Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONICAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1949

Two-dimensional compressible flow in turbomachines with conic flow surfaces

A general method of analysis is developed for two-dimensional, steady, compressible flow in stators or rotors of radial and mixed flow turbomachines with conic flow surfaces (surfaces of right circular cones generated by center line of flow passage in the axial-radial plane). The variables taken into account are: (1) tip speed of the rotor, (2) flow rate, (3) blade shape, (4) variation in passage height with radius, (5) number of blades, and (6) cone angle of the flow surface. Relaxation methods are used to solve the nonlinear differential equation for the stream function. Two numerical examples are presented; one for compressible and the other for incompressible flow in a centrifugal compressor with thin, straight blades. The results of these examples are given by plots of the streamlines, constant velocity-ratio lines, and constant pressure-ratio line.

Stanitz, John D↗
NASA NTRS1975

On the analytic structure of the Taylor-Maccoll conical-flow solution

The conical flow solution for axisymmetric supersonic flow past cones has been found to be virtually independent of the ratio of specific heats when normalized in a certain way. A simple rational approximation to this flow is derived. The important singularities and the limiting behavior of the solution are also discussed.

Schwartz, L. W.↗
NASA NTRS1955

General theory of conical flows and its application to supersonic aerodynamics

Points treated in this report are: homogeneous flows, the general study of conical flows with infinitesimal cone angles, the numerical or analogous methods for the study of flows flattened in one direction, and a certain number of results. A thorough consideration of the applications on conical flows and demonstration of how one may solve within the scope of linear theory, by combinations of conical flows, the general problems of the supersonic wing, taking into account dihedral and sweepback, and also fuselage and control surface effects.

THEORIES - FLOW - LINEAR↗
NASA NTRS1983

Topology of vortices in conical flow

The possibility of the existence of a viscous vortex in a conical flow is discussed. Existence of a viscous vortex is shown to be consistent with a flow-field model where only the velocity components and the total enthalpy behave conically. Existence of a viscous vortex is not consistent with the fully conical, flow-field model; however, far from the nose tip, the physical flow quantities tend to behave asymptotically as a full conical flow. Such a viscous vortex, when it exists, must spiral inwards to the focal point. It can be used as a reasonable model to start numerical solutions of various kinds.

Almosnino, D.↗
NASA NTRS1974

Transonic conical flow

The problem of inviscid, steady transonic conical flow, formulated in terms of the small disturbance theory, is studied. The small disturbance equation and similarity rules are presented, and a boundary value problem is formulated for the case of a supersonic freestream Mach number. The equation for the perturbation potential is solved numerically using an elliptic finite difference system. The difference equations are solved with a point relaxation algorithm that is also capable of capturing the shock wave during the iteration procedure by using the boundary conditions at the shock. Numerical calculations, for shock location, pressure distribution and drag coefficient, are presented for a family of nonlifting conical wings. The theory of slender wings is also presented and analytical results for pressure and drag coefficients are obtained.

Agopian, K. G.↗
NASA NTRS1984

The computation of rotational conical flows

A method based on the Clebsch velocity decomposition is presented to solve the steady, inviscid, supersonic flow field about arbitrary conical geometries. The system of equations developed, although formally equivalent to the Euler equations, retains the computational efficiency of type-dependent potential flow solutions. Accurate rotational-flow solutions are developed using shock-fitting procedures at the bow and imbedded waves along with special treatment of the vortical layer. Solutions are presented for several high Mach number conical flows and compared with existing Euler solutions and experimental data.

Grossman, B.↗
NASA NTRS1982

Performance of a tandem-rotor/tandem-stator conical-flow compressor designed for a pressure ratio of 3

A conical-flow compressor stage with a large radius change through the rotor was tested at three values of rotor tip clearance. The stage had a tandem rotor and a tandem stator. Peak efficiency at design speed was 0.774 at a pressure ratio of 2.613. The rotor was tested without the stator, and detailed survey data were obtained for each rotor blade row. Overall peak rotor efficiency was 0.871 at a pressure ratio of 2.952.

Wood, J. R.↗
NASA NTRS1985

Adaptive mesh solution for supersonic conical flow in a rectilinear inlet

Solutions for the inviscid and viscous supersonic conical flow in a complete rectilinear inlet consisting of four planes intersecting at arbitrary wedge and sweep angles are obtained. To compute the flow on a specially constructed mesh, a three-dimensional flow solver ARC3D is used. It is shown that a single-pass mesh re-adaptation procedure can be used to obtain improved shock capture without the necessity of modifying the flow code, provided that the flow solver works in curvilinear coordinates and is restartable. Results computed by the method show good agreement with experimental measurements and previous calculations.

Kerlick, G. D.↗
NASA NTRS1982

Finite area method for nonlinear conical flows

A fully conservative finite area method for the computation of steady inviscid flow about general conical bodies at incidence is described. The procedure utilizes the potential approximation and implements a body conforming mesh generator. The conical potential is assumed to have its best linear variation inside each mesh cell and a secondary interlocking cell system is used to establish the flux balance required to conserve mass. In the supersonic regions the scheme is desymmetrized by adding appropriate artificial viscosity in conservation form. The algorithm is nearly an order of a magnitude faster than present Euler methods and predicts known results accurately and qualitative features such as nodal point lift off correctly. Results are compared with those of other investigations.

Sritharan, S. S.↗
NASA NTRS1983

Finite area method for nonlinear supersonic conical flows

A fully conservative numerical method for the computation of steady inviscid supersonic flow about general conical bodies at incidence is described. The procedure utilizes the potential approximation and implements a body conforming mesh generator. The conical potential is assumed to have its best linear variation inside each mesh cell; a secondary interlocking cell system is used to establish the flux balance required to conserve mass. In the supersonic regions the scheme is symmetrized by adding artificial viscosity in conservation form. The algorithm is nearly an order of a magnitude faster than present Euler methods and predicts known results accurately and qualitative features such as nodal point lift off correctly. Results are compared with those of other investigators.

Sritharan, S. S.↗
NASA NTRS1952

On rotational conical flow

Some general properties of isoenergetic rotational conical fields are determined. For such fields, provided the physical parameters of the fluid flow are known on a conical reference surface, it being understood that they satisfy certain imposed conditions, it is shown how to construct the hodographs in the various meridional semiplanes, as the envelope of either the tangents to the hodographs or of the osculatory circles.

BODIES - AERODYNAMIC THEORY↗
NASA NTRS1993

Active control of asymmetric conical flow using spinning and rotatory oscillations

The effectiveness of active control on asymmetric flows around circular cones is investigated computationally using cone spinning and rotatory oscillation around its axis. The investigation uses the time-accurate solution of the unsteady, compressible, full Navier-Stokes equations with the implicit, upwind, flux-difference splitting, finite-volume scheme. The present solutions are obtained under the locally-conical-flow assumption in order to understand the flow physics using very fine grids for reasonable flow resolution at low computational cost. For all the computational solutions, a grid of 241 x 81 x 2 points in the wrap-around, normal and axial directions, respectively, is used. The grid is spinning or oscillating rigidly with the cone according to its motion and the kinematical and dynamical boundary conditions are modified accordingly. The computational applications include the effects of uniform spinning rates and periodic rotatory oscillations at different amplitudes and frequencies on the flow asymmetry.

Kandil, Osama A.↗
NASA NTRS1961

Experimental Determination of the Recovery Factor and Analytical Solution of the Conical Flow Field for a 20 deg Included Angle Cone at Mach Numbers of 4.6 and 6.0 and Stagnation Temperatures to 2600 degree R

The local recovery factor was determined experimentally along the surface of a thin-walled 20 deg included angle cone for Mach numbers near 6.0 at stagnation temperatures between 1200 deg R and 2600 deg R. In addition, a similar cone configuration was tested at Mach numbers near 4.5 at stagnation temperatures of approximately 612 deg R. The local Reynolds number based on flow properties at the edge of the boundary layer ranged between 0.1 x 10(exp 4) and 3.5 x 10(exp 4) for tests at temperatures above 1200 deg R and between 6 x 10(exp 4) and 25 x 10(exp 4) for tests at temperatures near 612 deg R. The results indicated, generally, that the recovery factor can be predicted satisfactorily using the square root of the Prandtl number. No conclusion could be made as to the necessity of evaluating the Prandtl number at a reference temperature given by an empirical equation, as opposed to evaluating the Prandtl number at the wall temperature or static temperature of the gas at the cone surface. For the tests at temperatures above 1200 deg R (indicated herein as the tests conducted in the slip-flow region), two definite trends in the recovery data were observed - one of increasing recovery factor with decreasing stagnation pressure, which was associated with slip-flow effects and one of decreasing recovery factor with increasing temperature. The true cause of the latter trend could not be ascertained, but it was shown that this trend was not appreciably altered by the sources of error of the magnitude considered herein. The real-gas equations of state were used to determine accurately the local stream properties at the outer edge of the boundary layer of the cone. Included in the report, therefore, is a general solution for the conical flow of a real gas using the Beattie-Bridgeman equation of state. The largest effect of temperature was seen to be in the terms which were dependent upon the internal energy of the gas. The pressure and hence the pressure drag terms were unaffected.

Pfyl, Frank A.↗
NASA NTRS1989

Vortex-dominated conical-flow computations using unstructured adaptively-refined meshes

A conical Euler/Navier-Stokes algorithm is presented for the computation of vortex-dominated flows. The flow solver involves a multistage Runge-Kutta time stepping scheme which uses a finite-volume spatial discretization on an unstructured grid made up of triangles. The algorithm also employs an adaptive mesh refinement procedure which enriches the mesh locally to more accurately resolve the vortical flow features. Results are presented for several highly-swept delta wing and circular cone cases at high angles of attack and at supersonic freestream flow conditions. Accurate solutions were obtained more efficiently when adaptive mesh refinement was used in contrast with refining the grid globally. The paper presents descriptions of the conical Euler/Navier-Stokes flow solver and adaptive mesh refinement procedures along with results which demonstrate the capability.

Batina, John T.↗