Search NASA⌕ Search

SEARCH · Search NASA

Results for “CURIUM 240”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 240

Evaluated experimental data for radioactive decays and reactions for known nuclides (U, Np, Pu, Am, Cm, Bk, Cf) of A = 240 are presented together with adopted values for level energies, {gamma}-ray energies, relative branching ratios and other nuclear properties. This revision was primarily motivated by the need for re-evaluation of absolute gamma-ray intensities from the {epsilon} decay of {sup 240}Am to {sup 240}Pu. These quantities are essential for determining precise and accurate cross-sections for the {sup 241}Am(n,2n){sup 240}Am reaction using fast neutrons (see e.g. Americium Workshop, Santa Fe, New Mexico, September 2007, 2008To06, 2007Ta01, 2006Pe14) and {sup 241}Am({gamma},n) reaction (see e.g. 2006Ri08). For {sup 240}U, the {gamma}-ray data have now become available. The data sets for {sup 244}Pu {alpha} decay to {sup 240}U; {sup 244}Cm {alpha} decay to {sup 240}Pu and {sup 244}Cf {alpha} decay to {sup 240}Cm have been adapted from evaluations by 1998Ak04 and 2003Ak04. For {sup 244}Cm decay, evaluation by 2006BeZL under the Decay Data Evaluation Project (DDEP) is also used. The {gamma}-ray data (energies and intensities) for {sup 240}Cm decay are not considered (by the evaluators) as well established. Most detailed data are available only for {sup 240}Pu. Extensive data in the second potential well are available for this nuclide together with fission isomers and several superdeformed (SD) structures. For other nuclides spectroscopic data are rather sparse in the literature; especially for the following radioactive decays: The {epsilon} decays of {sup 240}Cf, {sup 240}Bk and {sup 240}Cm; multipolarities of {gamma}-ray transitions in {sup 240}Np from {sup 240}U {beta}{sup -} decay; {gamma}-ray transitions from {sup 244}Cf {alpha} decay and %{epsilon} branch of {sup 244}Cf decay; spins and parities of excited states in {sup 240}U and multipolarities of associated {gamma}-ray transitions in {sup 240}U. This work supersedes earlier full evaluations of A = 240 published by 2004Ch64, 1984Sh34, 1977Sc13, 1970Sc39; and an evaluation published in update mode by 1990Sh04.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dissolution of Light Curium Oxide with a Catalyzed Electrolytic Process

The ability to produce transcurium elements and isotopes, such as 249 Bk and 252 Cf, requires the appropriate feed material and a high thermal neutron flux. Currently, at Oak Ridge National Laboratory (ORNL), the High Flux Isotope Reactor (HFIR) provides one of the world’s highest steady state thermal neutron fluxes. The feed material consists of recycled curium from the decades of production of 249 Bk, 252 Cf, 253 Es, and 255/257 Fm at the Radiochemical Engineering Development Center (REDC). Over time, the feed material has been depleted and needs to be replenished. The current feed material is called “heavy recycled curium” and consists of over 50 wt% of 246/248 Cm isotopes. In order to replenish this stock material, additional curium is needed. The only curium material that is currently available consists predominantly (greater than 80 wt%) of 244 Cm. This material also contains 240 Pu from the radioactive decay of the 244 Cm. Because of the amount of 244 Cm is greater than 50% of the total Cm, this material is termed “light curium.” Today, 249 Bk and 252 Cf are produced in only two places in the world: the United States and Russia. In the United States, the US Department of Energy and its predecessors have made these isotopes and others available to research agencies and commercial users since the late 1960s as part of the Department of Energy heavy-element production program located at ORNL. Currently these materials are provided through the DOE Office of Science Nuclear Physics-Isotope Development and Production for Research and Applications and the Basic Energy Science-Heavy Element Chemistry. Feedstock for the production of 252 Cf and other transcurium element by-product isotopes was originally prepared by means of irradiation of multi-kilograms of 239 Pu in the large production reactors at the Savannah River Site. Products of the Savannah River Site irradiation were predominantly 242 Pu, 243 Am, and 244 Cm. These materials were shipped to ORNL for production of multi-milligram amounts per year of 252 Cf and other transcurium element isotopes by means of irradiation in the HFIR, followed by separation and purification processing in the Radiochemical Engineering Development Center (REDC). The transcurium element isotopes produced were distributed to other US and collaborating foreign laboratories for research studies to determine the nuclear and chemical properties of these rare materials. The Cm feed material plays a key role in the efficient production of 252 Cf. The early targets irradiated in HFIR contained only the 242 Pu, 243 Am, and 244 Cm produced at Savannah River Site, and the rate of production of 252 Cf was less than 1 mg per 8 g of target material as shown in Figure 1. Also, shown in Figure 1 is the significant difference in 252 Cf production between the light and heavy curium; it differs by approximately 2 orders of magnitude.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Formation of Superheavy Elements: Study Based on Dynamical Approach

Using multi-dimensional Langevin equations for the probability distribution of the distance between the surfaces of two approaching nuclei, we have studied the formation of superheavy elements via calculation of evaporation and fission cross sections of these elements. Evaporation residue cross sections have been calculated for the 1n, 2n, 3n, 4n, and 5n evaporation channels using one and four dimensional Langevin equations for the {sup 48}Ca+{sup 226}Ra, {sup 232}Th, {sup 238}U, {sup 237}Np, {sup 239,240,242,244}Pu, {sup 243}Am, {sup 245,248}Cm, {sup 249}Bk, and {sup 249}Cf reactions. Our results show that with increasing dimension of Langevin equations the evaporation residue cross section is increased. Also, obtained results based on fourdimensional Langevin are in better agreement with experimental data in comparison with one-dimensional model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Atalante research facility new mass limits in a unit containing plutonium and minor actinides - 14402

ATALANTE, located in Marcoule, is one of the main Nuclear Facilities of the French Alternative Energies and Atomic Energy Commission (CEA). This facility is mainly dedicated to research and development for nuclear energy related to the back end of the fuel cycle: spent fuel and final waste management. It is a large research complex housing chemistry and analytical laboratories and shielded cells (240 glove boxes and 11 shielded cells), equipped for basic studies through to demonstration experiments. Within the facility, one unit can contain plutonium and curium at the same time. In this case, nuclear criticality safety is achieved by exercising control over mass. A subcritical mass limit is defined for plutonium (280 g for {sup 239}Pu) and an exemption mass limit (3 g for {sup 245}Cm) is used for the actinide. In order to increase the maximum mass (in particular {sup 245}Cm) which can be handled in the unit, new mass control limits were studied, based on control over the sum of the mass ratio to the upper subcritical mass, noted m{sub lim}, for each nuclide (350 g for {sup 239}Pu; 34.8 g or 23 g for {sup 245}Cm) as shown in equation (1) below. m({sup 239}Pu)/ m{sub lim}({sup 239}Pu)+ m({sup 245}Cm)/m{sub lim}({sup 245}Cm)≤1 (1) To validate this criticality safety control method, a study was conducted to demonstrate that, for different masses of {sup 239}Pu and {sup 245}Cm meeting equation (1), the calculated effective multiplication factor is always lower than the effective multiplication factor corresponding to a sphere of 350 g of pure {sup 239}Pu, moderated, with 20 cm water reflection. The two pseudo fissile media are: - metallic plutonium (100% {sup 239}Pu, density 19.86), moderated with water, - metallic curium (100% {sup 245}Cm, density 13.566), moderated with water. The calculation model is a sphere of {sup 245}Cm metal positioned in a sphere of {sup 239}Pu metal, with optimum moderation for each fissile material, and a full water reflection (20 cm). The results show that, under certain conditions, the effective multiplication factor of the mixture can be higher than the effective multiplication factor of each pure fissile material when using the upper subcritical mass of 34.8 g for {sup 245}Cm. When using 23 g of {sup 245}Cm, the k{sub eff} of the mixture is always lower than the k{sub eff} of pure {sup 239}Pu. These calculations enable the safety documentation to be changed by introducing a new process operational procedure, based on equation (1). This change in procedure allows the operator to work with a larger quantity of curium in the unit. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutron capture by fissile and fertile actinide targets

For fissile actinide targets {sup 233}U, {sup 235}U and {sup 239}Pu the capture cross sections are strongly influenced by the target spin, fission transition states spectroscopy and fission/{gamma}-emission competition of the compound nuclides. The capture cross sections were obtained via a consistent description of fission and elastic/inelastic scattering, (n,{gamma}f) reaction being included.For neutron capture reactions on even-even U, Pu and Cm nuclei the methods, proven in case of {sup 232}Th(n,{gamma}) and {sup 238}U(n,{gamma}) data analysis are used. Calculated {sup 240}Pu(n,{gamma}) and {sup 244}Cm(n,{gamma}) reaction cross sections shapes are much similar to that, observed for the {sup 238}U(n,{gamma}) and {sup 232}Th(n,{gamma}) reactions. Differences are due to fission and neutron emission competition, which depends on the (Z,N)-composition of the compound nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The use of non-destructive passive neutron measurement methods in dismantling and radioactive waste characterization

The cleaning up and dismantling of nuclear facilities lead to a great volume of technological radioactive wastes which need to be characterized in order to be sent to the adequate final disposal or interim storage. The control and characterization can be performed with non-destructive nuclear measurements such as gamma-ray spectrometry. Passive neutron counting is an alternative when the alpha-gamma emitters cannot be detected due to the presence of a high gamma emission resulting from fission or activation products, or when the waste matrix is too absorbing for the gamma rays of interest (too dense and/or made of high atomic number elements). It can also be a complement to gamma-ray spectrometry when two measurement results must be confronted to improve the confidence in the activity assessment. Passive neutron assays involve the detection of spontaneous fission neutrons emitted by even nuclides ({sup 238}Pu, {sup 240}Pu, {sup 242}Pu, {sup 242}Cm, {sup 244}Cm...) and neutrons resulting from ({alpha}, n) reactions with light nuclides (O, F, Be...). The latter is conditioned by the presence of high {alpha}-activity radionuclides ({sup 234}U, {sup 238}Pu, {sup 240}Pu, {sup 241}Am...) and low-Z elements, which depends on the chemical form (metallic, oxide or fluorine) of the plutonium or uranium contaminant. This paper presents the recent application of passive neutron methods to the cleaning up of a nuclear facility located at CEA Cadarache (France), which concerns the Pu mass assessment of 2714 historic, 100 litre radioactive waste drums produced between 1980 and 1997. Another application is the dismantling and decommissioning of an uranium enrichment facility for military purposes, which involves the {sup 235}U and total uranium quantifications in about a thousand, large compressors employed in the gaseous diffusion enrichment process. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Implications of Plutonium isotopic separation on closed fuel cycles and repository design

Advances in laser enrichment may enable relatively low-cost plutonium isotopic separation. This would have large impacts on LWR closed fuel cycles and waste management. If Pu-240 is removed before recycling plutonium as mixed oxide (MOX) fuel, it would dramatically reduce the buildup of higher plutonium isotopes, Americium, and Curium. Pu-240 is a fertile material and thus can be replaced by U-238. Eliminating the higher plutonium isotopes in MOX fuel increases the Doppler feedback, simplifies reactor control, and allows infinite recycle of MOX plutonium in LWRs. Eliminating fertile Pu-240 and Pu-242 reduces the plutonium content in MOX fuel and simplifies fabrication. Reducing production of Pu-241 reduces production of Am-241 - the primary heat generator in spent nuclear fuels after several decades. Reducing heat generating Am-241 would reduce repository cost and waste toxicity. Avoiding Am- 241 avoids its decay product Np-237, a nuclide that partly controls long-term oxidizing repository performance. Most of these benefits also apply to LWR plutonium recycled into fast reactors. There are benefits for plutonium isotopic separation in fast reactor fuel cycles (particularly removal of Pu-242) but the benefits are less. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

MANTRA: An Integral Reactor Physics Experiment to Infer Actinide Capture Cross-sections from Thorium to Californium with Accelerator Mass Spectrometry

The principle of the proposed experiment is to irradiate very pure actinide samples in the Advanced Test Reactor at INL and, after a given time, determine the amount of the different transmutation products. The determination of the nuclide densities before and after neutron irradiation will allow inference of effective neutron capture cross-sections. This approach has been used in the past and the novelty of this experiment is that the atom densities of the different transmutation products will be determined using the Accelerator Mass Spectrometry technique at the ATLAS facility located at ANL. It is currently planned to irradiate the following isotopes: 232Th, 235U, 236U, 238U, 237Np, 238Pu, 239Pu, 240Pu, 241Pu, 242Pu, 241Am, 243Am, 244Cm and 248Cm.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MA Doping Analysis on Breeding Capability and Protected Plutonium Production of Large FBR

Spent fuel from LWR can be seen as long-live waste if it is not recycled or as a 'new fuel' resource if it is recycled into the reactors. Uranium and plutonium have been used for 'new fuel' resources from LWR spent fuel as MOX fuel type which is loaded into thermal reactor or fast reactor types. Other actinides from the spent fuel such as neptunium, americium and curium as minor actinide (MA) are considered to be loaded into the reactors for specific purposes, recently. Those purposes such as for increasing protected plutonium production and breeding capability for protected plutonium as well as in the same time those amount of MA can be reduced to a small quantity as a burner or transmutation purpose. Some investigations and scientific approaches are performed in order to increase a material ''barrier'' in plutonium isotope composition by increasing the even mass number of plutonium isotope such as Pu-238, Pu-240 and Pu-242 as plutonium protected composition. Higher material barrier which related to intrinsic properties of plutonium isotopes with even mass number (Pu-238, Pu-240 and Pu-242), are recognized because of their intense decay heat (DH) and high spontaneous fission neutron (SFN) rates. Those even number mass of plutonium isotope contribute to some criteria of plutonium characterization which will be adopted for present study such as IAEA, Pellaud and Kessler criteria (IAEA, 1972; Pellaud, 2002; and Kessler, 2007). The present paper intends to evaluate the breeding capability as a fuel sustainability index of the reactors and to analyze the composition of protected plutonium production of large power reactor based on the FaCT FBR as reference (Ohki, et al., 2008). Three dimensional FBR core configuration has been adopted which is based on the core optimization calculation of SRAC-CITATION code as reactor core analysis and JENDL-3.3 is adopted for nuclear data library. Some MA doping materials are loaded into the blanket regions which can be considered as breeding region for protected plutonium production. Breeding capability of the reactor can be increased effectively by increasing MA doping rate while criticality condition of the reactor is reduced by doping MA. Adopting MA cycle is also effective to increase the isotopic Pu-238 production in plutonium vector composition for denaturing purpose of plutonium.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis on fuel breeding capability of FBR core region based on minor actinide recycling doping

Nuclear fuel breeding based on the capability of fuel conversion capability can be achieved by conversion ratio of some fertile materials into fissile materials during nuclear reaction processes such as main fissile materials of U-233, U-235, Pu-239 and Pu-241 and for fertile materials of Th-232, U-238, and Pu-240 as well as Pu-238. Minor actinide (MA) loading option which consists of neptunium, americium and curium will gives some additional contribution from converted MA into plutonium such as conversion Np-237 into Pu-238 and it's produced Pu-238 converts to Pu-239 via neutron capture. Increasing composition of Pu-238 can be used to produce fissile material of Pu-239 as additional contribution. Trans-uranium (TRU) fuel (Mixed fuel loading of MOX (U-Pu) and MA composition) and mixed oxide (MOX) fuel compositions are analyzed for comparative analysis in order to show the effect of MA to the plutonium productions in core in term of reactor criticality condition and fuel breeding capability. In the present study, neptunium (Np) nuclide is used as a representative of MAin trans-uranium (TRU) fuel composition as Np-MOX fuel type. It was loaded into the core region gives significant contribution to reduce the excess reactivity in comparing to mixed oxide (MOX) fuel and in the same time it contributes to increase nuclear fuel breeding capability of the reactor. Neptunium fuel loading scheme in FBR core region gives significant production of Pu-238 as fertile material to absorp neutrons for reducing excess reactivity and additional contribution for fuel breeding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗