Search NASA⌕ Search

SEARCH · Search NASA

Results for “COAL PREPARATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Field Survey of Rare Earth Element Concentrations in Process Streams Produced by Coal Preparation Plants in the Eastern USA

I this work, a field study was undertaken to experimentally measure the concentrations of rare earth elements (REEs) contained in the process streams generated by a group of 20 coal preparation plants located in the eastern USA. For each site, representative samples of clean coal product, coarse refuse, and fine refuse were collected. Each sample was then partitioned into preselected size and density classes by wet screening/sieving and float-sink testing. The resultant products were dried and subjected to laboratory analyses to determine ash contents and rare earth element concentrations including Yttrium and Scandium. A detailed analysis of the database generated by this exercise showed that coal-based products from these preparation plants contained significant quantities of rare earth elements. In particular, the coarse refuse streams currently discarded by the 20 plants examined were found to contain a sufficient tonnage of REEs to satisfy the current domestic demand for these important elements. The data also showed a strong positive correlation between ash content and REE concentration, which suggested that the primary association of REEs in eastern USA bituminous coal sources is likely within fractions containing inorganic impurities. This association was well described using a simple power equation relating ash content and REE concentration. The ratio of heavy-to-light rare earth elements was discovered to be significantly higher in organically rich fractions of clean coal, suggesting that mineral impurities intimately associated with carbonaceous matter have elevated concentrations of heavy rare earth elements. A similar trend was observed for a grouping of rare earth elements (Y, Nd, Eu, Tb, and Dy) that are likely subject to near-term supply shortages. Finally, the database showed that a linear correlation existed between La for many REEs of interest, although there were several notable exceptions for some high-value REEs (Lu, Pr, and Tb).

01 COAL, LIGNITE, AND PEAT↗

2009 coal preparation buyer's guide

The guide contains brief descriptions and contact details of 926 US companies supplying coal preparation equipment who exhibited at the 26th annual Coal Prep exhibition and conference, 28-30 April - May 2009, in Lexington, KY, USA. An index of categories of equipment available from the manufacturers is included.

01 COAL, LIGNITE, AND PEAT↗

Optimizing slurry separation in coal preparation

In processing slurry with cationic polyelectrolytes, the final concentration of the suspended particulates in the water beyond the slurry tank in the coal-preparation shop is no more than 10 mg/l. Consequently, this water may be reused in industrial systems.

01 COAL, LIGNITE, AND PEAT↗

Assessing the Extractability of Rare Earth Elements from Coal Preparation Fines Refuse Using an Organic Acid Lixiviant

We report that this work is a first-order study to assess the suitability of an organic acid lixiviant to extract rare earth elements (REE) from coal preparation fines refuse sourced from a Pennsylvania mine with a total REE of ~ 300 ppm. The extraction of REE using an organic acid, in this case 0.1 M citric acid and 0.5 M trisodium citrate solution, is compared against 0.5 M (NH 4 ) 2 SO 4 , 1 M HCl, 1.2 M H 2 SO 4 , and 0.5 M ethylenediaminetetraacetic acid (EDTA). Ashing the coal waste material prior to leaching tests with the citrate solution nominally improved REE extraction. Buffered citrate solution recovered 7% of the total REE in the as-received Isabella Fines as compared to 11% in ashed samples, whereas (NH 4 ) 2 SO 4 extracted 5–6%, respectively. EDTA recovered up to 33% of the total REE, most likely due to the higher coordination chelate bond. Mineral acids, however, outperformed the organic acids on ashed material (16–52% REE recovery), suggesting that organic acids may not be a suitable competitive option for REE extraction from these types of feedstocks.

01 COAL, LIGNITE, AND PEAT↗

Illinois No. 6 Coal Preparation Facility Assembly, Construction

Calculates the number of each type of equipment required to prepare Illinois No. 6 bituminous coal for transport from an underground coal mine. Includes the following facilities: silo, stacker, crusher facility, cleaning facility, and WWTP. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=723EEC87-361E-4ACC-89AB-5E885F9A079A

01 COAL, LIGNITE, AND PEAT↗

Elemental Modes of Occurrence in an Illinois #6 Coal and Fractions Prepared by Physical Separation Techniques at a Coal Preparation Plant

In order to gain better insight into elemental partitioning between clean coal and tailings, modes of occurrence have been determined for a number of major and trace elements (S, K, Ca, V, Cr, Mn, Fe, Zn, As, Se, Pb) in an Illinois No.6 coal and fractions prepared by physical separation methods at a commercial coal preparation plant. Elemental modes of occurrence were largely determined directly by XAFS or Moessbauer spectroscopic methods because the concentrations of major minerals and wt.% ash were found to be highly correlated for this coal and derived fractions, rendering correlations between individual elements and minerals ambiguous for inferring elemental modes of occurrence. Of the major elements investigated, iron and potassium are shown to be entirely inorganic in occurrence. Most (90%) of the iron is present as pyrite, with minor fractions in the form of clays and sulfates. All potassium is present in illitic clays. Calcium in the original coal is 80-90% inorganic and is divided between calcite, gypsum, and illite, with the remainder of the calcium present as carboxyl-bound calcium. In the clean coal fraction, organically associated Ca exceeds 50% of the total calcium. This organically-associated form of Ca explains the poorer separation of Ca relative to both K and ash. Among the trace elements, V and Cr are predominantly inorganically associated with illite, but minor amounts (5-15% Cr, 20-30% V) of these elements are also organically associated. Estimates of the V and Cr contents of illite are 420 ppm and 630 ppm, respectively, whereas these elements average 20 and 8 ppm in the macerals. Arsenic in the coal is almost entirely associated with pyrite, with an average As content of about 150 ppm, but some As ({approx} 10%) is present as arsenate due to minor oxidation of the pyrite. The mode of occurrence of Zn, although entirely inorganic, is more complex than normally noted for Illinois basin coals; about 2/3 is present in sphalerite, with lesser amounts associated with illite and a third form yet to be conclusively identified. The non-sulfide zinc forms are removed predominantly by the first stage of separation (rotary breaker), whereas the sphalerite is removed by the second stage (heavy media). Germanium is the only trace element determined to have a predominantly organic association.

01 COAL, LIGNITE, AND PEAT↗

Optimized controls for thickeners

Tailings thickeners are often run inefficiently as they lack a reliable bed level interface transmitter and a turbidity transmitter to give feedback on how the flocculant dosing system is working. Hawk Measurement Systems has developed a range of multiple crystal array sonar transducers capable of penetrating suspended solids to give reliable performance measuring the heavy density bed level. The second channel can be used to give turbidity output. In a case study reported, the system was provided for a coal preparation plant processing multiple coal types with different settling characteristics. 1 fig., 3 photos

01 COAL, LIGNITE, AND PEAT↗

Structure and Reactivity of Low-Rank Coal Chars Prepared from Fluidized Bed and Moving Bed Pyrolyzers and the Potential for Using Them in Pulverized Coal Injection (PCI)

Utilizing pyrolysis chars as the injection fuel in a blast furnace can reduce the dependence on high-quality pulverized coal injection (PCI) coal. In this study, the physical properties and reaction characteristics of chars prepared from two different industrial-scale pyrolyzers (fluidized bed and moving bed) are investigated. The results reveal remarkable component segregation in the char particles with different particle sizes. The properties of large-size char particles are found to better satisfy the PCI fuel requirement in a blast furnace. Compared with PCI coal, the char particles exhibit a rough surface, well-developed pore structure, and less-ordered chemical structure of carbon. Results from isothermal combustion, isothermal gasification, and drop tube furnace experiments show that both types of chars exhibit a better reactivity than PCI coal. The excellent reactivity of chars is closely related to its high Brunauer–Emmett–Teller surface area and relatively poor chemical ordering during conversion. Based on these characteristics, both fluidized bed char (FBC) and moving bed char (MBC) have a great potential to be used as PCI fuels. The application method of chars for PCI in a blast furnace is proposed finally.

01 COAL, LIGNITE, AND PEAT↗

Grinding away

Coal preparation in gasification plants is all too often neglected. The coal gasification industry has experienced enormous growth over the last few years and consequently the demand of coal grinding and drying has also increased. The design and development of coal mills has taken great strides since the first coal grinding plant was delivered to an IGCC power plant in Buggenum, Netherlands. The article describes a typical flow sheet for a coal gasification plant with a possibility of feeding the mill with different types of materials besides coal. 5 figs.

01 COAL, LIGNITE, AND PEAT↗

2009 Coal Age Buyers Guide

The buyers guide lists more than 1200 companies mainly based in the USA, that provide equipment and services to US coal mines and coal preparation plants. The guide is subdivided by product categories.

01 COAL, LIGNITE, AND PEAT↗

2009 Industry-Wide Buyer's Guide

The guide lists US companies supplying equipment and services to coal mining and coal preparation operations. An index by product category is included.

01 COAL, LIGNITE, AND PEAT↗

Liberation and release of rare earth minerals from Middle Kittanning, Fire Clay, and West Kentucky No. 13 coal sources

Here, a laboratory REE release test procedure was designed to better understand the association and liberation characteristics of rare earth elements (REEs) from coal-based material, such as coal middlings and refuse. For this particular study, three samples of mixed-phase, middling material was collected from three coal preparation plants operating in three different coal basins and coal seams, namely Fire Clay, Middle Kittanning, and West Kentucky #13. In these release tests, the mixed-phase material was first ground in a laboratory ball mill for a designated amount of time and subsequently decarbonized using staged flotation. The REE content of the high ash tailings and low ash concentrate was determined, and the process was repeated for various target grind sizes down to the micron range. The results indicate that smaller grind sizes produce increased REE concentrations in the high ash tailings, and this result is predominantly driven by the increased ash content in the decarbonized tailings. The grinding characteristics of the Fire Clay coal source showed that more energy is needed to achieve the desired particle size reduction; however further size reduction of this sample resulted in a significantly higher ash and REE content in the tailings material due to improved liberation. For the Middle Kittanning and West Kentucky #13 sources, the grinding and release data indicates that the mineral matter is liberated at a coarser particle size, and micronizing the coals only produces marginal improvements in rare earth mineral liberation and recovery.

01 COAL, LIGNITE, AND PEAT↗

Coal, Train Transport

Transport of an unspecified type of prepared coal via train to the energy conversion facility. Assumes backhaul and front haul have the same energy intensity. Includes diesel consumption and fugitive dust emissions. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=253D6350-B17B-434B-8D5C-F5DC671C7D3B

01 COAL, LIGNITE, AND PEAT↗

Jim Walter Resources installs new overland conveyor

Embarking on a major expansion plan, the company is constructing a new additional overland conveyor coal to a recently refurbished prep plant. Jim Walter Resources recently invested $20 million in a new 5-mile overland conveyor system to haul coal from the No.7 deep coal mine in Alabama to the No.5 coal preparation plant. The size of the No.7 mine was effectively doubled. The article describes how this expansion move was decided upon and describes the design and installation of the new conveyor which spans approximately 5 miles. 4 photos.

01 COAL, LIGNITE, AND PEAT↗

A high-performance drive for the rotary coal breaker application

This paper considers recent advances made within the field of electric drives and how this new technology might be best applied within the mining industry. A case study is presented showing simulated results of the performance of the electric drives in a coal preparation plant. The various starting methodologies (resistance starting, fluid coupling, V/f = const, and vector control) are compared within this application. The merits of each method are then discussed with regard to the specific application and other more generic applications within the mining industry. Application of a rotor flux orientation control drive is substantiated, and its superior performance under start and stall conditions to that of the currently implemented system is confirmed by theoretical analysis and simulations. Experimental results for a scale model of the candidate system are presented, which agree with the main conclusions of this paper.

01 COAL, LIGNITE, AND PEAT↗