Search NASA⌕ Search

SEARCH · Search NASA

Results for “COPPER 67”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Cu-67 Photonuclear Production

Cu-67 is considered as one of the most promising radioisotopes for cancer therapy with monoclonal antibodies. Current production schemes using high-flux reactors and cyclotrons do not meet potential market need. In this paper we discuss Cu-67 photonuclear production through the reaction Zn-68({gamma},p)Cu-67. Computer simulations were done together with experiments to study and optimize Cu-67 yield in natural Zn target. The data confirms that the photonuclear method has potential to produce large quantities of the isotope with sufficient purity to be used in medical field.

07 ISOTOPE AND RADIATION SOURCES↗

Optimization of commercial scale photonuclear production of radioisotopes

Photonuclear production of radioisotopes driven by bremsstrahlung photons using a linear electron accelerator in the suitable energy range is a promising method for producing radioisotopes. The photonuclear production method is capable of making radioisotopes more conveniently, cheaply and with much less radioactive waste compared to existing methods. Historically, photo-nuclear reactions have not been exploited for isotope production because of the low specific activity that is generally associated with this production process, although the technique is well-known to be capable of producing large quantities of certain radioisotopes. We describe an optimization technique for a set of parameters to maximize specific activity of the final product. This set includes the electron beam energy and current, the end station design (an integrated converter and target as well as cooling system), the purity of materials used, and the activation time. These parameters are mutually dependent and thus their optimization is not trivial. {sup 67}Cu photonuclear production via {sup 68}Zn({gamma}p){sup 67}Cu reaction was used as an example of such an optimization process.

07 ISOTOPE AND RADIATION SOURCES↗

A New Method for Production of the Sr-82 Generator Radionuclide and Other Medical Radionuclides

A cyclotron (C-80) designed to produce protons with an energy of 40–80 MeV and beam intensity of 100–200 μA has been launched at the Petersburg Nuclear Physics Institute, National Research Center Kurchatov Institute. The main task of C-80 is the production of a wide range of medical radionuclides for diagnosis and therapy. A complex named Radioactive Isotopes on the C-80 Cyclotron (RIC-80) and intended to function on the C-80 beam was developed for this purpose. A brief description of the RIC-80 complex is given, and the results of the use of new methods and studies of target devices for the production of the generator radioisotope {sup 82}Sr; {sup 223}Ra, {sup 224}Ra, and {sup 225}Ac radioisotopes that undergo alpha-decay; {sup 67}Cu; and other medical radionuclides are presented. The use of a mass separator in the “on-line” mode to obtain ion beams of high-purity radioisotopes is a distinctive feature of the complex used in the project, and it is especially important for medical applications.

07 ISOTOPE AND RADIATION SOURCES↗

SU-E-J-03: A Comprehensive Comparison Between Alpha and Beta Emitters for Cancer Radioimmunotherapy

Purpose: The purpose of this study is to perform a comprehensive comparison of the therapeutic efficacy and cytotoxicity of alpha and beta emitters for Radioimmunotherapy (RIT). For each stage of cancer development, specific models were built for the separate objectives of RIT to be addressed:a) kill isolated cancer cells in transit in the lymphatic and vascular circulation,b) regress avascular cell clusters,c) regress tumor vasculature and tumors. Methods: Because of the nature of short range, high LET alpha and long energy beta radiation and heterogeneous antigen expression among cancer cells, the microdosimetric approach is essential for the RIT assessment. Geant4 based microdosimetric models are developed for the three different stages of cancer progression: cancer cells, cell clusters and tumors. The energy deposition, specific energy resulted from different source distribution in the three models was calculated separately for 4 alpha emitting radioisotopes ({sup 211}At, {sup 213}Bi, {sup 223}Ra and {sup 225}Ac) and 6 beta emitters ({sup 32}P, {sup 33}P, {sup 67}Cu, {sup 90}Y, {sup 131}I and {sup 177}Lu). The cell survival, therapeutic efficacy and cytotoxicity are determined and compared between alpha and beta emitters. Results: We show that internal targeted alpha radiation has advantages over beta radiation for killing isolated cancer cells, regressing small cell clusters and also solid tumors. Alpha particles have much higher dose specificity and potency than beta particles. They can deposit 3 logs more dose than beta emitters to single cells and solid tumor. Tumor control probability relies on deep penetration of radioisotopes to cancer cell clusters and solid tumors. Conclusion: The results of this study provide a quantitative understanding of the efficacy and cytotoxicity of RIT for each stage of cancer development.

60 APPLIED LIFE SCIENCES↗

Photonuclear Production of 67 Cu From Gallium

Copper-67 is a radioisotope of interest for medical imaging and therapy as well as for under- standing stellar and interstellar evolution pertaining to the formation of proton-rich nuclei. Since 67 Cu decays 100% to 67 Zinc, understanding this reaction can shed light on the abundance of this and other p-nuclei elements in the universe. Here, the photonuclear production of 67 Cu from 71 Ga and natural gallium is examined as an alternative to its photoproduction from zinc. Two research and development production runs were performed at Thomas Jefferson National Accelerator Facility using an electron linac. During the first run, an 805-W, 30.9-MeV beam was used to irradiate a 1-mm tungsten radiator to create a bremsstrahlung flux. The resulting gamma photons irradiated 50.9 g of natural gallium encased in a graphite crucible for 24.2 h; 7.02 Bq/W∙s∙kg of 67 Cu activity was produced. During the second run, a 4380-W, 31.5-MeV beam was used for 12.0 h on the same target containing 60 g of natural gallium; 6.41 Bq/W∙s∙kg of 67 Cu activity was produced. Because of the difficulties in spectroscopically differentiating 67 Cu from 67 Ga, prior to each run, an isotopically pure 71 Ga disk was irradiated using a 100-W beam for 1 h, at the same respective energies. Finally, these baseline irradiations allowed for separation of 67 Cu from 67 Ga in the spectroscopic measurements of the natural gallium targets.

07 ISOTOPE AND RADIATION SOURCES↗

Copper complexes: cytotoxicity and transport possibilities

A copper complex with N-(5,6-dihydro-4H-1,3-thiazin-2-yl)benzamide was synthesized for the first time and characterized by {sup 1}H NMR spectroscopy, LETDY mass spectrometry, and elemental analysis. A comparative study of the obtained complex and copper 2-aminopyrimidine complex was performed by flow cytometry on normal lymphocytes and Jurkat cells. Complexes with radionuclides {sup 64,67}Cu (with and wihout a carrier) were prepared, and distribution of the labeled complexes in the organs of mice was considered. Packing in carboxymethylcellulose-based microgels was proposed as a transport form for the complexes. The results show a promise of the obtained materials as potential radiopharmaceutical agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Covetic Materials for Process Control. Final CRADA report

GDC Industries LLC has been performing process research on covetic materials since its formation in February 2015. With assistance from DOE and the Air Force via SBIR projects, GDC focused on the enhancement of aluminum alloys to covetics to replicate a previously reported electrical conductivity of about 67% IACS (International Annealed Copper Standard). GDC has established a joint development agreement with General Cable Corporation, wherein General Cable agreed to perform numerous extrusions of as cast covetics and subsequent tensile and electrical conductivity tests on the resultant wire. Covetics conversion was proven but the significant improvement is yet to be replicated. To control the experiments towards enhanced process control, a series of designed experiments was created by an expert in process control from the automotive industry. Six process variables were identified and a designed experiment matrix requiring 18 independent conversions was created at GDC. The result of those designed experiments has now allowed GDC to focus on two process variables, namely, residence time and DC current in the conversions with the other four variable held constant. While this work is useful in replicating the earlier enhancements, GDC feels it will not be sufficient for the necessary process knowhow for scale up required by industry as GDC still does not have a direct correlation of the process variables to the actual carbon in the finished covetics. Since 2015, GDC has been aware of the capabilities existing at Argonne National Laboratory for performing carbon analysis that exceeds the precision commonly available to Industry. GDC and ANL submitted a proposal in response to the DOE-EERE – Small Business Vouchers Pliot Program announcement and the proposal was selected for funding. GDC will melt-process covetic aluminum samples following their design of experiment criteria and have the as-casted samples extruded by their partner, General Cable. Argonne will measure the conductivity, analyze carbon content, perform X-ray diffraction, and examine the microstructural features of the samples. Careful process variable measurements will be recorded by each party such that correlations can be developed indicating process parameters that yield the best carbon concentration in covetics.

36 MATERIALS SCIENCE↗

Methods to increase solid solution zirconium in aluminum alloys

A method of making an aluminum alloy containing zirconium includes heating a first composition comprising aluminum to a first temperature of greater than or equal to about 580° C. to less than or equal to about 800° C. The method further includes adding a second composition including a copper-zirconium compound to the first composition to form a third composition. The copper-zirconium compound of the second composition has a molar composition of greater than or equal to about 41% zirconium to less than or equal to about 67% zirconium and a balance of copper. The method also includes solidifying the third composition at a cooling rate of greater than or equal to about 0.1° C./second to less than or equal to about 100° C./second to a second temperature less than or equal to a solidus temperature and decomposing the copper-zirconium compound at a third temperature of less than or equal to about 715° C.

36 MATERIALS SCIENCE↗

Ligand Control of Structural Diversity in Luminescent Hybrid Copper(I) Iodides

Copper(I) iodide hybrids are of interest for next-generation lighting technologies because of their efficient luminescence in the absence of rare-earth elements. Here, we report 10 structurally diverse hybrid copper(I) iodides that emit in the green–red region with quantum yields reaching 67%. The compounds display a diversity of structures including ones with one-dimensional (1D) Cu–1 chains, Cu 2 I 2 rhomboid dimers, and structures with two different arrangements of Cu 4 I 4 tetramers. The compounds with Cu 2 I 2 rhomboid dimers or Cu 4 I 4 cubane tetramers have higher photoluminescence quantum yields than those with Cu–I 1D chains and octahedral Cu 4 I 4 tetramers, owing to the optimal degree of condensation of the inorganic motifs, which suppresses nonradiative processes. Electronic structure calculations on these compounds point out the critical influence of the inorganic motif and organic ligand on the nature of the band gaps and thus the excitation characteristics. Temperature-dependent photoluminescence spectra are presented to better understand the nature of luminescence in compounds with different inorganic motifs. Here. the emerging understanding of composition–structure–property correlations in this family provides inspiration for the rational design of hybrid phosphors for general lighting applications.

36 MATERIALS SCIENCE↗

Our Hidden Past: Precious Metals

Y-12's calutrons required electrical conductor material, but during the war, copper was in short supply. The U.S. Treasury loaned Y-12 14,700 tons of silver, valued at $600M. All but 67 tons was returned after the war, and those 67 tons remained in Building 9731 until 1970 for use in separating isotopes for medical research.

07 ISOTOPE AND RADIATION SOURCES↗

Examination of lutetium(III)-DOTA and copper(II)-NOTA solution structures using EXAFS

Targeted radionuclide therapy generally relies on the chelation of select short-lived isotopes such as 177 Lu and 67 Cu. The majority of Lu(III) and Cu(II) chelate structural information is derived from solid state diffraction data. Herein, the complexes Lu(DOTA) - , Cu(NOTA) - were examined in solution using EXAFS for the first time. Both ligands were fully deprotonated and coordinated to the metal with four and three carboxylic sites for Lu(DOTA) - and Cu(NOTA) - , respectively. Near-neighbor correlations from nitrogen atoms on the macrocyclic cages were also visible in the spectra in addition to the adjacent carbon backbones. Coordination numbers, bond distances, and Debye-Waller factors are reported and discussed alongside differences with known crystal structures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Study of components and statistical reaction mechanism in simulation of nuclear process for optimized production of {sup 64}Cu and {sup 67}Ga medical radioisotopes using TALYS, EMPIRE and LISE++ nuclear reaction and evaporation codes

Production of medical radioisotopes is one of the most important tasks in the field of nuclear technology. These radioactive isotopes are mainly produced through variety nuclear process. In this research, excitation functions and nuclear reaction mechanisms are studied for simulation of production of these radioisotopes in the TALYS, EMPIRE and LISE++ reaction codes, then parameters and different models of nuclear level density as one of the most important components in statistical reaction models are adjusted for optimum production of desired radioactive yields.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electro-Thermo-Mechanical (ETM) Study on Submarine Dynamic Power Cables (SDPC) for Offshore Wind Transmission

Understanding the failure mechanisms of submarine dynamic power cables (SDPC) is critical for innovative design to meet the 2035 cost reduction target of U.S. DOE Floating Offshore Wind Shot. This is important because the current design suffers a significant failure rate in the field. This project conducted a systematic electro-thermo-mechanical (ETM) experimental study on the power cores extracted from a 15kV power cable with three cores of copper conductor, ethylene propylene rubber (EPR) insulation, and continuously corrugated welded aluminum armor (CCWA). An ETM testing system was developed by integrating a high voltage (HV) amplifier, two ceramic heaters, and a rod-plate transverse compression setup into a mechanical testing machine. Increasing temperature from room temperature (RT, 22 degree C) to 90 degree C resulted in the 67% decrease in the failure mechanical load as defined by the dielectric breakdown. Under creep mechanical loading, the dielectric breakdown time was decreased by 70% for a given mechanical load when the specimen temperature increased from RT to 90oC. The failure strain in both monotonic and creep mechanical loading modes was related to the maximum mechanical load applied. Although the dielectric breakdown occurred in the ETM test, the post-test measurement revealed an impressive recovery of electric resistance. The failure analysis on cross section of tested specimens indicated a sizable gap across insulation layer near the area between copper conductor and loading rod, which apparently resulted from online dielectric failure and offline elastic recovery of components including conductor and insulation layer.

17 WIND ENERGY↗

Effect of Transverse Compression on the Dielectric Breakdown of Power Cable with Ethylene Propylene Rubber Insulation

Understanding of the failure mechanisms of submarine dynamic power cables (SDPC) is critical for innovative design to meet the 2035 cost reduction target of U.S. DOE Floating Offshore Wind Shot. This is important because the current design suffers a significant failure rate in the field. This project explored a multiphysics approach and conducted systematic electro-thermo-mechanical (ETM) experimental study on the power cores extracted from a 15 kV power cable. The power cable had three cores of copper conductor and ethylene propylene rubber (EPR) insulation. An ETM testing system with transverse compression capability was developed. Mechanical loading induced dielectric breakdown. Increasing temperature from room temperature (RT, 22 degrees Celsius) to 90 degrees Celsius resulted in the 67% decrease in the failure mechanical load as defined by the dielectric breakdown. With the same temperature rise, the creep mechanical load was reduced by 70% at a given dielectric breakdown time. The post-test measurement revealed an impressive recovery of electrical resistance, although the dielectric breakdown occurred in the ETM test that would not be captured without the use of ETM testing.

Wang, Hong [ORNL] (ORCID:0000000201730545)↗

Ion Beam Facility at the University of Chile; Applications and Basic Research

The main characteristics of the ion beam facility based on a 3.75 MeV Van de Graaff accelerator at the University of Chile are described at this work. Current activities are mainly focused on the application of the Ion Beam Analysis techniques for environmental, archaeological, and material science analysis. For instance, Rutherford Backscattering Spectrometry (RBS) is applied to measure thin gold film thickness which are used to determine their resistivity and other electrical properties. At this laboratory the Proton Induced X-Ray Emission (PIXE) and Proton Elastic Scattering Analysis (PESA) methodologies are extensively used for trace element analysis of urban aerosols (Santiago, Ciudad de Mexico). A similar study is being carried out at the Antarctica Peninsula. Characterization studies on obsidian and vitreous dacite samples using PIXE has been also perform allowing to match some of these artifacts with geological source sites in Chile.Basic physics research is being carried out by measuring low-energy cross section values for the reactions {sup 63}Cu(d,p){sup 64}Cu and {sup Nat}Zn(p,x){sup 67}Ga. Both radionuclide {sup 64}Cu and {sup 67}Ga are required for applications in medicine. Ongoing stopping power cross section measurements of proton and alphas on Pd, Cu, Bi and Mylar are briefly discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Materials Data on Na5Cu2H14S4O19 by Materials Project

CuNa5CuH14S4O19 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional and consists of four copper molecules and one Na5CuH14S4O19 framework. In the Na5CuH14S4O19 framework, there are five inequivalent Na1+ sites. In the first Na1+ site, Na1+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing NaO6 octahedra. The corner-sharing octahedral tilt angles are 67°. There are a spread of Na–O bond distances ranging from 2.36–2.54 Å. In the second Na1+ site, Na1+ is bonded in a 5-coordinate geometry to five O2- atoms. There are a spread of Na–O bond distances ranging from 2.33–2.66 Å. In the third Na1+ site, Na1+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing NaO6 octahedra. The corner-sharing octahedral tilt angles are 65°. There are a spread of Na–O bond distances ranging from 2.38–2.52 Å. In the fourth Na1+ site, Na1+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing NaO6 octahedra. The corner-sharing octahedral tilt angles are 67°. There are a spread of Na–O bond distances ranging from 2.35–2.60 Å. In the fifth Na1+ site, Na1+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing NaO6 octahedra. The corner-sharing octahedral tilt angles are 65°. There are a spread of Na–O bond distances ranging from 2.40–2.54 Å. Cu+1.50+ is bonded in a 5-coordinate geometry to five O2- atoms. There are a spread of Cu–O bond distances ranging from 2.00–2.57 Å. There are fourteen inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the third H1+ site, H1+ is bonded in a single-bond geometry to two O2- atoms. There is one shorter (1.00 Å) and one longer (1.76 Å) H–O bond length. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the twelfth H1+ site, H1+ is bonded in a single-bond geometry to two O2- atoms. There is one shorter (1.00 Å) and one longer (1.75 Å) H–O bond length. In the thirteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. There are four inequivalent S4+ sites. In the first S4+ site, S4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There are a spread of S–O bond distances ranging from 1.49–1.55 Å. In the second S4+ site, S4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There are a spread of S–O bond distances ranging from 1.49–1.55 Å. In the third S4+ site, S4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There is one shorter (1.52 Å) and two longer (1.54 Å) S–O bond length. In the fourth S4+ site, S4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There is two shorter (1.52 Å) and one longer (1.53 Å) S–O bond length. There are nineteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to one S4+ atom. In the second O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to three Na1+ and one S4+ atom. In the third O2- site, O2- is bonded in a 4-coordinate geometry to two Na1+, one H1+, and one S4+ atom. In the fourth O2- site, O2- is bonded in a 4-coordinate geometry to two Na1+, one H1+, and one S4+ atom. In the fifth O2- site, O2- is bonded to three Na1+ and one S4+ atom to form distorted corner-sharing ONa3S tetrahedra. In the sixth O2- site, O2- is bonded in a distorted water-like geometry to one Na1+, one Cu+1.50+, and two H1+ atoms. In the seventh O2- site, O2- is bonded in a distorted water-like geometry to two equivalent Na1+ and two H1+ atoms. In the eighth O2- site, O2- is bonded in a distorted water-like geometry to one Na1+ and two H1+ atoms. In the ninth O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the tenth O2- site, O2- is bonded in a distorted water-like geometry to one Na1+ and two H1+ atoms. In the eleventh O2- site, O2- is bonded in a water-like geometry to one Na1+ and two H1+ atoms. In the twelfth O2- site, O2- is bonded in a distorted water-like geometry to one Na1+ and two H1+ atoms. In the thirteenth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Na1+ and one S4+ atom. In the fourteenth O2- site, O2- is bonded in a distorted trigonal planar geometry to one Na1+, one Cu+1.50+, and one S4+ atom. In the fifteenth O2- site, O2- is bonded to two Na1+, one Cu+1.50+, and one S4+ atom to form distorted ONa2CuS trigonal pyramids that share corners with two equivalent ONa3S tetrahedra and corners with two equivalent ONa2CuS trigonal pyramids. In the sixteenth O2- site, O2- is bonded to two Na1+, one Cu+1.50+, and one S4+ atom to form distorted ONa2CuS trigonal pyramids that share corners with two equivalent ONa3S tetrahedra and corners with two equivalent ONa2CuS trigonal pyramids. In the seventeenth O2- site, O2- is bonded in a distorted trigonal planar geometry to one Na1+, one Cu+1.50+, and one S4+ atom. In the eighteenth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Na1+ and one S4+ atom. In the nineteenth O2- site, O2- is bonded in a single-bond geometry to one S4+ atom.

36 MATERIALS SCIENCE↗

Imaging and dosimetric characteristics of 67 Cu

In recent years the use of beta-emitting radiopharmaceuticals for cancer therapy has expanded rapidly following development of therapeutics for neuroendocrine tumors, prostate cancer, and other oncologic malignancies. One emerging beta-emitting radioisotope of interest for therapy is 67 Cu (t 1/2 : 2.6 d) due to its chemical equivalency with the widely-established positron-emitting isotope 64 Cu (t 1/2 : 12.7 h). Here we evaluate both the imaging and dosimetric characteristics of 67 Cu, as well as producing the first report of SPECT/CT imaging using 67 Cu. To this end, 67 Cu was produced by photon-induced reactions on isotopically-enriched 68 Zn at the Low-Energy Accelerator Facility (LEAF) of Argonne National Laboratory, followed by bulk separation of metallic 68 Zn by sublimation and radiochemical purification by column chromatography. Gamma spectrometry was performed by efficiency-calibrated high-purity germanium (HPGe) analysis to verify absolute activity calibration and establish radionuclidic purity. Absolute activity measurements corroborated manufacturer-recommended dose-calibrator settings and no radionuclidic impurities were observed. Using the Clinical Trials Network anthropomorphic chest phantom, SPECT/CT images were acquired. Medium Energy (ME) SPECT collimation was found to provide the best image quality from the primary 185 keV gamma emission of 67 Cu. Reconstructed images of 67 Cu were similar in quality to images acquired using 177 Lu. Recovery coefficients were calculated and compared against quantitative images of 99m Tc, 177 Lu, and 64 Cu within the same anthropomorphic chest phantom. Production and clinical imaging of 67 Cu appears feasible, and future studies investigating the therapeutic efficacy of 67 Cu-based radiopharmaceuticals are warranted.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Half-life of 67 Cu

The half-life of 67 Cu was determined through serial gamma-ray spectrometry measurements of the dominant gamma emission (E γ : 184.6 keV; branching ratio: 48.7%) produced following β- decay. Data were collected consecutively for 1000 s per measurement, with a total of 3063 measurements over the duration of 36 days. The incidence rate for the 184.6 keV gamma-ray was determined from the spectral peak area and duration of each measurement. This rate was then corrected to account for detector dead-time, radioactive decay during each acquisition and drift in the computer clock in comparison to NIST nuclear clock. Least-squares regression analysis was performed to determine the half-life of 67 Cu. The result was 61.761 ± 0.004 h, which is the highest precision measurement to date, and marks a 24-fold precision improvement over the current Nuclear Data Sheets value.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗