Search NASA⌕ Search

SEARCH · Search NASA

Results for “CaSO4”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Materials Data on CaSO4 by Materials Project

CaSO4 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. Ca2+ is bonded in a 9-coordinate geometry to nine O2- atoms. There are a spread of Ca–O bond distances ranging from 2.44–2.88 Å. S6+ is bonded in a tetrahedral geometry to four O2- atoms. There are a spread of S–O bond distances ranging from 1.48–1.50 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom. In the third O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to three equivalent Ca2+ and one S6+ atom.

36 MATERIALS SCIENCE↗

Materials Data on CaSO4 by Materials Project

CaSO4 is Zircon-like structured and crystallizes in the hexagonal P6_222 space group. The structure is three-dimensional. Ca2+ is bonded to eight equivalent O2- atoms to form distorted CaO8 hexagonal bipyramids that share corners with four equivalent SO4 tetrahedra, edges with four equivalent CaO8 hexagonal bipyramids, and edges with two equivalent SO4 tetrahedra. There are four shorter (2.41 Å) and four longer (2.57 Å) Ca–O bond lengths. S6+ is bonded to four equivalent O2- atoms to form SO4 tetrahedra that share corners with four equivalent CaO8 hexagonal bipyramids and edges with two equivalent CaO8 hexagonal bipyramids. All S–O bond lengths are 1.49 Å. O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom.

36 MATERIALS SCIENCE↗

Materials Data on CaSO4 by Materials Project

CaSO4 is Zircon-like structured and crystallizes in the orthorhombic Cmcm space group. The structure is three-dimensional. Ca2+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Ca–O bond distances ranging from 2.38–2.59 Å. S6+ is bonded in a tetrahedral geometry to four O2- atoms. All S–O bond lengths are 1.49 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom.

36 MATERIALS SCIENCE↗

Materials Data on CaSO4 by Materials Project

CaSO4 is Zircon-like structured and crystallizes in the orthorhombic C222 space group. The structure is three-dimensional. there are two inequivalent Ca2+ sites. In the first Ca2+ site, Ca2+ is bonded to eight O2- atoms to form distorted CaO8 hexagonal bipyramids that share corners with four SO4 tetrahedra, edges with four CaO8 hexagonal bipyramids, and edges with two equivalent SO4 tetrahedra. There are a spread of Ca–O bond distances ranging from 2.40–2.57 Å. In the second Ca2+ site, Ca2+ is bonded to eight O2- atoms to form distorted CaO8 hexagonal bipyramids that share corners with four equivalent SO4 tetrahedra, edges with four equivalent CaO8 hexagonal bipyramids, and edges with two equivalent SO4 tetrahedra. There are four shorter (2.41 Å) and four longer (2.57 Å) Ca–O bond lengths. There are two inequivalent S6+ sites. In the first S6+ site, S6+ is bonded to four O2- atoms to form SO4 tetrahedra that share corners with four CaO8 hexagonal bipyramids and edges with two equivalent CaO8 hexagonal bipyramids. All S–O bond lengths are 1.49 Å. In the second S6+ site, S6+ is bonded to four equivalent O2- atoms to form SO4 tetrahedra that share corners with four equivalent CaO8 hexagonal bipyramids and edges with two equivalent CaO8 hexagonal bipyramids. All S–O bond lengths are 1.49 Å. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to two Ca2+ and one S6+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to two Ca2+ and one S6+ atom. In the third O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom.

36 MATERIALS SCIENCE↗

Materials Data on CaSO4 by Materials Project

CaSO4 crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. Ca2+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Ca–O bond distances ranging from 2.33–2.58 Å. S6+ is bonded in a tetrahedral geometry to four O2- atoms. There are a spread of S–O bond distances ranging from 1.47–1.50 Å. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Ca2+ and one S6+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent Ca2+ and one S6+ atom. In the third O2- site, O2- is bonded in a 1-coordinate geometry to one Ca2+ and one S6+ atom.

36 MATERIALS SCIENCE↗

DUSEL Facility Cooling Water Scaling Issues

Precipitation (crystal growth) in supersaturated solutions is governed by both kenetic and thermodynamic processes. This is an important and evolving field of research, especially for the petroleum industry. There are several types of precipitates including sulfate compounds (ie. barium sulfate) and calcium compounds (ie. calcium carbonate). The chemical makeup of the mine water has relatively large concentrations of sulfate as compared to calcium, so we may expect that sulfate type reactions. The kinetics of calcium sulfate dihydrate (CaSO4 {center_dot} 2H20, gypsum) scale formation on heat exchanger surfaces from aqueous solutions has been studied by a highly reproducible technique. It has been found that gypsum scale formation takes place directly on the surface of the heat exchanger without any bulk or spontaneous precipitation in the reaction cell. The kinetic data also indicate that the rate of scale formation is a function of surface area and the metallurgy of the heat exchanger. As we don't have detailed information about the heat exchanger, we can only infer that this will be an issue for us. Supersaturations of various compounds are affected differently by temperature, pressure and pH. Pressure has only a slight affect on the solubility, whereas temperature is a much more sensitive parameter (Figure 1). The affect of temperature is reversed for calcium carbonate and barium sulfate solubilities. As temperature increases, barium sulfate solubility concentrations increase and scaling decreases. For calcium carbonate, the scaling tendencies increase with increasing temperature. This is all relative, as the temperatures and pressures of the referenced experiments range from 122 to 356 F. Their pressures range from 200 to 4000 psi. Because the cooling water system isn't likely to see pressures above 200 psi, it's unclear if this pressure/scaling relationship will be significant or even apparent. The most common scale minerals found in the oilfield include calcium carbonates (CaCO3, mainly calcite) and alkaline-earth metal sulfates (barite BaSO4, celestite SrSO4, anhydrite CaSO4, hemihydrate CaSO4 1/2H2O, and gypsum CaSO4 2H2O or calcium sulfate). The cause of scaling can be difficult to identify in real oil and gas wells. However, pressure and temperature changes during the flow of fluids are primary reasons for the formation of carbonate scales, because the escape of CO2 and/or H2S gases out of the brine solution, as pressure is lowered, tends to elevate the pH of the brine and result in super-saturation with respect to carbonates. Concerning sulfate scales, the common cause is commingling of different sources of brines either due to breakthrough of injected incompatible waters or mixing of two different brines from different zones of the reservoir formation. A decrease in temperature tends to cause barite to precipitate, opposite of calcite. In addition, pressure drops tend to cause all scale minerals to precipitate due to the pressure dependence of the solubility product. And we can expect that there will be a pressure drop across the heat exchanger. Weather or not this will be offset by the rise in pressure remains to be seen. It's typically left to field testing to prove out. Progress has been made toward the control and treatment of the scale deposits, although most of the reaction mechanisms are still not well understood. Often the most efficient and economic treatment for scale formation is to apply threshold chemical inhibitors. Threshold scale inhibitors are like catalysts and have inhibition efficiency at very low concentrations (commonly less than a few mg/L), far below the stoichiometric concentrations of the crystal lattice ions in solution. There are many chemical classes of inhibitors and even more brands on the market. Based on the water chemistry it is anticipated that there is a high likelihood for sulfate compound precipitation and scaling. This may be dependent on the temperature and pressure, which vary throughout the system. Therefore, various types and amounts of scaling may occur at different locations. Although it has been shown that decreased pressure causes increased scaling, it is unclear if this condition will have significant affect, as all the pressures are low. Sulfate concentrations predominate, but there is still a chance for calcium carbonate buildup, especially in the heat exchanger where the temperatures are rising. Additional information is needed to conduct a thorough analysis, but it would appear that a fairly simple injection system would be sufficient to address scaling issues.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Materials Data on CaSO6 by Materials Project

CaSO4O2 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of four hydrogen peroxide molecules and two CaSO4 sheets oriented in the (0, 1, 0) direction. In each CaSO4 sheet, Ca is bonded in a 6-coordinate geometry to six O atoms. There are a spread of Ca–O bond distances ranging from 2.31–2.48 Å. S is bonded in a tetrahedral geometry to four O atoms. There is two shorter (1.48 Å) and two longer (1.51 Å) S–O bond length. There are four inequivalent O sites. In the first O site, O is bonded in a 3-coordinate geometry to two equivalent Ca and one S atom. In the second O site, O is bonded in a 3-coordinate geometry to two equivalent Ca and one S atom. In the third O site, O is bonded in a water-like geometry to one Ca and one S atom. In the fourth O site, O is bonded in a water-like geometry to one Ca and one S atom.

36 MATERIALS SCIENCE↗

Materials Data on CaSO6 by Materials Project

CaSO4O2 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of four hydrogen peroxide molecules and two CaSO4 sheets oriented in the (0, 1, 0) direction. In each CaSO4 sheet, Ca is bonded to six O atoms to form distorted CaO6 pentagonal pyramids that share corners with two equivalent SO4 tetrahedra, edges with two equivalent CaO6 pentagonal pyramids, and edges with two equivalent SO4 tetrahedra. There are a spread of Ca–O bond distances ranging from 2.33–2.47 Å. S is bonded to four O atoms to form SO4 tetrahedra that share corners with two equivalent CaO6 pentagonal pyramids and edges with two equivalent CaO6 pentagonal pyramids. There are a spread of S–O bond distances ranging from 1.47–1.51 Å. There are four inequivalent O sites. In the first O site, O is bonded in a 3-coordinate geometry to two equivalent Ca and one S atom. In the second O site, O is bonded in a 3-coordinate geometry to two equivalent Ca and one S atom. In the third O site, O is bonded in a water-like geometry to one Ca and one S atom. In the fourth O site, O is bonded in a water-like geometry to one Ca and one S atom.

36 MATERIALS SCIENCE↗

Desalinating a Real Hyper-Saline Pre-Treated Produced Water via Direct-Heat Vacuum Membrane Distillation

Membrane distillation (MD) is an emerging thermal desalination technology capable of desalinating waters of any salinity. During typical MD processes, the saline feedwater is heated and acts as the thermal energy carrier; however, temperature polarization (as well as thermal energy loss) contributes to low distillate fluxes, low single-pass water recovery and poor thermal efficiency. An alternative approach is to integrate an extra thermal energy carrier as part of the membrane and/or module assembly, which can channel externally provided heat directly to the membrane-feedwater interface and/or along the feed channel length. This direct-heat delivery has been demonstrated to increase single-pass water recovery and enhance the overall thermal efficiency. We developed a bench-scale direct-heated vacuum MD (DHVMD) process to desalinate pre-treated oil and gas "produced water" with an initial total dissolved solids of 115,500 ppm at a feed temperature ranging between 24 and 32 degrees C. We evaluated both water flux and specific energy consumption (SEC) as a function of water recovery. The system achieved a 50% water recovery without significant scaling, with an average flux >6 kg m-2 hr-1 and a SEC as low as 2,530 kJ kg-1. The major species of mineral scales (i.e., NaCl, CaSO4, and SrSO4) that limited the water recovery to 68% were modeled in terms of thermodynamics and identified by scanning electron microscopy and energy-dispersive X-ray spectroscopy. In addition, we further developed and employed a physics-based process model to estimate temperature, salinity, water transport and energy flows for full-scale vacuum MD and DHVMD modules. Model results show that a direct-heat input rate of 3,600 W can increase single-pass water recovery from 2.1% to 3.1% while lowering the thermal SEC from 7,800 kJ kg-1 to 6,517 kJ kg-1 in an unoptimized module. Finally, the scaling up potential of DHVMD process is briefly discussed.

brine↗

Influence of zwitterionic amphiphilic copolymers on heterogeneous gypsum formation: A promising approach for scaling resistance

Here, this study aims to investigate the influence of zwitterionic amphiphilic copolymers (ZACs) in the nucleation and growth of heterogeneous CaSO4 at the zwitterion-water interface, which is crucial for the prevention of mineral scaling and consequent downtime or suboptimal performance in industries like membrane desalination, heat exchangers, and pipeline transportation. In situ grazing incidence small angle X-ray Scattering (GISAXS), and quartz crystal microbalance with dissipation (QCM-D) techniques were used to analyze the evolution of CaSO 4 particles on two new ZAC coatings: poly-(trifluoroethyl methacrylate-random-sulfobetaine methacrylate) (PTFEMA-r-SBMA, or PT:SBMA) and poly(trifluoroethyl methacrylate-random-2-methacryloyloxyethyl phosphorylcholine) (PTFEMA-r-MPC, or PT:MPC). The results showed that PT:MPC coatings promoted nucleation but inhibited crystal growth, resulting in slower overall reaction kinetics on PT:MPC coatings compared to PT:SBMA coatings. Interfacial interactions involving the substrates, sulfate minerals, and ions were examined, revealing that calcium ion adsorption, primarily governed by electrostatic attraction, played a crucial role in the nucleation and growth processes on both ZAC coatings. The crystal characterization revealed a phase transition from bassanite to gypsum on both ZAC coatings, suggesting that these zwitterionic materials can influence the mineral phase of heterogeneously formed CaSO 4 crystals. These findings enhance our understanding of the fundamental mechanisms underlying heterogeneous CaSO 4 scaling in the presence of zwitterionic materials.

42 ENGINEERING↗

Mineral Scale Prevention on Electrically Conducting Membrane Distillation Membranes Using Induced Electrophoretic Mixing

The growth of mineral crystals on surfaces is a challenge across multiple industrial processes. Membrane-based desalination processes, in particular, are plagued by crystal growth (known as scaling), which restricts the flow of water through the membrane, can cause membrane wetting in membrane distillation, and can lead to the physical destruction of the membrane material. Scaling occurs when supersaturated conditions develop along the membrane surface due to the passage of water through the membrane, a process known as concentration polarization. To reduce scaling, concentration polarization is minimized by encouraging turbulent conditions and by reducing the amount of water recovered from the saline feed. In addition, antiscaling chemicals can be used to reduce the availability of cations. Here, we report on an energy-efficient electrophoretic mixing method capable of nearly eliminating CaSO4 and silicate scaling on electrically conducting membrane distillation (ECMD) membranes. The ECMD membrane material is composed of a percolating layer of carbon nanotubes deposited on porous polypropylene support and cross-linked by poly(vinyl alcohol). The application of low alternating potentials (2 Vpp,1Hz) had a dramatic impact on scale formation, with the impact highly dependent on the frequency of the applied signal, and in the case of silicate, on the pH of the solution.

54 ENVIRONMENTAL SCIENCES↗

Mineralization of Basalts in the CO2-H2O-SO2-O2 System

Sequestering carbon dioxide (CO2) containing minor amounts of co-contaminants in geologic formations was investigated in the laboratory through the use of high pressure static experiments. Five different basalt samples were immersed in water equilibrated with supercritical CO2 containing 1wt% sulfur dioxide (SO2) and 1wt% oxygen (O2) at reservoir conditions (~100 bar, 90°C) for 49 and 98 days. Gypsum (CaSO4) was a common precipitate, occurred early as elongated blades with striations, and served as substrates for other mineral products. Bimodal pulses of water released during dehydroxylation were key indicators along with X-ray diffraction for verifying the presences of jarosite-alunite group minerals. Well-developed pseudocubic jarosite crystals formed surface coatings, and in some instances mixtures of natrojarosite and natroalunite aggregated into spherically shaped structures measuring 100 μm in diameter. Reaction products were also characterized using infrared spectroscopy, which indicated OH and Fe-O stretching modes. The presences of jarosite-alunite group minerals were found in the lower wavenumber region from 700–400 cm-1. A strong preferential incorporation of Fe(III) into natrojarosite was attributed to the oxidation potential of O2. Evidence of CO2 was detected during thermal decomposition of precipitates, suggesting the onset of mineral carbonation.

Environmental Molecular Sciences Laboratory↗

Impact of Particle Generation Method on the Apparent Hygroscopicity of Insoluble Mineral Particles

Atmospheric mineral dust particles represent a major component of tropospheric aerosol mass and provide a reactive surface for heterogeneous reactions with trace atmospheric gases (Dentener et al. 1996).Heterogeneous processes alter the chemical balance of the atmosphere and also modify the physicochemical properties of mineral dust particles (Bauer et al. 2004). Organic and inorganic vapors can react with or partition to dust particles and alter their chemical composition (Al-Hosney et al. 2005; Laskin et al. 2005a, 2005b; Liu et al. 2008; Sullivan et al. 2007, 2009a; Sullivan and Prather 2007; Usher et al. 2003). Calcite (CaCO3) is one of the most reactive components of mineral dust, readily reacting with acidic gases. The fraction of CaCO3 in total dust mineralogy displays large variations between desert regions and other regions of the world as well as between individual mineral particles (Claquin et al. 1999; Jeong 2008; Laskin et al. 2005b; Sullivan et al. 2007). Through reactions with acidic gases CaCO3 can be converted to soluble hygroscopic products including CaCl2 and Ca(NO3)2, and sparingly soluble, non-hygroscopic products including CaSO4 and CaC2O4 (Krueger et al. 2004; Liu et al. 2008; Sullivan et al. 2009a, 2009b).

54 ENVIRONMENTAL SCIENCES↗

Diffraction studies of order-disorder at high pressures and temperatures

Recent developments at synchrotron X-ray beamlines now allow collection of data suitable for structure determination and Rietveld structure refinement at high pressures and temperatures on challenging materials. These include materials, such as dolomite (CaMg(CO{sub 3}){sub 2}) that tends to calcine at high temperatures, and Fe-containing materials, such as the spinel MgFe{sub 2}O{sub 4}, which tend to undergo changes in oxidation state. Careful consideration of encapsulation along with the use of radial collimation produced powder diffraction patterns virtually free of parasitic scattering from the cell in the case of large volume high-pressure experiments. These features have been used to study a number of phase transitions, especially those where superior signal-to-noise discrimination is required to distinguish weak ordering reflections. The structures adopted by dolomite, and CaSO4, anhydrite, were determined from 298 to 1466 K at high pressures. Using laser-heated diamond-anvil cells to achieve simultaneous high pressure and temperature conditions, we have observed CaSO{sub 4} undergo phase transitions to the monazite type and at highest pressure and temperature to crystallize in the barite-type structure. On cooling, the barite structure distorts, from an orthorhombic to a monoclinic lattice, to produce the AgMnO{sub 4}-type structure.

43 PARTICLE ACCELERATORS↗

Flue Gas Desulfurization (FGD) Wastewater Treatment Using Polybenzimidazole (PBI) Hollow Fiber (HF) Membranes

Polybenzimidazole (PBI) hollow fiber membranes were used to treat flue gas desulfurization (FGD) wastewater (WW) from a coal fired power plant. Membranes were tested using both single salt solutions and real FGD WW. The PBI membranes showed >99% rejection for single salt solutions of NaCl, MgCl2, CaSO4, and CaCl2 at approximately 2000 PPM (parts per million). The membranes also showed >97% rejection for FGD WW concentrations ranging from 6900 to 14,400 PPM total dissolved solids (TDS). The pH of the FGD WW was adjusted between 3.97–8.20, and there was an optimal pH between 5.31 and 7.80 where %rejection reached a maximum of >99%. The membranes were able to operate stably up to 50 °C, nearly doubling the water flux as compared to room temperature, and while maintaining >98% salt rejection.

activation energy↗

Diesel Particulate Filter Durability Performance Comparison Using Metals Doped B20 vs. Conventional Diesel Part II: Chemical and Microscopic Characterization of Aged DPFs

This project's objective was to generate experimental data to evaluate the impact of metals doped B20 on diesel particle filter (DPF) ash loading and performance compared to that of conventional petrodiesel. The effect of metals doped B20 vs. conventional diesel on a DPF was quantified in a laboratory controlled accelerated ash loading study. The ash loading was conducted on two DPFs - one using ULSD fuel and the other on B20 containing metals dopants equivalent to 4 ppm B100 total metals. Engine oil consumption and B20 metals levels were accelerated by a factor of 5, with DPFs loaded to 30 g/L of ash. Details of the ash loading experiment and on-engine DPF performance evaluations are presented in the companion paper (Part I). The DPFs were cleaned, and ash samples were taken from the cleaned material. X-ray Fluorescence (XRF), X-Ray Photoelectron Spectroscopy (XPS) and X-Ray Diffraction (XRD) were conducted on the ash samples. Core samples were taken from the cleaned DPF and were subjected to scanning electron microscope energy dispersive x-ray spectroscopy (SEM-EDS) and XRF analysis. A comparison of the data from the two DPFs is presented. The XRD and XPS analysis showed that the compounds present in the ash from the two DPFs were nearly identical, though differing in concentrations. CaSO4 was the biggest component of the ash from both DPFs. The metals doped B20 fuel resulted in ash with similar characteristics to that deposited by the lube oil and did not appear to have any deleterious physical effects on the DPF substrate (did not penetrate the substrate).

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗