Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ca5(PO4)3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Ca5(PO4)3 by Materials Project

Ca5(PO4)3 crystallizes in the hexagonal P6_3/m space group. The structure is three-dimensional. there are two inequivalent Ca2+ sites. In the first Ca2+ site, Ca2+ is bonded in a 9-coordinate geometry to nine O2- atoms. There are a spread of Ca–O bond distances ranging from 2.43–2.84 Å. In the second Ca2+ site, Ca2+ is bonded to six O2- atoms to form distorted CaO6 pentagonal pyramids that share corners with four equivalent CaO6 pentagonal pyramids, corners with four equivalent PO4 tetrahedra, and an edgeedge with one PO4 tetrahedra. There are a spread of Ca–O bond distances ranging from 2.35–2.77 Å. P+4.67+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with four equivalent CaO6 pentagonal pyramids and an edgeedge with one CaO6 pentagonal pyramid. There is three shorter (1.55 Å) and one longer (1.56 Å) P–O bond length. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to three Ca2+ and one P+4.67+ atom. In the second O2- site, O2- is bonded in a 4-coordinate geometry to three Ca2+ and one P+4.67+ atom. In the third O2- site, O2- is bonded in a 1-coordinate geometry to three Ca2+ and one P+4.67+ atom.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

The Oxidation State of Sulfur in Martian Apatite- Implications for Redox of Surficial Processes

Meteorites from Mars record fO2 values of ∆IW = -1 to +6.5 [1, 2]. This relatively large range in fO2 has been attributed to igneous processes like differentiation and assimilation, or sometimes to alteration [2, 3], modifying the range inherited from the Martian mantle, which is thought to be closer to the values recorded by lunar basalts (~∆IW -1 [e.g., 1]). Trace element compositions reveal that those Martian meteorites that are light Rare Earth Elements (LREE) enriched record higher fO2 values than those that are LREE-depleted [2]. Sulfur (S) has been used to track redox and alteration processes on Mars because it can be present in multiple redox states varying from S2- in magmatic sulfides to S6+ in sedimentary sulfate deposits and alteration products like jarosite [4, 5]. Apatite (Ca5(PO4)3(F,Cl,OH)) is found in many of the Martian meteorites as a late stage crystallizing mineral. It can incorporate both S^(2-) [6] or S^(6+) [7] or mixtures of both [7, 8] in its crystal structure, and it has been hypothesized that the relative proportions of S^(2-) and S^(6+) in apatite will depend on the prevailing fO2 in which it formed (along with P, T, and major element composition). Note: Extended abstract on document.

P. Chowdhury↗
NASA NTRS2016

Apatite-Melt Partitioning at 1 Bar: An Assessment of Apatite-Melt Exchange Equilibria Resulting from Non-Ideal Mixing of F and Cl in Apatite

The mineral apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials. Due to the presence of volatiles within its crystal structure (X-site), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources. In order to use the volatile contents of apatite to precisely determine the abundances of volatiles in coexisting silicate melt or fluids, thermodynamic models for the apatite solid solution and for the apatite components in multi-component silicate melts and fluids are required. Although some thermodynamic models for apatite have been developed, they are incomplete. Furthermore, no mixing model is available for all of the apatite components in silicate melts or fluids, especially for F and Cl components. Several experimental studies have investigated the apatite-melt and apatite-fluid partitioning behavior of F, Cl, and OH in terrestrial and planetary systems, which have determined that apatite-melt partitioning of volatiles are best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, McCubbin et al. recently reported that the exchange coefficients may vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite. In particular, solution calorimetry data of apatite compositions along the F-Cl join exhibit substantial excess enthalpies of mixing. In the present study, we conducted apatite-melt partitioning experiments in evacuated, sealed silica-glass tubes at approximately 1 bar and 950-1050 degrees Centigrade on a synthetic Martian basalt composition equivalent to the basaltic shergottite Queen Alexandria Range (QUE) 94201. These experiments were conducted dry, at low pressure, to assess the effects of temperature and apatite composition on the partitioning behavior of F and Cl between apatite and basaltic melt along the F-Cl apatite binary join, where there is non-ideal mixing of F and Cl in apatite.

McCubbin, F. M.↗
NASA NTRS2016

The Chlorine Isotopic Composition Of Lunar UrKREEP

Since the long standing paradigm of an anhydrous Moon was challenged there has been a renewed focus on investigating volatiles in a variety of lunar samples. Numerous studies have examined the abundances and isotopic compositions of volatiles in lunar apatite, Ca5(PO4)3(F,Cl,OH). In particular, apatite has been used as a tool for assessing the sources of H2O in the lunar interior. However, current models for the Moon's formation have yet to fully account for its thermal evolution in the presence of H2O and other volatiles. For ex-ample, in the context of the lunar magma ocean (LMO) model, it is anticipated that chlorine (and other volatiles) should have been concentrated in the late-stage LMO residual melts (i.e., the dregs enriched in incompatible elements such as K, REEs (Rare Earth Elements), and P, collectively called KREEP, and in its primitive form - urKREEP, given its incompatibility in mafic minerals like olivine and pyroxene, which were the dominant phases that crystallized early in the cumulate pile of the LMO. When compared to chondritic meteorites and terrestrial rocks, lunar samples have exotic chlorine isotope compositions, which are difficult to explain in light of the abundance and isotopic composition of other volatile species, especially H, and the current estimates for chlorine and H2O in the bulk silicate Moon (BSM). In order to better understand the processes involved in giving rise to the heavy chlorine isotope compositions of lunar samples, we have performed a comprehensive in situ high precision study of chlorine isotopes in lunar apatite from a suite of Apollo samples covering a range of geochemical characteristics and petrologic types.

Barnes, J. J.↗
NASA NTRS2017

Partitioning of F and Cl Between Apatite and a Synthetic Shergottite Liquid (QUE 94201) at 4 Gpa from 1300 TO 1500 C

Apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials. Due to the presence of volatiles within its crystal structure (Xsite), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources. In order to use the volatile contents of apatite to accurately determine the abundances of volatiles in coexisting silicate melt or fluids, thermodynamic models for the apatite solid solution and for the apatite components in multicomponent silicate melts and fluids are required. Although some thermodynamic models for apatite have been developed, they are incomplete. Furthermore, no mixing model is available for all of the apatite components in silicate melts or fluids, especially for F and Cl components. Several experimental studies have investigated the apatite-melt and apatite-fluid partitioning behavior of F, Cl, and OH in terrestrial and planetary systems, which have determined that apatite-melt partitioning of volatiles are best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, McCubbin et al., recently reported that the exchange coefficients vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite. In particular, solution calorimetry data of apatite compositions along the F-Cl join exhibit substantial excess enthalpies of mixing, and McCubbin et al. reported substantial deviations in the Cl-F exchange Kd along the F-Cl apatite join that could be explained by the preferential incorporation of F into apatite. In the present study, we assess the effect of apatite crystal chemistry on F-Cl exchange equilibria between apatite and melt at 4 GPa over the temperature range of 1300-1500 C. The goal of these experiments is to assess the variation in the Ap-melt Cl-F exchange Kd over a broad range of F:Cl ratios in apatite. The results of these experiments could be used to understand at what composition apatite shifts from a hexagonal unit cell with space group P63/m to a unit cell with monoclinic symmetry within space group P21/b. We anticipate that this transition occurs at >70% chlorapatite based on solution calorimetry data.

McCubbin, F. M.↗
NASA NTRS2017

Volatiles in High-K Lunar Basalts

Chlorine is an unusual isotopic system, being essentially unfractionated ((delta)Cl-37 approximately 0 per mille ) between bulk terrestrial samples and chondritic meteorites and yet showing large variations in lunar (approximately -4 to +81 per mille), martian, and vestan (HED) samples. Among lunar samples, the volatile-bearing mineral apatite (Ca5(PO4)3[F,Cl,OH]) has been studied for volatiles in K-, REE-, and P (KREEP), very high potassium (VHK), low-Ti and high-Ti basalts, as well as samples from the lunar highlands. These studies revealed a positive correlation between in-situ (delta)Cl-37 measurements and bulk incompatible trace elements (ITEs) and ratios. Such trends were interpreted to originate from Cl isotopic fractionation during the degassing of metal chlorides during or shortly after the differentiation of the Moon via a magma ocean. In this study, we investigate the volatile inventories of a group of samples for which new-era volatile data have yet to be reported - the high-K (greater than 2000 ppm bulk K2O), high-Ti, trace element-rich mare basalts. We used isotope imaging on the Cameca NanoSIMS 50L at JSC to obtain the Cl isotopic composition [((Cl-37/(35)Clsample/C-37l/(35)Clstandard)-1)×1000, to get a value in per thousand (per mille)] which ranges from approximately -2.7 +/- 2 per mille to +16.1 +/- 2 per mille (2sigma), as well as volatile abundances (F & Cl) of apatite in samples 10017, 10024 & 10049. Simply following prior models, as lunar rocks with high bulk-rock abundances of ITEs we might expect the high-K, high-Ti basalts to contain apatite characterized by heavily fractionated (delta)Cl-37 values, i.e., Cl obtained from mixing between unfractionated mantle Cl (approximately 0 per mille) and the urKREEP reservoir (possibly fractionated to greater than +25 per mille.). However, the data obtained for the studied samples do not conform to either the early degassing or mixing models. Existing petrogentic models for the origin of the high-K, high-Ti basalts do not include urKREEP assimilation into their LMO cumulate sources. Therefore, Cl in these basalts either originated from source region heterogeneity or through assimilation or metasomatism by volatile and incompatible trace element rich materials. The new data presented here could provide evidence for the existence of region(s) in the lunar interior that are ITE-enriched and contain Cl that does not share isotopic affinities with lunar urKREEP, possibly representing the composition of the purported 'neuKREEP'.

Barnes, Jessica J.↗
NASA NTRS2017

Apatite-Melt Partitioning of Volatiles in Basaltic Systems: Implications for Determining Volatile Abundances in Planetary Bodies from Apatite

Apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials, and due to the presence of volatiles within its crystal structure (X-site), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources [i.e., 1]. Experimental studies have investigated the apatite-melt partitioning behavior of F, Cl, and OH in basaltic systems [e.g., 2- 3], reporting that apatite-melt partitioning of volatiles is best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, exchange coefficients may vary as a function of temperature, pressure, melt composition, and/or oxygen fugacity. Furthermore, exchange coefficients may vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite [3]. In these regions of ternary space, we anticipate that crystal chemistry could influence partitioning behavior. Consequently, we conducted experiments to investigate the effect of apatite crystal chemistry on apatite-melt partitioning of F, Cl, and OH.

McCubbin, F. M.↗
NASA NTRS2017

Experimental Study into the Partitioning Behavior of Fluorine, Chlorine, Hydroxyl, and Sulfur (S2-) Between Apatite and a Synthetic Kreep Basalt Melt

The mineral apatite (Ca5 (PO4)3(F, Cl, OH)) is known for its ability to constrain the petrogenesis of the rock in which it is hosted and for its ubiquity throughout the Solar System, as it is found in lunar, martian, and terrestrial rocks alike (McCubbin et. al, 2015). The abundance of volatile elements, and for this particular study, the elevated abundance of sulfur (S2-) in high-Al basalt samples bearing apatite, could provide more insight for inquiries posed about the behavior of volatiles in lunar and martian magmatic systems (Boyce et. al, 2010). Oxygen fugacity will be an important parameter for these experiments, as the Moon, Mars, and Earth have different redox states (Herd, 2008). The objective of this experimental endeavor is to determine apatite-melt partition coefficients for the volatile elements (F-, Cl-, OH-, S2-) that make up the X-site (i.e., the typically monovalent anion site) in the mineral apatite in a lunar melt composition under lunar oxygen fugacity conditions approx.1-2 log units below the iron-wüstite buffer). All experiments will be conducted at NASA, Johnson Space Center in the High Pressure Experimental Petrology Laboratory. In order to conduct apatite-melt partition experiments with oxygen fugacity as an additional parameter, we will create a synthetic mix of the lunar KREEP basalt 15386, a sample retrieved during Apollo 15 that is believed to represent an indigenous volcanic melt derived from the lunar interior (Rhodes, J.M et. al, 2006). Other geochemically significant elements including C, Co, Ni, Mo, and rare earth elements will be included in the mix at trace abundances in order to assess their partitioning behavior without effecting the overall behavior of the system. The synthetic mix will then be loaded into a piston cylinder, an apparatus used to simulate high-pressure/high-temperature conditions of planetary interiors, and exposed to 0.5 GPa of pressure, the pressure observed in the upper mantle of the Moon, and heated to the melting temperature of the materials. To make sure crystals grow large enough for the necessary analyses, the sample will be kept at the crystallization temperature for 8 hours. This extended run time should also allow the sample to achieve a steady state which is necessary to accurately assess the partitioning of these elements between apatite and melt. The results from this experimental study will allow us to determine the fate of F-, Cl-, OH-, and S2- during the magmatic evolution of the Moon.

Turner, Amber↗
NASA NTRS2017

Experimental Study into the Stability of Whitlockite in Basaltic Magmas

Apatite Ca5(PO4)3(F,Cl,OH), merrillite Ca18Na2Mg2(PO4)14, and whitlockite Ca9(Mg,Fe2+)(PO4)6[PO3(OH)] are the primary phosphate minerals found in most planetary materials including rocks from Earth, Moon, Mars, and asteroids [1-2]. For many years, the terms merrillite and whitlockite have been used interchangeably in the meteorite literature. Much of the confusion regarding the relationship between terrestrial and extraterrestrial "whitlockite" is based on the presence or absence of hydrogen in the mineral structure. Whitlockite has approximately 8500 ppm H2O, and the term "merrillite" has been adopted to identify the hydrogen-free form of whitlockite [2]. The atomic structures of merrillite and whitlockite were examined in detail by Hughes et al. [3-4]. On Earth, whitlockite has been found in rocks from evolved pegmatitic systems [2-4] and in some mantle rocks [e.g., 5]. Furthermore, terrestrial whitlockite has been shown to have some merrillite component [4]. For the meteoritic and lunar materials that have been investigated, merrillite appears to be far more common than whitlockite, and it has been proposed that the whitlockite component is unique to terrestrial samples [4]. There are some reports of "whitlockite" in the meteorite literature; however, these likely represent misidentifications of merrillite because there have been no reports of extraterrestrial whitlockite that have been verified through crystal structural studies or analyzed for their H contents. Hughes et al. [3] reported the atomic arrangement of lunar merrillite and demonstrated that the phase is similar to meteoritic merrillite and, predictably, devoid of hydrogen. In a follow-up study, Hughes et al. [4] reported the atomic arrangements of two natural samples of whitlockite, one synthetic whitlockite, and samples of synthetic whitlockite that were heated at 500degC and 1050degC for 24 h. The crystal chemistry and crystal structures of the phases were compared, and it was discovered that the latter treatment resulted in the dehydrogenation of whitlockite to form merrillite. The presence of merrillite vs. whitlockite was widely thought to serve as an indication that magmas were anhydrous [e.g., 6-7]. However, McCubbin et al., [8] determined that merrillite in the martian meteorite Shergotty had no discernible whitlockite component despite its coexistence with OH-rich apatite. Consequently, McCubbin et al., (2014) speculated that the absence of a whitlockite component in Shergotty merrillite and other planetary merrillites may be a consequence of the limited thermal stability of H in whitlockite (stable only at T less than1050degC), which would prohibit merrillite-whitlockite solid-solution at high temperatures. In the present study, we have aimed to test this hypothesis experimentally by examining the stability of whitlockite in basaltic magmas at 1.2 GPa and a temperature range of -1000- 1300degC.

McCubbin, F. M.↗
NASA NTRS2018

Experimental Study into the Stability of Whitlockite and Hydroxylapatite in Basaltic Magmas

Apatite (Ca5(PO4)3(F,Cl,OH)), merrillite (Ca18Na2Mg2(PO4)14), and whitlockite (Ca9(Mg,Fe(2+))(PO4)6[PO3(OH)]) are the primary phosphate minerals found in most planetary materials including rocks from Earth, Moon, Mars, and asteroids. For many years, the terms merrillite and whitlockite have been used interchangeably in the meteorite literature. Much of the confusion regarding the relationship between terrestrial and extraterrestrial 'whitlockite' is based on the presence or absence of hydrogen in the mineral structure. Whitlockite has approximately 8500 ppm H2O, and the term 'merrillite' has been adopted to identify the hydrogen-free form of whitlockite. The atomic structures of merrillite and whitlockite were examined in detail by Hughes et al.. On Earth, whitlockite has been found in rocks from evolved pegmatitic systems and in some mantle rocks. Furthermore, terrestrial whitlockite has been shown to have some merrillite component. For the meteoritic and lunar materials that have been investigated, merrillite appears to be far more common than whitlockite, and it has been proposed that the whitlockite component is unique to terrestrial samples. There are some reports of 'whitlockite' in the meteorite literature; however, these may represent misidentifications of merrillite because there have been no reports of extraterrestrial whitlockite that have been verified through crystal structural studies or analyzed for their H contents. Hughes et al. reported the atomic arrangement of lunar merrillite and demonstrated that the phase is similar to meteoritic merrillite and, predictably, devoid of hydrogen. In a follow-up study, Hughes et al. reported the atomic arrangements of two natural samples of whitlockite, one synthetic whitlockite, and samples of synthetic whitlockite that were heated at 500 C or 1050 C for 24 h. The crystal chemistry and crystal structures of the phases were compared, and it was discovered that the latter treatment resulted in the dehydrogenation of whitlockite to form merrillite.

McCubbin, F. M.↗
NASA NTRS2018

Tracing the Evolution of Hydrogen in the Martian Crust Through Laboratory Studies of Apatite

Introduction: Northwest Africa (NWA) 7034 and its pairings represent a regolith breccia of basaltic bulk composition, the finegrained matrix of which bears a strong resemblance to the major and trace element composition estimated for the ancient southern highlands crust on Mars. Therefore, NWA 7034 may represent a key sample for constraining the composition of the Martian crust, particularly the ancient highlands. Here we seek to constrain the hydrogen isotopic composition of the Martian crust using apatite [Ca5 (PO4)3(Cl,F,OH)]. Apatites across all lithologic domains in NWA 7034 have been affected by a Pb-loss event at ~1.5 Ga before present and so they are unlikely to have retained magmatic volatile composition and are more likely to have equilibrated with fluids within the Martian crust that may or may not have exchanged with the Martian atmosphere.

Barnes, Jessica↗
NASA NTRS2018

Coordinated Microanalysis of Phosphates in High-Titanium Lunar Basalts

Laboratory studies of lunar apatite [Ca5(PO4)3(F,Cl,OH)] have been important for determining the volatile inventory of the interior and the roles volatiles played during the magmatic evolution of the Moon. It has been suggested that high-Ti mare basalts sample volatiles from a distinct reservoir in the lunar mantle. However, there is still debate surrounding the crystallization and post-crystallization history of apatite in those basalts. This information is required before we can use apatite to characterize the abundance or isotopic composition of volatiles in melts or magmatic source regions. Our goal is to investigate the mineral chemistry, crystal structure, and volatile inventory of phosphates in high-Ti basalts from Apollo 11, which will allow us to determine the crystallization history of apatite in these rocks and identify any potential secondary processes that have changed the volatile composition that apatite acquired from the melt.

Barnes, J. J.↗
NASA NTRSDate not supplied

Volatile Abundances of Apatite in CK and R Chondrites: Implications for Apatite Volatile Records in Oxidized and Thermally Altered Chondrite Parent Bodies

The mineral apatite [Ca5(PO4)3(F,Cl,OH)] is one of the primary mineralogical reservoirs for phosphorus on Earth, and it is a common phosphate mineral within a broad range of extraterrestrial samples. Naturally occurring apatite hosts F, Cl, and OH as essential structural constituents, and all three make up the apatite endmembers fluorapatite, chlorapatite, and hydroxylapatite, respectively. The presence of apatite in chondrite parent bodies indicates that apatite may hold a record of volatiles and their associated processes during the nascent stages of planetesimal formation and evolution.

F. M. McCubbin↗
NASA NTRS1997

Near Infrared Luminescence Properties of Mn(5+): Ca5(PO4)3F

We report a spectroscopic investigation of Mn(5+) doped Ca5(PO4)(sub 3)F or FAP. Mn(5+) doped crystals have recently attracted world wide attention for potential solid-state laser applications. Following optical excitation of Mn: FAP with the 600 nm output of a Nd: YAG OPO laser system, we observed a strong near infrared luminescence centered at around 1150 nm. The room temperature luminescence decay time was measured to be approximately 635 microseconds. We attribute the infrared luminescence to the(1)E yields (3)A2 transition of tetrahedrally coordinated Mn5+ ions located in a strong crystal field environment. Absorption, luminescence and lifetime data of Mn: FAP will be presented and discussed.

Davis, Valetta R.↗