Search NASA⌕ Search

SEARCH · Search NASA

Results for “COPPER COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Unraveling the Formation Mechanism of a Hybrid Zr-Based Chemical Conversion Coating with Organic and Copper Compounds for Corrosion Inhibition

Environmental-friendly chromate-free, zirconium (Zr)-based conversion coating is a promising green technology for corrosion protection. Additives in the surface treatment provides critical functionalities and performance improvements; however, mechanistic understanding as of how the additives influence the coatings remains unclear. In this study, a new organic-inorganic hybrid Zrbased conversion coating which combines copper (Cu) compounds and polyamidoamine (PAMAM), taking advantages of a complementary nature of organic and inorganic additives. Here, a multimodal approach combining electron and X-ray characterization is applied to study the interaction of Cu 2+ and PAMAM and the resulting impacts on the coating formation. Adding PAMAM changed the surface morphology, thickness, distribution of Cu in the cluster and void formation of the coatings. High PAMAM (100-200 pm) leads to little conversion coating formation, and low PAMAM (0-25 ppm) shows voids formation under the coatings. Moreover, PAMAM incorporates in the coating in a form of PAMAM-Cu complex with a higher concentration towards the surface, provides an organic layer at the surface of the coating. X-ray absorption near-edge structure (XANES) spectroscopy shows a difference between the conventional and hybrid coating treatments in an alkaline solution to simulate the E-coat process, suggesting the contribution of PAMAM in the enhanced chemical stability in an alkaline environment. Therefore, an intermediate range of addition of PAMAM (50 ppm) is optimal to 1) avoid excessive voids formation, 2) promote some Cu cluster formation and thus enhancing the Zr-based coating formation and 3) incorporate organic components into the coating to improve the adhesion of the subsequent coatings. Overall, this work furthers our knowledge on the formation mechanism of an effective and environmentally friendly hybrid conversion coating for corrosion inhibition, demonstrating a critical processing-structureproperty relationship. This study will benefit future development of green and effective surface treatment technology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Uncovering a CF 3 Effect on X‐ray Absorption Energies of [Cu(CF 3 ) 4 ] − and Related Copper Compounds by Using Resonant Diffraction Anomalous Fine Structure (DAFS) Measurements**

Abstract Understanding the electronic structures of high‐valent metal complexes aids the advancement of metal‐catalyzed cross coupling methodologies. A prototypical complex with formally high valency is [Cu(CF 3 ) 4 ] − (1), which has a formal Cu(III) oxidation state but whose physical analysis has led some to a Cu(I) assignment in an inverted ligand field model. Recent examinations of1by X‐ray spectroscopies have led previous authors to contradictory conclusions, motivating the re‐examination of its X‐ray absorption profile here by a complementary method, resonant diffraction anomalous fine structure (DAFS). From analysis of DAFS measurements for a series of seven mononuclear Cu complexes including1, here it is shown that there is a systematic trifluoromethyl effect on X‐ray absorption that blue shifts the resonant Cu K‐edge energy by 2–3 eV per CF 3 , completely accounting for observed changes in DAFS profiles between formally Cu(III) complexes like1and formally Cu(I) complexes like (Ph 3 P) 3 CuCF 3 (3). Thus, in agreement with the inverted ligand field model, the data presented herein imply that1is best described as containing a Cu(I) ion with d n count approaching 10.

Chemistry↗

Electrochemical properties of copper-based compounds with polyanion frameworks

The copper-based polyanion compounds Li{sub 6}CuB{sub 4}O{sub 10} and Li{sub 2}CuP{sub 2}O{sub 7} were synthesized using a conventional solid-state reaction, and their electrochemical properties were determined. Li{sub 6}CuB{sub 4}O{sub 10} showed reversible capacity of 340 mA g{sup −1} at the first discharge–charge process, while Li{sub 2}CuP{sub 2}O{sub 7} showed large irreversible capacity and thus low charge capacity. Ex situ X-ray diffraction (XRD) and X-ray absorption near edge structure (XANES) measurements revealed that the electrochemical Li{sup +} intercalation/deintercalation reaction in Li{sub 6}CuB{sub 4}O{sub 10} occurred via reversible Cu{sup 2+}/Cu{sup +} reduction/oxidation reaction. These differences in their discharge/charge mechanisms are discussed based on the strength of the Cu–O covalency via their inductive effects. - Graphical abstract: Electrochemical properties for Cu-based polyanion compounds were investigated. The electrochemical reaction mechanisms are strongly affected by their Cu–O covalentcy. - Highlights: • Electrochemical properties of Cu-based polyanion compounds were investigated. • The Li{sup +} intercalation/deintercalation reaction progressed in Li{sub 6}CuB{sub 4}O{sub 10}. • The electrochemical displacement reaction progressed in Li{sub 2}CuP{sub 2}O{sub 7}. • The strength of Cu–O covalency affects the reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrode designs for high energy density, efficiency, and capacity in rechargeable alkaline batteries

A secondary alkaline battery includes an anode, a cathode, and an electrolyte. The cathode includes a current collector, a cathode mixture in electrical contact with the current collector. The cathode mixture comprises: manganese oxide, a copper compound comprising copper, a salt of copper, an alloy thereof, or any combination thereof, a bismuth compound comprising bismuth, a salt of bismuth, or any combination thereof, and a conductive carbon. The secondary alkaline battery can also include a first composition in contact with the current collector and disposed between the current collector and the cathode mixture that includes copper, a salt of copper, an alloy thereof, or a combination thereof.

Yadav, Gautam G.↗

Synthesis, characterisation, electrical and optical properties of copper borate compounds

Highlights: • Cu(BO{sub 2}){sub 2} was synthesized at the form of with pdf number of “00-001-0472”. • Particle sizes were found between 162.72 and 56.44 nm and 195.76 and 75.73 nm at CuSNaH. • Reaction yields were 90.4 ± 0.84, 96.9 ± 0.78 and 78.9 ± 0.76% for CuST, CuSB and CuSNaH. • The resistivity of CuST, CuSB and CuSNaH are 1.10 × 10{sup 7}, 7.02 × 10{sup 6} and 8.62 × 10{sup 5} Ωm. • The optical energy gap was 3.76 eV. - Abstract: The hydrothermal synthesis of copper borate compounds [Cu(BO{sub 2}){sub 2}] was studied, and several parameters were found to affect the synthesis. Raw materials, including CuSO{sub 4}·5H{sub 2}O, Na{sub 2}B{sub 4}O{sub 7}·5H{sub 2}O, Na{sub 2}B{sub 4}O{sub 7}·10H{sub 2}O, NaOH and H{sub 3}BO{sub 3}, were used. Reaction temperatures and reaction times between 40 °C and 100 °C and 15 and 240 min, respectively, were used. The as-synthesised copper borate was analysed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The yields of the reactions were also calculated. Single-phase, nanoparticulate copper borate compounds (Cu(BO{sub 2}){sub 2}) possessing high XRD crystal scores were obtained; the reactions used to obtain these materials were highly efficient. Electrical resistivity and optical absorbance measurements were carried out on the compounds obtained from the highest yielding reactions. The results of this study showed that even using a reaction time of 15 min, copper borate formation was successfully achieved.

36 MATERIALS SCIENCE↗

Photoelectrochemical Hydrogen Production (Final Report)

The objectives of this project, covering two phases and an additional extension phase, were the development of thin film-based hybrid photovoltaic (PV)/photoelectrochemical (PEC) devices for solar-powered water splitting. The hybrid device, comprising a low-cost photoactive material integrated with amorphous silicon (a-Si:H or a-Si in short)-based solar cells as a driver, should be able to produce hydrogen with a 5% solar-to-hydrogen conversion efficiency (STH) and be durable for at least 500 hours. Three thin film material classes were studied and developed under this program: silicon-based compounds, copper chalcopyrite-based compounds, and metal oxides . With the silicon-based compounds, more specifically the amorphous silicon carbide (a-SiC), we achieved a STH efficiency of 3.7% when the photoelectrode was coupled to an a-Si tandem solar cell, and a STH efficiency of 6.1% when using a crystalline Si PV driver. The hybrid PV/a-SiC device tested under a current bias of -3~4 mA/cm 2 , exhibited a durability of up to ~800 hours in 0.25 M H 2 SO 4 electrolyte. Other than the PV driver, the most critical element affecting the photocurrent (and hence the STH efficiency) of the hybrid PV/a-SiC device was the surface energetics at the a-SiC/electrolyte interface. Without surface modification, the photocurrent of the hybrid PEC device was ~1 mA/cm 2 or lower due to a surface barrier that limits the extraction of photogenerated carriers. We conducted an extensive search for suitable surface modification techniques/materials, of which the deposition of low work function metal nanoparticles was the most successful. Metal nanoparticles of ruthenium (Ru), tungsten (W) or titanium (Ti) led to an anodic shift in the onset potential. We have also been able to develop hybrid devices of various configurations in a monolithic fashion and optimized the current matching via altering the energy bandgap and thickness of each constituent cell. As a result, the short-circuit photocurrent density of the hybrid device (measured in a 2-electrode configuration) increased significantly without assistance of any external bias, i.e. from ≤1 mA/cm 2 to ~5 mA/cm 2 . With the copper chalcopyrite compounds, we have achieved a STH efficiency of 3.7% in a coplanar configuration with 3 a-Si solar cells and one CuGaSe 2 photocathode. This material class exhibited good durability at a photocurrent density level of -4 mA/cm 2 (“5% STH” equivalent) at a fixed potential (-0.45 V RHE ). A poor band-edge alignment with the hydrogen evolution reaction (HER) potential was identified as the main limitation for high STH efficiency. Three new pathways have been identified to solve this issue. First, PV driver with bandgap lower than that of amorphous silicon were investigated. Crystalline silicon was identified as possible bottom cell. Mechanical stacks made with one Si solar cell and one CuGaSe 2 photocathode were built. A 400 mV anodic shift was observed with the Si cell, leading to photocurrent density of -5 mA/cm 2 at 0V RHE (compared to 0 mA/cm 2 at the same potential without PV driver). We also investigated the use of p-n junctions to shift CuGaSe 2 flatband potential anodically. Reactively sputtered zinc oxy-sulfide thin films was evaluated as n-type buffer and deposited on CuGaSe 2 . Ruthenium nanoparticles were then added as HER catalyst. A 250 mV anodic shift was observed with the p-n junction, leading to photocurrent density at 0V RHE of -1.5 mA/cm 2 . Combining this device with a Si solar cell in a mechanical stack configuration shifted the onset potential further (+400 mV anodically), leading to photocurrent density of -7 mA/cm 2 at 0V RHE . Finally, we developed wide bandgap copper chalcopyrite thin film materials. We demonstrated that Se can be substituted with S using a simple annealing step. Photocurrent densities in the 5-6 mA/cm 2 range were obtained with red 2.0eV CuInGaS 2 photocathodes. With the metal oxide compounds, we have demonstrated that a WO 3 -based hybrid photoelectrode was feasible. Specifically, we showed that WO 3 paired with an a-Si tandem solar cell can generate short circuit photocurrent density of 2.5 mA/cm 2 , equivalent to STH efficiency of 3.1%. Long-term durability tests demonstrated WO 3 ability to split water over extended periods, for up to 600 hours at current density levels of 2.0-2.5 mA/cm 2 . Efforts have been done to decrease WO 3 bandgap using foreign elements incorporation. We did not manage to reduce the bandgap of WO 3 with this method. However, more promising results have been achieved with bilayered systems, where only the top part of WO 3 films was modified. Also, we have demonstrated that alloying WO 3 with CuO can form 2.2eV bandgap CuWO 4 . Incorporating conductive carbon nanotubes in CuWO 4 reduced its intrinsic bulk resistance. Saturation photocurrent densities in the 0.4-0.5 mA/cm 2 range were achieved. Recently, in collaboration with University of Texas at Arlington, we have identified new quaternary metal oxides with CuWO 4 as primary material host. Our experimental work on ceramics confirmed the theoretical calculations that crowned bismuth as a possible candidate to improve CuWO 4 water splitting efficiency.

08 HYDROGEN↗

Mixed material cathode for secondary alkaline batteries

A secondary alkaline battery using manganese dioxide is described. The battery includes a mixed cathode material with birnessite-phase manganese dioxide or electrolytic manganese dioxide (EMD), a bismuth compound and a copper compound selected from the group consisting of elemental copper and a copper salt. In some embodiments, a conductive carbon and/or a binder may also be included.

25 ENERGY STORAGE↗

Mixed material cathode for secondary alkaline batteries

A secondary alkaline battery using manganese dioxide is described. The battery includes a mixed cathode material with birnessite-phase manganese dioxide or electrolytic manganese dioxide (EMD), a bismuth compound and a copper compound selected from the group consisting of elemental copper and a copper salt. In some embodiments, a conductive carbon and/or a binder may also be included.

25 ENERGY STORAGE↗

Spin triplet ground-state in the copper hexamer compounds A 2 C u 3 O ( S O 4 ) 3 ( A = Na , K )

The compounds ${A}_{2}\mathrm{C}{\mathrm{u}}_{3}\mathrm{O}{(\mathrm{S}{\mathrm{O}}_{4})}_{3}(A=\mathrm{Na},\mathrm{K})$ are characterized by copper hexamers which are weakly coupled along the $b$ axis to realize one-dimensional antiferromagnetic chains below ${T}_{\mathrm{N}}{\approx}3\mathrm{K}$, whereas the interchain interactions along the $a$ and $c$ axes are negligible. Here we investigated the energy-level splittings of the copper hexamers by inelastic neutron scattering below and above ${T}_{\mathrm{N}}$. The eight lowest-lying hexamer states could be unambiguously assigned and parametrized in terms of a Heisenberg exchange Hamiltonian, providing direct experimental evidence for an $S=1$ triplet ground-state associated with the copper hexamers. Therefore, the compounds ${A}_{2}\mathrm{C}{\mathrm{u}}_{3}\mathrm{O}{(\mathrm{S}{\mathrm{O}}_{4})}_{3}$ serve as cluster-based spin-1 antiferromagnets to support Haldane's conjecture that a gap appears in the excitation spectrum below ${T}_{\mathrm{N}}$, which was verified by inelastic neutron scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A photoelectron spectroscopy study of the electronic structure evolution in CuInSe{sub 2}-related compounds at changing copper content

Evolution of the valence-band structure at gradually increasing copper content has been analysed by x-ray photoelectron spectroscopy (XPS) in In{sub 2}Se{sub 3}, CuIn{sub 5}Se{sub 8}, CuIn{sub 3}Se{sub 5}, and CuInSe{sub 2} single crystals. A comparison of these spectra with calculated total and angular-momentum resolved density-of-states (DOS) revealed the main trends of this evolution. The formation of the theoretically predicted gap between the bonding and non-bonding states has been observed in both experimental XPS spectra and theoretical DOS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The production of copper phthalocyanine and/or its derivatives

This document discusses the production of copper phthalocyanine and/or its derivatives, which are useful for dye pigments. The method described uses urea, a copper compound and/or a catalyst which have been suspended in an inert reaction medium. The copper compound, catalyst and urea fused and the reaction is performed by using the obtained fusion. The advantages of the invention are listed.

Segawa, T.↗

Spin-coupling topology in the copper hexamer compounds A 2 Cu 3 O(SO 4 ) 3 ( A =Na, K)

The compounds A 2 Cu 3 O(SO 4 ) 3 (A=Na,K) are characterized by copper hexamers that are weakly coupled to realize antiferromagnetic order below TN≈3K. They constitute quantum spin systems with S=1 triplet ground states. In this work, we investigated the energy-level splittings of the copper hexamers by inelastic neutron scattering experiments covering the entire range of the magnetic excitation spectra. Additionally, the observed transitions are governed by very unusual selection rules that we ascribe to the underlying spin-coupling topology. This is rationalized by model calculations that allow an unambiguous interpretation of the magnetic excitations concerning both the peak assignments and the nature of the spin-coupling parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imbalanced spin coupling in the copper hexamer compounds A 2 Cu 3 O(SO 4 ) 3 ( A 2 = Na 2 , NaK, K 2 )

The minerals A 2 Cu 3 O(SO 4 ) 3 (A 2 = Na 2 ,NaK,K 2 ) constitute quantum spin systems with copper hexamers as basic structural units. Strong intrahexamer spin couplings give rise to an effective triplet ground state. Weak interhexamer spin couplings are responsible for two-dimensional long-range magnetic order in the (b,c) plane below 3.0 < T c < 4.7K. We investigated the magnetic excitations at T = 1.5 K by inelastic neutron scattering (INS). Furthermore, the INS technique was based on the observation of wave vector dependent slices in reciprocal space in order to selectively probe the magnetic signals in different Brillouin zones with different weight. Due to the imbalance of the spin couplings, the data analysis relies on a model in which the interhexamer spin couplings are treated perturbatively on top of the exact S = 1 ground state. The interhexamer spin couplings turn out to be ferromagnetic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methanobactin: A Novel Copper-Binding Compound Produced by Methanotrophs

Aerobic methanotrophs are a novel group of microorganisms that play a critical role in the global carbon cycle. Expression and activity of a key enzyme in the metabolism in these microbes, the methane monooxygenase, is controlled by the availability of copper. To sequester copper, some methanotrophs produce a ribosomally synthesized post-translationally modified polypeptide called methanobactin. Here, this peptide, or chalkophore, has unique features, with all known forms being small (< 1300 Da) with two heterocyclic rings with associated thioamide groups that bind copper quite strongly. Here we provide an overview of the known diversity of methanobactins, describe the genetics underlying methanobactin biosynthesis, the variety of functions methanobactin has been observed to have, as well as various environmental, industrial and medical applications of methanobactin.

54 ENVIRONMENTAL SCIENCES↗

Effect of Covalent Bonding on Magnetism and the Missing Neutron Intensity in Copper Oxide Compounds

Theories involving highly energetic spin fluctuations are among the leading contenders for explaining high-temperature superconductivity in the cuprates. These theories could be tested by inelastic neutron scattering (INS), as a change in the magnetic scattering intensity that marks the entry into the superconducting state provides a precise quantitative measure of the spin-interaction energy involved in the superconductivity. However, the absolute intensities of spin fluctuations measured in neutron scattering experiments vary widely, and are usually much smaller than expected from fundamental sum rules, resulting in 'missing' INS intensity. Here, we solve this problem by studying magnetic excitations in the one-dimensional related compound, Sr{sub 2}CuO{sub 3}, for which an exact theory of the dynamical spin response has recently been developed. In this case, the missing INS intensity can be unambiguously identified and associated with the strongly covalent nature of magnetic orbitals. We find that whereas the energies of spin excitations in Sr{sub 2}CuO{sub 3} are well described by the nearest-neighbour spin-1/2 Heisenberg Hamiltonian, the corresponding magnetic INS intensities are modified markedly by the strong 2p-3d hybridization of Cu and O states. Hence, the ionic picture of magnetism, where spins reside on the atomic-like 3d orbitals of Cu{sup 2+} ions, fails markedly in the cuprates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transport and thermoelectric properties in Copper intercalated TiS{sub 2} chalcogenide

We report on the thermoelectric properties of Cu{sub x}TiS{sub 2} bulk compounds. Copper cations have been intercalated into the layered chalcogenide TiS{sub 2} by spark plasma sintering. X-ray diffraction analysis coupled to transmission electron microscopy shows that the lattice constant c expands linearly as the Cu content x increases. The Cu-intercalation into TiS{sub 2} leads to substantial decrease in both electrical resistivity and lattice thermal conductivity as compared to those of pristine TiS{sub 2}. The figure of merit, ZT, is increased up to 0.45 at 800 K for x = 0.02. The power factor, PF, reaches 1.7 mW/mK{sup 2} in TiS{sub 2} at 325 K.

36 MATERIALS SCIENCE↗