Search NASA⌕ Search

SEARCH · Search NASA

Results for “CIRCULAR CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Propagation of a stable gaseous detonation in a circular arc configuration

Here, we examine numerically the effect that detonation wavefront curvature has on gaseous detonation cellular structure in a circular arc geometry with rigid walls. For the model considered, a planar detonation is weakly unstable. The detonation curvature is induced by diffraction and flow divergence as the wave sweeps around the arc. We examine the effect of arc thickness, inner arc radius and activation energy on the cellular pattern. A combination of pseudo-Schlieren, pseudo-soot foil records and detonation shock and sonic flow loci are used to explore the observed detonation structures. We find that for sufficiently wide arcs, the detonation wavefront curvature renders the detonation hydrodynamically stable, i.e. laminar flow with no cells. The stable configuration consists of a broadly curved wave originating from the inner arc surface, which is typically connected to the outer arc boundary by a stable Mach stem. The stable detonation is driven by a small region of subsonic flow attached to the inner arc surface, outside of which the flow is supersonic. The initiation dynamics of a stable propagating wave case are explored. The evolution dynamics between an unstable (cellular) and stable arc thickness are also examined. Finally, smaller inner arc radii and lower activation energies increase the range of stable solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimum Multinozzle Configuration for Minimizing the Rayleigh Integral During High-Frequency Transverse Instabilities

This paper develops a formalism for optimizing nozzle location/configuration with respect to combustion stability of high-frequency transverse modes in a can combustor. The stability of these acoustically noncompact flames was assessed using the Rayleigh integral (RI). Several key control parameters influence RI—flame angle, swirling strength, nozzle location, as well as nozzle location with respect to the acoustic mode shape. In this study, we consider a N-around-1 configuration such as typically used in a multi-nozzle can system and study the overall stability of this system for different natural transverse modes. Typically, such nozzles are distributed in a uniformly circular manner for which we study the overall RI, and for cases where RI > 0, we optimize the nozzle distribution that can reduce and minimize RI. For a fixed geometry such as a circular configuration, the analysis shows how the flame's parameters must vary across the different nozzles, to result in a relatively stable system. Additionally, for a fixed set of flame parameters, the analysis also indicates the noncircular distribution of the N nozzles that minimizes RI. Overall, the analysis aims to provide insights on designing nozzle locations around the center nozzle for minimal amplification of a given transverse mode.

42 ENGINEERING↗

Study on effect of geometrical configuration of radioactive source material to the radiation intensity of betavoltaic nuclear battery

Nuclear batteries have strategic applications and very high economic potential. One Important problem in application of nuclear betavoltaic battery is its low efficiency. Current efficiency of betavoltaic nuclear battery reaches only arround 2%. One aspect that can influence the efficiency of betavoltaic nuclear battery is the geometrical configuration of radioactive source. In this study we discuss the effect of geometrical configuration of radioactive source material to the radiation intensity in betavoltaic nuclear battery system. received by the detector. By obtaining the optimum configurations, the optimum usage of radioactive materials can be determined. Various geometrical configurations of radioactive source material are simulated. It is obtained that usage of radioactive source will be optimum for circular configuration.

30 DIRECT ENERGY CONVERSION↗

Combustor with non-circular head end

The present application provides a combustor for use with a gas turbine engine. The combustor may include a head end with a non-circular configuration, a number of fuel nozzles positioned about the head end, and a transition piece extending downstream of the head end.

33 ADVANCED PROPULSION SYSTEMS↗

Toroidal configurations of perfect fluid in the Reissner-Nordström-(anti-)de Sitter spacetimes

Influence of cosmological constant on toroidal fluid configurations around charged spherically symmetric black holes and naked singularities is demostrated by study of perfect-fluid tori with uniform distribution of specific angular momentum orbiting in the Reissner-Nordström-(anti-)de Sitter spacetimes. Toroidal configurations are allowed only in the spacetimes admitting existence of stable circular geodesics. Configurations with marginally closed equipotential (equipressure) surfaces crossing itself in a cusp allow accretion (through the inner cusp) and/or excretion (through the outer cusp) of matter from the toroidal configuration. Detailed classification of the Reissner-Nordström-(anti-)de Sitter spacetimes according to properties of the marginally stable tori is given. It is demonstrated that in the Reissner-Nordström-de Sitter naked-singularity spacetimes an interesting phenomenon of doubled tori can exist enabling exchange of matter between two tori in both inward and outward directions. In naked-singularity spacetimes the accretion onto the central singularity is impossible due to existence of a potential barrier.

79 ASTRONOMY AND ASTROPHYSICS↗

Two-phase flow structure in dual discharges - Stereo PIV measurements

The discharge of two-phase flow from a stratified region through single or multiple branches is an important process in many industrial applications including the pumping of fluid from storage tanks, shell-and-tube heat exchangers, and the fluid flow through header to the cooling channels, feeder's tube, of nuclear reactors during loss-of-coolant accidents (LOCA). Knowledge of the flow phenomena involved along with the quality and mass flow rate of the discharging stream(s) is necessary to adequately predict the different phenomena associated with the process. Stereoscopic Particle Image Velocimetry (SPIV) was used to provide detailed measurements of the flow patterns involving distributions of mean velocity, vorticity field, and flow structure. The experimental investigation was carried out to simulate two-phase discharge from a stratified region through branches located on a quarter-circular wall configuration exposed to a stratified gas-liquid environment. The quarter-circular test section is in close dimensional resemblance with that of a CANDU header-feeder system, with branches mounted at orientation angles of zero, 45 and 90 degrees from the horizontal. The experimental data for the phase development (mean velocity, flow structure, etc.) was collected during dual discharge through the horizontal branch and the 45 or 90 branch from an air-water stratified region over two selected Froude numbers in the horizontal branch while maintaining the Froude number in the other branch constant. These measurements were used to describe the effect of outlet flow conditions on phase redistribution in headers and understand the entrainment phenomena. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Guidance to Design Grain Boundary Mobility Experiments with Molecular Dynamics and Phase-Field Modeling

Quantitative phase-field modeling can play an important role in designing experiments to measure the grain boundary (GB) mobility. In this work, molecular dynamics (MD) simulation is employed to determine the GB mobility using Cu bicrystals. Two grain configurations are considered: a shrinking circular grain and a half loop grain. The results obtained from the half loop configuration approaches asymptotically to that obtained from the circular configuration with increasing half loop width. We then verify the phase- field model by directly comparing to the MD simulation results, obtaining excellent agreement. Next, this phase-field model is used to predict the behavior in a common experimental setup that utilizes a half loop grain configuration in a bicrystal to measure the GB mobility. With a 3D simulation, we identify the two critical times within the experiments to reach an accurate value of the GB mobility. We use a series of 2D simulations to investigate the impact of the notch angle on these two critical times and we identify an angle of 60? as an optimal value. We also show that if the notch does not have a sharp tip, it may immobilize the GB migration indefinitely.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Self-organized dynamics and the transition to turbulence of confined active nematics

We study how confinement transforms the chaotic dynamics of bulk microtubule-based active nematics into regular spatiotemporal patterns. For weak confinements in disks, multiple continuously nucleating and annihilating topological defects self-organize into persistent circular flows of either handedness. Increasing confinement strength leads to the emergence of distinct dynamics, in which the slow periodic nucleation of topological defects at the boundary is superimposed onto a fast procession of a pair of defects. A defect pair migrates toward the confinement core over multiple rotation cycles, while the associated nematic director field evolves from a distinct double spiral toward a nearly circularly symmetric configuration. The collapse of the defect orbits is punctuated by another boundary-localized nucleation event, that sets up long-term doubly periodic dynamics. Comparing experimental data to a theoretical model of an active nematic reveals that theory captures the fast procession of a pair of + 1 / 2 defects, but not the slow spiral transformation nor the periodic nucleation of defect pairs. Theory also fails to predict the emergence of circular flows in the weak confinement regime. The developed confinement methods are generalized to more complex geometries, providing a robust microfluidic platform for rationally engineering 2D autonomous flows.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigations of Nonconventional Cross Sections of Gas-Discharge Lasers

Gains of lasers with regular polygon cross sections of tubes having curvilinear sections are considered. Calculations are performed for parabolic polygons, a triangle, and a circle with extra curvature. Results obtained show the consistency of the model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flow pattern, void fraction and pressure drop of two-phase air-water flow in a horizontal circular micro-channel

Adiabatic two-phase air-water flow characteristics, including the two-phase flow pattern as well as the void fraction and two-phase frictional pressure drop, in a circular micro-channel are experimentally studied. A fused silica channel, 320 mm long, with an inside diameter of 0.53 mm is used as the test section. The test runs are done at superficial velocity of gas and liquid ranging between 0.37-16 and 0.005-3.04 m/s, respectively. The flow pattern map is developed from the observed flow patterns i.e. slug flow, throat-annular flow, churn flow and annular-rivulet flow. The flow pattern map is compared with those of other researchers obtained from different working fluids. The present single-phase experiments also show that there are no significant differences in the data from the use of air or nitrogen gas, and water or de-ionized water. The void fraction data obtained by image analysis tends to correspond with the homogeneous flow model. The two-phase pressure drops are also used to calculate the frictional multiplier. The multiplier data show a dependence on flow pattern as well as mass flux. A new correlation of two-phase frictional multiplier is also proposed for practical application. (author)

42 ENGINEERING↗

Experimental measurement of flow past cavities of different shapes

Experiments are carried out in order to investigate the flow structure past a rectangular, triangular and semi-circular cavity of length-to-depth ratio of 2:1 using the Particle Image Velocimetry (PIV) technique. The experiments are performed in a large scale water channel with three different upstream velocities resulting in Reynolds numbers of 1230, 1460 and 1700, based on inflow momentum thickness, for each cavity type. Contours of constant averaged streamwise and transverse components of velocity, contours of constant averaged vorticity, Reynolds stress and streamline plots for each cavity type for the aforementioned three Reynolds numbers are presented. In addition, streamwise velocity, Reynolds stress and turbulence intensity values are compared for all cavity types. Effect of cavity shape on flow structure within the cavity is discussed in detail. Moreover, spectrum of instantaneous streamwise velocity fluctuations in shear layer near the downstream of the leading corner and the upstream of the trailing corner of the cavities are obtained and it was found that no organized oscillations are present in the flow; rectangular and triangular cavities have the largest amplitudes while semi-circular cavity has the smallest. Calculated turbulence intensities also reveal that the maximum turbulence intensities occur at cavity lid in the centerline section and rectangular and triangular cavities have larger turbulence intensity compared to semi-circular cavity. (author)

42 ENGINEERING↗

On geometric factors for neutral particle analyzers

Neutral particle analyzers (NPA) detect neutralized energetic particles that escape from plasmas. Geometric factors relate the counting rate of the detectors to the intensity of the particle source. Accurate geometric factors enable quick simulation of geometric effects without the need to resort to slower Monte Carlo methods. Previously derived expressions [G. R. Thomas and D. M. Willis, “Analytical derivation of the geometric factor of a particle detector having circular or rectangular geometry,” J. Phys. E: Sci. Instrum. 5(3), 260 (1972); J. D. Sullivan, “Geometric factor and directional response of single and multi-element particle telescopes,” Nucl. Instrum. Methods 95(1), 5–11 (1971)] for the geometric factor implicitly assume that the particle source is very far away from the detector (far-field); this excludes applications close to the detector (near-field). The far-field assumption does not hold in most fusion applications of NPA detectors. We derive, from probability theory, a generalized framework for deriving geometric factors that are valid for both near and far-field applications as well as for non-isotropic sources and nonlinear particle trajectories.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tailoring Very-High-n Circular Wavepackets

We describe a protocol to generate transiently localized circular wavepackets in very-high-n Rydberg states. These are created from strongly-polarized quasi-one-dimensional Rydberg states by applying a transverse pulsed electric field. The resulting wavepacket becomes transiently localized as the result of focusing and travels in a nearly circular Bohr-like orbit around the nucleus for several orbital periods. The localization properties can be controlled by carefully choosing the shape of the field pulse, in particular, its rise and fall times. Remarkably, the wavepackets exhibit classical revivals after the initial dephasing on time scales shorter than those expected for quantum revivals.

74 ATOMIC AND MOLECULAR PHYSICS↗

Encoding and decoding phase information in high-n circular wave packets

We demonstrate theoretically and experimentally the extraction of detailed information on the density matrix of very-high-n (>300) near-circular Rydberg wave packets through Fourier analysis of the quantum beat and quantum revival signals. The remarkably long coherence times associated with circular wave packets facilitate the preservation and read-out of phase information encoded in this matrix. We illustrate the power of the method by determining the angular localization of the components of a wave packet.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Attributes of Bi-Directional Turbomachinery for Pumped Thermal Energy Storage

Abstract In this paper, we (i) present a methodology for determining the aerodynamic performance of bi-directional turbomachines for pumped thermal energy storage, i.e., turbomachines designed to operate as a compressor in one direction, and then as a turbine in the opposite direction, (ii) carry out performance computations for such turbomachines, and (iii) propose principles for conceptual design of these devices. Focus is placed on using the energy storage cycle not only to identify the novel requirements placed on bi-directional turbomachines but also to estimate the effect of these requirements on the efficiency of the energy storage process. In particular, the difference between aerodynamic loading in forward and in backward operation causes the blading to work at incidences leading to the performance below maximum efficiency, resulting in a lower round-trip efficiency. The description of the design principles includes determination of the number of stages, definition of nondimensional parameters for blading selection, and optimization of two-dimensional blading for bi-directional operation. The assessment of stage count shows the relationship between relative Mach number, pressure ratio, and round-trip efficiency. The nondimensional parameters are assessed through a bi-directional analogue to existing “Smith charts,” for the efficiency of single-direction turbomachines, as a function of camber and stagger. The blade shape evaluation and optimization show how the blade profile can be modified to address the requirements of a bi-directional turbomachine, enabling an increase in round-trip efficiency of two percentage points compared to a baseline double circular arc configuration.

Engineering↗

Analytic reconstruction algorithms for triple-source CT with horizontal data truncation

Purpose: This paper explores a triple-source imaging method with horizontal data truncation to enlarge the field of view (FOV) for big objects. Methods: The study is conducted by using theoretical analysis, mathematical deduction, and numerical simulations. The proposed algorithms are implemented in c + + and MATLAB. While the basic platform is constructed in MATLAB, the computationally intensive segments are coded in c + +, which are linked via a MEX interface. Results: A triple-source circular scanning configuration with horizontal data truncation is developed, where three pairs of x-ray sources and detectors are unevenly distributed on the same circle to cover the whole imaging object. For this triple-source configuration, a fan-beam filtered backprojection-type algorithm is derived for truncated full-scan projections without data rebinning. The algorithm is also extended for horizontally truncated half-scan projections and cone-beam projections in a Feldkamp-type framework. Using their method, the FOV is enlarged twofold to threefold to scan bigger objects with high speed and quality. The numerical simulation results confirm the correctness and effectiveness of the developed algorithms. Conclusions: The triple-source scanning configuration with horizontal data truncation cannot only keep most of the advantages of a traditional multisource system but also cover a larger FOV for big imaging objects. In addition, because the filtering is shift-invariant, the proposed algorithms are very fast and easily parallelized on graphic processing units.

60 APPLIED LIFE SCIENCES↗

Automated Calculation of Bulk-Stamping Matrices for Circular Blanks

The bulk stamping of circular blanks is considered. There is a clear need for automatic stamping. The input and output data for calculating the working part of the bulk-stamping matrix are analyzed. Software for automated calculation of bulk-stamping matrices is developed. The program code and a possible interface for the calculation of matrix parameters and construction of 3D models by means of the Object Pascal language are presented.

42 ENGINEERING↗

A pair of giant planets around the evolved intermediate-mass star HD 47366: Multiple circular orbits or a mutually retrograde configuration

We report the detection of a double planetary system around the evolved intermediate-mass star HD 47366 from precise radial-velocity measurements at the Okayama Astrophysical Observatory, Xinglong Station, and Australian Astronomical Observatory. The star is a K1 giant with a mass of 1.81 ± 0.13 M{sub ⊙}, a radius of 7.30 ± 0.33 R{sub ⊙}, and solar metallicity. The planetary system is composed of two giant planets with minimum masses of 1.75{sub −0.17}{sup +0.20} M{sub J} and 1.86{sub −0.15}{sup +0.16} M{sub J}, orbital periods of 363.3{sub −2.4}{sup +2.5} days and 684.7{sub −4.9}{sup +5.0} days, and eccentricities of 0.089{sub −0.060}{sup +0.079} and 0.278{sub −0.094}{sup +0.067}, respectively, which are derived by a double Keplerian orbital fit to the radial-velocity data. The system adds to the population of multi-giant-planet systems with relatively small orbital separations, which are preferentially found around evolved intermediate-mass stars. Dynamical stability analysis for the system revealed, however, that the best-fit orbits are unstable in the case of a prograde configuration. The system could be stable if the planets were in 2:1 mean-motion resonance, but this is less likely, considering the observed period ratio and eccentricity. A present possible scenario for the system is that both of the planets have nearly circular orbits, namely the eccentricity of the outer planet is less than ∼0.15, which is just within 1.4σ of the best-fit value, or the planets are in a mutually retrograde configuration with a mutual orbital inclination larger than 160°.

79 ASTRONOMY AND ASTROPHYSICS↗