Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCIUM HALIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Composite materials having red emitting phosphors

A lighting apparatus includes an LED light source radiationally coupled to a composite material including a phosphor of formula I and a thermally conductive material dispersed in at least a portion of a binder material. The thermally conductive material includes a material selected from the group consisting of indium oxide, tin oxide, indium tin oxide, calcium oxide, barium oxide, strontium oxide, aluminum hydroxide, magnesium hydroxide, calcium hydroxide, barium hydroxide, strontium hydroxide, zinc hydroxide, aluminum phosphate, magnesium phosphate, calcium phosphate, barium phosphate, strontium phosphate, diamond, graphene, polyethylene nanofibers, carbon nanotubes, silver metal nanoparticles, copper metal nanoparticles, gold metal nanoparticles, aluminum metal nanoparticles, boron nitride, silicon nitride, an alkali metal halide, calcium fluoride, magnesium fluoride, a compound of formula II, and combinations thereof.

Porob, Digamber Gurudas↗

Hydrothermal Formation Of Hemi-hydrate Calcium Sulfate Whiskers In The Presence Of Additives

The influence of addictives on the hydrothermal formation of hemi-hydrate calcium sulfate (CaSO{sub 4{center_dot}}0.5H{sub 2}O) whiskers were discussed in this paper, using CaCl{sub 2} and Na{sub 2}SO{sub 4} as the reactants. The presence of NaCl, CaCl{sub 2} or Na{sub 2}SO{sub 4} increased the concentrations of Ca{sup 2+} and SO{sub 4}{sup 2-}, leading to the formation of CaSO{sub 4{center_dot}}0.5H{sub 2}O whiskers with aspect ratio lower than 50. The one dimensional growth of CaSO{sub 4{center_dot}}0.5H{sub 2}O whiskers was enhanced in water with no additives owing to the low super-saturation, leading to the formation of uniform whiskers with a length of 200-2000 {mu}m and an aspect ratio higher than 100.

36 MATERIALS SCIENCE↗

Study of Double Beta Decay of {sup 48}Ca by CANDLES

CANDLES is the project to search for neutrino-less double beta decay (0nubetabeta) of {sup 48}Ca. The observation of 0nubetabeta will prove existence of a massive Majorana neutrino. We have developed the new detector system CANDLES which features CaF{sub 2}(pure) scintillators. Here expected performances of the system for background rejection are presented. It is also described current status of development for the detector system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sorption and desorption properties of a CaH{sub 2}/MgB{sub 2}/CaF{sub 2} reactive hydride composite as potential hydrogen storage material

The hydrogenation behavior of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} composite was studied by manometric measurements, powder X-ray diffraction, differential scanning calorimetry and attenuated total reflection infrared spectroscopy. The maximum observed quantity of hydrogen loaded in the composite was 7.0 wt%. X-ray diffraction showed the formation of Ca(BH{sub 4}){sub 2} and MgH{sub 2} after hydrogenation. The activation energy for the dehydrogenation reaction was evaluated by DSC measurements and turns out to be 162{+-}15 kJ mol{sup -1} H{sub 2}. This value decreases due to cycling to 116{+-}5 kJ mol{sup -1} H{sub 2} for the third dehydrogenation step. A decrease of ca. 25-50 deg. C in dehydrogenation temperature was observed with cycling. Due to its high capacity and reversibility, this composite is a promising candidate as a potential hydrogen storage material. - Graphical abstract: PCI of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} reactive hydride composite at 325 deg. C and 350 deg. C. Open marks: dehydrogenation, closed marks: hydrogenation. Highlights: > The hydrogenation and dehydrogenation behavior of CaF{sub 2} doped CaH{sub 2}/MgB{sub 2} RHC is presented. > The new composite presents a superior hydrogen uptake compared with the non-doped composite.. > A reduction in the E{sub a} and the dehydrogenation temperature was observed by CaF{sub 2} doping and cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical properties and leaching modeling of activated incinerator bottom ash in Portland cement blends

In the present study the evolution of mechanical strength and the leaching behavior of major and trace elements from activated incinerator bottom ash/Portland cement mixtures were investigated. Chemical and mechanical activation were applied with the purpose of improving the reactivity of bottom ash in cement blends. Chemical activation made use of NaOH, KOH, CaCl{sub 2} or CaSO{sub 4}, which were selected for the experimental campaign on the basis of the results from previous studies. The results indicated that CaCl{sub 2} exhibited by far the best effects on the evolution of the hydration process in the mixtures; a positive effect on mechanical strength was also observed when CaSO{sub 4} was used as the activator, while the gain in strength produced by KOH and NaOH was irrelevant. Geochemical modeling of the leaching solutions provided information on the mineral phases responsible for the release of major elements from the hardened materials and also indicated the important role played by surface sorption onto amorphous Fe and Al minerals in dictating the leaching of Pb. The leaching of the other trace metal cations investigated (Cu, Ni and Zn) could not be explained by any pure mineral included in the thermodynamic database used, suggesting they were present in the materials in the form of complex minerals or phase assemblages for which no consistent thermodynamic data are presently available in the literature.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Low radioactivity CaF{sub 2} scintillator crystals for CANDLES

CANDLES is the project to search for neutrinoless double beta (0{nu}{beta}{beta}) decay of {sup 48}Ca by using CaF{sub 2} scintillators. The observation of 0{nu}{beta}{beta} decay will prove the existence of massive Majorana neutrinos. Expected performances and current status of the CANDLES system are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nano-Hydroxyapatite/Fluoridated and Unfluoridated Bioactive Glass Composites: Structural Analysis and Bioactivity Evaluation

Biphasic bioceramic composites containing nano-hydroxyapatite (HAP) and nanosized bioactive glasses have been prepared in the form of pellets and have been examined for the effects of bioglass concentrations and sintering temperature on the structural transformations and bioactivity behavior. Pure stoichiometric nano-HAP was synthesized using sol-gel technique. Two bioglasses synthesized in this work--fluoridated bioglass (Cao-P{sub 2}O{sub 5}-Na{sub 2}O{sub 3}-CaF{sub 2}) and unfluoridated bioglass (Cao-P{sub 2}O{sub 5}-Na{sub 2}O{sub 3}) designated as FBG and UFBG respectively, were added to nano-HAP with concentrations of 5, 10, 12 and 15%. The average particle sizes of synthesized HAP and bioglasses were 23 nm and 35 nm, respectively. The pellets were sintered at four different temperatures i.e. 1000 deg. C, 1150 deg. C, 1250 deg. C and 1350 deg. C. The investigations involved study of structural and bioactivity behavior of green and sintered pellets and their deviations from original materials i.e. HAP, FBG and UFBG, using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The phase composition of the sintered pellets was found to be non-stoichiometric HAP with {alpha}-TCP (tricalcium phosphate) and {beta}-TCP. It was revealed from SEM images that bonding mechanism was mainly solid state sintering for all pellets sintered at 1000 deg. C and 1150 deg. C and also for pellets with lower concentrations of bioglass i.e. 5% and 10% sintered at 1250 deg. C. Partly liquid phase sintering was observed for pellets with higher bioglass concentrations of 12% and 15% sintered at 1250 deg. C and same behaviour was noted for pellets at all concentrations of bioglasses at 1350 deg. C. The sintered density, hardness and compression strength of pellets have been influenced both by the concentration of the bioglasses and sintering temperature. It was observed that the biological HAP layer formation was faster on the green pellets surface than on pure HAP and sintered pellets, showing higher bioactivity in the green pellets.

36 MATERIALS SCIENCE↗

Crystal structure of Kuzel's salt 3CaO.Al{sub 2}O{sub 3}.1/2CaSO{sub 4}.1/2CaCl{sub 2}.11H{sub 2}O determined by synchrotron powder diffraction

The crystal structure of Kuzel's salt has been successfully determined by synchrotron powder diffraction. It crystallizes in the rhombohedral R3-bar symmetry with a = 5.7508 (2) A, c = 50.418 (3) A, V = 1444.04 (11) A{sup 3}. Joint Rietveld refinement was realized using three X-ray powder patterns recorded with a unique wavelength and three different sample-to-detector distances. Kuzel's salt is the chloro-sulfoaluminate AFm phase and belongs to the layered double hydroxide (LDH) large family. Its structure is composed of positively charged main layer [Ca{sub 2}Al(OH){sub 6}]{sup +} and negatively charged interlayer [Cl{sub 0.50}.(SO{sub 4}){sub 0.25}.2.5H{sub 2}O]{sup -}. Chloride and sulfate anions are ordered into two independent crystallographic sites and fill successive interlayer leading to the formation of a second-stage compound. The two kinds of interlayer have the compositions [Cl.2H{sub 2}O]{sup -} and [(SO{sub 4}){sub 0.5}.3H{sub 2}O]{sup -}. The crystal structure explains why chloride and sulfate anions are not substituted and why the formation of extended solid solution in the chloro-sulfate AFm system does not occur.

36 MATERIALS SCIENCE↗

Rare-Earths Centers (Sm{sup 3+}, Eu{sup 3+}, Yb{sup 3+}) in MeF{sub 2}(Me = Ca, Sr, Ba, Cd) Crystals

Rare-earth elements RE{sup 3+}(RE = Sm, Eu, Yb) form impurity centers in fluorite-like crystals MeF{sub 2}(Me = Ca, Sr, Ba, Cd). The crystal structure of cubic, trigonal and tetragonal centers in MeF{sub 2} has been investigated in the framework of shell model and pair potential approximation. The crystal field parameters were calculated with the exchange charges model, using the optimized geometry of the doped host matrix. With these parameters we have been calculated the optical spectra and spin-Hamiltonian (g-factors) of RE{sup 3+} in MeF{sub 2}, for some combination of R{sup 3+} and MeF{sup 2}. The obtained results were discussed and comparison with experimental data was made. A good agreement confirms the method and model of calculations.

36 MATERIALS SCIENCE↗

Catalytic conversion of cellulose to fuels and chemicals using boronic acids

Methods and catalyst compositions for formation of furans from carbohydrates. A carbohydrate substrate is heating in the presence of a 2-substituted phenylboronic acid (or salt or hydrate thereof) and optionally a magnesium or calcium halide salt. The reaction is carried out in a polar aprotic solvent other than an ionic liquid, an ionic liquid or a mixture thereof. Additional of a selected amount of water to the reaction can enhance the yield of furans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Converting Wind Energy to Ammonia at Lower Pressure

Renewable wind energy can be used to make ammonia. However, wind-generated ammonia costs about twice that made from a traditional fossil-fuel driven process. To reduce the production cost, we replace the conventional ammonia condensation with a selective absorber containing metal halides, e.g., calcium chloride, operating at near synthesis temperatures. With this reaction-absorption process, ammonia can be synthesized at 20 bar from air, water, and wind-generated electricity, with rates comparable to the conventional process running at 150–300 bar. In our reaction-absorption process, the rate of ammonia synthesis is now controlled not by the chemical reaction but largely by the pump used to recycle the unreacted gases. The results suggest an alternative route to distributed ammonia manufacture which can locally supply nitrogen fertilizer and also a method to capture stranded wind energy as a carbon-neutral liquid fuel.

10 SYNTHETIC FUELS↗

A comparative structural study of wet and dried ettringite

Two different techniques were used to compare structural characteristics of 'wet' ettringite (stored in the synthesis mother liquid) and 'dried' ettringite (dried to 35% relative humidity over saturated CaCl{sub 2} solution). Lattice parameters and the water content in the channel region of the structure (site occupancy factor of the water molecule not bonded to cations) as well as microstructure parameters (size and strain) were determined from a Rietveld refinement on synchrotron powder diffraction data. Local environment of sulphate anions and of the hydrogen bonding network was characterized by Raman spectroscopy. Both techniques led to the same conclusion: the 'wet' ettringite sample immersed in the mother solution from the synthesis presents similar structural features as ettringite dried to 35% relative humidity. An increase of the a lattice parameter combined with a decrease of the c lattice parameter occurs on drying. The amount of structural water, the point symmetry of sulphate and the hydrogen bond network are unchanged when passing from the wet to the dried ettringite powder. Ettringite does not form a high-hydrate polymorph in equilibrium with alkaline solution, in contrast to the AFm phases that lose water molecules on drying. According to these results we conclude that ettringite precipitated in aqueous solution at the early hydration stages is of the same chemical composition as ettringite present in the hardening concrete.

36 MATERIALS SCIENCE↗

Early age strength enhancement of blended cement systems by CaCl{sub 2} and diethanol-isopropanolamine

The enhancement of the 1 day strength of cementitious systems by a combination of calcium chloride (CaCl{sub 2}) and diethanol-isopropanolamine (DEIPA) was studied, particularly in blended cement systems. A combination of quantitative X-ray diffraction with Rietveld refinement (QXRD), scanning electron microscopy (SEM)/backscattered electron image analysis, thermogravimetric analysis (TGA), and isothermal calorimetry were used to investigate the mechanism of strength enhancement by the additives. The additives were found to increase the early age mortar strength by enhancing the cement hydration, with the DEIPA enhancing primarily the aluminate hydration. DEIPA also affected the morphology of portlandite which was formed as thin plates. In parallel, the calcium-to-silica ratio of the C-S-H was found to increase with the use of DEIPA, possibly because of the inclusion of microcrystalline portlandite. After 48 h DEIPA was found to directly enhance the rate of reaction of granulated blast-furnace slag and fly ash.

36 MATERIALS SCIENCE↗

Thermal transformation of quaternary compounds in NaF-CaF{sub 2}-AlF{sub 3} system

Details of quaternary compounds formation in the system NaF-CaF{sub 2}-AlF{sub 3} are specified. To achieve this aim, the samples of phases NaCaAlF{sub 6} and Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14} have been obtained by high-temperature solid-phase synthesis. Their thermal behavior when heated up to 800 deg. C has been studied using the methods of high-temperature X-ray diffraction (XRD) and thermal analysis (TA). The system under consideration can be regarded as a quasibinary section CaF{sub 2}-NaAlF{sub 4}, where at T=745-750 deg. C invariant equilibrium is implemented with the phases CaF{sub 2}-NaCaAlF{sub 6}-Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14}-(liquid melt)-(NaAlF{sub 4}). The peculiarity of the equilibrium is NaAlF{sub 4} metastability at normal pressure. Below the equilibrium temperature the quaternary phase Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14} is stable and NaCaAlF{sub 6} above this temperature. The phase NaCaAlF{sub 6} fixed by rapid quenching from high temperatures and when heated up to 640 deg. C decomposes, yielding Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14}. Further heating in vacuum at temperature up to 740 deg. C results in decomposition of Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14} into CaF{sub 2} and Na{sub 3}AlF{sub 6}. The expected reverse transformation of Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14} into NaCaAlF{sub 6} has not been observed under experimental conditions. Transformations in bulk samples reveal direct and reverse transformation of quaternary phases. Synopsis: Thermal transformation of the quaternary compounds in system (NaF-CaF{sub 2}-AlF{sub 3}) was investigated using high-temperature X-ray diffraction (XRD) and thermal analysis (TA). In the system the invariant equilibrium is implemented with the phases CaF{sub 2}-NaCaAlF{sub 6}-Na{sub 2}Ca{sub 3}Al{sub 2}F{sub 14}-(liquid melt)-(NaAlF{sub 4}) at T=745-750 deg. C. - Graphical Abstract: The paper concerns of a small piece of the ternary system (NaF-CaF{sub 2}-AlF{sub 3}) which is very important for aluminum production. Details of phase relations were not fully understand up till now because of experimental difficulties: aggressive reagents and high temperature. However, the phase diagram is very important for production control.

36 MATERIALS SCIENCE↗

NaAlF{sub 4}: Preparation, crystal structure and thermal stability

The compound NaAlF{sub 4} has been obtained in the form of thin fibrous crystals or fine colorless powder by condensation at 18 deg. C of vapors arising over chiolite Na{sub 5}Al{sub 3}F{sub 14} or NaCaAlF{sub 6}, heated up to 800 deg. C. Thermal stability has been investigated by the methods of thermal analysis and high temperature X-ray diffraction. When heated in air, NaAlF{sub 4} is stable up to 390-400 deg. C, then there is an exothermal solid state decay into Na{sub 5}Al{sub 3}F{sub 14}(s) and AlF{sub 3}(s). At higher temperature Na{sub 5}Al{sub 3}F{sub 14}(s) decays into Na{sub 3}AlF{sub 6}(s) and NaAlF{sub 4}(g). The crystal structure (space group Cmcm, a=3.6124(1) A, b=14.9469(7) A, c=5.2617(3) A, V=284.10 A{sup 3}) has been determined by X-ray powder diffraction method. In the crystal structure of NaAlF{sub 4} the octahedrons [AlF{sub 6}] are joined through vertices and form corrugated layers, sodium ion layers being located between them. The distances between the atoms of Al-F are in the range 1.791-1.814 A, and those for Na...F are in the range 2.297-2.439 A. In spite of limited thermal stability of the crystal form, the compound NaAlF{sub 4} is the main component of the gas mixture over solid and molten salts in the ternary system NaF-AlF{sub 3}-CaF{sub 2} and participates in chemical transformations between the phases at high temperature. - Graphical abstract: The compound NaAlF{sub 4} was for the first time described 55 years ago, but until now it was not properly studied. Meantime the phase is responsible for the most low-melting part of the NaF-AlF{sub 3} system, which is the great importance for the aluminum production. The lack of information about NaAlF{sub 4} is due to narrow interval of stability which is close to liquid part of the system.

36 MATERIALS SCIENCE↗

Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}C}l{sub 2}: A new n=3 Ruddlesden-Popper oxychloride

Solid state solutions of Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}C}l{sub 2} (0.92{<=}x{<=}1.79 ({delta}{approx}0.1) single crystals were synthesized in CaCl{sub 2}-flux in air. The structure, determined by single-crystal X-ray diffraction, is related to the n=3 Ruddlesden-Popper phase in space group I4/mmm with strong deviations from the ideal structure. Mn and Fe are disordered over two transition metal sites. Due to the positional disordering of the equatorial oxygen atoms in the MO{sub 6} octahedra in Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}C}l{sub 2} both tilting ({approx}9{sup o}) along the c-axis and rotation ({approx}10.5{sup o}) within the ab-plane are observed. All the Fe ions are trivalent, as confirmed by {sup 57}Fe Moessbauer spectroscopy and X-ray absorption near edge spectroscopy (XAS), while the formal valence state of Mn varies from very close to 4+ in the x=0.92 to mix-valent 3+/4+ in the x=1.79 member, as indicated by XAS. Magnetic investigations evidence short-range antiferromagnetic ordering already at room temperature and spin-glass behavior at low temperature due to the structural disordering of Mn/Fe. - Graphical abstract: Structural analysis by the X-ray diffraction, the {sup 57}Fe Moessbauer and the X-ray absorption spectroscopy shows that all Fe ions are trivalent, the valence of Mn varies from {approx}4+ to 3+/4+ with increasing x.

36 MATERIALS SCIENCE↗

Limitations for heavy metal release during thermo-chemical treatment of sewage sludge ash

Phosphate recycling from sewage sludge can be achieved by heavy metal removal from sewage sludge ash (SSA) producing a fertilizer product: mixing SSA with chloride and treating this mixture (eventually after granulation) in a rotary kiln at 1000 {+-} 100 deg. C leads to the formation of volatile heavy metal compounds that evaporate and to P-phases with high bio-availability. Due to economical and ecological reasons, it is necessary to reduce the energy consumption of this technology. Generally, fluidized bed reactors are characterized by high heat and mass transfer and thus promise the saving of energy. Therefore, a rotary reactor and a fluidized bed reactor (both laboratory-scale and operated in batch mode) are used for the treatment of granulates containing SSA and CaCl{sub 2}. Treatment temperature, residence time and - in case of the fluidized bed reactor - superficial velocity are varied between 800 and 900 deg. C, 10 and 30 min and 3.4 and 4.6 m s{sup -1}. Cd and Pb can be removed well (>95 %) in all experiments. Cu removal ranges from 25% to 84%, for Zn 75-90% are realized. The amount of heavy metals removed increases with increasing temperature and residence time which is most pronounced for Cu. In the pellet, three major reactions occur: formation of HCl and Cl{sub 2} from CaCl{sub 2}; diffusion and reaction of these gases with heavy metal compounds; side reactions from heavy metal compounds with matrix material. Although, heat and mass transfer are higher in the fluidized bed reactor, Pb and Zn removal is slightly better in the rotary reactor. This is due the accelerated migration of formed HCl and Cl{sub 2} out of the pellets into the reactor atmosphere. Cu is apparently limited by the diffusion of its chloride thus the removal is higher in the fluidized bed unit.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Kinetics of thermal de-chlorination of PVC under pyrolytic conditions

Highlights: Black-Right-Pointing-Pointer Several tests were performed in DTA/TGA for understanding the thermal behavior of pure PVC. Black-Right-Pointing-Pointer We did a kinetic model for the de-chlorination of PVC molecule. Black-Right-Pointing-Pointer A temperature of 340 Degree-Sign C was defined as the optimum temperature for breaking the bond of chlorine in the PVC molecule. Black-Right-Pointing-Pointer The experimental validation of this temperature, led to a removal rate of 99.9% chlorine. - Abstract: Although PVC-containing wastes are an important potential source of energy they are frequently disposed in landfill. In thermal treatment processes such as pyrolysis and gasification, the presence of poly(vinyl chloride) (PVC), a compound with 56.7% of chlorine, may cause problems concerned with environmental protection, as consequence of the formation of hydrochloric acid, chlorine gas and dioxins, as well as corrosion phenomena of the reactor/equipment materials. Thus, a possible solution may involve a previous removal of the chlorine from PVC containing waste through a pyrolysis process at low temperatures before the material being submitted to a subsequent thermal treatment, for energetic valorization. In this work, a kinetic model for the thermal decomposition of PVC has been developed, in view of its de-chlorination. DTA/TGA testing at different temperatures indicated a first order reaction and an activation energy of 133,800 J/mol. An almost completed de-chlorination reaction was obtained at 340 Degree-Sign C under an inert atmosphere. The resulted material is a C{sub n}H{sub n} type polymer with potential to be used in an energy recovery process. Validation test performed at laboratory scale indicate that the temperature of 340 Degree-Sign C enables the removal of {approx}99.9% of the chlorine present in PVC. The chloride can be fixed in the form of an aqueous solution of HCl or calcium chloride, driving to an alternative full process with environmental benefits and reduction of the costs associated to the PCV - containing materials/wastes management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗