Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carbamic Acid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

New chemistry for enhanced carbon capture: beyond ammonium carbamates

Carbon capture and sequestration is necessary to tackle one of the biggest problems facing society: global climate change resulting from anthropogenic carbon dioxide (CO 2 ) emissions. Despite this pressing need, we still rely on century-old technology—aqueous amine scrubbers—to selectively remove CO 2 from emission streams. Amine scrubbers are effective due to their exquisite chemoselectivity towards CO 2 to form ammonium carbamates and (bi)carbonates, but suffer from several unavoidable limitations. In this perspective, we highlight the need for CO 2 capture via new chemistry that goes beyond the traditional formation of ammonium carbamates. In particular, we demonstrate how ionic liquid and metal–organic framework sorbents can give rise to capture products that are not favourable for aqueous amines, including carbamic acids, carbamate–carbamic acid adducts, metal bicarbonates, alkyl carbonates, and carbonic acids. These new CO 2 binding modes may offer advantages including higher sorption capacities and lower regeneration energies, though additional research is needed to fully explore their utility for practical applications. Overall, we outline the unique challenges and opportunities involved in engineering new CO 2 capture chemistry into next-generation technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tetrameric self-assembling of water-lean solvents enables carbamate anhydride-based CO2 capture chemistry

Abstract Carbon capture, utilization and storage is a key yet cost-intensive technology for the fight against climate change. Single-component water-lean solvents have emerged as promising materials for post-combustion CO 2 capture, but little is known regarding their mechanism of action. Here we present a combined experimental and modelling study of single-component water-lean solvents, and we find that CO 2 capture is accompanied by the self-assembly of reverse-micelle-like tetrameric clusters in solution. This spontaneous aggregation leads to stepwise cooperative capture phenomena with highly contrasting mechanistic and thermodynamic features. The emergence of well-defined supramolecular architectures displaying a hydrogen-bonded internal core, reminiscent of enzymatic active sites, enables the formation of CO 2 -containing molecular species such as carbamic acid, carbamic anhydride and alkoxy carbamic anhydrides. This system extends the scope of adducts and mechanisms observed during carbon capture. It opens the way to materials with a higher CO 2 storage capacity and provides a means for carbamates to potentially act as initiators for future oligomerization or polymerization of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dinuclear Gold(I) Complexes Bearing Alkyl-Bridged Bis(N-heterocyclic carbene) Ligands as Catalysts for Carboxylative Cyclization of Propargylamine: Synthesis, Structure, and Kinetic and Mechanistic Comparison to the Mononuclear Complex [Au(IPr)Cl]

Eight new dinuclear gold(I) complexes, [Au 2 (L)X 2 ] (1–8), were synthesized using a straightforward synthetic procedure under very mild conditions. The complexes have been characterized by NMR spectroscopy, elemental analysis, and single-crystal X-ray structure analysis. Their catalytic activity was investigated in the carboxylative cyclization of propargylamine (PPA). A superior performance in comparison to [Au(IPr)Cl] (9) was obtained for complexes 1 and 2 having an eight-methylene bridge connecting two NHCs with an arene bearing an isopropyl substituent for X = Cl, Br. This prompted more detailed kinetic and mechanistic studies by FTIR comparing dinuclear complex 2 of X = Cl to complex 9. Fortuitously the FTIR studies allowed monitoring of the formation of the products carbamic acid (CA) and carbamate salt (CS), as well as a key cyclized intermediate first discovered by Ikariya. These data allow additional insight into the mechanism as well as the central role which may be played by Au(I) carbamate formation as a higher energy resting state present in the catalytic cycle. In conclusion, the crystal structures of four of the new complexes and a detailed computational study relevant to the role of carbamic acid (CA) and carbamates in the catalytic cycle are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Supramolecular Complexation-Enhanced CO 2 Chemisorption in Amine-Derived Sorbents

A supramolecular complexation approach is developed to improve the CO 2 chemisorption performance of solvent-lean amine sorbents. Operando spectroscopy techniques reveal the formation of carbamic acid in the presence of a crown ether. Here, the reaction pathway is confirmed by theoretical simulation, in which the crown ether acts as a proton acceptor and shuttle to drive the formation and stabilization of carbamic acid. Improved CO 2 capacity and diminished energy consumption in sorbent regeneration are achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Reactive CO 2 capture via controlled amine speciation in non-aqueous electrolytes

Current efforts to integrate CO 2 capture and electrochemical conversion (reactive capture) are often performed under aqueous conditions, resulting in undesired hydrogen evolution and reliance on precious metal catalysts and pure CO 2 streams. Here, in this study, we explore reactive capture in aprotic media. By shifting the amine–CO 2 adduct speciation to carbamic acid (instead of carbamate) in dimethyl sulfoxide, we increased CO 2 uptake threefold compared with an aqueous medium, suppressing hydrogen evolution and supporting a 78% Faradaic efficiency towards CO over an earth-abundant zinc catalyst. Under simulated high-oxygen-content flue gas (17% CO 2 , 17% O 2 , 66% N 2 ), we also obtained up to 43% CO Faradaic efficiency over multiple capture–conversion cycles. Our findings showcase the confluence of reactant speciation, electrolyte composition and electrocatalyst design in enabling selective and active electrochemical transformations.

Gomes, Reginaldo J. [Univ. of Chicago, IL (United ↗
DOE OSTI2025

Detecting Reactive Products in Carbon Capture Polymers with Chemical Shift Anisotropy and Machine Learning

Aminopolymers are attractive sorbents for CO 2 direct air capture applications due to their high density of amine groups, which can readily react with atmospheric levels of CO 2 to form chemisorbed species. The identity of these chemisorbed species and the functional groups that form upon oxidative degradation depends on both material properties and processing conditions, forming a variety of carbonyl-type sites such as ammonium carbamates, bicarbonates, carbonates, carbamic acids, ureas, and amides. 13 C solid-state nuclear magnetic resonance (NMR) is often used to help elucidate the identity of these reacted species, but it is challenging due to the narrow chemical shift range of carbonyl sites. Herein, we demonstrate the application of a two-dimensional (2D) chemical shift anisotropy (CSA) recoupling pulse sequence (ROCSA) to obtain CSA tensor values at each isotropic chemical shift, overcoming limitations of isotropic peak resolution. CSA tensor values describe the local chemical environment and can readily differentiate between the chemisorbed and degradation products. To aid identification, we also developed a k-nearest neighbor (kNN) classification model to distinguish the functional groups via their CSA tensor parameters. This methodology was demonstrated on poly(ethylenimine) in γ-Al 2 O 3 exposed to CO 2 and showed that the chemisorbed products are ammonium carbamate and a mixed carbamate–carbamic acid species. The sample was analyzed again after desorption at 100 °C inducing mild degradation, and the remaining products were strongly bound carbamate and urea species. In conclusion, the combination of 2D CSA measurements coupled with a kNN classification model enhances the ability to accurately identify chemisorbed or degradation products in complex carbon capture materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Six-Membered Concerted Mechanism for CO 2 Capture by Amines Studied under Charged Microdroplet Reaction Conditions

Carbon dioxide (CO 2 ) capture and storage represents an important technological challenge. A mechanistic understanding of interactions involved in the capture process is necessary not only for technological development but also for efficient conversion of captured CO 2 into value-added materials. Herein, we present a novel contained secondary electrospray ionization platform for studying the interactions of gaseous amines and CO 2 gas under microdroplet reaction conditions, which enables mass spectrometry (MS) characterization of CO 2 capture products and intermediates in real time. We detected [2 M + CO 2 + H] + species, which corresponds to a six-membered intermediate. DFT calculations confirmed the high stability of the protonated six-membered ring intermediate. This finding provides a plausible concerted mechanism in the microdroplet environment that excludes the involvement of thermodynamically disfavored ionic species. The carbamic acid counterpart of the final product/salt was readily characterized by tandem MS. The carbamic acid/amine salt was also isolated and characterized by Fourier transform infrared spectroscopy. By virtue of the fact that headspace vapors of amines are sampled, we were able to establish a high-throughput platform that enabled the CO 2 capture capacity of five different amines to be studied in under 2 min. The same device also enabled the absolute quantification of capture capacity.

Amines↗
DOE OSTI2020

The mechanism of carboxylative cyclization of propargylamine by N-heterocyclic carbene complexes of Au(I)

Here, the complex [Au(IPr)(2-oxazolidinone)] (1 = IKa) was prepared from reaction of [Au(IPr)Cl] (2), K 2 CO 3 , and propargyl amine (PPA). Kinetic studies have been performed for acid cleavage of 1 to yield the oxazolidinone product and an [Au(IPr)(X)] adduct. The fastest rates of cleavage were found to occur for the hydrogen chloride salt of PPA (PPA-HCl) and for the CO 2 adduct of PPA, PPA-CO 2 = the carbamic acid (CA). This transformation was studied as a function of [CA], pressure of CO 2 as well as temperature. Detailed computational studies support the formation of a key intermediate and are also in agreement with a rapid carbonylation/decarbonylation reaction. The computed reactions mechanisms for addition of PPA-HCl and CA are also presented as well as the crystal structure of 1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A scalable solid-state nanoporous network with atomic-level interaction design for carbon dioxide capture

Carbon capture and sequestration reduces carbon dioxide emissions and is critical in accomplishing carbon neutrality targets. Here, we demonstrate new sustainable, solid-state, polyamine-appended, cyanuric acid–stabilized melamine nanoporous networks (MNNs) via dynamic combinatorial chemistry (DCC) at the kilogram scale toward effective and high-capacity carbon dioxide capture. Polyamine-appended MNNs reaction mechanisms with carbon dioxide were elucidated with double-level DCC where two-dimensional heteronuclear chemical shift correlation nuclear magnetic resonance spectroscopy was performed to demonstrate the interatomic interactions. We distinguished ammonium carbamate pairs and a mix of ammonium carbamate and carbamic acid during carbon dioxide chemisorption. The coordination of polyamine and cyanuric acid modification endows MNNs with high adsorption capacity (1.82 millimoles per gram at 1 bar), fast adsorption time (less than 1 minute), low price, and extraordinary stability to cycling by flue gas. This work creates a general industrialization method toward carbon dioxide capture via DCC atomic-level design strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enhancing CO 2 Transport Across a PEEK‐Ionene Membrane and Water‐Lean Solvent Interface

Abstract Efficient direct air capture (DAC) of CO 2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO 2 ‐selective membrane coupled with a CO 2 capture solvent acting as a draw solution. Here, the interactions between a leading water‐lean carbon‐capture solvent, a polyether ether ketone (PEEK)‐ionene membrane, CO 2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO 2 , presenting spectroscopic evidence of CO 2 diffusion through benzylic regions within the PEEK‐ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water‐lean capture solvents provide a thermodynamic and kinetic funnel to draw CO 2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon‐capture solvent and CO 2 produces carbamic acid, disrupting interactions between the imidazolium (Im + ) cations and the bistriflimide anions within the PEEK‐ionene membrane, thereby creating structural changes through which CO 2 can diffuse more readily. Consequently, this restructuring results in CO 2 diffusion at the interface that is faster than CO 2 diffusion in the bulk carbon‐capture solvent.

Walter, Eric D.↗
DOE OSTI2020

Sequential Ammonia and Carbon Dioxide Adsorption on Pyrolyzed Biomass to Recover Waste Stream Nutrients

Untreated fecal waste in unsewered communities and reactive nitrogen (N) loading from wastewater and urine disposal are important environmental challenges. Through pyrolysis, untreated fecal waste can be converted into amine-rich carbon dioxide (CO 2 ) sorbents, the chemisorption of which tunes the surface chemistry toward ammonia (NH 3 ) uptake. We compared the N-loading potential within amine-rich pyrolyzed human solid waste through exposure to CO 2 followed by NH 3 with the N-loading potential on carboxyl-rich, pyrolyzed oxidized wood using sequential adsorption of isotopically labeled CO 2 and NH 3 . The total N content of pyrolyzed oxidized wood exposed once to NH3 was similar to native, pyrolyzed human solid waste (3.7% compared to 4.6%). However, sorption kinetics and spectroscopic evidence revealed distinct N forms between the two materials affecting subsequent CO 2 and NH 3 uptake. Tertiary amines comprised 70% of N in pyrolyzed waste, compared to only 53% in pyrolyzed oxidized wood. The high heat of adsorption of CO 2 on pyrolyzed human solid waste (50 kJ mol-1) at low concentrations (0.05 mmol CO 2 g -1 ) was indicative of CO 2 reactivity with tertiary amines, consistent with the formation of carbamic acid (Figure S1). Conversely, after exposure to NH 3 , pyrolyzed oxidized wood chemisorbed CO 2 at much higher concentrations (0.7 mmol CO 2 g-1), pointing to primary amines as the active functional moieties. Adsorption kinetics of pyrolyzed oxidized wood revealed continued, albeit diminishing NH 3 uptake with each consecutive CO 2 treatment, averaging 5.9 mmol NH 3 g -1 for the first NH 3 exposure event, and still 3.5 and 2.9 mmol NH 3 g -1 for the second and third. Penetration of 15 NH 3 and 13 CO 2 measured by NanoSIMS reached over 7 µm deep into both materials, explaining the large NH 3 capture. The significantly lower NH 3 adsorption compared to pyrolyzed oxidized wood may be a result of potassium (K) carbonate precipitation precluding a Lewis base interaction between NH 3 and chemisorbed CO 2 , suggested by a 2-fold increase in surface K concentrations after exposure of pyrolyzed human solid waste to CO 2 +NH 3 detected by XPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Discerning molecular-level CO 2 adsorption behavior in amine-modified sorbents within a controlled CO 2 /H 2 O environment towards direct air capture

Sorbents designed for direct air capture (DAC) play a crucial role in the pursuit of achieving net-zero carbon dioxide emissions. This study elucidates CO 2 adsorption from dilute, humidified CO 2 streams onto an amine-modified benchmark DAC adsorbent via solid-state NMR spectroscopy. Various NMR techniques, including 1D 1 H MAS, 13 C MAS, 2D 1 H– 13 C HETCOR NMR, and 1 H R 2 and R 1ρ relaxometry reveal the impact of CO 2 partial pressure and H 2 O on CO 2 adsorption behavior. Here we find that CO 2 concentration governs the stepwise formation of ammonium carbamate, carbamic acid, and physisorbed CO 2 , where relative humidity (RH) at a desired low (<400 ppm) CO 2 loading affects total CO 2 uptake. The relaxation studies reveal the cooperative or competitive nature of H 2 O–CO 2 sorption in CO 2 -dilute humid gas, and in particular polymer swelling upon humidification. From those results, we demonstrate that the observed absorption capacity enhancement by humidity is caused by pore opening due to sorbent swelling, and not by bicarbonate formation. This NMR-discerned speciation provides insights into sorption behavior at different RHs in dilute CO 2 gas streams, simulating real-world atmospheric conditions, and governs the design of efficient and adaptable material-process combinations for solid sorbent DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Materials Data on BH5C4(N2O)2 by Materials Project

(B)6(CN)4(H5(C2N)2)2(CNH2)4(CHNO2)4(N2H)4(H(CO)2)2H2 crystallizes in the orthorhombic Pnn2 space group. The structure is zero-dimensional and consists of six boron molecules; four carbamic acid molecules; four diazene molecules; two formalin formaldehyde molecules; two hydrogen molecules; four hydrogen cyanide molecules; four methylamine molecules; and two n,n'-dimethylethylenediamine molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on H6C(NO)2 by Materials Project

NH4CH2NO2 crystallizes in the orthorhombic Ibam space group. The structure is zero-dimensional and consists of eight ammonium molecules and eight carbamic acid molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Adsorption, Orientation, and Speciation of Amino Acids at Air–Aqueous Interfaces for the Direct Air Capture of CO 2

Amino acids make up a promising family of molecules capable of direct air capture (DAC) of CO 2 from the atmosphere. Under alkaline conditions, CO 2 reacts with the anionic form of an amino acid to produce carbamates and deactivated zwitterionic amino acids. The presence of the various species of amino acids and reactive intermediates can have a significant effect on DAC chemistry, the role of which is poorly understood. In this study, all-atom molecular dynamics (MD) based computational simulations and vibrational sum frequency generation (vSFG) spectroscopy studies were conducted to understand the role of competitive interactions at the air–aqueous interface in the context of DAC. We find that the presence of potassium bicarbonate ions, in combination with the anionic and zwitterionic forms of amino acids, induces concentration and charge gradients at the interface, generating a layered molecular arrangement that changes under pre- and post-DAC conditions. In parallel, an enhancement in the surface activity of both anionic and zwitterionic forms of amino acids is observed, which is attributed to enhanced interfacial stability and favorable intermolecular interactions between the adsorbed amino acids in their anionic and zwitterionic forms. The collective influence of these competitive interactions, along with the resulting interfacial heterogeneity, may in turn affect subsequent capture reactions and associated rates. Finally, these effects underscore the need to consider dynamic changes in interfacial chemical makeup to enhance DAC efficiency and to develop successful negative emission and storage technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enhanced Carbon Dioxide Capture Using a Mixed Amino Acid Salt Solution

This study investigated the carbon dioxide (CO 2 ) absorption and desorption performance of a mixed amino acid solution (containing glycine (G), alanine (A), proline (P), and lysine (L), GAPL). These four amino acids were intentionally selected to reflect the chemical and structural variations (pK a and steric hindrance of amino groups) of amino acids. The single cycle CO 2 capture experiment showed that the GAPL salt solution had 19% higher CO 2 absorption (0.91 mol CO 2 /mol amino acids) compared to the absorption calculated by adding the proportional capacities of G, A, P, and L (0.77 mol CO 2 /mol amino acids). 13 C NMR data delineated the effects of individual amino acids on carbamate and bicarbonate/carbonate formation and elucidated the distribution of captured CO 2 in the GAPL salt solution. The recirculation experiment concluded that the GAPL salt solution had much better CO 2 capture performance than the conventional monoethanolamine process. Less than 10% of the absorption and cyclic capacity of the GAPL salt solution was lost after ten cycles of CO 2 capture. Furthermore, this study demonstrated an approach that blended amino acid solutions can be tailored and designed as new, efficient reagents to massively capture CO 2 in a technically feasible, economically viable, and environmentally friendly manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrocatalysis in CO 2 -Binding Organic Liquids with an Iron Porphyrin

Direct electrochemical upgrading of CO 2 in capture media is an attractive approach to carbon capture that can bypass the energy requirement for the thermal release of pure CO 2 . Here we investigate the electrocatalytic activity of iron(tetraphenylporphyrin) in the presence of organic solvents that convert into ionic liquids upon exposure to CO 2 . Four different solvent systems were tested, all of which capture CO 2 in the form of an alkyl carbonate (or carbamate) anion and an acidic ammonium cation. The electrocatalytic selectivity exhibited a strong dependence on the acidity of the capture medium, with the most basic solvent affording a high selectivity for production of CO instead of H 2 . Experimental and computational studies support a canonical mechanism in which the catalyst reacts with free CO 2 in solution, as opposed to a reaction with the alkyl carbonate that is present in high concentration. Kinetic analysis indicates that the rate-limiting step is changed from C–O protonolysis in traditional solvents to the binding of CO 2 in the capture media. Quantitative 13 C– 13 C EXSY revealed that the dissociation of the alkyl carbonate into free, solvated CO 2 is very rapid (~15 s –1 ) compared to the interconversion of HCO 3 – /CO 2 in aqueous solution. These results underscore the need to understand the mechanism and kinetics for both the release of captured CO 2 and its electrocatalytic conversion.

Carbon Dioxide↗