Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONFINEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Dynamics of Confined Flexible and Unentangled Polymer Melts in Highly Adsorbing Cylindrical Pores

Inspired by the recent neutron spin echo experiments (NSE) designed to address the dynamic phenomena in polymer melts that are induced by interactions with a confining surface, we performedcoarse-grained molecular dynamics simulations to replicate the experimental results in order to provide new molecular insight for the observations. The results show excellent agreement in the values obtained for the normalized coherent single chain dynamic structure factor, S(Q;Dt)/S(Q;0) , between experiments and simulations. The simulations indicate that using different chain molecular weights that are used to achieve scattering contrast results in the uneven distribution of scatterers in the radial direction because lower molecular weight chains prefer to adsorb in the confining surface. In the bulk configuration, both simulations and experiments confirm that the polymer chains follow Rouse dynamics. However, under confinement, the Rouse modes are suppressed. The mean-squared radius of gyration, R2g, and the average relative shape anisotropy k2 of the conformation of the polymer chains indicate a pancake-like conformation near the surface and a bulk-like conformation near the center of the confining cylinder. Direct visualization of the polymers in the simulation confirm the pancake-like conformation of the adsorbed chains and the presence of trains, loops and tails in the region between the adsorbed chains and the chains not in contact with the surface. Despite the presence of these different conformations, the average form factor of the confined chains still follows the Debye function which describes linear ideal chains, which is in agreement with small angle neutron scattering (SANS) experiments. The experimentally inaccessible mean squared displacement of the confined monomers, calculated as a function of radial distance from the pore surface, was obtained in the simulations. The simulation shows a gradual increase of the MSD from the adsorbed, but mobile layer, to that similar to the bulk far away from the surface.

Carrillo, Jan-Michael Y.↗
DOE OSTI2014

Communication: slow relaxation, spatial mobility gradients, and vitrification in confined films

Two decades of experimental research indicate that spatial confinement of glass-forming molecular and polymeric liquids results in major changes of their slow dynamics beginning at large confinement distances. A fundamental understanding remains elusive given the generic complexity of activated relaxation in supercooled liquids and the major complications of geometric confinement, interfacial effects, and spatial inhomogeneity. For this research, we construct a predictive, quantitative, force-level theory of relaxation in free-standing films for the central question of the nature of the spatial mobility gradient. The key new idea is that vapor interfaces speed up barrier hopping in two distinct, but coupled, ways by reducing near surface local caging constraints and spatially long range collective elastic distortion. Effective vitrification temperatures, dynamic length scales, and mobile layer thicknesses naturally follow. In conclusion, our results provide a unified basis for central observations of dynamic and pseudo-thermodynamic measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Dual Polarity Ion Confinement and Mobility Separations

Structures for Lossless Ion Manipulations (SLIM) have been rapidly gaining prominence for applications where ultra-high resolution Ion Mobility (IM) separations are desired to provide performance features and information unattainable using the currently available IM platforms. Although most routine analyses are done in either positive or negative polarity modes, there are significant benefits to both, potentially making them highly complementary if performed simultaneously. In the effort to develop a robust dual polarity IM platform, we explored an evaluation of a novel SLIM platform developed to perform simultaneous cationic and anionic IM separations (i.e. without requiring polarity switching).

Attah, Isaac K.↗
DOE OSTI2015

Quantum confinement in transition metal oxide quantum wells

We report on the quantum confinement in SrTiO{sub 3} (STO) quantum wells (QWs) grown by molecular beam epitaxy. The QW structure consists of LaAlO{sub 3} (LAO) and STO layers grown on LAO substrate. Structures with different QW thicknesses ranging from two to ten unit cells were grown and characterized. Optical properties (complex dielectric function) were measured by spectroscopic ellipsometry in the range of 1.0 eV–6.0 eV at room temperature. We observed that the absorption edge was blue-shifted by approximately 0.39 eV as the STO quantum well thickness was reduced to two unit cells. This demonstrates that the energy level of the first sub-band can be controlled by the QW thickness in a complex oxide material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Detailed high-resolution three-dimensional simulations of OMEGA separated reactants inertial confinement fusion experiments

Here, we present results from the comparison of high-resolution three-dimensional (3D) simulations with data from the implosions of inertial confinement fusion capsules with separated reactants performed on the OMEGA laser facility. Each capsule, referred to as a “CD Mixcap,” is filled with tritium and has a polystyrene (CH) shell with a deuterated polystyrene (CD) layer whose burial depth is varied. In these implosions, fusion reactions between deuterium and tritium ions can occur only in the presence of atomic mix between the gas fill and shell material. The simulations feature accurate models for all known experimental asymmetries and do not employ any adjustable parameters to improve agreement with experimental data. Simulations are performed with the RAGE radiation-hydrodynamics code using an Implicit Large Eddy Simulation (ILES) strategy for the hydrodynamics. We obtain good agreement with the experimental data, including the DT/TT neutron yield ratios used to diagnose mix, for all burial depths of the deuterated shell layer. Additionally, simulations demonstrate good agreement with converged simulations employing explicit models for plasma diffusion and viscosity, suggesting that the implicit sub-grid model used in ILES is sufficient to model these processes in these experiments. In our simulations, mixing is driven by short-wavelength asymmetries and longer-wavelength features are responsible for developing flows that transport mixed material towards the center of the hot spot. Mix material transported by this process is responsible for most of the mix (DT) yield even for the capsule with a CD layer adjacent to the tritium fuel. Consistent with our previous results, mix does not play a significant role in TT neutron yield degradation; instead, this is dominated by the displacement of fuel from the center of the implosion due to the development of turbulent instabilities seeded by long-wavelength asymmetries. Through these processes, the long-wavelength asymmetries degrade TT yield more than the DT yield and thus bring DT/TT neutron yield ratios into agreement with experiment. Finally, we present a detailed comparison of the flows in 2D and 3D simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Density of hydrophobically confined deeply cooled water investigated by small angle X-ray scattering

Water’s behavior near hydrophobic surfaces has attracted great attention due to chemical and geological applications. Here, we report small angle X-ray scattering (SAXS) studies of water confined in the hydrophobic nanoporous carbon material, CMK-1-14, from ambient to deeply cooled temperatures. By monitoring the scattering intensity of the first Bragg peak, which is directly related to the scattering length density contrast between the carbon matrix and the confined water, the average density of the hydrophobically confined water was determined from 300 K to 150 K at ambient pressure. Furthermore, differential scanning calorimetry and X-ray diffraction measurements showed that the majority of such hydrophobically confined water did not crystallize in the investigated temperature range. By exploiting the fast speed of SAXS measurements and the continuous temperature ramping, the average density profile and the deduced thermal expansion coefficient (α{sub p}) were obtained. We found that the well-known density maximum of water at 277 K downshifted to 260 K, and the density minimum which has been observed in hydrophilic confinement disappeared. In addition, the previously measured large density decreasing of 18% at low temperature was recalibrated to a more reasonable 10% instead. Consequently, the recalculated α{sub p} peak was found to be quite similar to that of the water confined in hydrophilic MCM-41-S-15 suggesting an intrinsic property of water, which does not sensitively depend on the confinement surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Diagnosing residual motion via the x-ray self emission from indirectly driven inertial confinement implosions

In an indirectly driven implosion, non-radial translational motion of the compressed fusion capsule is a signature of residual kinetic energy not coupled into the compressional heating of the target. A reduction in compression reduces the peak pressure and nuclear performance of the implosion. Measuring and reducing the residual motion of the implosion is therefore necessary to improve performance and isolate other effects that degrade performance. Using the gated x-ray diagnostic, the x-ray Bremsstrahlung emission from the compressed capsule is spatially and temporally resolved at x-ray energies of >8.7 keV, allowing for measurements of the residual velocity. Here details of the x-ray velocity measurement and fitting routine will be discussed and measurements will be compared to the velocities inferred from the neutron time of flight detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Design of a TW-SLIM Module for Dual Polarity Confinement, Transport, and Reactions

Here we describe instrumental approaches for performing dual polarity ion confinement, transport, ion mobility separations, and reactions in structures for lossless ion manipulations (SLIM). Previous means of ion confinement in SLIM, based upon rf-generated pseudopotentials and DC fields for lateral confinement, cannot trap ions of opposite polarity simultaneously. Here we explore alternative approaches to provide simultaneous lateral confinement of both ion polarities. Traveling wave ion mobility (IM) separations experienced in such SLIM cause ions of both polarities to migrate in the same directions and exhibit similar separations. The ion motion (and relative motion of the two polarities) under both surfing and IM separation conditions are discussed. In surfing conditions the two polarities are transported losslessly and non-reactively in their respective potential minima (higher absolute voltage regions confine negative polarities, and lower absolute potential regions are populated by positive polarities). In separation mode, where ions roll over an overtaking traveling wave, the two polarities can interact during the rollovers. Strategies to minimize overlap of the two ion populations to prevent reactive losses during separations are presented. A theoretical treatment of the time scales over which two populations (injected into a DC field-free region of the dual polarity SLIM device) interact is considered, and SLIM designs for allowing ion/ion interactions and other manipulations with dual polarities at 4 Torr are presented. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Effects of Confinement and Pressure on Vibrational Behavior of Nano-confined Propane

Fluids confined in nanopores exhibit significant deviations in their structure and dynamics from the bulk behavior. Although phase, structural and diffusive behaviors of confined fluids have been investigated and reported extensively, confinement effects on the vibrational properties are less understood. Here, we study the vibrational behavior of propane confined in 1.5 nm nanopores of MCM-41-S using inelastic neutron scattering (INS) and molecular dynamics (MD) simulations. Vibrational spectra have been obtained from INS data as functions of temperature and pressure. At ambient pressure, a strong quasielastic signal observed in the INS spectrum at 80 K suggests that confined propane remains liquid below the bulk phase melting point of 85 K. The quasielastic signal is heavily suppressed when either the pressure is increased to 1 kbar, or the temperature is lowered to 30 K, indicating solidification of pore-confined propane. Confinement in MCM-41-S pores results in a glass-like state of propane that exhibits a relatively featureless low-energy vibrational spectrum compared to the bulk crystalline propane. Increasing the pressure to 3 kbar results in hardening of the intermolecular and methyl torsional modes. The INS data are used for estimating the isochoric specific heat of confined propane, which is compared with the specific heat of bulk propane reported in literature. Data from MD simulations is used to calculate the vibrational power spectra that agree qualitatively with the experimental data. Simulation data also suggests a reduction in the structural ordering (positional, orientational and intramolecular) of propane under confinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Experimental study of high-k turbulence during an energy confinement degradation phase in EAST ohmic plasmas

In this paper, we present experimental studies of both high-k(r) ( cm(-1), and , respectively; ) and high- ( cm(-1), and , respectively; ) turbulence behavior during an ohmic energy confinement degradation phase in experimental advanced superconducting tokamak (EAST). High-k(r) turbulence from density fluctuation at and high- turbulence from density fluctuation at -0.97 were measured by tangential and poloidal CO2 laser collective scattering diagnostics, respectively. Note that k(r), , and are radial wavenumber, poloidal wavenumber, perpendicular wavenumber and ion gyroradius at electron temperature, respectively. Both high-k(r)/ turbulence power and energy confinement time are found to be temporally correlated to line-averaged electron density n(e) in the plasma current flat-top phase (I-p = 0.4 MA): when the n(e) shows continuous increase/decrease, the high-k(r)/ turbulence power increases/decreases correspondingly and the shows corresponding decrease/increase; the stable n(e) is related to stable both and high-k(r)/ turbulence power. Statistical results of high-k(r)/ turbulence power versus further imply that high-k(r)/ turbulence shows a strong correlation with plasma energy confinement degradation in high line-averaged n(e) condition, but high-k(r) and high- turbulence have relatively weak and no dependence on the transition between linear range in low-n(e) condition and energy confinement degradation in the high-n(e) condition, respectively. Moreover, profiles of electron temperature T-e and n(e) as well as their normalized gradients in a part of high- density fluctuation measurement region also have been given to qualitatively explain the enhancement of turbulence power with the increase of line-averaged n(e).

EAST tokamak↗
DOE OSTI2023

Confinement time and ambipolar potential in a relativistic mirror-confined plasma

Advanced aneutronic fusion fuels such as proton-Boron 11 tend to require much higher temperatures than conventional fuels like deuterium–tritium. For electrons, the bulk plasma temperature can approach a substantial fraction of the rest mass. In a mirror confinement system, where the electrons are confined by an ambipolar potential of at least five electron temperatures, the tail electrons which can escape the potential are fully relativistic, which must be taken into account in calculating their confinement. In this paper, simple estimates are employed to extend the scaling of the confinement time into the relativistic regime. By asymptotically matching this scaling to known solutions in the non-relativistic limit, accurate forms for the confinement time (and thus, the ambipolar potential) are obtained. Furthermore, these forms are verified using finite-element-based Fokker–Planck simulations over a wide range of parameters. Comparing relativistic and nonrelativistic mirror-confined plasmas with the same ratio of confining potential |eΦ| to electron temperature T e and the same mirror ratio R, the net result is a decrease in the confinement time due to relativistic effects by a factor of S ≡ (1 + 15T e /8m e c 2 )/(1 + 2|eΦ|/m e c 2 )⁠.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Can We Describe Graphene Confined Water Structures as Overlapping of Approaching Graphene–Water Interfacial Structures?

We investigate the microscopic mechanisms of the overlap of interfacial structures in confined fluids and attempt to answer the question whether the confined structures can be predicted from the original density profiles of individual solid–fluid interfaces. For that purpose, we perform (globally) isobaric–isothermal (locally, grand canonical) molecular dynamics simulations to extract not only the axial distribution functions of the water sites for the uncoupled graphene–water interfaces, but also those corresponding to the confined aqueous environments over the interplate range $8 ≤ h (Å) ≤ 28$ typically at ambient conditions. We have tested two (i.e., an arithmetic and a geometric) superposition approximations for the singlet density of confined water between flat graphene plates, as well as for a combination of flat and corrugated graphene plates. The outcome of this study suggests that the answer to the title’s question is a “yes”, provided that the interplate distance h is large enough to avoid fluid geometric packing frustration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Nonlinear gyrokinetic simulations of the I-mode high confinement regime and comparisons with experiment

For the first time, nonlinear gyrokinetic simulations of I-mode plasmas are performed and compared with experiment. I-mode is a high confinement regime, featuring energy confinement similar to H-mode, but without enhanced particle and impurity particle confinement [D. G. Whyte et al., Nucl. Fusion 50, 105005 (2010)]. As a consequence of the separation between heat and particle transport, I-mode exhibits several favorable characteristics compared to H-mode. The nonlinear gyrokinetic code GYRO [J. Candy and R. E. Waltz, J Comput. Phys. 186, 545 (2003)] is used to explore the effects of E × B shear and profile stiffness in I-mode and compare with L-mode. The nonlinear GYRO simulations show that I-mode core ion temperature and electron temperature profiles are more stiff than L-mode core plasmas. Scans of the input E × B shear in GYRO simulations show that E × B shearing of turbulence is a stronger effect in the core of I-mode than L-mode. The nonlinear simulations match the observed reductions in long wavelength density fluctuation levels across the L-I transition but underestimate the reduction of long wavelength electron temperature fluctuation levels. The comparisons between experiment and gyrokinetic simulations for I-mode suggest that increased E × B shearing of turbulence combined with increased profile stiffness are responsible for the reductions in core turbulence observed in the experiment, and that I-mode resembles H-mode plasmas more than L-mode plasmas with regards to marginal stability and temperature profile stiffness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗