Search NASA⌕ Search

SEARCH · Search NASA

Results for “CSU”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

CSU FIRE 2 cirrus field experiment: Description of field deployment phase

The Colorado State University (CSU) surface observing systems are described. These systems were deployed at the Parsons, Kansas site during the FIRE 2 Cirrus Special Observing Period (SOP) from 13 Nov. - 7 Dec. 1991. The geographical coordinates of the site containing most of the CSU instrumentation are 37 deg. 18 min N. latitude and 96 deg. 30 min. W. longitude; site elevation was 269 meters. In addition, one surface meteorological and broadband flux observing site was maintained at the Tri City Airport which is approximately 18 miles due west of Parsons (37 deg. 20 min. N. latitude, 95 deg. 30 min. 30 sec. W. longitude). A map of the locations of the CSU deployment sites is presented. At the main Parsons site, the instrumentation was located directly adjacent to and north of a lake. Under most cirrus observing conditions, when the wing had a significant southernly component, the lake was upwind of the observing site. The measurements and observations collected during the experiment are listed. These measurements may be grouped into five categories: surface meteorology; infrared spectral and broadband measurements; solar spectral and broadband measurements; upper air measurements; and cloud measurements. A summary of observations collected at the Parsons site during the SOP are presented. The wind profiler, laser ceilometer, surface meteorology and surface broadband radiation instrumentation were operated on a continuous basis. All other systems were operated on an 'on demand' basis when cloud conditions merited the collection of data.

Cox, S.↗
DOE OSTI2020

Materials Data on CsU(PO4)2 by Materials Project

CsU(PO4)2 crystallizes in the monoclinic P2_1/m space group. The structure is two-dimensional and consists of one CsU(PO4)2 sheet oriented in the (1, 0, 0) direction. Cs1+ is bonded in a 1-coordinate geometry to one O2- atom. The Cs–O bond length is 2.95 Å. U5+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of U–O bond distances ranging from 2.15–2.47 Å. There are two inequivalent P5+ sites. In the first P5+ site, P5+ is bonded in a tetrahedral geometry to four O2- atoms. There is two shorter (1.54 Å) and two longer (1.57 Å) P–O bond length. In the second P5+ site, P5+ is bonded in a tetrahedral geometry to four O2- atoms. There are a spread of P–O bond distances ranging from 1.49–1.58 Å. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to one U5+ and one P5+ atom. In the second O2- site, O2- is bonded in a distorted single-bond geometry to one U5+ and one P5+ atom. In the third O2- site, O2- is bonded in a distorted single-bond geometry to one Cs1+ and one P5+ atom. In the fourth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one U5+ and one P5+ atom. In the fifth O2- site, O2- is bonded in a linear geometry to one U5+ and one P5+ atom. In the sixth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one U5+ and one P5+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2021

GUC CSU X-Band Precipitation Extracted Radar Columns and In-Situ Sensors (RadCLss)

For the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, a scanning X-Band dual-polarimetric radar provided by Colorado State University (CSU) was deployed to estimate precipitation within the Upper Colorado River Basin. In order to evaluate precipitation estimates from the CSU X-Band Radar (XPRECIPRADAR), radar columns are extracted above field sites of interest to the SAIL campaign. These radar columns are then matched to in-situ sensors at these locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

GUC CSU X-Band Precipitation Radar Surface QUantitatIve pRecipitation Estimation (SQUIRE)

For the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, a scanning X-Band dual-polarimetric radar provided by Colorado State University (CSU) was deployed to estimate precipitation within the Upper Colorado River Basin. In order to evaluate precipitation estimates from the CSU X-Band Radar (XPRECIPRADAR), Surface QUantitatIve pRecipitation Estimation (SQUIRE) was created to provide the SAIL community with a gridded dataset of precipitation estimates for comparison with hydrology and atmospheric models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Ice nucleating particle concentrations measured by the CSU-CFDC during the AGINSGP field experiment

Real-time, immersion mode ambient ice nucleating particle (INP) concentrations were measured at ARM&rsquo;s Southern Great Plains (SGP) site during the AGINSGP field experiment using a continuous flow diffusion chamber (CFDC) from Colorado State University (CSU). The CSU-CFDC is an ice-thermal gradient diffusion chamber that optically detects the freezing of single aerosol particles (Rogers 1988; Rogers et al. 2001; and Eidhammer et al. 2010). The instrument was located in the guest instrument facility (GIF) and measured INP concentrations from April 8th to April 29th. Air was drawn into the GIF through custom aluminum stack inlets (6&rdquo; inner diameter) attached vertically to the outer GIF wall and the GIF outside platform. A blower pulled air through the stacks at a velocity of 1 m/s. Aerosol instruments subsampled via wall ports, through either 3/8&rdquo; or 1/4" copper lines, depending on sample flow of the instrument. Rogers, D. C., Development of a continuous flow thermal gradient diffusion chamber for ice nucleation studies, Atmospheric Research, 22(2), 149-181, doi:10.1016/0169-8095(88)90005-1, 1988. Rogers, D. C., P. J. DeMott, S. M. Kreidenweis and Y. Chen, A continuous flow diffusion chamber for airborne measurements of ice nuclei, J. Atmos. Oceanic Technol., 18, 725-741, doi:10.1175/1520-0426(2001)018<0725:ACFDCF>2.0.CO;2, 2001. Eidhammer, T., DeMott, P. J., Prenni, A. J., Petters, M. D., Twohy, C. H., Rogers, D. C., Stith, J., Heymsfield, A., Wang, Z., Haimov, S., French, J., Pratt, K., Prather, K., Murphy, S., Seinfeld, J., Subramanian, R., and Kreidenweis, S. M., Ice initiation by aerosol particles: Measured and predicted ice nuclei concentrations versus measured ice crystal concentrations in an orographic wave cloud, J. Atmos. Sci., 67, 2417-2436, doi:10.1175/2010JAS3266.1, 2010

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Ka-band propagation studies using the ACTS propagation terminal and the CSU-CHILL multiparameter, Doppler radar

An increase in the demand for satellite communications has led to an overcrowding of the current spectrums being used - mainly at C and Ku bands. To alleviate this overcrowding, new technology is being developed to open up the Ka-band for communications use. One of the first experimental communications satellites using this technology is NASA's Advanced Communications Technology Satellite (ACTS). In Sept. 1993, ACTS was deployed into a geostationary orbit near 100 deg W longitude. The ACTS system employs two Ka-band beacons for propagation experiments, one at 20.185 GHz and another at 27.505 GHz. Attenuation due to rain and tropospheric scintillations will adversely affect new technologies proposed for this spectrum. Therefore, before being used commercially, propagation effects at Ka-band must be studied. Colorado State University is one of eight sites across the United States and Canada conducting propagations studies; each site is equipped with the ACTS propagation terminal (APT). With each site located in a different climatic zone, the main objective of the propagation experiment is to obtain monthly and yearly attenuation statistics. Each site also has secondary objectives that are site dependent. At CSU, the CSU-CHILL radar facility is being used to obtain polarimetric radar data along the ACTS propagation path. During the expected two to four year period of the project, it is hoped to study several significant weather events. The S-band radar will be used to obtain Ka-band attenuation estimates and to initialize propagation models that have been developed, to help classify propagation events measured by the APT. Preliminary attenuation estimates for two attenuation events will be shown here - a bright band case that occurred on 13 May 1994 and a convective case that occurred on 20 Jun. 1994. The computations used to obtain Ka-band attenuation estimates from S-band radar data are detailed. Results from the two events are shown.

Beaver, J.↗
DOE OSTI2020

Materials Data on CsU(SeO4)2 by Materials Project

CsU(SeO4)2 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. Cs1+ is bonded in a 10-coordinate geometry to ten O2- atoms. There are a spread of Cs–O bond distances ranging from 3.17–3.64 Å. U5+ is bonded in a distorted pentagonal bipyramidal geometry to seven O2- atoms. There are a spread of U–O bond distances ranging from 1.82–2.50 Å. There are two inequivalent Se5+ sites. In the first Se5+ site, Se5+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There is one shorter (1.67 Å) and two longer (1.71 Å) Se–O bond length. In the second Se5+ site, Se5+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There are a spread of Se–O bond distances ranging from 1.72–1.75 Å. There are eight inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Cs1+, one U5+, and one Se5+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to one Cs1+, one U5+, and one Se5+ atom. In the third O2- site, O2- is bonded in a 2-coordinate geometry to one Cs1+, one U5+, and one Se5+ atom. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to two equivalent Cs1+ and one Se5+ atom. In the fifth O2- site, O2- is bonded in a single-bond geometry to one Cs1+ and one U5+ atom. In the sixth O2- site, O2- is bonded in a single-bond geometry to two equivalent Cs1+ and one U5+ atom. In the seventh O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Cs1+, one U5+, and one Se5+ atom. In the eighth O2- site, O2- is bonded in a 1-coordinate geometry to one Cs1+, one U5+, and one Se5+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CsU(OF)3 by Materials Project

CsU(OF)3 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. Cs is bonded in a 8-coordinate geometry to four O and four F atoms. There are a spread of Cs–O bond distances ranging from 3.18–3.47 Å. There are a spread of Cs–F bond distances ranging from 3.02–3.25 Å. U is bonded to three O and four F atoms to form distorted edge-sharing UO3F4 pentagonal bipyramids. There are two shorter (1.83 Å) and one longer (2.41 Å) U–O bond lengths. There are a spread of U–F bond distances ranging from 2.17–2.37 Å. There are three inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to two equivalent Cs and one U atom. In the second O site, O is bonded in a distorted single-bond geometry to one Cs and one U atom. In the third O site, O is bonded in a distorted water-like geometry to one Cs and one U atom. There are three inequivalent F sites. In the first F site, F is bonded in a bent 120 degrees geometry to two equivalent U atoms. In the second F site, F is bonded in a distorted trigonal non-coplanar geometry to two equivalent Cs and one U atom. In the third F site, F is bonded in a distorted trigonal non-coplanar geometry to two equivalent Cs and one U atom.

36 MATERIALS SCIENCE↗
DOE OSTI2024

JISEA-CSU Sustainable Agriculture Workshop [Slides]

The JISEA-CSU Sustainable Agriculture Workshop was co-hosted by the National Renewable Energy Laboratory's Joint Institute for Strategic Energy Analysis Sustainable Agriculture Catalyzer and the Colorado State University Ag Innovation Center, and sponsored by the Colorado-Wyoming Climate Resilience Engine. The workshop brought together researchers, agricultural producers, technology innovators, investors, and policymakers to examine the past, present, and future of the U.S. agriculture and energy strategy. The workshop will feature presentations, panels, and interactive activities that dive into the successes and challenges of the industry to help inform the direction of future research efforts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

GUC CSU X-Band Precipitation Radar Plan Position Indicator data processed with Corrected Moments in Antenna Coordinates

For the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, Corrected Moments in Antenna Coordinates (CMAC) is a set of algorithms and code that does corrections to CSU X-Precipitation Radar PPI data. Additionally, CMAC adds calculations of derived snowfall rates to the original data in order to provide precipitation estimates for the campaign.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

A Suite of High-Resolution Atmospheric Carbon Dioxide Simulations in Support of the OCO-3 Snapshot Area Mapping (SAM) Mode Observation: PSU-WRF, CSU-OLAM and NASA GEOS

Cities and power plants are responsible more than 70% of GHG emissions. The emissions from the subnational localized sources need to be accurately quantified and properly managed in order to achieve the Paris Climate Agreement goals. The accurate estimation of these emission is also crucial for assessing the capacity of natural sinks to uptake the carbon released into the atmosphere that ultimately defines our emission allowance for the 1.5 or 2.0 degree temperature goals. New data collected by the Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Mapping (SAM) observations should provide a tremendous new opportunity for us to study CO2 emissions from targeted large localized sources, such as cities, power plants and beyond. Since 2018 (prior to the OCO-3 launch), we have studied the observational strategies for the SAM mode observation in order to collect the useful data for estimating CO2 emissions from target sources. To maximize the benefit of the SAM mode observation data for quantifying CO2 emission, it is important to define how to observe the localized sources depending on the local environmental and emission specificities. We employ a suite of state-of-the-art CO2 modeling systems, such as PSU's WRF-CO2, CSU's OLAM and NASA's GEOS models. All of these CO2 modeling systems are prescribedwith the high-resolution fuel CO2 emission estimates from the ODIAC data product to achieve realistic urban CO2 variations. We focus on cities with established ground-based observation networks, such as Los Angeles, Indianapolis, and Paris. We have examined the urban emission signal detectability in response to the influence of local background conditions that can observed by the SAM and biospheric contributions that will be a new challenge for urban emission inverse estimation. Based on the results of our simulation experiments, we plan to propose city-specific observation strategies. Upon the availability of the OCO-3 data, we will attempt to estimate city emissions using inverse models. We also developed synthetic OCO-3 data using NASA's GEOS5 model, which should be useful to assess the utility of the OCO-3 data in combination with data collected by carbon satellites in other orbits, such as NASA's OCO-2 and Japanese GOSAT-1/2. The synthetic data also provide an opportunity to study the errors due to clouds and aerosols, which have been not fully studied in the past.

Oda, Tomohiro↗
DOE OSTI2024

Colorado State University (CSU) X-Band Precipitation Radar Plan Position Indicator Data Processed with Corrected Moments in Antenna Coordinates (CMAC) Value-Added Product Report

In 2010 the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility procured 3- and 5-cm wavelength radars for documenting the macrophysical, microphysical, and dynamical structure of precipitating systems. To maximize the scientific impact, ARM supported the development of an application chain to correct for various phenomena in order to retrieve the “point” values of moments of the radar spectrum and polarimetric measurements. We have now used the lessons learned from the processing of the 3- and 5-cm wavelength radars obtained by ARM to help process X-band radar data from the Surface Atmospheric Integrated Field Laboratory (SAIL) field campaign. This report details the motivation, science, and progress to date as well as charting a path forward.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

ACTS propagation experiment discussion: Ka-band propagation measurements using the ACTS propagation terminal and the CSU-CHILL and Space Communications Technology Center Florida propagation program

Papers on Ka-band propagation measurements using the ACTS propagation terminal and the Colorado State University CHILL multiparameter radar and on Space Communications Technology Center Florida Propagation Program are discussed. Topics covered include: microwave radiative transfer and propagation models; NASA propagation terminal status; ACTS channel characteristics; FAU receive only terminal; FAU terminal status; and propagation testbed.

Bringi, V. N.↗
NASA NTRS1996

Ka-Band Propagation Studies using the ACTS Propagation Terminal and the CSU-CHILL Multiparameter Radar

One of the first experimental communications satellites using Ka-band technology is the NASA Advanced Communications Technology Satellite (ACTS). In September 1993, ACTS was deployed into a geostationary orbit near 100 degrees W longitude by the space shuttle Discovery. The ACTS system supports both communication and propagation experiments at the 20/30 GHz frequency bands. The propagation experiment involves multi-year attenuation measurements along the satellite-Earth slant path.

Bringi, V. N.↗
NASA NTRS1997

Numerical Simulation of the 9-10 June 1972 Black Hills Storm Using CSU RAMS

Strong easterly flow of low-level moist air over the eastern slopes of the Black Hills on 9-10 June 1972 generated a storm system that produced a flash flood, devastating the area. Based on observations from this storm event, and also from the similar Big Thompson 1976 storm event, conceptual models have been developed to explain the unusually high precipitation efficiency. In this study, the Black Hills storm is simulated using the Colorado State University Regional Atmospheric Modeling System. Simulations with homogeneous and inhomogeneous initializations and different grid structures are presented. The conceptual models of storm structure proposed by previous studies are examined in light of the present simulations. Both homogeneous and inhomogeneous initialization results capture the intense nature of the storm, but the inhomogeneous simulation produced a precipitation pattern closer to the observed pattern. The simulations point to stationary tilted updrafts, with precipitation falling out to the rear as the preferred storm structure. Experiments with different grid structures point to the importance of removing the lateral boundaries far from the region of activity. Overall, simulation performance in capturing the observed behavior of the storm system was enhanced by use of inhomogeneous initialization.

Nair, U. S.↗
DOE OSTI2023

Development of coal-derived carbon-based structural unit as a potential new building material

Coal combustion for energy has not only wasted the hydrogen-rich volatile matters but also results in CO 2 emission causing serious environmental issues. An integrated coal pyrolysis and solvent extraction process under elevated temperatures in an inert atmosphere is implemented to convert as-mined coal from Wyoming Powder River Basin to functional carbon elements such as pyrolysis char (PC). This paper presents the development and fabrication of new carbon-based structural unit (CSU) using pulverized PC and two coal-derived pitches (mesophase pitch and tar pitch) to attain high compressive strength greater than 30 MPa, low thermal conductivity less than 0.30 W/m.K, and low density less than 1.25 g/cm 3 . CSUs have the potential to overcome the current challenges with cement and concrete through pressurized fabrication followed by carbonization. This study aims to develop CSU with nearly 100% coal-derived carbon material for structural application in buildings. The effects of pressing pressures, carbonization temperatures, and binder contents on the density and mechanical and thermal properties of CSU samples are investigated. The study concludes that mesophase pitch produces a better performance of CSU samples, a combination of 100 MPa pressing pressure and carbonization temperature of 900 ⁰C yields the highest compressive strength, and a 25% MP content is recommended for low-cost CSU fabrication. Furthermoer, CSU has a much lower density, lower thermal conductivity, higher compressive strength, and higher strength-to-density ratio than normal concrete.

36 MATERIALS SCIENCE↗