reactor's throat. This method uses a mixed-integer optimization model to identify optimal bale sequencing, equipment in-feed rate, and buffer location and size in the biomass pre-processing system. This method, referred to as the hybrid process control (HPC), aims to maximize throughput over time. We compare HPC with a baseline feed forward process control. Our case study based on switchgrass finds that HPC reduces the variation of a reactor's feeding rate by up to 100% without increasing the operating cost of the biomass pre-processing system for biomass with moisture ranging from 10 to 25%. Additionally, HPC reduces the cost of processing biomass by 0.36%–2.22%, and reduces processing time by 0.35%-2.24%. Furthermore, a biorefinery can adapt HPC to achieve its design capacity.

09 BIOMASS FUELS↗