Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMAND SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1965

The command system

Ground commands and internal logic functions for Relay I satellite command system

COMMAND SYSTEM↗
NASA NTRS1982

Command system

The Multimission Command (MMC) System is described. The major components within the MMC System are discussed, with the emphasis on the telecommunication-related implementations. Two versions of the spacecraft command detection system (the Viking heritage command detector and the NASA standard command detector) are discussed in detail. The former prevails in the existing flight projects and the latter will likely be adopted by the missions of the near future. The preparation of design control tables for the control of command link performance between deep space stations and the spacecraft is also discussed.

Burow, N. A.↗
NASA NTRS1974

Airoscope command system

A PCM telemetry command system is presented having a capacity of 256 unique commands, an end-to-end actuation time of less than 250 milliseconds, and an address plus complementary command code to provide security against the acceptance of anything but intended commands. The system consists of a ground-based encoder and a balloon-borne decoder, both built using low-current drain, high reliability CMOS logic elements. Commands are normally issued by a simple switch closure to +5VDC on the appropriate input line, however as a backup mode, the 8-bit command may be entered manually on 8 toggle switches and executed via a SEND button. In any case, the command is then serialized into a PCM bit stream and sent via a P-Band radio link to the DECODER aloft. All 256 outputs from the DECODER are buffered through drivers and thus may be used to drive CMOS, TTL, or DTL logic.

Barrows, W.↗
NASA NTRS1981

DSN command system

Modification of the currently operational DSN Command System MK 3-80 consisted of improvement of the uplink carrier frequency tuning capability to satisfy Voyager 2 requirements. Upgrading of Command System monitoring functions in the Network Operations Control Center is discussed. The DSN Command System requirements and functional design are described for the Mark 4 Network.

Thorman, H. C.↗
NASA NTRS1994

Re-engineering the Multimission Command System at the Jet Propulsion Laboratory

The Operations Engineering Lab (OEL) at JPL has developed the multimission command system as part of JPL's Advanced Multimission Operations System. The command system provides an advanced multimission environment for secure, concurrent commanding of multiple spacecraft. The command functions include real-time command generation, command translation and radiation, status reporting, some remote control of Deep Space Network antenna functions, and command file management. The mission-independent architecture has allowed easy adaptation to new flight projects and the system currently supports all JPL planetary missions (Voyager, Galileo, Magellan, Ulysses, Mars Pathfinder, and CASSINI). This paper will discuss the design and implementation of the command software, especially trade-offs and lessons learned from practical operational use. The lessons learned have resulted in a re-engineering of the command system, especially in its user interface and new automation capabilities. The redesign has allowed streamlining of command operations with significant improvements in productivity and ease of use. In addition, the new system has provided a command capability that works equally well for real-time operations and within a spacecraft testbed. This paper will also discuss new development work including a multimission command database toolkit, a universal command translator for sequencing and real-time commands, and incorporation of telecommand capabilities for new missions.

Alexander, Scott↗
NASA NTRS1994

High angle of attack flying qualities criteria for longitudinal rate command systems

This study was designed to investigate flying qualities requirements of alternate pitch command systems for fighter aircraft at high angle of attack. Flying qualities design guidelines have already been developed for angle of attack command systems at 30, 45, and 60 degrees angle of attack, so this research fills a similar need for rate command systems. Flying qualities tasks that require post-stall maneuvering were tested during piloted simulations in the McDonnell Douglas Aerospace Manned Air Combat Simulation facility. A generic fighter aircraft model was used to test angle of attack rate and pitch rate command systems for longitudinal gross acquisition and tracking tasks at high angle of attack. A wide range of longitudinal dynamic variations were tested at 30, 45, and 60 degrees angle of attack. Pilot comments, Cooper-Harper ratings, and pilot induced oscillation ratings were taken from five pilots from NASA, USN, CAF, and McDonnell Douglas Aerospace. This data was used to form longitudinal design guidelines for rate command systems at high angle of attack. These criteria provide control law design guidance for fighter aircraft at high angle of attack, low speed flight conditions. Additional time history analyses were conducted using the longitudinal gross acquisition data to look at potential agility measures of merit and correlate agility usage to flying qualities boundaries. This paper presents an overview of this research.

Wilson, David J.↗
NASA NTRS1963

The command system malfunction of the telstar satellite

Loss of the command function of the Telstar satellite first occurred on Novemb 4, 1962. There had been earlier indications of degraded performance. Facts are presented which led to the conclusion that the malfunction of the command system was due to surface damage to certain transistors in the redundant command decoders by the enhanced radiation in the inner Van Allen belt. Correction steps have included laboratory experiments to gain a better understanding of the cause of failure, the use of continuous normal commands, commands transmitted from Johannesburg, South Africa, and specially modified commands to circumvent failure of the more vulnerable transistors. The operations which aided in the gradual rejuvenation of both command decoders are described. Also covered are the subsequent reappearance of the command system malfunction on February 21, 1963, and its correlation with the variation of the average radiation intensity seen by the satellite.

COMMAND SYSTEM↗
NASA NTRS1986

DSN command system Mark IV-85

A functional description of the Deep Space Network Command System and its subsystem is presented. The DSP command system was implemented in 1986. Store and forward command functions are reviewed. Throughput command functions for Earth orbiter missions and subsystems configurations for Mark IV-85 system are summarized.

Thorman, H. C.↗
NASA NTRS1985

Aircraft roll steering command system

Aircraft roll command signals are generated as a function of the Microwave Landing System based azimuth, groundtrack, groundspeed and azimuth rate or range distance input parameters. On initial approach, roll command signals are inhibited until a minimum roll command requirement is met. As the aircraft approaches the centerline of the runway, the system reverts to a linear track control.

Lambregts, Antonius A.↗
NASA NTRS1994

Re-Engineering the Multimission Command System at the Jet Propulsion Laboratory

This paper will discuss the design and implementation of the command software, especially trade-offs and lessons learned from practical operational use in JPL's Advanced Multimission Operations System.The command system provides an advanced multimission environment for secure, concurrent commanding of multiple spacecraft. The lessons learned have resulted in a re-engineering of the command system, especially in its user interface and new automation capabilities. This paper will also discuss new development work including a multimission command database toolkit, a universal command translator for sequencing and real-time commands, and incorporation of telecommand capabilities for new missions.

re-engineering↗
NASA NTRS1994

Test Telemetry And Command System (TTACS)

The Jet Propulsion Laboratory has developed a multimission Test Telemetry and Command System (TTACS) which provides a multimission telemetry and command data system in a spacecraft test environment. TTACS reuses, in the spacecraft test environment, components of the same data system used for flight operations; no new software is developed for the spacecraft test environment. Additionally, the TTACS is transportable to any spacecraft test site, including the launch site. The TTACS is currently operational in the Galileo spacecraft testbed; it is also being provided to support the Cassini and Mars Surveyor Program projects. Minimal personnel data system training is required in the transition from pre-launch spacecraft test to post-launch flight operations since test personnel are already familiar with the data system's operation. Additionally, data system components, e.g. data display, can be reused to support spacecraft software development; and the same data system components will again be reused during the spacecraft integration and system test phases. TTACS usage also results in early availability of spacecraft data to data system development and, as a result, early data system development feedback to spacecraft system developers. The TTACS consists of a multimission spacecraft support equipment interface and components of the multimission telemetry and command software adapted for a specific project. The TTACS interfaces to the spacecraft, e.g., Command Data System (CDS), support equipment. The TTACS telemetry interface to the CDS support equipment performs serial (RS-422)-to-ethernet conversion at rates between 1 bps and 1 mbps, telemetry data blocking and header generation, guaranteed data transmission to the telemetry data system, and graphical downlink routing summary and control. The TTACS command interface to the CDS support equipment is nominally a command file transferred in non-real-time via ethernet. The CDS support equipment is responsible for metering the commands to the CDS; additionally for Galileo, TTACS includes a real-time-interface to the CDS support equipment. The TTACS provides the basic functionality of the multimission telemetry and command data system used during flight operations. TTACS telemetry capabilities include frame synchronization, Reed-Solomon decoding, packet extraction and channelization, and data storage/query. Multimission data display capabilities are also available. TTACS command capabilities include command generation verification, and storage.

Fogel, Alvin J.↗