Search NASA⌕ Search

SEARCH · Search NASA

Results for “C-Dots”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Fluorescent of C-dot composite thin films and its properties

In the present work, we report the preparation of a fluorescent carbon nanodots (C-dots) epoxy composite thin films on a glass substrate. C-dots were prepared directly by a simple hydrothermal method using citric acid as a carbon source. The C-dots solutions were mixed with a transparent epoxy resin to form C-dot epoxy composite. Furthermore, the composite precursor was deposited on the glass substrate using a spin coating method in order to fabricate C-dot epoxy composite thin film. The transmittance intensity of C-dot composite film reached up to 90% in the visible light spectra. Using Swanopoel method, the film thickness of fabricated C-dot composite film was determined at about 1.45 μm, a value lies in a typical range needed for a wide range application. Thus, the C-dot composite film is promising in broadening applications in various fields such as energy conversion, optoelectronics, and display technology.

36 MATERIALS SCIENCE↗

Performance of photocatalyst based carbon nanodots from waste frying oil in water purification

Carbon Nanodots (C-Dots) from waste frying oil could be used as a photocatalyst in water purification with solar light irradiation. Performance of C-Dots as a photocatalyst was tested in the process of water purification with a given synthetic sewage methylene blue. The tested was also conducted by comparing the performance C-Dots made from frying oil, waste fryng oil as a photocatalyst and solution of methylene blue without photocatalyst C-Dots. Performance of C-Dots from waste frying oil were estimated by the results of absorbance spectrum. The results of measurement absorbance spectrum from the process of water purification with photocatalyst C-Dots showed that the highest intensity at a wavelength 664 nm of methylene blue decreased. The test results showed that the performance of photocatalyst C-Dots from waste frying oil was better in water purification. This estimated that number of particles C-dots is more in waste frying oil because have experieced repeated the heating process so that the higher particles concentration make the photocatalyst process more effective. The observation of the performance C-Dots from waste frying oil as a photocatalyst in the water purification processes become important invention for solving the problems of waste and water purification.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single step hydrothermal synthesis of carbon nanodot decorated V{sub 2}O{sub 5} nanobelts as hybrid conducting material for supercapacitor application

Carbon nanodot (C-dot) decorated V{sub 2}O{sub 5} (C-dot@V{sub 2}O{sub 5}) nanobelts are synthesized by single step, low cost hydrothermal route at low temperature by using V{sub 2}O{sub 5} and glucose as precursors. We have not added any extra organic solvents or surfactants which are commonly used for the preparation of different nanostructures of V{sub 2}O{sub 5}. Electron microscopy analyses demonstrate that C-dot is entrapped inside V{sub 2}O{sub 5} nanobelts which in turn enhance the conductivity and ion propagation property of this composite material. The C-dot@V{sub 2}O{sub 5} nanobelts exhibit an excellent three electrode electrochemical performance in 1 M Na{sub 2}SO{sub 4} and which showed a specific capacitance of 270 F g{sup −1} at 1 A g{sup −1}, which is ~ 4.5 times higher than the pristine V{sub 2}O{sub 5} electrode. The electrochemical energy storage capacity of this hybrid is investigated towards solid state supercapacitor application also for the first time by employing electrophoretically deposited C-dot as the counter electrode and Li based gel as the electrolyte. The hybrid material delivers an energy density of 60 W h kg{sup −1} and a reasonably high power density of 4.1 kW kg{sup −1} at 5 A g{sup −1} and good cycling stability and capacitance retention of about 87% was observed even after 5000 cycles. Above mentioned results clearly show that C-dot embedded hybrid, nanostructured transition metal oxides has great potential towards fabrication of electrodes for energy storage devices. - Highlights: • Synthesis of C-dot decorated V{sub 2}O{sub 5} by single step hydrothermal reduction method. • A specific capacitance of 270 F g{sup −1} at a current density of 1 A g{sup −1} for three electrode system. • Fabrication of solid state device by using gel electrolyte. • An energy density of 60 W h kg{sup −1} at 1 A g{sup −1} high power density of 4.1 kW kg{sup −1} at 5 A g{sup −1} for C-dot@V{sub 2}O{sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond laser-induced size reduction of carbon nanodots in solution: Effect of laser fluence, spot size, and irradiation time

Photoluminescent carbon nanodots (C-dots) with size tunability and uniformity were fabricated in polyethylene glycol (PEG{sub 200N}) solution using femtosecond laser ablation method. The size distributions and photoluminescence (PL) properties of C-dots are well controlled by adjusting the combined parameters of laser fluence, spot size, and irradiation time. The size reduction efficiency of the C-dots progressively increases with decreasing laser fluence and spot size. The optimal PL spectra are red-shifted and the quantum yields decrease with the increase in C-dots size, which could be attributed to the more complex surface functional groups attached on C-dots induced at higher laser fluence and larger spot size. Moreover, an increase in irradiation time leads to a decrease in size of C-dots, but long-time irradiation will result in the generation of complex functional groups on C-dots, subsequently the PL spectra are red-shifted.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface functionality and formation mechanisms of carbon and graphene quantum dots

Graphene quantum dots (GQDs) and Carbon dots (C-dots) have been widely studied in recent years due to their structural and optoelectrical properties. These properties have prompted the exploration of the role of these carbon-based materials in many potential applications. This includes solar cells, photodetectors, bioimaging, sensors, batteries and drug delivery. These properties and applications of GQDs and C-dots are highly dependent on their size, shape and surface functionality. In this work, GQDs and C-dots mixtures have been synthesized by an inexpensive wet chemical method by varying the synthesis temperature from 85°, 100° to 115 °C. The surface functionalities of the synthesized carbon-based materials were investigated by several analytical methods. We discovered a higher degree of oxidation at higher temperatures. The mechanism of formation of different sized GQDs and C-dots with different functionalities have been explained with the help of XPS and NEXAFS analysis. The influence of size and surface functionalities on the optical properties of these nanomaterials is analyzed by UV–Vis and PL spectroscopic techniques. Furthermore, this study demonstrates that physicochemical properties of GQDs and C-dots can be controlled by changing the synthesis temperature.

36 MATERIALS SCIENCE↗

Preliminary Collab Fracture Characterization Results from Flow and Tracer Testing Efforts

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine, where hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. Ten tracer tests were conducted to characterize fracture flow pathways during the second hydraulic characterization test for 164’ Notch (October 24th to November 14th, 2018) during steady state injection of 400 ml/min at the injection well. Injected tracers include DNA, C-dots (fluorescein nano particles), fluorescein, rhodamine-b, sodium chloride, lithium bromide and cesium iodine. The tracers have been detected in three flowing wells located about 7.5 to 9 meters away from the injection interval. The tracer breakthrough curves from these locations have been adjusted to account for the residence time in the injection and production tubing. At the time of writing this paper, only the fluorescent C-dots, rhodamine-b and chloride have been analyzed for concentration vs time/volume at the production wells. Results from early testing have been re-analyzed as to the; amount and location of injected water recovery and the mass of tracer recovered.

15 GEOTHERMAL ENERGY↗

EGS Collab Testbed 1: Tracer data tests

This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have included tracer data for C-dots, chloride, fluorescein, and rhodamine-B. The details about the tracer test can be found in Background and Methods of Tracer Tests (Mattson et al. (2019)) (also included in this package). References Mattson, E.D., Neupane, G., Plummer, M.A., Hawkins, A., Zhang, Y. and the EGS Collab Team 2019. Preliminary Collab fracture characterization results from flow and tracer testing efforts. In Proceedings 44th Workshop on Geothermal Reservoir Engineering, edited, Stanford University, Stanford, California.

15 GEOTHERMAL ENERGY↗

EGS Collab Testbed 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead, South Dakota, where hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. This file contains the second set of tracer data (also include the data uploaded previously, https://gdr.openei.org/submissions/1128) for the EGS Collab testbed. The tracer tests were conducted during October 2018 - November 2019. Injected tracers include DNA, C-dots (fluorescein nano particles), fluorescein, rhodamine-b, sodium chloride, lithium bromide and cesium iodine. The tracers have been detected in three flowing wells located about 7.5 to 9 meters away from the injection interval. The tracer breakthrough curves from these locations have been adjusted to account for the residence time in the injection and production tubing. The details about the tracer test can be found in Background and Methods of Tracer Tests (Mattson et al. (2019,a,b)) (also included in this package). References Mattson, E.D., Neupane, G., Plummer, M.A., Hawkins, A., Zhang, Y. and the EGS Collab Team 2019a. Preliminary Collab fracture characterization results from flow and tracer testing efforts. In Proceedings 44th Workshop on Geothermal Reservoir Engineering, edited, Stanford University, Stanford, California. Mattson, E.D., Neupane, G., Hawkins, A., Burghardt, J., Ingraham, M., Plummer, M., and the EGS Collab Team, 2019b. Fracture tracer injection response to pressure perturbations at an injection well. GRC Transactions, Vol. 43, 2019. Neupane, Ghanashyam, Earl Mattson, Adam Hawkins, Mitchell Plummer, and Yuran Zhang. EGS Collab Testbed 1: Tracer data sets. No. 1128. DOE Geothermal Data Repository; Idaho National Laboratory, 2019.

15 GEOTHERMAL ENERGY↗

Multimodality Imaging with Silica-Based Targeted Nanoparticle Platforms

Objectives: To synthesize and characterize a C-Dot silica-based nanoparticle containing 'clickable' groups for the subsequent attachment of targeting moieties (e.g., peptides) and multiple contrast agents (e.g., radionuclides with high specific activity) [1,2]. These new constructs will be tested in suitable tumor models in vitro and in vivo to ensure maintenance of target-specificity and high specific activity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Deep mantle viscous structure with prior estimate and satellite constraint

A radially stratified and incompressible earth model with secular variation of the second degree gravity field J-dot(2) is used here to test sensitivity of data to viscosity increases with depth and convective boundary layer structure. Prior estimates and observed nontidal J-dot(23)(-C-dot(20)) are consistent with a layered lower mantle viscosity. Details of this layering are examined by comparing predicted and observed J-dot(3), J-dot(4). Speculation that a high-velocity layer exists above D-double prime is considered. With a 650-km thick deep high-viscosity layer, the remaining lower mantle is in one of two ranges: 1.5 to 3.5 x 10 exp 20 or 3.5 to about 10 exp 22 Pa s.

Ivins, E. R.↗

Fracture Tracer Injection Response to Pressure Perturbations at an Injection Well

The EGS Collab project constructed an approximately ten-meter scale field site where fracture stimulation and flow/transport models can be validated against controlled, in-situ experiments. The first multi-well experimental site was established at the 4850 level of the Stanford Underground Research Facility (SURF) in the Homestake Mine located in South Dakota. Hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. A flow system was established in one set of fractures by injection water at approximately 400 ml/min between a set of packers 164 feet from the drift wall in the injection well through a hydraulically stimulated fracture. Injected water was recovered from five locations in 4 nearby wells. From the end of October to the middle of November of 2018, a series of fracture characterization tests were conducted using a series of 10 tracer tests (7 which used C-dot and chloride as conservative solute tracers) to assess the flow pathway in the stimulated fracture. The injected tracers were detected in three of the five water production locations where the total water recovery ranged from approximately 50 to 80% of the injected water depending on the day the test was being conducted. Analysis of a series of tracers during this two-week period suggest a large change in the flow fracture field occurred during this testing period. A comparison of the tracer breakthrough curves at the production well showed a marked decrease in the initial and peak concentration over time, whereas the OB well exhibited an increase in the initial and peak concentration arrival during this fracture characterization testing period. These changes are believed to be in response to a number of higher-pressure short-term injections at the injection well in early November (2nd to the 6th). Results of this testing suggest that the fracture flow pathways can be altered as a result of the pressure perturbations in the injection well on the integrity of adjacent monitoring wells. Results from the EGS Collab project will support the DOE Geothermal Technology Office FORGE and other EGS development efforts.

15 GEOTHERMAL ENERGY↗

Altona Field Lab Inverse Model WRR 2020

Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53, pp. 1210-1230). The data included requires MATLAB to view.

15 GEOTHERMAL ENERGY↗

EGS Collab Modeling and Simulation Working Group Teleconference Series (1-98)

This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field activities and results to the simulation teams, and 3) hold open scientific discussions on EGS topics.

15 GEOTHERMAL ENERGY↗