Measurement of the U 235 Neutron Capture-to-Fission Ratio, α , for Incident Neutron Energies from 3.25 eV to 1.8 keV
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Abstract Not Provided
Capture-to-fission cross section ratios are used as an alternative to absolute cross section measurements. This is due to the simplification on the calculations and the reduction of the uncertainties with respect to an absolute measurement of the cross section by eliminating experimental complications like self-absorption, beam/target overlap and non-uniformities. Different capture-to-fission reactions have been measured through the years at the Los Alamos Neutron Science Center (LANSCE) at Los Alamos National Laboratory (LANL) using the Detector for Advanced Neutron Capture Experiments (DANCE) combined with different fission detectors. Some of these are a Parallel Plate Avalanche Counter (PPAC) to detect fission fragments (FF), and the NEUtron detector array at DANCE (NEUANCE) to detect fission neutrons. As DANCE detects the γ-rays produced in capture and fission reactions, the fission instrument placed inside the DANCE cavity is used to tag the fission γ-rays for background identification and subtraction. Some examples of capture-to-fission ratio measurements performed with DANCE in the last years are the 233 U, 235 U and 239 Pu. The measurement technique, the different setups, and other potential applications of the instruments will be explained.
This presentation finds that new measurement at LANSCE combining DANCE and NEUANCE at the end of 2020 and 2021. Additionally, two samples of 10 mg and 20 mg of 233 U have been prepared at LANL by Evelyn M. Bond (December 2020). Data analysis has been finished and results of the capture-to-fission ratio on 233 U in the neutron energy region from 0.7 eV to 250 keV have been provided. The focus was to provide data from 1-300 keV. We are providing data from 0.7 eV to 1 keV in addition. The result has been normalized to the ENDF/B-VIII.0 broadened capture-to-fission cross section ratio in the neutron energy region recommended by the Luiz Leal and Marco Pigni, between 8.1 and 14.7 eV. This is the first measurement of the capture-to-fission ratio between 2 - 30 keV. The data show some small differences in the RRR with the evaluation though the general trend is consistent. In the URR this data shows a smaller capture-to-fission ratio than the evaluation from 10 to 150 keV
Not Available
This presentation covers fiscal year 2022 for Nuclear Criticality Safety Program (NCSP) accomplishments for Uranium (U) and Plutonium (Pu) evaluations. This presentation includes an overview on plutonium and uranium. Additionally, this presentation covers the inclusion of sub-thermal data for 235 U and the inclusion of LANL ratio capture-to-fission data for 233 U and 235 Pu. The presentation ends with a discussion on 239 Pu Primary fit of Mosby's data as reported and a look at the uncertainty quantification.
With the rapid development of computational power and parallel algorithms, Monte Carlo method has been widely investigated and used in neutron transport simulations due to its advantages in geometry modelling and usage of continuous energy point-wise cross sections. Nowadays the road has been paved to couple Monte Carlo codes with thermal-hydraulics codes to make multi-physics calculations. One of the most important aspects of thermal-hydraulics feedback is the detailed temperature distribution, which demands temperature dependent cross sections in neutron transport simulations. The conventional pre-generated cross section libraries at each temperature point are no longer feasible for detailed temperature distributions because of tremendous memory footprint. Hence, different on-the-fly Doppler broadening methods have been proposed for resolved resonance energy region and thermal energy region, such as the interpolation, regress model fitting, multipole representation (MPR), target motion sampling (TMS) and different integration algorithms based on Doppler broadening equation. Compared to resolved resonance energy region and thermal energy region, the representation of cross sections in unresolved resonance region is slightly different. As a result of the limitation of experiment measurements, the overlapped resonances cannot be distinguished from each other and the statistic average resonance parameters are given in the evaluated nuclear data file. In early applications, infinite-dilute pointwise cross sections were obtained from average parameters and were directly used in neutron simulations. However, it was proven that these infinite-dilute pointwise cross sections cannot capture the energy self-shielding effect, thus leading to an overestimate of reaction rates and usually an underestimate of k{sub eff} owing to the increased absorption rates and increased scattering probability to energy below unresolved resonance region where the capture-to-fission ratio is typically higher. This phenomenon is of great importance especially for problems where there is a considerable flux in unresolved resonance region. Then the probability table method was put forward by Levitt to take energy self-shielding effect into account, which provides probability distribution function of cross sections in unresolved resonance region instead of specific cross section values. The probability distribution function is presented in the form of tables and the mean values are equal to the infinite dilution cross sections. To obtain the temperature dependent cross sections in unresolved energy region, there are two different methods. One is to calculate cross sections directly from average resonance parameters and their statistical distributions , which is effective and precise but time-consuming. The other is to interpolate between pre-generated probability table files, which is much more efficient. In this paper, on-the-fly Doppler broadening of cross sections in unresolved resonance regions based on probability tables interpolation was implemented in RMC codes as a supplement to on-the-fly Doppler broadening for resolved resonance energy region and thermal region, which is based on the integration of Doppler broadening equation. The results of criticality calculation and depletion calculation show that on-the-fly Doppler broadening for the whole energy region is accurate and efficient. (authors)
The neutron-induced reaction cross sections of 242m Am were measured at the Los Alamos Neutron Science Center using the Detector for Advanced Neutron-Capture Experiments array along with a compact parallel-plate avalanche counter for fission-fragment detection. A new neutron-capture cross section was determined, and the absolute scale was set according to a concurrent measurement of the well-known 242m Am(n,f) cross section. The (n,γ) cross section was measured from thermal energy to an incident energy of 1 eV at which point the data quality was limited by the reaction yield in the laboratory. Our new 242m Am fission cross section was normalized to ENDF/B-VII.1 to set the absolute scale, and it agreed well with the (n,f) cross section from thermal energy to 1 keV. Lastly, the average absolute capture-to-fission ratio was determined from thermal energy to E n = 0.1 eV, and it was found to be 26(4)% as opposed to the ratio of 19% from the ENDF/B-VII.1 evaluation.
This presentation provides overviews of uraniums, 233 U and 235 U, plutonium research including motivations, current status in ENDF/B-VIII.0, the inclusion of sub-thermal data, and the inclusion of LANL ratio capture-to-fission data. Additionally, the preliminary fit of Mosby’s data as reported, fluctuating neutron multiplicities, uncertainty in evaluated libraries, and experimental effects are also presented. The presentation concludes by providing a summary of plans for the U and Pu evaluation work.
This presentation shows current status of in ENDF/B-VIII.0 and ENDF/B-VIII.0β 1 Pu evaluations. With a focus on the Pu thermal solutions (PST) and sanity check on fast metal assemblies (PMF). Pu ENDFβ 1 file in the low-energy region included updates in RRR (up to 2.5 keV), TNC and PFNS. Discussed are improvements over ENDF/B-VIII.0 in the C/E benchmarks (PST 81 cases) with preliminary ν p and cross section covariance generation for the resolved resonance energy range up to 2.25 keV. Highlighted are proposed updates for ENDFβ 2 with an extension of the RRR evaluation up to 5 keV, inclusion of Mosby’s data including proper resolution function (thanks to Marian J.), and a particular focus on η energy dependence from thermal up to 10 eV with the impact of the capture-to-fission ratio at 0.29 eV. This presentation concludes with an updated ν p and cross section covariance generation for the resolved resonance energy range up to 5 keV. And additional validation to test performance at about 2 eV and in the keV region.
The TSUNAMI (Tools for Sensitivity and Uncertainty Analysis Methodology Implementation) capabilities within the SCALE code system leverage sensitivity coefficients for many criticality safety applications, including quantifying the data-induced uncertainty in the eigenvalue of critical systems, quantifying computational biases, and selecting applicable benchmark experiments. TSUNAMI sensitivity and uncertainty analysis tools have traditionally been limited to criticality safety application spaces, but the introduction of Generalized Perturbation Theory (GPT) sensitivity methods by Jessee in 2009 and Perfetti in 2013 has extended the scope of SCALE adjoint-weighted sensitivity and uncertainty analysis to include reactor physics applications. The continuous-energy (CE) TSUNAMI-3D GPT sensitivity analysis methods were originally developed to calculate sensitivity coefficients for a limited number of reaction-rate responses using CE Monte Carlo methods. These tools were recently applied in an Oak Ridge National Laboratory (ORNL)-directed research and development project to improve the efficiency of {sup 252}Cf production in the High Flux Isotope Reactor (HFIR) by understanding the sensitivity of key heavy actinide capture-to- fission ratios to potential system design changes. This work further extends the applicability of the CE TSUNAMI- 3D GPT methods to reactor physics applications by enabling the calculation of sensitivity coefficients for an expanded set of reaction rate responses-including a first-ever capability for conducting sensitivity analysis of neutron diffusion coefficients.