Search NASA⌕ Search

SEARCH · Search NASA

Results for “CO2 injection monitoring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Subtask 1.5 – CO2 Injection Monitoring with an Optimized Scalable, Automated, Semipermanent Seismic Array

The scalable, automated, semipermanent seismic array (SASSA) method is a flexible and relatively cost-effective surface geophysical method for regular time-lapse monitoring of the movement of injected carbon dioxide (CO2) in a reservoir for CO2 enhanced oil recovery (EOR) or geologic CO2 storage operations. It has the advantages of a low-environmental-footprint while monitoring regions of a reservoir from the surface without the need for a regular grid distribution of receivers. Automated data collection is possible. As only time-lapse amplitude changes at the reservoir level due to CO2 movement within the reservoir are monitored, the turnaround time to deliver results from the SASSA method can be short, without the need for long, time-consuming data-processing workflows. As data is collected and processed, incremental information can be provided to the field operator. The Energy & Environmental Research Center (EERC) conducted a SASSA field test from September 2018 to November 2020 in a portion of the Bell Creek Field in Montana, which implemented new CO2 EOR field activities during the study period. Lessons learned from a proof-of-concept study were incorporated to improve the data quality of the SASSA method and demonstrate the viability of the technology. The EERC implemented several enhancements to improve data quality, including 1) an iterative survey design, which allowed placing the receivers in strategic locations where the movement of the CO2 in the reservoir could be tracked with minimum interference by the cultural noise in the study area; 2) the use of powerful seismic sources in the form of surface orbital vibrators, and 3) data acquisition during optimal periods. History-matched reservoir simulation was performed to predict gas saturation and pressure response induced by CO2 injection in the study area. The results were compared with the SASSA-measured responses to CO2 injection as a partial validation technique. A match between the two methods was observed for most of the SASSA points predicted to have intersected a CO2 saturation change. The validated results provide confidence that the SASSA method can be used independently as a CO2 saturation monitoring technique. As data are collected and processed, incremental information can be provided to the field operator. The critical components of the SASSA workflow for a successful application of the method are the following: Iterative survey design with information about CO2 injection activities from the oilfield operator. A detailed CO2 injection plan is the key driver to select the strategic monitoring location of the SASSA sensors. After this information is incorporated in the initial distribution of sources and receivers in the study area, high-resolution satellite images are used to identify ground locations not affected by cultural noise sources, such as power lines, pipelines/flow lines, or roadways. In the next iteration of the survey design, a scouting trip to the study area is needed to understand more details of the noise sources identified in the previous step and the intensity of the field activities that can also generate noise during the monitoring. Integrating the information from the scouting trip into the survey design to select the optimum source and receiver locations is the final step. Noise attenuation. The variety of noise types during seismic monitoring of an oil field is enormous. Tailored noise characterization and processing at a node-by-node level can enhance the performance and sensitivity of the SASSA technique. Future advancements that could improve the efficiency and application of the SASSA technology include: Gaining a better understanding of the noise field produced by the seismic source to aid the choice of receiver location. Surface noise from the source can overwhelm the small signal changes due to CO2 that the SASSA method measures. Improved data-processing workflow to automatically analyze and adapt to dynamic noise conditions associated with industrial settings. This subtask was funded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE- FE0024233.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2018

Time Lapse Charged Wellbore Casing Controlled Source Electromagnetic Surveys for Monitoring Injected Carbon Dioxide

Carbon dioxide (CO2) injection for enhanced oil recovery (EOR) and long-term carbon storage extends the life of an oil field while keeping CO2 out of the atmosphere. Monitoring CO2 migration during EOR operations is critical to maximizing production and detecting unexpected CO2 migration quickly. In this project, we monitor CO2 migration using time-lapse charged well casing controlled source electromagnetics (CSEM) at an active EOR site undergoing CO2 injection. Since the electrical conductivity of the reservoir changes as CO2 displaces other fluids, this novel survey technique aims to monitor CO2 injection effectively and unobtrusively from the surface via electromagnetic field measurements. Of four time-lapse field campaigns spaced over two years, we have completed two. Each campaign consists of a CSEM survey supplemented by magnetotelluric and time-domain electromagnetic surveys. In the CSEM survey, a transmitter delivers alternating current to the subsurface at frequencies from 0.125 Hz to 16 Hz using steel well casings as electrodes. Charged well casing surveys detect deeper conductivity contrasts than surveys that use only surface electrodes, allowing CO2 movement at the depth of the reservoir to be imaged more clearly. We transmit on two well pairs. One pair is oriented in the east-west direction, and the other is oriented in the northeast-southwest direction. Receiver stations measure orthogonal components of the electric and magnetic fields. The measurements are repeated at the same locations in each field campaign. Data differences between campaigns provide information about changes in the electrical conductivity of the subsurface. We present the latest results from this ongoing project, including modeling, survey design, data processing techniques, and preliminary results from the field campaigns.

Magnetic and electrical methods, Geomagnetic induc↗
DOE OSTI2018

High-resolution 3D seismic acquisition at the Tomakomai CO2 storage project, offshore Hokkaido, Japan

Monitoring injected CO2 is an important part of assuring permanence of long term storage to mitigate atmospheric emissions. Three-dimensional (3D) seismic has been shown to be an effective technology for visualizing and measuring subsurface geology and fluids. In this study, we demonstrate the successful acquisition, processing and initial interpretation of a high-resolution 3D (HR3D) seismic survey in Tomakomai, offshore Japan, above an active offshore CO2 injection site. The successful deployment of this novel marine seismic monitoring technology validates HR3D as an appropriate characterization and monitoring tool for large- demonstration and commercial-scale offshore Carbon Capture and Storage (CCS) sites.

Carbon Capture and Storage (CCS)↗
DOE OSTI2023

Seismic Monitoring at the Farnsworth CO2-EOR Field Using Time-Lapse Elastic-Waveform Inversion of 3D-3C VSP Data

During the Development Phase of the U.S. Southwest Regional Partnership on Carbon Sequestration, supercritical CO2 was continuously injected into the deep oil-bearing Morrow B formation of the Farnsworth Unit in Texas for Enhanced Oil Recovery (EOR). The project injected approximately 94 kilotons of CO2 to study geologic carbon storage during CO2-EOR. A three-dimensional (3D) surface seismic dataset was acquired in 2013 to characterize the subsurface structures of the Farnsworth site. Following this data acquisition, the baseline and three time-lapse three-dimensional three-component (3D-3C) vertical seismic profiling (VSP) data were acquired at a narrower surface area surrounding the CO2 injection and oil/gas production wells between 2014 and 2017 for monitoring CO2 injection and migration. With these VSP datasets, we inverted for subsurface velocity models to quantitatively monitor the CO2 plume within the Morrow B formation. We first built 1D initial P-wave (Vp) and S-wave (Vs) velocity models by upscaling the sonic logs. We improved the deep region of the Vp and Vs models by incorporating the deep part of a migration velocity model derived from the 3D surface seismic data. We improved the shallow region of 3D Vp and Vs models using 3D traveltime tomography of first arrivals of VSP downgoing waves. We further improved the 3D baseline velocity models using elastic-waveform inversion (EWI) of the 3D baseline VSP upgoing data. Our advanced EWI method employs alternative tomographic and conventional gradients and total-variation-based regularization to ensure the high-fidelity updates of the 3D baseline Vp and Vs models. We then sequentially applied our 3D EWI method to the three time-lapse datasets to invert for spatiotemporal changes of Vp and Vs in the reservoir. Our inversion results reveal the volumetric changes of the time-lapse Vp and Vs models and show the evolution of the CO2 plume from the CO2 injection well to the oil/gas production wells.

42 ENGINEERING↗
DOE OSTI2018

Devising a framework to Couple Electromagnetic Geophysical Measurements with Reservoir Simulations to Monitor CO2 Plume Movement

Monitoring CO2 plume movement and extent is critical to any CO2 utilization and storage (CCUS) project but can present significant challenges. Downhole measurements (such as cross-well seismic) can give the resolution needed to track the CO2 plume. That resolution comes at a significant expense in equipment and lost production time, and the resolution is only in the vicinity of that well. Surface seismic is less expensive but has decreasing resolution with depth and may not be sensitive to changes in the CO2 plume. Conversely, electrical conductivity has been shown to be correlated with changes in phase saturation associated with CCUS operations. A novel approach for subsurface monitoring that can be applied with minimal expense and operation disruption is charged wellbore casing controlled-source electromagnetics (CWC-CSEM). This technique injects electrical current into two legacy wells. Surface measurements of the induced electric and magnetic fields are obtained with distributed data loggers. Time-lapse measurements are sensitive to changes in CO2 plume movement, but inversion requires the application of prior knowledge from prior characterization efforts. We propose a methodology where simulations are used to inform CWC-CSEM inversion while simultaneously being validated. As such, uncertainty is reduced, and more robust flow models can be devised. A three-year study is underway at the Bell Creek Field in southeast Montana (DOE-NETL Project DE-FE0028320) to evaluate the effectiveness of CWC-CSEM on an active CO2-EOR operation. Determining the relationship between electrical resistivity and phase saturations, and coupling that to a reservoir model is the thrust of this project. Initially, the relative permeability/capillary pressure relationship and the compositional oil model were identified as model parameters with high uncertainty. To elucidate the impact of these uncertain parameters, simulations were run for ten years with a single five-spot pattern. Final water saturation distributions were converted into resistivity using Archie’s Law and available fluid sampling data to provide an exploration of the time lapse electromagnetic anomaly which can be anticipated using CWC-CSEM methods. This technique has promise as an inexpensive and accurate way to monitor CO2 injection in a CCUS site.

Moodie, Nathan↗
DOE OSTI2018

SECARB Bottom Hole Gravity Data

Borehole gravity measurements obtained during the SECARB project at the Cranfield oil site in Mississippi from CFU31-F2 and CFU31-F3 wells. Data was used to calculate density changes within the Cranfield reservoir and to test borehole gravity performance compared to a variety of other methods for monitoring the injected CO2 plume. Associated Publications: Dodds, K., Krahenbuhl, R., Reitz, A., Li, Y., Hovorka, S. D., 2013, Evaluation of time lapse borehole gravity for CO2 plume detection SECARB Cranfield: International Journal of Greenhouse Gas Control.

Borehole↗
DOE OSTI2021

Pulsed Neutron Capture for monitoring CO2 Storage with Enhanced Oil Recovery in Northern Michigan

Pulsed neutron capture (PNC) logging has been used as part of the Midwest Regional Carbon Sequestration Partnership (MRCSP) monitoring of CO2 injection and storage during assessment of enhanced oil recovery (EOR) in several northern Niagaran trend reefs in Michigan. A total of four reefs were selected for these studies to monitor CO2 migration and to test the viability and effectiveness of the PNC technology on reefs in various stages (depleted, active and new reefs) of CO2-EOR activities.

Bagley↗
DOE OSTI2019

Validating compositional fluid flow simulations using 4D seismic interpretation and vice versa in the SECARB Early Test—A critical review

We report on strengths and weaknesses of 4D seismic interpretation as a technique for monitoring carbon dioxide that was injected as part of a large scale test associated with commercial enhanced oil recovery (EOR) at Cranfield Field, Mississippi, USA. The goals of the monitoring effort are 1) to make measurements to verify that the CO 2 is contained in the reservoir according to operational designs and model predictions, and 2) that if there are deviations, to provide data which can be used to update the earth models and determine if any mitigation is needed. Our work uses a compositional numerical simulation to model CO 2 flow in the reservoir and compares the results with estimates of changes in seismic properties between a pre-injection and a survey after more than 2 million metric tons injected. The complicated physics of the problem in Cranfield field present challenges to seismic interpretations. These findings reflect partial agreement between the results of the numerical simulation and the seismic interpretations. Possible causes of discrepancies among the fluid flow model and multiple interpretations of the same seismic data sets performed with different work flows illuminates the types of uncertainties that should be considered to achieve the goals of monitoring.

4D seismic↗
DOE OSTI2019

Integrated model construction for CO2-EOR monitoring via charged-wellbore casing controlled-source electromagnetics

We present a method for the integrated development of 3D electrical conductivity models for CO2-EOR monitoring with charged wellbore casing controlled-source electromagnetics (CWC-CSEM). The model is constructed through the multiphysics integration of reservoir simulation, seismic, borehole resistivity, and transient EM (TEM) data. The process is performed in two stages. First, a large background conductivity model is constructed from the combination of seismic, borehole, and TEM data. Second, a more detailed and dynamic component of the model is created within the production interval by converting the reservoir simulation parameters to conductivity through Archie’s equation. In this presentation, we demonstrate the complete workflow for building these 3D conductivity site models that can be updated throughout production using the Bell Creek oil field as an example. We then show application of the developed site model to simulating the predicted CWC-CSEM data as one step in the larger problem of reservoir imaging and monitoring of injected CO2 during enhanced oil recovery.

CO2, Sequestration, Monitoring, time-lapse, reserv↗
DOE OSTI2019

Frio 2 : Raw CASSM Datasets

This submission contains the raw SEG-2 seismic datasets acquired in the CASSM experiment, part of the Frio-2 GCS pilot. The directory also includes the log files generated by the Geode seismograph (geometrics) used during acquisition. All SEG-2 files have a ".dat" suffix and log files have a ".log" suffix. Various supplementary files are also included (see below) including a set of flow and seismic models used in interpretation. The earlyGathers.tar.gz resource includes raw data acquired during system testing and pre-injection periods. All files correspond to the single source continuous active source seismic monitoring (CASSM) dataset described in the following papers. Daley, T.M., Solbau, R.D., Ajo-Franklin, J.B., and Benson, S.M. 2007, “Continuous Active-Source Seismic Monitoring of CO2 Injection in a Brine Aquifer”, Geophysics, Vol. 72, No. 5, p. A57-A61 Daley, T., Ajo-Franklin, J.B., and C. Doughty, 2011, “Constraining the reservoir model of an injected CO2 plume with crosswell CASSM at the Frio-II Brine Pilot”, International Journal of Greenhouse Gas Control (IJGGC), Vol. 5, No. 2, pp. 1022-1030. Zhu, T., Ajo-Franklin, J., and T. Daley, 2017, “Spatio-temporal changes in seismic attenuation caused by injected CO2 at the Frio-II pilot site, Dayton TX, USA”, Journal of Geophysical Research – Solid Earth, Vol. 122, No. 9, pp. 7156-7171. cassmDataRaw.tar : The main tar file containing all of the SEG-2 field records and the Geode log files. Stacking, time sampling (dt), and date information should be in the .log file. Each file corresponds to a single stacked gather for the single source deployed. Data was recorded on a 24 channel downhole hydrophone array. fieldNotes.tar : contains some of the scanned observer logs from the experiments as well as some planning images fieldPhotos.tar : contains a small set of photographs taken during the experiment frio_flow_seismic_models.mat : a matlab structure containing a set of flow and seismic models used in interpreting the CASSM data (see IJGGC paper).

GCS↗