Search NASA⌕ Search

SEARCH · Search NASA

Results for “COPPER 53”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 53

The 1999 evaluation of A = 53 (1999Hu14) has been revised using experimental nuclear structure data available before April 2007. A summary of information obtained in various reaction and decay experiments is presented, together with adopted level schemes and properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation on Explosive Welding of Zr{sub 53}Cu{sub 35}Al{sub 12} Bulk Metallic Glass with Crystalline Copper

A Zr{sub 53}Cu{sub 35}Al{sub 12} bulk metallic glass (BMG) was welded to a crystalline Cu using explosive welding technique. The morphology and the composition of the composite were characterized using optical microscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy and transmission electron microscopy. The investigation indicated that the BMG and Cu were tightly joined together without visible defects, and a thin diffusion layer appeared at the interface. The captured jet at the end of the welding region mostly comes from the Cu side. Amorphous and partially crystallized structures have been observed within the diffusion layer, but the BMG in close proximity to the interface still retains its amorphous state. Nanoindentation tests reveal that the interface exhibits an increment in hardness compared with the matrix on both sides.

36 MATERIALS SCIENCE↗

An instrument for 3D x-ray nano-imaging

We present an instrument dedicated to 3D scanning x-ray microscopy, allowing a sample to be precisely scanned through a beam while the angle of x-ray incidence can be changed. The position of the sample is controlled with respect to the beam-defining optics by laser interferometry. The instrument achieves a position stability better than 10 nm standard deviation. The instrument performance is assessed using scanning x-ray diffraction microscopy and we demonstrate a resolution of 18 nm in 2D imaging of a lithographic test pattern while the beam was defined by a pinhole of 3 {mu}m in diameter. In 3D on a test object of copper interconnects of a microprocessor, a resolution of 53 nm is achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Quantitative analysis of oxygen content in copper oxide films using ultra microbalance

Copper oxide films were prepared on quartz substrates through electron beam physical vapor deposition in a vacuum chamber, and the films were observed using X-ray diffraction (XRD) and scanning electron microscope (SEM). The oxygen content of the films were analyzed using an ultra microbalance. Results indicated that when the substrate was heated to 600°C and the oxygen flow rate was 5 sccm, the film was composed of 47% Cu and 53% Cu2O (mass percent), and the oxidation ratio of copper was 25%. After the deposition process at the same condition, i.e. the substrate at temperature of 600°C and blowed by oxygen flowrate of 5 sccm, then in-stu annealed at 600°C in low oxygen pressure of 10 Pa for 30 minutes, the film composition became 22% Cu2O and 78% CuO (mass percent), and the oxidation ratio of copper greatly increased to about 88%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transforming E-Waste Into Strategic Resources: Techno-Economic Analysis of Gallium and By-products Recovery from LEDs via Bioleaching

The growing demand for gallium in optoelectronics and renewable energy applications raises concerns about supply security and production sustainability. This study evaluates the techno-economic feasibility of recovering gallium and by-products (copper and nickel) from waste GaN-based LEDs via bioleaching. A process flowsheet encompassing transportation, robotic disassembly, ball milling, bioleaching, solvent extraction/electrowinning, and refining was modeled. Based on mass balance analysis, more than 53 tons of LED waste are required annually to yield 1 kg of gallium alongside substantial copper and nickel co-products. Preliminary techno-economic analysis (TEA) shows an average total cost (ATC) of 6.84 USD/kg metal when costs are allocated by mass-weighted economic value (market price) fraction, corresponding to 6.75 USD/kg for copper, 15.91 USD/kg for nickel, and 470.95 USD/kg for gallium. For gallium, direct operational costs account for more than 70% of the cost. Monte Carlo simulations further quantify cost uncertainties under market price fluctuations. This work represents the first TEA of gallium recovery from GaN-based LEDs and highlights potential pathways for future cost reduction.

36 MATERIALS SCIENCE↗

Mass measurements in the vicinity of the doubly magic waiting point {sup 56}Ni

Masses of {sup 56,57}Fe, {sup 53}Co{sup m}, {sup 53,56}Co, {sup 55,56,57}Ni, {sup 57,58}Cu, and {sup 59,60}Zn have been determined with the JYFLTRAP Penning trap mass spectrometer at the Ion-Guide Isotope Separator On-Line facility with a precision of {delta}m/m{<=}3x10{sup -8}. The Q{sub EC} values for {sup 53}Co, {sup 55}Ni, {sup 56}Ni, {sup 57}Cu, {sup 58}Cu, and {sup 59}Zn have been measured directly with a typical precision of better than 0.7 keV and Coulomb displacement energies have been determined. The Q values for proton captures on {sup 55}Co, {sup 56}Ni, {sup 58}Cu, and {sup 59}Cu have been measured directly. The precision of the proton-capture Q value for {sup 56}Ni(p,{gamma}){sup 57}Cu, Q{sub (p,{gamma})}=689.69(51) keV, crucial for astrophysical rp-process calculations, has been improved by a factor of 37. The excitation energy of the proton-emitting spin-gap isomer {sup 53}Co{sup m} has been measured precisely, E{sub x}=3 174.3(10) keV, and a Coulomb energy difference of 133.9(10) keV for the 19/2{sup -} state has been obtained. Except for {sup 53}Co, the mass values have been adjusted within a network of 17 frequency ratio measurements between 13 nuclides, which allowed also a determination of the reference masses {sup 55}Co, {sup 58}Ni, and {sup 59}Cu.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron production in collisions between carbon nuclei of energy 2 GeV per nucleon and carbon, aluminum, copper, cadmium, and lead nuclei

Double-differential cross sections for neutron production were measured by the time-of-flight method for the interactions between carbon nuclei of energy 2 GeV per nucleon and carbon, aluminum, copper, cadmium, and lead nuclei. These measurements were performed for angles of 30 Degree-Sign , 53 Degree-Sign , and 90 Degree-Sign in the neutron-energy range fromseveral hundred keVunits to 300MeV. The phenomenologicalmodel of four moving sources was used as a basis in analyzing experimental results and in estimating the contribution to neutron emission from various reaction stages. The temperature parameters determined from the slope of the neutron energy spectra proved to be 22 {+-} 2 MeV for a hot source (fireball) and 4.5 {+-} 0.3 MeV for the stage of thermal fragmentation of highly excited heavy nuclear residues. The relative contribution of these two sources to the total neutron yield is independent of the type of the target nucleus and is about 42%, on average.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Genome Sequence of the Arctic Methanotroph Methylobacter tundripaludum SV96

Methylobacter tundripaludum SV96(T) (ATCC BAA-1195) is a psychrotolerant aerobic methane-oxidizing gammaproteobacterium (Methylococcales, Methylococcaceae) living in High Arctic wetland soil. The strain was isolated from soil harvested in July 1996 close to the settlement Ny-Alesund, Svalbard, Norway (78 degrees 56'N, 11 degrees 53'E), and described as a novel species in 2006. The genome includes pmo and pxm operons encoding copper membrane monooxygenases (Cu-MMOs), genes required for nitrogen fixation, and the nirS gene implicated in dissimilatory nitrite reduction to NO but no identifiable inventory for further processing of nitrogen oxides. These genome data provide the basis to investigate M. tundripaludum SV96, identified as a major player in the biogeochemistry of Arctic environments.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, electrical and dielectric characterization of cerium doped nano copper ferrites

Graphical abstract: Lattice constant (a) and activation energy (Ea) as a function of Ce (cerium) content. - Highlights: • The simple and economic method has been adopted for the synthesis of nanoferrites. • The electrical resistivity increases with cerium concentration. • DC electrical resistivity of these materials favours their use in microwave devices. • Dielectric measurements show semiconductor nature of the synthesized ferrites. - Abstract: The nanosized CuFe{sub 2−x}Ce{sub x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8) ferrites doped with cerium are synthesized by chemical co-precipitation method. The synthesized materials are characterized by XRD, FTIR, TGA and SEM. XRD analysis of cerium substituted copper ferrites confirms the cubic spinel structure. The average crystallite size calculated by using Scherrer's formula ranges from 37 to 53 nm. The values of cell constant and cell volume vary with the dopant concentration. These variations can be explained in terms of their ionic radii. The DC electrical resistivity, measured by two point probe method, increases with increase in dopant concentration while it decreases with rise in temperature exhibiting semiconductor behaviour. Energy of activation of these ferrites is calculated by using Arrhenius type resistivity plots. Dielectric measurements of the synthesized compounds show exponential decrease in dielectric constant and dielectric loss factor with increase in frequency. This indicates the normal dielectric behaviour of ferrites.

36 MATERIALS SCIENCE↗

Beyond the usual suspects: methanogenic communities in eastern North American peatlands are also influenced by nickel and copper concentrations

Peatlands both accumulate carbon and release methane, but their broad range in environmental conditions means that the diversity of microorganisms responsible for carbon cycling is still uncertain. Here, we describe a community analysis of methanogenic archaea responsible for methane production in 17 peatlands from 36 to 53 N latitude across the eastern half of North America, including three metal-contaminated sites. Methanogenic community structure was analysed through Illumina amplicon sequencing of the mcrA gene. Whether metal-contaminated sites were included or not, metal concentrations in peat were a primary driver of methanogenic community composition, particularly nickel, a trace element required in the F 430 cofactor in methyl-coenzyme M reductase that is also toxic at high concentrations. Copper was also a strong predictor, likely due to inhibition at toxic levels and/or to cooccurrence with nickel, since copper enzymes are not known to be present in anaerobic archaea. Here, the methanogenic groups Methanocellales and Methanosarcinales were prevalent in peatlands with low nickel concentrations, while Methanomicrobiales and Methanomassiliicoccales were abundant in peatlands with higher nickel concentrations. Results suggest that peat-associated trace metals are predictors of methanogenic communities in peatlands.

54 ENVIRONMENTAL SCIENCES↗

Substituted copper phthalocyanine/multiwalled carbon nanotubes hybrid material for Cl{sub 2} sensing application

In this work, hybrid of soluble copper phthalocyanine (CuPcOC{sub 8}) and functionalized multi-walled carbon nanotubes (MWCNTs) has been synthesized. The formation of CuPcOC{sub 8}-MWCNTs hybrid is confirmed by atomic force microscopy, UV-Visible and FTIR spectroscopy. Subsequently, a chemi-resistive sensor is fabricated by drop casting CuPcOC{sub 8}-MWCNTs hybrid onto glass substrate. It has been demonstrated that CuPcOC{sub 8}-MWCNTs hybrid is highly selective towards Cl{sub 2} gas with minimum detection limit of 100 ppb. The response of sensor increases linearly with increase in the concentration of Cl{sub 2} gas. For 2000 ppb of Cl{sub 2}, CuPcOC{sub 8}-MWCNTs hybrid gives a response as large as 53% in 40 seconds.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design Methodology and Consideratios for NOVA 53 MHZ RF Cavities

The NO?A Experiment will construct a detector optimized for electron neutrino detection in the existing Neutrino at Main Injector (NuMI) beamline. This beamline is capable of operating at 400 kW of primary beam power and the upgrade will allow up to 700 kW. The cavities will operate at 53 MHz and three of them will be installed in the Recycler beamline. Thermal stability of the cavities is crucial since this affects the tuning. Results of finite element thermal and structural analysis involving the copper RF cavity will be presented.

43 PARTICLE ACCELERATORS↗

Microstructural and optical studies on sonochemically synthesized Cu doped ZnO nanoparticles

Copper doped ZnO nanoparticles were synthesized by sonochemical method varying the concentration of the impurity. Systematic investigations like X-ray diffraction (XRD) and Transmission electron microscopy (TEM) were carried out to understand the microstructural properties. The average particle sizes and all the crystallographic parameters were calculated from XRD results. This shows the formation of wurtzite phase of ZnO with average size of the particles as 53 nm and an increase of particle size with dopant concentration was also been observed. UV absorption and Fourier transformed infrared spectroscopy (FTIR) spectra revealed the absorption at wavelength < 370 nm with a remarkable red shift of absorption band and a linear decrease of transmittance with increase in doping concentrations respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Simulations of CuCl in High-Temperature Water Vapor

Experimental data suggest that the solubility of copper in high-temperature water vapor is controlled by the formation of hydrated clusters of the form CuCl(H 2 O) n , where the average number of water molecules in the cluster generally increases with increasing density [Migdisov, A. A.; et al. Geochim. Cosmochim. Acta2014, 129, 33–53]. However, the precise nature of these clusters is difficult to probe experimentally. Moreover, there are some discrepancies between experimental estimates of average cluster size and prior simulation work [Mei, Y. Geofluids2018, 2018, 4279124]. Here, we have performed first-principles Monte Carlo (MC) and molecular dynamics (MD) simulations to explore these clusters in finer detail. We find that molecular dynamics is not the most appropriate technique for studying aggregation in vapor phases, even at relatively high temperatures. Specifically, our MD simulations exhibit substantial problems in adequately sampling the equilibrium cluster size distribution. In contrast, MC simulations with specialized cluster moves are able to accurately sample the phase space of hydrogen-bonding vapors. At all densities, we find a stable, slightly distorted linear H 2 O–Cu–Cl structure, which is in agreement with the earlier simulations, surrounded by a variable number of water molecules. The surrounding water molecules do not form a well-defined second solvation shell but rather a loose network of hydrogen-bonded water with molecular CuCl on the outside edge of the water cluster. We also find a broad distribution of hydration numbers, especially at higher densities. In contrast to previous simulation work but in agreement with experimental data, we find that the average hydration number substantially increases with increasing density. Moreover, the value of the hydration number depends on the choice of cluster definition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optoelectronic Properties of Strontium and Barium Copper Sulfides Prepared by Combinatorial Sputtering

Optically transparent materials with p-type electrical conductivity can facilitate the development of transparent electronics and improve the efficiency of photovoltaic solar cells. Sulfide materials represent an interesting alternative to oxides for these applications due to better hole transport properties. We prepare transparent and conductive Ba-Cu-S thin films by combinatorial cosputtering and characterized for their composition, structure, and optoelectronic properties. The conductivity and transparency of these films are found to be strongly dependent on their chemical composition and the substrate temperature during growth. The conductivity of BaCu 2 S 2 and BaCu 4 S 3 can reach 53 S/cm (at 250 °C) and 74 S/cm (at 200 degrees C), respectively, which is higher than their solution processed/bulk counterparts. The 90% reflectance corrected transmittance is achieved in the wavelength range 600-1000 nm for BaCu 2 S 2 and 650-1000 nm for BaCu 4 S 3 (at 250 °C). These electrical and optical properties are comparable with other recently presented transparent p-type conductors, while the 200-350 degrees C processing temperature is low enough to be used in semiconductor devices with limited thermal budgets. Some attempts have been made to synthesize the related Sr-Cu-S materials, following the theoretical suggestion of their potential as transparent p-type conductors, but these attempts resulted only in phase-separated SrS and CuxS phases. Alloying BaCu 2 S 2 with Sr on the Ba site on the other hand increases the conductivity to >100 S/cm while only slightly compromising the transparency of the material. To explain the difference between the Ba and the Sr containing copper sulfides, the lower bounds on the SrCu 2 S 2 and SrCu 4 S 3 formation enthalpies are estimated. While the doping of the Ba-Cu-S materials presented here is too large for application in transparent electronics, it is promising for potential use as p-type contact layers in thin film solar cells.

14 SOLAR ENERGY↗

Magnetocaloric properties of rapidly solidified Dy{sub 3}Co alloy ribbons

The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy{sub 3}Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms{sup −1}. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe{sub 3}C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at T{sub N} = 43 K. Furthermore, a metamagnetic transition is observed below T{sub N}, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔS{sub M}{sup peak} of −6.5 (− 2.1) Jkg{sup −1}K{sup −1} occurring close to T{sub N} with a full-width at half-maximum δT{sub FWHM} of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg{sup −1} (estimated from the product |ΔS{sub M}{sup peak}| × δT{sub FWHM})

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

London penetration depth of electron-irradiated Ba 0 . 47 K 0 . 53 Fe 2 As 2

We have characterized an electron-irradiated Ba 1-x K x Fe 2 As 2 (x = 0.53) single-crystal using two different experimental techniques: magneto-optic measurements and microwave measurements. The crystal has been measured before as well as after the 2.5 MeV electron irradiation process. After irradiation it was annealed in a number of steps, between 90 °C and 180 °C, and measured after each annealing step. Most microwave measurements were performed by means of a copper cavity, taking advantage of the TE 011 and TM 110 modes, allowing for the determination of the London penetration depths changes δλ ab (T) and δλ c (T), ie perpendicular and parallel to the sample c-axis. Appropriate equations, based on perturbation theory, were derived to calculate the penetration depths changes δλ ab and δλ c for a rectangular prism geometry. The sample showed a full recovery of its T c , however the observed behavior of δλ c and δλ ab was not monotonic vs annealing temperature, displaying a minimum of δλ c and δλ ab at 120 °C. In conclusion, this finding was confirmed by magneto-optic measurements, where besides verifying the sample uniformity and the absence of visible defects, the lower critical field H c1 of the Ba 1-x K x Fe 2 As 2 single-crystal was obtained and the London penetration depth λab(0) was calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and analytical study of the hydrodynamic and single and two-phase convective heat transfer performance of flexible PDMS microchannels with micropillar arrays

Various copper and silicon based thermal management systems are used in the cooling of electronics. However, the rigid nature of these materials along with their high thermal and electrical conductivity pose a difficulty in developing direct contact embedded flexible cooling systems that can offer robust cooling performance. The low density, thermal stability, chemical inertness, and electrical insulation of Polydimethylsiloxane (PDMS) make it an ideal material to develop lightweight direct contact thermal management systems for electronics. Its ease of fabrication with tunable flexibility provides the opportunity to go beyond traditional electronics and develop advanced active and passive thermal management systems for a wide–range of applications in foldable and wearable electronics, liquid cooling garments, microgravity, and electric motors. In this study, a flexible PDMS based microchannel with micropillar arrays, which enhance the thermal performance of the device through capillary-assisted flow, has been developed. The hydrodynamic and convection heat transfer performance of three PDMS wick pillar geometries, ranging from a porosity of 0.8–0.91, are investigated and compared under single-phase and two-phase conditions. Dielectric coolant FC-3283 is employed and permeability measurements are made for mass fluxes ranging from 53 kg/m 2 s to 369 kg/m 2 s. Given its conformability, the device demonstrates a deviation from Darcy’s Law, within the laminar regime, with an increasing permeability with mass flux at the rate of ~0.5–0.8 Darcy/(kg/m 2 s). A semi-analytical model has been developed and reported to quantify the conformability of the device. The heat transfer performance is experimentally evaluated using the same dielectric fluid for mass flux ranging from 105 kg/m 2 s to 420 kg/m 2 s with heat fluxes ranging from 1.5 W/cm 2 to 16 W/cm 2 . Heat transfer coefficients of up to 7000 W/m 2 K are observed, which are comparable to copper and silicon microchannels. The effect of porosity on the single phase thermal performance has been evaluated against the pumping power to provide a basis for thermal management system design. Finally, high-speed imaging is performed to study the two-phase flow characteristics to provide insight into the vapor formation and removal.

42 ENGINEERING↗