Search NASA⌕ Search

SEARCH · Search NASA

Results for “COBALT 73”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Nuclear Data Sheets for A=73☆

Experimental nuclear structure data for the known A=73 isobaric nuclides (Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Kr, Rb and Sr) have been evaluated, and presented together with Adopted properties of level energies, and associated γ rays. The decay data for these nuclides have also been evaluated, providing Adopted values of γ and β radiations, and log ft values. For {sup 73}Mn, only the isotopic identification has been established, with no knowledge of its g.s. half-life. For {sup 73}Fe, {sup 73}Co and {sup 73}Sr, only the ground states and their half-lives are known with no information about the excited states. For {sup 73}Ni, {sup 73}Cu, {sup 73}Zn and {sup 73}Rb, little data are available for excited states. The half-life and decay modes of possibly proton-unbound {sup 73}Rb need firmly established. {sup 73}Ga structure presents a special challenge in that the 1/2{sup −} ground state and the first 3/2{sup −} state have recently been proposed, in a Coulomb excitation experiment by 2010Di14, to form an almost degenerate doublet with an estimated spacing of 229 Th with its first excited state at 7.8 eV, and {sup 235}U with its first excited state at 76 eV. Ultra-high resolution gamma-ray spectroscopic studies are warranted to search for the low-lying (73 Ga, and to determine its half-life. Level structures of {sup 73}Ga, {sup 73}Ge, {sup 73}As, {sup 73}Se, {sup 73}Br and {sup 73}Kr are quite well known, although decay schemes of radioactive ground states of {sup 73}Co, {sup 73}Cu and {sup 73}Br are considered incomplete. The reactions and decays for which no new experimental information has become available since the 2003 update have undergone revisions to incorporate conversion coefficients from BrIcc code, and evaluated Q values from 2017Wa10, but essential content of such datasets may have remained the same as in previous evaluations. In this respect the present work greatly benefited from all the previous NDS evaluations (2004Si08,1993Ki25,1987Ki13, 1980Ek01,1974Al33), but at the same time data presented herein supersede all the previous published evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Activity Estimations for HSA Co-60 targets for Cycles 168A, 168B, and 169A Memo

67 HSA cobalt targets have been irradiated in the ATR, starting back on 2/10/15. Individual HSA cobalt targets may have been moved to different positions and irradiated at different times in the ATR. A tool called the Isotope Production and Activation tool (IPA tool) was developed to capture the changes for different irradiation conditions. The IPA tool uses cross section and flux data, cycle history data, and HSA experiment positioning data to estimate a range of specific activities for each of the HSA cobalt targets to generate SCALE/ORIGENS inputs for each target. The IPA tool also post-processes the results for use in tables and figures. The IPA tool derived results that can be independently verified using an acceptable alternative method. The memo contains the specific activity for all 67 HSA cobalt targets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Evaluating Photocatalysts Using Gamma Radiation

A large amount of attention has been given to photocatalysts using UV radiation as the source of excitation; however, little work has been done to study photocatalysis using higher energy excitation sources, such as gamma or x-rays. During excitation, the photocatalyst absorbs light to produce electron-hole pairs (excitons). These excitons can react with absorbed species to yield reactive radical species that can degrade compounds or induce redox (oxidation-reduction) reactions. Common examples of semiconductor photocatalysts include: TiO{sub 2}, ZnO, Fe{sub 2}O{sub 3}, ZrO{sub 2}, and SnS. This project was conducted to investigate the photocatalytic oxidation of iron using gamma irradiation and several different semiconductor photocatalysts. Photometric Measurements: Photometric determination of Fe{sup II} and Fe{sup III} were made using a Cary 60 UV-Vis Spectrometer over a range of 800 - 200 nm at a scan rate of 60 nm/sec. Ferric (Fe{sup III}) ions have no detectable UV-vis spectrum, thus the absence of a peak in iron-based samples was taken as evidence of Fe{sup III} formation. Solution Preparation: Iron II (Fe{sup II}) standards were made by dissolving FeCl{sub 2}.6H{sub 2}O in deionized water using a sonicator. A solution of 1,10- phenanthroline was made by adding 40 mg of 1,10-phenanthroline to 20 mL of deionized water and sonicating for 60 minutes until a clear solution was obtained. Gamma Radiation Tests: Irradiated samples were exposed to Co-60 gamma radiation (1.17 MeV gamma) at a dose rate of ∼1 x 10{sup 5} Rad/hr Co-60. All samples were irradiated in glass scintillation vials. The presence of 30 mg of SnS reduces the amount of Fe{sup II} in solutions under gamma irradiation relative to samples with no SnS added. Fe{sup II} concentration decreases as irradiation time increases. This effect is enhanced when SnS is present. Fe{sup II} appears to decrease linearly with time. We found that the addition of SnS semiconductor, when combined with gamma radiation, oxidized more Fe{sup II} in the FeCl{sub 2} solution than gamma radiation alone. This suggests that SnS can be used as a photocatalyst using gamma radiation as the excitation source, although more detailed experiments are needed to confirm this belief. The next phase of this project would be to refine the preliminary results by determining exact quantities of SnS semiconductor and gamma radiation that induce sufficient redox. Repeated experiments with more samples could also give more data points for a chance at more representative and accurate data with error bars and standard deviations. Also, other semiconductors could possibly be tested to see how their effect on redox chemistry compares to that of SnS. The scope of this project could also be extended to include other metal or organic solutions to see if similar redox could be obtained.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Analysis of SCALE Criticality and Sensitivity Calculations for Reflected HEU Cylinders

The SCALE code package offers multiple nuclear data libraries and sensitivity and uncertainty (S/U) methods supporting and derived from Monte Carlo (MC) transport. The CSAS and TSUNAMI-3D sequences use KENO MC, utilizing either continuous-energy (CE) cross sections or multigroup (MG) cross section libraries. TSUNAMI-3D has two CE calculational methods: the iterated fission probability (IFP) method, and the Contribution-Linked eigenvalue sensitivity/Uncertainty estimation via Tracklength importance CHaracterization (CLUTCH) method. Previous work has shown poor agreement between CLUTCH and confirmatory direct perturbation calculations in specific applications (e.g., fissionable and polyethylene reflectors). The HEU-MET-FAST-084 (HMF-084) International Criticality Safety Benchmark Evaluation Project evaluation consists of 27 cylindrical highly enriched uranium metal cores with 14 unique reflector materials of 0.5 and 1 in. thicknesses. Included in this list of reflector materials are natural uranium and polyethylene. This work utilized SCALE 6.2.4 models of the HMF-084 evaluation, with additional non-physical configurations to test both the MG bias and CLUTCH functionality across a variety of reflector material thicknesses. The evaluation’s use of concentric cylinders allowed for examination of several MG self-shielding methods: infinite homogenous, cylindrical, and spherical. The results indicate that the use of polyethylene reflectors with CLUTCH is not fundamentally impossible but sensitive to geometry. The poor performance of CLUTCH with fissionable reflectors was reaffirmed. The 2 in. and greater polyethylene-reflected calculations demonstrate the necessity of using the 302-group library for fast systems. The nickel MG bias was substantial, as discussed in a companion paper, as were cobalt and iron.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Nuclear Data Sheets for A=59☆

-- Abstract: Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 59}Sc, {sup 59}Ti, {sup 59}V, {sup 59}Cr, {sup 59}Mn, {sup 59}Fe, {sup 59}Co, {sup 59}Ni, {sup 59}Cu, {sup 59}Zn, {sup 59}Ga, and {sup 59}Ge. This evaluation for A=59 supersedes the earlier one by C. M. Baglin (2002Ba42) and updates for some nuclides in the ENSDF database. Highlights: of this evaluation are the following: In {sup 59}Fe, a new level at 568.45 keV (3/2{sup −}) has been added. This resolves a doublet at 570 keV, which was reflected in earlier evaluations (1983An22, 1993Ba85, 2002Ba42) and literature as well. Conflicting spin assignments for 2153.62 keV level of {sup 59}Co [9/2,13/2 in (α,pγ); (13/2) in ({sup 15}N,4nγ); 15/2 in (p,p′γ), (7/2{sup −}) in (n,n′γ)] exist in the literature and additional experimental work is needed to resolve the issue.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Nuclear Data Sheets for A=50

The experimental nuclear structure and decay data are evaluated for all the known nuclides of mass 50 (Cl, Ar, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni). Here, detailed evaluated nuclear structure information are presented in individual decay and reaction datasets and the best values are recommended in the Adopted dataset for level properties, γ and β radiations, and other spectroscopic information. No excited states are known in 50Cl and 50Ni, and limited information is available for 50 Ar, 50 K, 50 Fe and 50 Co. This work supersedes earlier evaluations of A=50 by 2011El01, 1995Bu09, 1990Bu18, 1984Al29, and 1976Au07.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

A novel method for resonant inelastic soft X-ray scattering via photoelectron spectroscopy detection

A method for measuring resonant inelastic X-ray scattering based on the conversion of X-ray photons into photoelectrons is presented in this paper. The setup is compact, relies on commercially available detectors, and offers significant flexibility. Finally, this method is demonstrated at the Linac Coherent Light Source with ~0.5 eV resolution at the cobalt L 3 -edge, with signal rates comparable with traditional grating spectrometers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Proteogenomic Analysis of Burkholderia Species Strains 25 and 46 Isolated from Uraniferous Soils Reveals Multiple Mechanisms to Cope with Uranium Stress

Two Burkholderia spp. (strains SRS-25 and SRS-46) were isolated from high concentrations of uranium (U) from the U.S. Department of Energy (DOE)-managed Savannah River Site (SRS). SRS contains soil gradients that remain co-contaminated by heavy metals from previous nuclear weapons production activities. Uranium (U) is one of the dominant contaminants within the SRS impacted soils, which can be microbially transformed into less toxic forms. We established microcosms containing strains SRS-25 and SRS-46 spiked with U and evaluated the microbially-mediated depletion with concomitant genomic and proteomic analysis. Both strains showed a rapid depletion of U; draft genome sequences revealed SRS-25 genome to be of approximately 8,152,324 bp, a G + C content of 66.5, containing a total 7604 coding sequences with 77 total RNA genes. Similarly, strain SRS-46 contained a genome size of 8,587,429 bp with a G + C content of 67.1, 7895 coding sequences, with 73 total RNA genes, respectively. An in-depth, genome-wide comparisons between strains 25, 46 and a previously isolated strain from our research (Burkholderia sp. strain SRS-W-2-2016), revealed a common pool of 3128 genes; many were found to be homologues to previously characterized metal resistance genes (e.g., for cadmium, cobalt, and zinc), as well as for transporter, stress/detoxification, cytochromes, and drug resistance functions. Furthermore, proteomic analysis of strains with or without U stress, revealed the increased expression of 34 proteins from strain SRS-25 and 52 proteins from strain SRS-46; similar to the genomic analyses, many of these proteins have previously been shown to function in stress response, DNA repair, protein biosynthesis and metabolism. Overall, this comparative proteogenomics study confirms the repertoire of metabolic and stress response functions likely rendering the ecological competitiveness to the isolated strains for colonization and survival in the heavy metals contaminated SRS soil habitat.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Novel Ground States and Phase Transitions in Cobalt-Based Compounds and Heterostructures. Final report, 03/15/2006 - 03/14/2019

This final report summarizes work performed over a 12-year period at the University of Minnesota, focused on magnetic and electronic properties of complex oxide materials, particularly studied with neutron scattering methods. These materials are of high basic scientific interest, but at the same time underpin some key energy technologies. The final report provides a succinct summary of the technical achievements, scientific advances, and technological relevance of the research. Specific products from the research include 55 high quality journal publications, and 73 invited presentations on this scientific content. The results of this work have thus been disseminated broadly, to a variety of scientific and engineering audiences.

36 MATERIALS SCIENCE↗
DOE OSTI2018

α-Fe2O3/rGO nanospindles as electrode materials for supercapacitors with long cycle life

Highlights: • Spindle-like α-Fe{sub 2}O{sub 3} and reduced graphene (rGO) composites have been synthesized by a simple hydrothermal method. • The synthesized samples exhibit excellent electrochemical performance with high specific capacitance. • The ASCs exhibit outstanding capacitance performance with maximum energy density. - Abstract: Spindle-like α-Fe{sub 2}O{sub 3} and reduced graphene (rGO) composites have been synthesized by a simple hydrothermal method. The synthesized samples exhibit excellent electrochemical performance with high specific capacitance and good cycling life of about 87.5% reserved after 10,000 cycles. A solid-state asymmetric supercapacitor (ASC) with 1.5 V Voltage has been assembled using α-Fe{sub 2}O{sub 3}/rGO composite anode and the NiCo{sub 2}O{sub 4} nanowires cathode. The ASCs exhibit outstanding capacitance performance with maximum energy density of 73 Wh kg{sup −1} at the power density of 1357 W kg{sup −1}, and more than 219% capacitance retention after 10,000 cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Stabilizing *CO 2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO 2 Reduction

Abstract CO 2 electroreduction (CO 2 R) operating in acidic media circumvents the problems of carbonate formation and CO 2 crossover in neutral/alkaline electrolyzers. Alkali cations have been universally recognized as indispensable components for acidic CO 2 R, while they cause the inevitable issue of salt precipitation. It is therefore desirable to realize alkali‐cation‐free CO 2 R in pure acid. However, without alkali cations, stabilizing *CO 2 intermediates by catalyst itself at the acidic interface poses as a challenge. Herein, we first demonstrate that a carbon nanotube‐supported molecularly dispersed cobalt phthalocyanine (CoPc@CNT) catalyst provides the Co single‐atom active site with energetically localizeddstates to strengthen the adsorbate‐surface interactions, which stabilizes *CO 2 intermediates at the acidic interface (pH=1). As a result, we realize CO 2 conversion to CO in pure acid with a faradaic efficiency of 60 % at pH=2 in flow cell. Furthermore, CO 2 is successfully converted in cation exchanged membrane‐based electrode assembly with a faradaic efficiency of 73 %. For CoPc@CNT, acidic conditions also promote the intrinsic activity of CO 2 R compared to alkaline conditions, since the potential‐limiting step, *CO 2 to *COOH, is pH‐dependent. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts and devices for acidic CO 2 R.

Chemistry↗
DOE OSTI2024

Gamma, electron beam and X-ray irradiation effects on polymers in an advanced bone cement mixer device

The medical device industry has been investigating ways to increase the use of alternatives to cobalt-60 gamma radiation and ethylene-oxide gas sterilization, such as electron beam (E-beam) and X-ray radiation, due to regulatory and market pressures. One impediment to switching to E-beam or X-ray technology for sterilization is the lack of data on the effects of these radiation sources on medical device polymers. To provide such data this work considers irradiation and testing of a common single-use medical bone cement mixing system, the Stryker Advanced Cement Mixer (ACM®), that is composed of seven polymer materials. The ACM® devices considered here were processed to sterilization-relevant doses (15, 25, 50, and 70 kGy) using three radiation technologies: gamma, E-beam, and X-ray. The system and its polymer components were tested for product functionality, as well as mechanical and visual properties to determine how exposure effects may be influenced by radiation technology and dose level. We found that although there were instances of statistically significant differences in effects between the gamma-irradiated products and those irradiated with E-beam and X-ray, those effects were negligible in terms of retained functionality of the product and retained mechanical properties of the polymer components. Overall, results of this study demonstrate that, for of the effects studied, E-beam and X-ray are viable alternatives to cobalt-60 gamma radiation for sterilization of the polymer-based device investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1985

Relative abundances of sub-iron to iron nuclei in low energy (50-250 MeV/N) cosmic rays as observed in the Skylab experiment

A Lexan polycarbonate detector exposed on the exterior of Skylab-3 for 73 days during a solar quiet period was used to study the relative abundances of calcium to nickel ions in low energy cosmic rays of 50 to 250 MeV/N. The method of charge identification is based on the measurement of conelength (L) and residual range (R) of these particles in various Lexan sheets. Since more than one cone (sometimes as many as five) is observed and is measured, the charge accuracy becomes precise and accurate. The ratio of (calcium to manganese) to (iron and cobalt) obtained at three energy intervals of 50 to 80, 80 to 150, 150 to 250 and 50 to 250 MeV/N are 7.6 plus or minus 3.8, 2.7 plus or minus 0.8, 1.4 plus or minus 0.6 and 3.3 plus or minus 0.7 respectively. These data thus indicate a large increase of this ratio with decreasing energy. The origin of this strong energy dependence is not understood at present.

Durgaprasad, N.↗
DOE OSTI2020

Overcoming mechanical fragility in Sm-Co permanent magnet materials

Samarium-cobalt alloys are used in some of the strongest permanent magnets, particularly for applications between about 200 and 550°C, but the utilization of these materials is restricted by their brittleness. Improving their mechanical resilience would allow them to be used more widely and, in some cases, substitute for neodymium-based magnet alloys which are subject to supply-chain risks. In this work, we have engineered a series of novel microstructures with bi-modal grain size distributions to achieve unprecedented combinations of mechanical and magnetic properties. Improvements up to 73% are obtained in the flexural strength of Sm 2 (CoFeCuZr) 17 sintered magnets, with negligible impact on the magnetic properties. Our mechanically-robust, high-performance Sm-Co magnets are made without changing the chemical compositions of the materials or their heat treatment procedures, making them highly compatible with existing manufacturing processes.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Formation of Nanocrystals in an Amorphous Phase of Multicomponent Systems

The effect of the concentration of alloying components on the crystallization of amorphous (Fe{sub 73}Si{sub 13}B{sub 9}){sub 1 –} {sub x} {sub –} {sub y}Nb{sub x}Cu{sub y} and (Co{sub 70}Si{sub 12}B{sub 9}){sub 1 –} {sub x} {sub –} {sub y}Fe{sub x}Nb{sub y} alloys has been studied by X-ray diffraction and transmission electron microscopy in a wide composition region. The formation of the bcc structures in both the alloy groups is shown to be substantially dependent on the alloying component concentrations. The bcc phase is found to form in the cobalt-based alloys in the concentration region, where it was not observed before. In the cobalt-based alloys, the bcc phase appears at a niobium concentration higher than 1 at % and the average bcc nanocrystal size varies from 40 nm (at 1 at % Nb) to 14 nm (at 5 at % Nb). In the Fe-based alloys, nanocrystals with the bcc lattice form at the copper concentrations of 0.45–1 at %, and the average nanocrystal size is dependent on the alloy composition and varies in the range 16–24 nm. The causes of the concentration dependence of the formation of nanostructures in these alloys are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Integrated Circuit Design for Radiation-Hardened Charge-Sensitive Amplifier Survived up to 2 Mrad

According to the continuous development of metal-oxide semiconductor (MOS) fabrication technology, transistors have naturally become more radiation-tolerant through steadily decreasing gate-oxide thickness, increasing the tunneling probability between gate-oxide and channel. Unfortunately, despite this radiation-hardened property of developed transistors, the field of nuclear power plants (NPPs) requires even higher radiation hardness levels. Particularly, total ionizing dose (TID) of approximately 1 Mrad could be required for readout circuitry under severe accident conditions with 100 Mrad around a reactor in-core required. In harsh radiating environments such as NPPs, sensors such as micro-pocket-fission detectors (MPFD) would be a promising technology to be operated for detecting neutrons in reactor cores. For those sensors, readout circuits should be fundamentally placed close to sensing devices for minimizing signal interferences and white noise. Therefore, radiation hardening ability is necessary for the circuits under high radiation environments. This paper presents various integrated circuit designs for a radiation hardened charge-sensitive amplifier (CSA) by using SiGe 130 nm and Si 180 nm fabrication processes with different channel widths and transistor types of complementary metal-oxide-semiconductor (CMOS) and bipolar CMOS (BiCMOS). These circuits were tested under γ–ray environment with Cobalt-60 of high level activity: 490 kCi. The experiment results indicate amplitude degradation of 2.85%–34.3%, fall time increase of 201–1730 ns, as well as a signal-to-noise ratio (SNR) of 0.07–11.6 dB decrease with irradiation dose increase. These results can provide design guidelines for radiation hardening operational amplifiers in terms of transistor sizes and structures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Development of the MCNP-ORIGEN activation automation tool

This paper introduces the MCNP-ORIGEN activation automation tool for streamlining the calculation of experiment source terms. This tool couples the Monte-Carlo radiation-transport solver, MCNP to the depletion tool, ORIGEN-S. To showcase its current capabilities, this paper presents an activation analysis exercise, which is conducted with Serpent, and the results are com- pared. The experiment consists in a 90%-enriched uranium sphere surrounded by light water. A non-fissile cylinder is placed in the water, representing an irradiation experiment. We conducted simulations for 2 different cylinder materials: iron and cobalt at two different temperatures: 300 K and 900 K. The exercise consists of an irradiation of 50 days at a constant power of 5 MW, followed by a decay of 50 days. These studies highlight the discrepancies between how the different tools handle nuclear data. Finally, the results underscore multiple areas of possible improvement.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗