Search NASA⌕ Search

SEARCH · Search NASA

Results for “CROSS COUPLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effects of Gyroscopic Cross Coupling Between Pitch and Yaw on the Handling Qualities of VTOL Aircraft

Gyroscopic cross coupling between pitch and yaw was simulated with a variable-stability helicopter while hovering in a yawing maneuver to ascertain the effect of cross coupling on handling qualities. Pilot ratings of the controllability of cross coupling were obtained for various combinations of longitudinal control power, angular velocity about the yaw axis, and simulated engine angular momentum. A theoretical investigation, supplemented by simulator data, was undertaken to determine the effect of longitudinal damping on the coupling controllability. Also, a comparison was made between flight and simulator data. The results indicated that for an aircraft with otherwise satisfactory longitudinal handling qualities, the level of cross coupling is satisfactory when less than 30 percent of the available longitudinal control will trim out the largest gyroscopic coupling moment which might be encountered. Increased longitudinal damping resulted in a significant increase in the controllability of pitch-yaw gyroscopic cross coupling.

Garren, John F., Jr.↗

Cross coupling in pilot/vehicle systems

Multiloop pilot/vehicle analysis is applied to the problem of determining crossfeed techniques which may be employed by pilots in minimizing the effects of vehicle cross coupling. As used here, cross coupling refers to unwanted vehicle motion which occurs in one control axis or loop as the result of pilot control actuation in another control axis or loop. The minimization or elimination of such cross coupling can contribute significantly to the 'workload' associated with tasks like nap-of-the-earth helicopter flight. In contrast, situations arise in which pilot's may use vehicle cross coupling to improve performance by coordinating two control actuations in the control of a single response variable. A crossfeed model is developed based upon simple control system design principles and configured in a manner amenable to pilot pursuit or precognitive control activity. A handling qualities theory developed to analyze single loop tasks is applied to the multiloop problem. The crossfeed model is applied to five different vehicles/configurations ranging from helicopters to fighter aircraft. Results indicate relatively simple crossfeed commands can significantly reduce cross coupling and, in some improve handling qualities as predicted by the single loop theory.

Hess, R. A.↗

Cross Coupling Between Attenuators In A Docking Mechanism

Cross coupling between motion attenuators on opposite sides of docking mechanism proposed as means of increasing capture envelope. Prototype system for application of cross-coupling concept is one used for docking of Apollo and Soyuz spacecraft; however, given widespread use of docking mechanisms, concept may prove useful in many terrestrial applications as well.

Holmberg, Arthur↗

Effects of Gyroscopic Cross Coupling between Pitch and Roll on the Handling Qualities of VTOL Aircraft

In order to provide information relative to the effects of gyroscopic cross coupling between pitch and roll on the handling qualities of VTOL aircraft, a flight investigation has been conducted during which cross coupling was simulated. Generality is achieved by presenting the results of the flight investigation in the form of a criterion which may be used t o predict the acceptability of the level of cross coupling in VTOL aircraft as a function of the aircraft design parameters. The criterion is based on pilot's opinions of the acceptability of the motions for the range of cross coupling which was simulated during a maneuver in which cross coupling is particularly objectionable. is used to provide a basis for application of the criterion. The theory which i s developed is shown to predict accurately the aircraft motions.

Garren, John F., Jr.↗

Effects of visual reference on adaptation to motion sickness and subjective responses evoked by graded cross-coupled angular accelerations

Three groups of 10 subjects each were exposed to stepwise increments of cross coupled angular accelerations in three visual modes: internal visual reference (IVR), external visual reference (EVR), and vision absent (VA). The subjects in the IVR condition required significantly greater amounts of stimulus exposure to neutralize their illusory subjective reactions. They also suffered a greater loss of well-being and a more marked incidence of motion sickness than did subjects in the EVR and VA conditions. The same 30 subjects were reexposed to the same graded cross coupled stimulation 1 week later. This time, however, all the subjects were tested under only the IVR condition. All three groups showed some positive transfer of adaptation, but only the IVR-IVR combination required significantly fewer head motions to achieve the same level of adaptation on the second occasion. Taken overall, however, the most efficient and least disturbing route to adaptation at the completion of the second test was via the VA-IVR combination.

Reason, J. T.↗

In-flight simulation investigation of rotorcraft pitch-roll cross coupling

An in-flight simulation experiment investigating the handling qualities effects of the pitch-roll cross-coupling characteristic of single-main-rotor helicopters is described. The experiment was conducted using the NASA/Army CH-47B variable stability helicopter with an explicit-model-following control system. The research is an extension of an earlier ground-based investigation conducted on the NASA Ames Research Center's Vertical Motion Simulator. The model developed for the experiment is for an unaugmented helicopter with cross-coupling implemented using physical rotor parameters. The details of converting the model from the simulation to use in flight are described. A frequency-domain comparison of the model and actual aircraft responses showing the fidelity of the in-flight simulation is described. The evaluation task was representative of nap-of-the-Earth maneuvering flight. The results indicate that task demands are important in determining allowable levels of coupling. In addition, on-axis damping characteristics influence the frequency-dependent characteristics of coupling and affect the handling qualities. Pilot technique, in terms of learned control crossfeeds, can improve performance and lower workload for particular types of coupling. The results obtained in flight corroborated the simulation results.

Watson, Douglas C.↗

Conditioned feeding suppression in rats produced by cross-coupled and simple motions

Results are presented of an experiment on the induction of motion sickness in rats by the use of cross-coupled accelerations of magnitudes similar to those used in human experiments. Accelerations were produced in a seesaw apparatus with rotating disks supporting the animal cages mounted on each seesaw arm, and motion sickness was assessed according to the consumption of a sweet food previously offered to the animals immediately before the motion treatment. During a 1-hour test session 72 h after motion treatment and after a 24-h fast, rats having undergone cross-coupled vertical sinusoidal and rotational motion are observed to consume less food than those having experienced either type of motion alone, or no motion. The ordering of the conditioned suppressive feeding effects is consistent with the amounts of vestibular stimulation produced by the respective motions. The results support the existence of motion sickness effects in rats, even though they are unable to vomit.

Fox, R. A.↗

Quantification of Cross-coupling and Motion Feedthrough for Multiaxis Controllers Used in an Air Combat Flying Task

A real-time piloted simulation of an air-to-air combat flying task using a wings-level-turn aircraft and various novel controllers was conducted. One objective is to quantify how the pilot interacts with the controllers and control modes, including: (1) controller versus aircraft response; (2) proprioceptive cross-coupling among axes of the controllers; and (3) biodynamic cross-coupling between the aircraft motions and the controllers. In order to aid in identifying the items listed above, both the target aircraft and the large amplitude multimode aerospace research simulator (LAMARS) motion system were distributed with quasi-random sums-of-sinusoids. Since the disturbances were separated in frequency, spectral analysis techniques were used to identify the three items listed. The results of the spectral analysis of controller motions from the two-axis side stick, a twist grip mounted on the side stick, a thumb button mounted on the side stick, and conventional rudder pedals are presented. Conclusions and recommendations for further research are also presented.

Jewell, W. E.↗

Implementation of CAPIO for Composite Adaptive Control of Cross-Coupled Unstable Aircraft

This paper presents an implementation of a recently developed control allocation algorithm CAPIO (a Control Allocation technique to recover from Pilot Induced Oscillations) for composite adaptive control of an inertially cross coupled unstable aircraft. When actuators are rate-saturated due to either an aggressive pilot command, high gain of the flight control system or some anomaly in the system, the effective delay in the control loop may increase due to the phase shifting between the desired and the achieved system states. This effective time delay may deteriorate the performance or even destabilize the system in some cases, depending on the severity of rate saturation. CAPIO reduces the effective time delay by minimizing the phase shift between the commanded and the actual attitude accelerations. We present simulation results for an unstable aircraft with cross-coupling controlled with a composite adaptive controller in the presence of rate saturation. The simulations demonstrate the potential of CAPIO serving as an effective rate saturation compensator in adverse conditions.

Yildiz, Yildiray↗

The influence of gravitoinertial force level on oculomotor and perceptual responses to Coriolis, cross-coupling stimulation

The goal of the present experiment was to determine whether gravitoinertial force magnitude influences oculomotor and perceptual responses to Coriolis cross-coupling stimulation. Blindfolded subjects who were rotating at constant velocity were asked to make standardized head movements during the free-fall and high-force phases of parabolic flight, and the characteristics of their horizontal nystagmus and the magnitude of their experienced self-motion were measured. Both responses were less intense in the free-fall periods than in the high-force periods. These findings suggest that the response to semicircular canal stimulation depends on the background level of gravitoinertial force.

Dizio, Paul↗

A helicopter flight investigation of roll-control sensitivity, damping and cross coupling in a low altitude lateral maneuvering task

A helicopter in-flight simulation was conducted to determine the effects of variations in roll damping, roll sensitivity, and pitch and roll rate cross-coupling on helicopter flying qualities in a low altitude maneuver. The experiment utilized the UH-1H helicopter in-flight simulator, which is equipped with the V/STOLAND avionics system. The response envelope of this vehicle allowed simulation of configurations with low to moderate damping and sensitivity. A visual, low level slalom course was set up, consisting of constant speed and constant altitude S-turns around the 1000 ft makers of an 8000 ft runway. Results are shown in terms of Cooper-Harper pilot ratings, pilot commentary, and statistical and frequency analyses of the lateral characteristics. These results show good consistency with previous ground simulator results and are compared with existing flying qualities criteria.

Corliss, L. D.↗

Wind tunnel determination of dynamic cross-coupling derivatives - A new approach

The latest developments in the NAE ongoing dynamic stability research program are briefly summarized. Emphasis is placed on the recently developed wind-tunnel data reduction procedures used to obtain cross and cross-coupling derivatives due to an oscillatory motion. These procedures, which account for the dynamic behaviour of the model-balance subsystem, are described for the balance configurations currently in use. The principles on which they are based, however, are quite general and can therefore be applied to other balance configurations. Two full-model dynamic stability apparatuses are described and typical results, obtained from dynamic calibrations as well as from wind-tunnel experiments, are presented.

Hanff, E. S.↗

The effective intensity of Coriolis, cross-coupling stimulation is gravitoinertial force dependent - Implications for space motion sickness

The effect of gravity on the severity of the Coriolis-induced motion sickness was investigated in ten individuals subjected to high and low G-force phases of parabolic flight maneuvers using constant level Coriolis, cross-coupled angular acceleration stimulation. Using seven levels of severity in the diagnosis of motion sickness, it was found that the subjects were less susceptible at 0 G than at +2 Gz, and that the perceived intensity and provocativeness of Coriolis stimulation decreased in 0 G and increased in +2 Gz relative to the +1 Gz baseline values. The changes in the apparent intensity of Coriolis stimulation occur virtually immediately when the background gravitatioinertial force level is varied. These findings explain why the Skylab astronauts were refractory to motion sickness during Coriolis stimulation in-flight.

Lackner, J. R.↗

Characteristics pertaining to a stiffness cross-coupled Jeffcott model

Rotordynamic studies of complex systems utilizing multiple degree-of-freedom analysis have been performed to understand response, loads, and stability. In order to understand the fundamental nature of rotordynamic response, the Jeffcott rotor model has received wide attention. The purpose of this paper is to provide a generic rotordynamic analysis of a stiffness cross-coupled Jeffcott rotor model to illustrate characteristics of a second order stiffness-coupled linear system. The particular characteristics investigated were forced response, force vector diagrams, response orbits, and stability. Numerical results were achieved through a fourth order Runge-Kutta method for solving differential equations and the Routh Hurwitz stability criterion. The numerical results were verified to an exact mathematical solution for the steady state response.

Spanyer, K. L.↗