Search NASA⌕ Search

SEARCH · Search NASA

Results for “CLOSE PACKED STRUCTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High entropy alloys with hexagonal close-packed structure derived from thin film combinatorial approach

A thin film combinatorial synthesis approach was utilized to develop a compositional and structural library for the OsRuWCo alloy system. The survey of this alloy space produced 24 unique compositions and their corresponding crystal structures, which represent a phase map where amorphous and single-phase hexagonal close-packed alloys were identified. Based on the identification of a promising candidate film region, a new high entropy alloy based on OsRuWCo, but with non-equiatomic composition, was synthesized in bulk form. The alloy exhibited a single-phase hexagonal close-packed structure in the as-cast state. Three derivatives from this system were also developed by considering the heat of mixing, atomic size, and binary solubility. These new alloys are based on OsRuWCoIr and OsRuWCoFe, both of which exhibit single-phase hexagonal close-packed as-cast structures, as determined by X-ray diffraction and electron microscopy. Additionally, this large compositional space was utilized to evaluate conventional parameters that describe high entropy alloys (ΔS mix , ΔH mix , Ω, δ, and VEC), and these were found to elucidate the criteria for solid solution formation in this system. Additionally, trends illustrating the evolution from amorphous to crystalline phases are demonstrated and discussed. It is concluded that in this particular case, the dominant factors promoting crystallinity are thermodynamic or electronic, rather than geometric.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of a mixed close-packed structure in superionic water

The study of superionic (SI) water has been a highly active research area since its theoretical prediction. Despite significant experimental and computational efforts, its melting curve and the stability of different oxygen lattices remain debated, impacting our understanding of SI ice’s peculiar transport properties. Experimental results at lower pressures show disagreement, whereas data at higher pressures are scarce due to the extreme challenges of such experiments. In this work, we present ultrafast X-ray diffraction results of water compressed by multiple shocks to pressures up to ~ 180 GPa. At pressures exceeding 150 GPa and temperatures around 2500 K, our diffraction patterns challenge the pure FCC-SI phase model, providing experimental evidence of the mixed close-packed superionic phase predicted by advanced ab initio calculations. At lower pressures, we observe simultaneous signatures of BCC and FCC structures within a pressure-temperature range consistent with some static-compression experiments, helping to resolve contradictory results in literature. These insights offer new constraints on the stability domains of SI phases and reveal detailed structural features, such as stacking faults. Our results advance the structural understanding of high-pressure SI ice to a level approaching that of ice I polymorphs, with potential implications for water-rich interiors of giant planets.

Andriambariarijaona, Leon [Centre National de la R↗
DOE OSTI2022

Apex hydrogen bonds in dendron assemblies modulate close-packed mesocrystal structures

The close-packed mesocrystal structures from soft-matter assemblies have recently received attention due to their structural similarity to atomic crystals, displaying various sphere-packing Frank–Kasper (FK) and quasicrystal structures. Herein, diverse mesocrystal structures are explored in second-generation dendrons (G2-X) designed with identical wedges, in which the terminal functionalities X = CONH 2 and CH 2 NH 2 represent two levels of the strong and weak hydrogen-bonding apexes, respectively. The cohesive interactions at the core apex, referred to as the core interactions, are effectively modulated by forming heterogeneous hydrogen bonds between these two functional units. For the dendron assemblies compositionally close to each pure component of G2-CONH 2 and G2-CH 2 NH 2 , their own FK A15 and C14 phases dominate other phases, respectively. We show the existence of the wide-range FK σ including the dodecagonal quasicrystal (DDQC) phases from the dendron mixtures between G2-CONH 2 and G2-CH 2 NH 2 , providing an experimental phase sequence of A15–σ–DDQC–C14 as the core interactions are alleviated. Intriguingly, the temperature dependence of particle sizes shows that the high plateau values of particle sizes are maintained equivalently until each threshold temperature (T th ), followed by a prompt decrease above the T th . A decrease in T th by alleviating the core interactions and its composition dependence suggest that the more size-dispersed particles, the more susceptibility to chain exchange with increasing temperature. Here our results on the formation of supramolecular dendron assemblies provide a guide to understand the core-interaction-dependent mesocrystal structures toward the fundamental principle underlying the temperature dependence of their particle sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Directing Polymorphism of Colloid Crystals Using Conformational Entropy of Polymer Chains

Controlling the polytypes of close-packed structures of spherical colloids is still a challenging problem despite their wide occurrence. Here, in this work, we show that systematic engineering of the polytype structures of close-packed colloids is possible by using the conformational entropy of polymer chains confined in the interstitial space of colloid crystals. Our interstitial space analysis shows that the hexagonal close-packed (HCP) structures offer larger local interstitial space domains, and the structure director chains in favor of HCP counteract the entropic advantages of the face-centered cubic (FCC) lattices. Using model block copolymer colloids and the known lattice entropy of FCC, a proportionality parameter, β CP = 1.91 × 10 –3 ± 3.67 × 10 –4 , for quantifying the conformational entropy contribution toward HCP structures is extracted. This work demonstrates that the interstitial space of colloid crystals serves as a new structure engineering tool for the self-assembly of colloids.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanochemically Enabled Metastable Niobium Tungsten Oxides

Metastable compounds have greatly expanded the synthesizable compositions of solid-state materials and have attracted enormous amounts of attention in recent years. Especially, mechanochemically enabled metastable materials synthesis has been very successful in realizing cation-disordered materials with highly simple crystal structures, such as rock salts. Application of the same strategy for other structural types, especially for non-close-packed structures, is peculiarly underexplored. Niobium tungsten oxides (NbWOs), a class of materials that have been under the spotlight because of their diverse structural varieties and promising electrochemical and thermoelectric properties, are ideally suited to fill such a knowledge gap. In this work, we develop a new series of metastable NbWOs and realize one with a fully cation-disordered structure. Furthermore, we find that metastable NbWOs transform to a cation-disordered cubic structure when applied as a Li-ion battery anode, highlighting an intriguing non-close-packed–close-packed conversion process, as evidenced in various physicochemical characterizations, in terms of diffraction, electronic, and vibrational structures. Lastly, by comparing the cation-disordered NbWO with other trending cation-disordered oxides, we raise a few key structural features for cation disorder and suggest a few possible research opportunities for this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rapid In Situ Ligand‐Exchange Process Used to Prepare 3D PbSe Nanocrystal Superlattice Infrared Photodetectors

Abstract Colloidal semiconductor nanocrystals are important building blocks for low‐cost, solution‐processed electronic devices with tunable functionalities. Considerable progress is made in improving charge transport through nanocrystal films by exchanging long insulating ligands with shorter passivating ligands. To take full advantage of this strategy, it is equally important to fabricate close‐packed structures that reduce the average interparticle spacing. Yet it remains a challenge to retain long‐range, close‐packed order after ligand exchange. Here, a novel one‐step in situ ligand‐exchange method is demonstrated that enables rapid (5 min) ligand exchange of nanocrystal films, which are more than 50 layers thick. Using this simple and efficient method, it is shown that the face‐centered cubic ordering of 500 nm thick PbSe nanocrystal films is retained after ligand exchange from oleic acid to benzoic acid. Moreover, it is demonstrated that PbSe nanocrystal photodetectors with a well‐ordered structure have superior optoelectronic properties compared to disordered films; ordered films have a 16× higher responsivity of ≈0.25 A W −1 at 1 V and a 2× faster response time. As far as it is known, this is the first report to realize a rapid one‐step ligand exchange through a thick superlattice film with retention of long‐range order.

infrared detecton↗
DOE OSTI2020

Lithiation of Sulfur-Graphene Compounds Using Reactive Force-Field Molecular Dynamics Simulations

We performed molecular dynamics simulations of lithium-sulfur-graphene compounds using reactive force fields, providing a time scale to observe atomistic features relevant to the microscopic behavior of the of the bulk of sulfur-based cathodes to be used beyond our present Li-ion batteries. The samples we used were set to realistic geometries through sophisticated protocols to simulate ultrafast reactions that occur within the picosecond range, thus allowing us to get some insights into the characteristics of the bulk material in working cathodes of Li–S batteries, which are mixed with carbon to increase the poor electronic conductivity of S. We report chemical speciation and geometrical data at atomistic levels. We observed that slowly lithiated cathodes were more stable and with higher density than those that were suddenly fully-lithiated. We did not observe molecular Li 2 S formation; however, we observed an amorphous solid arrangement with the same stoichiometry of Li and S, with S–Li–S angles of ~111° and smaller ones due to the interaction between polysulfides that did not reacted totally. In addition, graphene keeps its planar shape; however, S8 changes its shape from rings to chains. Lithiated structures are more stable with lower energies, and more close-packed structures than structures with Li already inserted.

25 ENERGY STORAGE↗
DOE OSTI2020

Developing new alkaline ceramics as possible CO 2 chemisorbents at high temperatures: The lithium and sodium yttriates (LiYO 2 and NaYO 2 ) cases

In this work, lithium and sodium yttriates (LiYO 2 and NaYO 2 ) were synthesized, characterized and tested as possible carbon dioxide (CO 2 ) captors. All the experimental syntheses and analyses were supported by the theoretical thermodynamic calculations, showing that both ceramics would be able to chemisorb CO 2 in a wide temperature range. Therefore, both ceramics were prepared by solid-state reaction and structurally characterized. In fact, the structural characterization evidenced that sodium atoms are located in a octahedral close-packed structure, while lithium ions are not so packed. The lithium ions are, indeed, in a highly distorted tetrahedron, tending to square-planar coordination. Then, based on the theoretical and structural analysis, LiYO 2 and NaYO 2 samples were investigated for the CO 2 capture process through dynamic and isothermal thermogravimetric experiments. All these experiments showed that LiYO 2 has better CO 2 capture properties than NaYO 2 , which was further correlated with the crystal structures of each ceramic. Furthermore, both ceramics presented similar CO 2 capture efficiencies regardless of the CO 2 concentration. Finally, LiYO 2 sample was tested for cyclic CO 2 chemisorption-desorption processes. The obtained results showed that the CO 2 capture efficiency is maintained high at least through 10 cycles. Therefore, these alkaline yttriates seem to present interesting alternatives as high and moderate temperature CO 2 captors, applicable for post-combustion industrial capture processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

First-principles equations of state and structures of liquid metals in multi-megabar conditions

Liquid metals at extreme pressures and temperatures are widely interested in the high-pressure community. Based on density functional theory molecular dynamics, we conduct first-principles investigations on the equation of state ( EOS) and structures of four metals (Cu, Fe, Pb, and Sn) at 1.5–5 megabar conditions and 5 × 10 3 –4 × 10 4 K. Our first-principles EOS data enable evaluating the performance of four EOS models in predicting Hugoniot densities and temperatures of the four systems. We find the melting temperature of Cu is 1000–2000 K higher and shows a similar Clapeyron slope, in comparison to those of Fe. Our structure, coordination number, and diffusivity analysis indicates all the four liquid metals form similar simple close-packed structures. Our results set theoretical benchmarks for EOS development and structures of metals in their liquid states and under dynamic compression.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy

Ever-harsher service conditions in the future will call for materials with increasing ability to undergo deformation without sustaining damage while retaining high strength. Prime candidates for these conditions are certain high-entropy alloys (HEAs), which have extraordinary work-hardening ability and toughness. By subjecting the equiatomic CrMnFeCoNi HEA to severe plastic deformation through swaging followed by either quasi-static compression or dynamic deformation in shear, we observe a dense structure comprising stacking faults, twins, transformation from the face-centered cubic to the hexagonal close-packed structure, and, of particular note, amorphization. The coordinated propagation of stacking faults and twins along {111} planes generates high-deformation regions, which can reorganize into hexagonal packets; when the defect density in these regions reaches a critical level, they generate islands of amorphous material. These regions can have outstanding mechanical properties, which provide additional strengthening and/or toughening mechanisms to enhance the capability of these alloys to withstand extreme loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Small-Angle X-ray Scattering Analysis of Colloidal Crystals and Replica Materials Made from L-Arginine-Stabilized Silica Nanoparticles

Colloidal crystals made from sub-100 nm silica nanoparticles have provided a versatile platform for the template-assisted synthesis of three-dimensionally interconnected semiconducting, metallic, and magnetic replicas. However, the detailed structure of these materials has not yet been characterized. Here, we investigated the structures of colloidal crystalline films and germanium replicas by scanning electron microscopy and small angle X-ray scattering. The structures of colloidal crystals made by evaporative assembly depends on the size of L-arginine-capped silica nanoparticles. Particles smaller than ~31 nm diameter assemble into non-close-packed arrangements (bcc) whereas particles larger than 31 nm assemble into random close-packed structures with disordered hexagonal phase. Polycrystalline films of these materials retain their structures and long-range order upon infiltration at high temperature and pressure, and the structure is preserved in Ge replicas. The shear force during deposition and dispersity of silica nanoparticles contributes to the size-based variation in the structure and to the size of crystal domains in the colloidal crystal films.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Quasi-liquid states observed on ion beam microtextured surfaces

Liquid-like properties have been observed on surface structures developed by means of ion beam microtexturing. The structures include cones, pyramids, or wavelike formations. The observed liquid-like effects are drips and ripples on the sides of cones, droplet formation, the apparent flow and coalescence of closely packed structures, wetting angle and other surface tension effects, and the bending of cones by additional heating. The bulk temperatures are in the range of 50-600 C. These effects are seen to some extent on Cu, Al, Au, Pb, and Ni substrates.

Rossnagel, S. M.↗
NASA NTRS1988

Synchrotron X-ray diffraction measurements of single-crystal hydrogen to 26.5 gigapascals

The crystal structure and equation of state of solid hydrogen have been determined directly to 26.5 gigapascals at room temperature by new synchrotron X-ray diffraction techniques. Solid hydrogen remains in the hexagonal close packed structure under these pressure-temperature conditions and exhibits increasing structural anisotropy with pressure. The pressure-volume curve determined from the X-ray data represents the most accurate experimental measurement of the equation of state to date in this pressure range. The results remove the discrepancy between earlier indirect determinations and provide a new experimental constraint on the molecular-to-atomic transition predicted at higher pressures.

Mao, H. K.↗
DOE OSTI2021

Evoking ordered vacancies in metallic nanostructures toward a vacated Barlow packing for high-performance hydrogen evolution

Metallic nanostructures are commonly densely packed into a few packing variants with slightly different atomic packing factors. The structural aspects and physicochemical properties related with the vacancies in such nanostructures are rarely explored because of lack of an effective way to control the introduction of vacancy sites. Highly voided metallic nanostructures with ordered vacancies are however energetically high lying and very difficult to synthesize. Here, we report a chemical method for synthesis of hierarchical Rh nanostructures (Rh NSs) composed of ultrathin nanosheets, composed of hexagonal close-packed structure embedded with nanodomains that adopt a vacated Barlow packing with ordered vacancies. The obtained Rh NSs exhibit remarkably enhanced electrocatalytic activity and stability toward the hydrogen evolution reaction (HER) in alkaline media. Theoretical calculations reveal that the exceptional electrocatalytic performance of Rh NSs originates from their unique vacancy structures, which facilitate the adsorption and dissociation of H 2 O in the HER.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Strength, deformation, and the fcc–hcp phase transition in condensed Kr and Xe to the 100 GPa pressure range

The rare gas solids exhibit systematic differences in crystal structure, phase transition conditions, bond strength, and other physical properties. The physical properties of heavy rare gas solids krypton and xenon are modified by the martensitic phase transition from face-centered cubic to hexagonal close packed structure over a broad pressure range. Crystal structure, strength, and plastic deformation of krypton and xenon have been investigated at 300 K using compression in the diamond-anvil cell with synchrotron angle-dispersive x-ray diffraction and complementary ruby fluorescence spectroscopy for Xe. Stacking faults indicative of the fcc–hcp phase transition are observed at pressures at and above 1.23 ± 0.05 and 1.9 ± 0.6 GPa in Kr and Xe, respectively. The transition remains incomplete in both solids to pressures greater than 100 GPa. Strength determined from stress measurements in Pt and ruby standards at pressures up to 111 GPa and complemented by observations of strain and texture measurements obtained by x-ray diffraction in the radial geometry to 100 GPa indicates similar or higher strength than Ar at all conditions, with significant stiffening at 15–20 GPa. Radial diffraction data reveal the persistence of broad highly textured fcc diffraction lines to 101 GPa in Xe, suggesting that the axial measurements may underestimate the metastable persistence of the fcc phase due to biased sampling of hcp crystallites resulting from preferred crystallite orientation. Kr and Xe are compared with He, Ne, and Ar for a systematic understanding of physical properties and phase equilibria of rare gas solids.

Compressive stress↗
NASA NTRS1991

Bond-orientational order in liquid Si

Bond-orientational order in liquid Si via Monte Carlo simulation in conjuncation with empirical two- and three-body potentials of the form proposed by Stillinger and Weber are studied. Bond-orientational order (BOO) is described in terms of combinations of spherical harmonic functions. Liquid Si is found to have pronounced short-range BOO corresponding to l = 3, as expected for a structure with local tetrahedral order. No long-range BOO is found either in the equilibrium or the supercooled liquid. When the three-body potential is artificially removed, the tetrahedral bond-orientation order disappears and the liquid assumes a close-packed structure.

Wang, Z. Q.↗
DOE OSTI2023

On the Electride Nature of Na–hP4

Early quantum mechanical models suggested that pressure drives solids towards free-electron metal behavior where the ions are locked into simple close-packed structures. The prediction and subsequent discovery of high-pressure electrides (HPEs), compounds assuming open structures where the valence electrons are localized in interstitial voids, required a paradigm shift. Our quantum chemical calculations on the iconic insulating Na-hP4 HPE show that increasing density causes a 3s→3pd electronic transition due to Pauli repulsion between the 1s2s and 3s states, and orthogonality of the 3pd states to the core. The large lobes of the resulting Na-pd hybrid orbitals point towards the center of an 11-membered penta-capped trigonal prism and overlap constructively, forming multicentered bonds, which are responsible for the emergence of the interstitial charge localization in Na-hP4. As a result, these multicentered bonds facilitate the increased density of this phase, which is key for its stabilization under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Large-Area Periodic Arrays of Atomically Flat Single-Crystal Gold Nanotriangles Formed Directly on Substrate Surfaces

The advancement of nanoenabled wafer-based devices requires the establishment of core competencies related to the deterministic positioning of nanometric building blocks over large areas. Within this realm, plasmonic single-crystal gold nanotriangles represent one of the most attractive nanoscale components but where the formation of addressable arrays at scale has heretofore proven impracticable. In this work, a benchtop process is presented for the formation of large-area periodic arrays of gold nanotriangles. The devised growth pathway sees the formation of an array of defect-laden seeds using lithographic and vapor-phase assembly processes followed by their placement in a growth solution promoting planar growth and threefold symmetric side-faceting. The nanotriangles formed in this high-yield synthesis distinguish themselves in that they are epitaxially aligned with the underlying substrate, grown to thicknesses that are not readily obtainable in colloidal syntheses, and present atomically flat pristine surfaces exhibiting gold atoms with a close-packed structure. As such, they express crisp and unambiguous plasmonic modes and form photoactive surfaces with highly tunable and readily modeled plasmon resonances. The devised methods, hence, advance the integration of single-crystal gold nanotriangles into device platforms and provide an overall fabrication strategy that is adaptable to other nanomaterials.

42 ENGINEERING↗