Anthropogenic CO 2 uptake, transport, storage, and dynamical controls in the ocean imposed by the meridional overturning circulation: A modeling study
Explore the source record for details and available documents.
H. Nakano↗
SEARCH · Search NASA
Results for “CO 2 storage”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Charge Transfer Between Ground-State N(2+) and H2, N2, and CO at Electron-Volt Energies
The charge-transfer rate coefficients for reactions of N(2+)(2 S(sup 2)2p(sup 2)P(sup 0)) with H2, N2, and CO are measured using ion storage. A cylindrical rf ion trap was used to store N(2+) ions produced by laser ablation of a solid titanium nitride target. The rate coefficients were derived from the decay rate of the ion signal. The rate coefficients for the above three reactions are 3.38(0.35) x 10(exp -11)sq sm/s at T(sub equiv.)=2.9 x 10(exp 3) K, 2.10(0.18) x 10(exp -9)sq sm/s at T(sub equiv.) = 1.3 x 10(exp 4) K, and 3.37(0.29) x 10(exp -9)sq cm/s at T(sub equiv.) = 1.3 x 10(exp 4) K, respectively. No theoretical or other experimental values are available at this energy range.
Fang, Z.↗
Future Plans in US Flight Missions: Using Laser Remote Sensing for Climate Science Observations
Laser Remote Sensing provides critical climate science observations necessary to better measure, understand, model and predict the Earth's water, carbon and energy cycles. Laser Remote Sensing applications for studying the Earth and other planets include three dimensional mapping of surface topography, canopy height and density, atmospheric measurement of aerosols and trace gases, plume and cloud profiles, and winds measurements. Beyond the science, data from these missions will produce new data products and applications for a multitude of end users including policy makers and urban planners on local, national and global levels. NASA Missions in formulation including Ice, Cloud, and land Elevation Satellite (ICESat 2) and the Deformation, Ecosystem Structure, and Dynamics of Ice (DESDynI), and future missions such as the Active Sensing of CO2 Emissions over Nights, Days and Seasons (ASCENDS), will incorporate the next generation of LIght Detection And Ranging (lidar) instruments to measure changes in the surface elevation of the ice, quantify ecosystem carbon storage due to biomass and its change, and provide critical data on CO 2 in the atmosphere. Goddard's plans for these instruments and potential uses for the resulting data are described below. For the ICESat 2 mission, GSFC is developing a micro-pulse multi-beam lidar. This instrument will provide improved ice elevation estimates over high slope and very rough areas and result in improved lead detection for sea ice estimates. Data about the sea ice and predictions related to sea levels will continue to help inform urban planners as the changes in the polar ice accelerate. DESDynI is planned to be launched in 2017 and includes both lidar and radar instruments. GSFC is responsible for the lidar portion of the DESDynI mission and is developing a scanning laser altimeter that will measure the Earth's topography, the structure of tree canopies, biomass, and surface roughness. The DESDynI lidar will also measure and predict the response of ice masses to climate change and impact on sea level. Data from the lidar will ultimately be fused with radar data products with heretofore unseen results and applications. The 3-D structure of forests is critical to understanding the impact of land use and associated landscape changes on the habitat of life forms and consequently on their biodiversity. Lidar instruments are also under development to measure trace gases in the atmospheric such as CO2 and methane. GSFC is developing an active measurement approach to determine the CO2 column density and surface pressure for the proposed ASCENDS mission. The objective of this approach is to produce data on the amounts of anthropogenic and organic CO2 in the atmosphere with sufficient accuracy to meet the needs of target users including state, federal and international users as well as policy-related legislative, regulatory, and voluntary carbon-related management groups local to international interests. In summary, NASA will continue to rely on laser remote sensing for critical climate science observations and is committed to the development of the next generation of lidar instruments for a range of applications.
Callahan, Lisa W.↗
Properties and Performance Attributes of Novel Co-extruded Polyolefin Battery Separator Materials: Electrical Properties - Part 2
As NASA prepares for its next era of manned spaceflight missions, advanced energy storage technologies are being developed and evaluated to address and enhance future mission needs and technical requirements. Cell-level components for advanced lithium-ion batteries possessing higher energy, more reliable performance and enhanced, inherent safety characteristics have been under development within the NASA infrastructure. A key component for safe and reliable cell performance is the cell separator, which separates the two energetic electrodes and functions to inhibit the occurrence of an internal short circuit but preserves an ionic current. Recently, a new generation of co-extruded separator films has been developed by ExxonMobil Chemical and introduced into their battery separator product portfolio. Several grades of this new separator material were evaluated with respect to dynamic mechanical properties and safety-related performance attributes, and the results of these evaluations were previously reported in "Part 1: Mechanical Properties" of this publication. This current paper presents safety-related performance results for these novel materials obtained by employing a complementary experimental methodology, which involved the analysis of separator impedance characteristics as a function of temperature. The experimental results from this study are discussed with respect to potential cell safety enhancement for future aerospace as well as for terrestrial energy storage needs, and they are compared with pertinent mechanical properties of these materials, as well as with current state-of-the practice separator materials.
Baldwin, Richard S.↗
Xplo-SA9T: Optimization of Sorbent Technology With Existing and New Amine Variants for Carbon Dioxide Removal and Humidity Control
Scrubbing of the spacesuit air stream to control humidity and regulate carbon dioxide (CO 2 ) relies on amine-loaded resins, colloquially known as sorbents. The efficacy of Rapid Cycle Amine technology relies on the propensity of nitrogens toward adsorption of CO 2 while simultaneously offering regenerative properties under vacuum or positive pressure. The commonly utilized sorbent, SA9T, was recreated and evaluated further to increase stability and serve as a benchmark comparison for newly synthesized amine sorbent technologies. Ongoing storage studies with eight different environments will allow the development of applicable storage protocols and provide insight into possible ammonia generation pathways. Attempts to alleviate the known issues with SA9T included the alteration of the primary amine (tetraethylenepentamine), the choice of resin, and the particle size distribution. In-house CO 2 breakthrough experiments were conducted using a specialized apparatus that can simulate spacesuit conditions, offering high-quality triplicate capacity analysis affording direct comparison to known adsorbents in the literature. Thermo-Desorption Gas Chromatography Mass Spectrometry studies on the synthesized materials revealed any reagent or solvent offgassing while Nuclear Magnetic Resonance spectroscopy tracked the stability of the bound amine. Scanning Electron Microscope images of sieved materials provided a more accurate size interpretation facilitating synthetic design and pressure drop elimination. All efficient sorbents were synthesized to a commercial batch scale subsequent to evaluation including Xplo-SA9T.
John R Tidwell↗
A New Era of H-O-C-S Magma Solubility Modeling: Better, Faster, Stronger
H 2 O, CO 2 , and S are the most abundant volatiles in magmatic systems and are critical to understanding magma storage, phase equilibria, and volcanic eruptions. Models that consider all three of these components, however, may not allow for critical examination and adjustment of assumptions underlying the model, or provide benchmark testing or extensible interfaces. Thus, understanding why models produce different results can be challenging. We have gathered authors of established (D-Compress) and recent (VolFe, EVo, Sulfur_X, MAGEC) H-O-C-S volatile solubility models to work together to understand how and why our models diverge. We present a series of benchmark basalt degassing scenarios revealing that often understated model assumptions such as fO 2 buffer equations, fO 2 -Fe 3+ /ΣFe relationships, and even major element normalization routines have outsized effects on model results. All models consider S 2- and S 6+ melt species but with different approaches to sulfate/sulfide capacities, partition coefficients, and species fugacities, leading to divergence in the evolution of modeled gas compositions, melt S and Fe speciation, and fO 2 , with the extent of divergence depending on melt composition. Such scenarios enable meaningful intercomparison of existing models and lay the groundwork for a user-friendly yet powerful solubility modeling framework. Given our wealth of existing solubility literature, we suggest that the field of magmatic volatiles should focus now on the creation of modern tools and the modular implementation of existing model equations or methods, and that the evaluation of code usability, transparency, and benchmarking should be codified pillars of the peer-review process. As an example of such an endeavor, we present early work coupling these sulfur solubility models with VESIcal, an extensible and rigorously tested python library containing seven existing H 2 O-CO 2 solubility models. VESIcal includes the ability to extract, edit, and even interchange assumptions underlying any model. For example, users may combine or swap separately published H 2 O, CO 2 , and S models, as well as underlying model choices, such as Equations of State and redox models.
volatiles in magmas↗
VESIcal: A Critical Approach to Volatile Solubility Modelling Using the Open-Source Engine Vesical
Accurate models of H(2)O and CO(2) solubility in silicate melts are vital for understanding volcanic plumbing systems. These models are used to estimate the depths of magma storage regions from melt inclusion volatile contents, investigate the role of volatile exsolution as a driver of volcanic eruptions, and track the degassing path followed by a magma ascending to the surface. However, despite the large increase in the number of experimental constraints over the last two decades, many recent studies still utilize an earlier generation of models which were calibrated on experimental datasets with restricted compositional ranges. This may be because many of the available tools for more recent models require large numbers of input parameters to be hand-typed (e.g., temperature, concentrations of H(2)O, CO(2), and 8–14 oxides), making them difficult to implement on large datasets. Here, we use a new open-source Python3 tool, VESIcal, to critically evaluate the behaviors and sensitivities of different solubility models for a range of melt compositions. Using literature datasets of andesitic-dacitic experimental products and melt inclusions as case studies, we illustrate the importance of evaluating the calibration dataset of each model. Finally, we highlight the limitations of particular data presentation methods, such as isobar diagrams, and provide suggestions for alternatives, and best practices regarding the presentation and archiving of data. This review will aid the selection of the most applicable solubility model for different melt compositions, and identifies areas where additional experimental constraints on volatile solubility are required.
magma↗
Analysis and Design of Crew Sleep Station for ISS
This paper details the analysis and design of the Temporary Sleep Station (TeSS) environmental control system for International Space Station (ISS). The TeSS will provide crewmembers with a private and personal space, to accommodate sleeping, donning and doffing of clothing, personal communication and performance of recreational activities. The need for privacy to accommodate these activities requires adequate ventilation inside the TeSS. This study considers whether temperature, carbon dioxide, and humidity within the TeSS remain within crew comfort and safety levels for various expected operating scenarios. Evaluation of these scenarios required the use and integration of various simulation codes. An approach was adapted for this study, whereby results from a particular code were integrated with other codes when necessary. Computational Fluid Dynamics (CFD) methods were used to evaluate the flow field inside the TeSS, from which local gradients for temperature, velocity, and species concentration such as CO (sub 2) could be determined. A model of the TeSS, containing a human, as well as equipment such as a laptop computer, was developed in FLUENT, a finite-volume code. Other factors, such as detailed analysis of the heat transfer through the structure, radiation, and air circulation from the TeSS to the US Laboratory Aisle, where the TeSS is housed, were considered in the model. A complementary model was developed in G189A, a code which has been used by NASA/JSC for environmental control systems analyses since the Apollo program. Boundary conditions were exchanged between the FLUENT and G189A TeSS models. G189A provides human respiration rates to the FLUENT model, while the FLUENT model provides local convective heat transfer coefficients to G189A model. An additional benefit from using an approach with both a systems simulation and CFD model, is the capability to verify the results of each model by comparison to the results of the other model. The G189A and FLUENT models were used to evaluate various ventilation designs for the TeSS over a range of operating conditions with varying crew metabolic load, equipment operating modes, ventilation flow rates, and with the TeSS doors open and closed. Results from the study were instrumental in the optimization of a design for the TeSS ventilation hardware. A special case was considered where failure of the TeSS ventilation system occurred. In this case, a study was conducted in order to determine the time required for the CO (sub 2) concentration inside the TeSS to increase to ISS limit values under transient conditions. A lumped-capacitance code, SINDA-FLUINT was used in this case to provide accurate predictions of the human reaction to the TeSS cabin conditions including core and skin temperatures and body heat storage. A simple two-dimensional CFD model of a crewmember inside the TeSS was developed in FLUENT in order to determine the volume envelope of the respired air from the human, which maintained a minimum velocity profile. This volume was then used in the SINDA-FLUINT model to facilitate the calculations of CO (sub 2) concentrations, dry bulb temperatures and humidity levels inside the TeSS.
Keener, John F.↗
Cryogenic Modules for Synergistic O2 Generation and CO2 Retention in Closed-Circuit Escape Respirators
Since 2018, NASA and the National Institute for Occupational Safety and Health (NIOSH) have been developing a liquid oxygen storage module (LOXSM) based on the NASA patent-pending Cryogenic Flux Capacitor (CFC) technology. LOXSM’s could potentially replace the gaseous or chemical-based oxygen supply in current closed-circuit escape respirators (CCER), with reducing CCER size being a primary goal. By virtue of the CFC functionality, cryogenic oxygen stored within the LOXSM is released in response to heat input, ideally from the breathing loop. Prior efforts focused on the oxygen storage potential of silica aerogel materials that the CFC utilizes, and were previously reported. Current work explored the LOXSM’s potential to remove and retain CO 2 produced by the CCER user, in conjunction with oxygen generation, creating a synergy that may be exploited to reduce or eliminate the chemical CO 2 absorber used in current CCERs. A test program for determining CO 2 retention is presented, as well as the evolution of LOXSM prototypes. Testing showed that it is possible to completely remove CO 2 out of an effluent stream at the flowrate required for the capacity of the CCER for an appreciable time, and that the LOXSM prototype design progression had a positive effect on that duration.
A.M. Swanger↗
Assessment of landscape-scale fluxes of carbon dioxide and methane in subtropical coastal wetlands of South Florida
Coastal wetlands play a significant role in the storage of “blue carbon,” indicating their importance in the carbon biogeochemistry in the coastal zone and in global climate change mitigation strategies. We present airborne eddy covariance observations of CO 2 and CH 2 fluxes collected in southern Florida as part of the NASA BlueFlux mission during April 2022, October 2022, February 2023, and April 2023. The flux data generated from this mission consists of over 100 flight hours and more than 6,000 km of horizontal distance over coastal saline and freshwater wetlands. We find that the spatial and temporal heterogeneity in CO 2 and CH 2 exchange is primarily influenced by season, vegetation type, ecosystem productivity, and soil inundation. The largest CO 2 uptake fluxes of more than 20 μmol m -2 s -1 were observed over mangroves during all deployments and over swamp forests during flights in April. The greatest CH 4 effluxes of more than 250 nmol m -2 s -1 were measured at the end of the wet season in October 2022 over freshwater marshes and swamp shrublands. Although the combined Everglades National Park and Big Cypress National Preserve region was a net sink for carbon, CH 4 emissions reduced the ecosystem carbon uptake capacity (net CO 2 exchange rates) by 11%–91%. Average total net carbon exchange rates during the flight periods were −4 to −0.2 g CO 2 -eq m -2 d -1 . Our results highlight the importance of preserving mangrove forests and point to potential avenues of further research for greenhouse gas mitigation strategies.
atmosphere↗
Sample Processor for Life on Icy Worlds (SPLIce): Design and Test Results
We report the design, development, and testing of the Sample Processor for Life on Icy Worlds (SPLIce) system, a microfluidic sample processor to enable autonomous detection of signatures of life and measurements of habitability parameters in Ocean Worlds. This monolithic fluid processing-and-handling system (Figure 1; mass 0.5 kg) retrieves a 50-L-volume sample and prepares it to supply a suite of detection instruments, each with unique preparation needs. SPLIce has potential applications in orbiter missions that sample ocean plumes, such as found in Saturns icy moon Enceladus, or landed missions on the surface of icy satellites, such as Jupiters moon Europa. Answering the question Are we alone in the universe? is captivating and exceptionally challenging. Even general criteria that define life very broadly include a significant role for water [1,2]. Searches for extinct or extant life therefore prioritize locations of abundant water whether in ancient (Mars), or present (Europa and Enceladus) times. Only two previous planetary missions had onboard fluid processing: the Viking Biology Experiments [3] and Phoenixs Wet Chemistry Laboratory (WCL) [4]. SPLIce differs crucially from those systems, including its capability to process and distribute L-volume samples and the integration autonomous control of a wide range of fluidic functions, including: 1) retrieval of fluid samples from an evacuated sample chamber; 2) onboard multi-year storage of dehydrated reagents; 3) integrated pressure, pH, and conductivity measurement; 4) filtration and retention of insoluble particles for microscopy; 5) dilution or vacuum-driven concentration of samples to accommodate instrument working ranges; 6) removal of gas bubbles from sample aliquots; 7) unidirectional flow (check valves); 8) active flow-path selection (solenoid-actuated valves); 9) metered pumping in 100 nL volume increments. The SPLIce manifold, made of three thermally fused layers of precision-machined cyclo-olefin polymer, supports all fluidic components (Figure 1) and integrated microchannels (125 x 250 m). Fluid is pumped by a stepper-motor-driven pump (Lee Co.). The functionality of the integrated MEMS pressure sensor (Honeywell) and passive check valves (Figure 2) were tested in conjunction with our newly designed integral bubble traps (Figure 3) and hydrophobic membrane-based concentrator (Figure 4). The concentrator (initially tested as a standalone component) demonstrated 5-fold vacuum-evaporative concentration. Polyethylene fused bead beds (PEFBBs; 50 porosity) store drylyophilized buffers, calibrants, and fluorescent dyes, and also promote mixing of sample with calibrant, dye, or H2O. Software-controlled automated tests demonstrated successful 1) fluid delivery to each component 2) valve and pump synchronization 3) sample aliquot delivery to instrument interface ports, and 4) rehydration of vacuum-dried fluorescent dye. In Figure 5, fluorescein on PEFBBs was rehydrated for 15 min using a pump-delivered water aliquot; it is displaced as H2O enters the bottom of the channel and pushes the dye into a check valve. Ultimately, SPLIce will fluorescently label amino acids in the sample for microchip-based electrophoretic (MCE) chiral separation and detection to seek and quantify key organic bio-signatures [5]; it will also deliver sample to a microfluidic version of WCL (mWCL) to measure soluble ions and redox-active species.
Life detection↗
Engineering Feasibility and Trade Studies for the NASA/VSGC MicroMaps Space Mission
Knowledge of airborne CO concentrations is critical for accurate scientific prediction of global scale atmospheric behavior. MicroMaps is an existing NASA owned gas filter radiometer instrument designed for space-based measurement of atmospheric CO vertical profiles. Due to programmatic changes, the instrument does not have access to the space environment and is in storage. MicroMaps hardware has significant potential for filling a critical scientific need, thus motivating concept studies for new and innovative scientific spaceflight missions that would leverage the MicroMaps heritage and investment, and contribute to new CO distribution data. This report describes engineering feasibility and trade studies for the NASA/VSGC MicroMaps Space Mission. Conceptual studies encompass: 1) overall mission analysis and synthesis methodology, 2) major subsystem studies and detailed requirements development for an orbital platform option consisting of a small, single purpose spacecraft, 3) assessment of orbital platform option consisting of the International Space Station, and 4) survey of potential launch opportunities for gaining assess to orbit. Investigations are of a preliminary first-order nature. Results and recommendations from these activities are envisioned to support future MicroMaps Mission design decisions regarding program down select options leading to more advanced and mature phases.
Abdelkhalik, Ossama O.↗
Thermal and nonthermal phenomena in solar flare loops at 20 cm wavelength and in X-rays
X-ray images from the P78-1 satellite are presented for a long-lasting burst at 20 cm wavelength mapped with the Very Large Array on May 19, 1979. The decimeter wave observations were originally interpreted in terms of two models, one invoking thermal electrons radiating at low harmonics of the gyrofrequency, and the other invoking mildly relativistic electrons emitting gyrosynchrotron radiation. If the 20 cm source is thermal, it should also be visible in soft X-rays, while if it is nonthermal, the soft X-ray emission should be weak or spatially or temporally distinct from the 20 cm burst. It is found that only one of the three 20 cm sources was approximately co-spatial with the soft X-ray source, and that it was only partially thermal. The 20 cm burst is therefore primarily decimeter type IV emission from mildly relativistic electrons of the post-flare phase. The over 2 hr lifetime and smooth temporal variation of the burst belie its nonthermal nature and suggest continuous acceleration as well as long-term storage of energetic electrons.
Schmahl, E. J.↗
Modeling the classical nova outburst. I - Exploring the physics of a new mechanism
Model calculations were performed to describe a mechanism that produces classical nova outbursts on white dwarfs of 1 solar mass or less and for accretion rates of 4 x 10 to the -10th solar mass/yr or greater, i.e., the parameters corresponding to observed data of nova systems. Calculations point to four factors that can induce nuclear runaways of sufficient strength to eject about 0.0001 solar mass at speeds of several hundred to a few thousand km per second, as is observed in classical novae. These are (1) the effects of storage of angular momentum in the star's envelope during the accretion phase; (2) the reduction of centrifugal forces in the star's outer layers during the early nuclear runaway phase, through the inward transport of angular momentum; (3) the inward movement of the zone of peak nuclear burning through the convectively induced shear instability during the runaway phase; and (4) the mixing of original CO stellar matter and H-rich matter, also through the convectively induced shear instability.
Kutter, G. Siegfried↗
Considerations For Waste-to-Base Future Research Paths
Developing innovative technologies to reprocess low value waste into high value base products will enable a new “Waste-to-Base” (WtB) capability leading to innovative approaches to space mission design. Systems engineers and mission architects will work together under a new paradigm in logistics planning. Equipment, components, packaging, storage, and structures will be understood not only by functional requirements, but also in terms of useful lifetimes and materials of construction. The advent of a new technical discipline - reprocess engineering - will grow from the intersection between chemical, mechanical, and systems engineering, mission design, and logistics planning. A crowdsourcing approach was employed to gather low Technology Readiness Level (TRL) concepts into workable solutions for issues in trash management, CO 2 processing, foam reprocessing, and fecal processing. The results of the crowdsourcing activities are summarized along with a discussion for future technology development work.
Logistics reduction↗
Reconstructing Magma Storage Depths for the 2018 Kilauean Eruption from melt inclusion CO2 Contents: The importance of Vapor Bubbles
The 2018 Lower East Rift Zone (LERZ) eruption of Kīlauea Volcano and the accompanying collapse of the summit caldera marked the most destructive phase of activity on Hawai’i in the last 200 years. The integration of petrological data extracted from lava samples collected throughout the eruption with geodetic data examining the caldera collapse event, and estimates of the co-erupted flux of SO2 from the main eruptive fissure (Fissure 8), provides an exceptional opportunity to determine the reservoir geometry and magma transport paths supplying Kīlauea’s LERZ. The forsterite contents of erupted olivines and the degree of disequilibrium with their carrier melts indicate that two distinct olivine populations were erupted from Fissure 8. Melt inclusion entrapment pressures reveal that more evolved olivines (Fo<81.5) crystallized at ~2 km depth within the shallower Halema’uma’u reservoir, while more primitive olivines (Fo>81.5)crystallized within the deeper South Caldera reservoir at ~3–5 km depth. Crucially, primitive olivines experienced extensive post-entrapment crystallization, driving the growth of a vapor bubble. Raman spectroscopy reveals that this bubble contains up to 99% of the total inclusionCO2 budget (median=93%). Measurements of CO2 in only the glass phase would have underestimated entrapment depths by up to 60× (median=11×), and the importance of the SC reservoir as a source of magma to Fissure 8 would have been overlooked. Overall, we demonstrate that Raman measurements of bubbles, along with careful choice of suitably-calibrated H2O-CO2 solubility model, is vital to place accurate constraints on the depths of magma storage regions supplying volcanic eruptions.
SIMS↗
Gravitropism in higher plant shoots. I - A role for ethylene
Two inhibitors of ethylene synthesis, Co(2+) and aminoethoxyvinylglycine (AVG), and two inhibitors of ethylene action, Ag(+) and CO2, are shown to delay the gravitropic response of cocklebur (Xanthium strumarium L.), tomato (Lycopersicon esculentum Mill.), and castor bean (Ricinus communis L.) stems. Gentle shaking on a mechanical shaker does not inhibit the gravitropic response, but vigorous hand shaking for 120 seconds delays the response somewhat. AVG and Ag(+) further delay the response of mechanically stimulated plants. AVG retards the storage of bending energy but not of stimulus. In gravitropism, graviperception may first stimulate ethylene evolution, which may then influence bending directly, or responses involving ethylene could be more indirect.
Wheeler, Raymond M.↗
Chemical stability of high-temperature superconductors
A review of the available studies on the chemical stability of the high temperature superconductors (HTS) in various environments was made. The La(1.8)Ba(0.2)CuO4 HTS is unstable in the presence of H2O, CO2, and CO. The YBa2Cu3O(7-x) superconductor is highly susceptible to degradation in different environments, especially water. The La(2-x)Ba(x)CuO4 and Bi-Sr-Ca-Cu-O HTS are relatively less reactive than the YBa2Cu3O(7-x). Processing of YBa2Cu3O(7-x) HTS in purified oxygen, rather than in air, using high purity noncarbon containing starting materials is recommended. Exposure of this HTS to the ambient atmosphere should also be avoided at all stages during processing and storage. Devices and components made out of these oxide superconductors would have to be protected with an impermeable coating of a polymer, glass, or metal to avoid deterioration during use.
Bansal, Narottam P.↗