Molten salt synthesis of Ce doped zirconolite for the immobilisation of pyroprocessing wastes and separated plutonium
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “Ce doping”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Luminescence Quenching via Deep Defect States: A Recombination Pathway via Oxygen Vacancies in Ce-Doped YAG
Luminescence quenching via nonradiative recombination channels limits the efficiency of optical materials such as phosphors and scintillators and therefore has implications for conversion efficiency and device lifetimes. In materials such as Ce-doped yttrium aluminum garnet (YAG:Ce), quenching shows strong dependence on both temperature and activator concentration, limiting the fabrication of high-intensity white-light emitting diodes with high operating temperatures. Here, we reveal by means of first-principles calculations an efficient recombination mechanism in YAG:Ce that involves oxygen vacancies and gives rise to thermally activated concentration quenching. We demonstrate that the key requirements for this mechanism to be active are localized states with strong electron-phonon coupling. These conditions are commonly found for intrinsic defects such as anion vacancies in wide band gap materials. The present findings are therefore relevant to a broad class of optical materials and shine light on thermal quenching mechanisms in general.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Inkjet-printed Ce-doped SnO x electron transport layer for improved performance of planar perovskite solar cells
Inkjet-printed Ce-doped SnO x ETLs achieved improved photovoltaic performance originating from the increased conductivity, suppressed surface defects, and improved energy level alignment at the ETL/perovskite interface, compared to undoped SnO x ETLs.
Lu, Dongli↗
A Ce-Doped LiI Scintillator Film-Based High Rate, High Spatial Resolution Neutron Anger Camera for Neutron Scattering Facilities
The 2-D position sensitive neutron detectors featuring a significantly improved count rate capacity and a sub-mm spatial resolution are in high demand by neutron scattering facilities, especially the next generation high-flux spallation neutron sources (SNSs). They are anticipated to play a crucial role in fully utilizing the unprecedentedly high neutron brightness offered by these sources. In this work, a high rate and high spatial resolution neutron Anger camera has been successfully developed based on a Ce-doped microcolumnar LiI scintillator film and the PETsys TOFPET2 ASIC readout electronics. The performance evaluation was conducted in a standard laboratory environment as well as the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) with regard to light yield, γ-ray sensitivity, neutron detection efficiency, count rate capability, spatial resolution, and position linearity. The LiI:Ce scintillator was found to have a higher light yield and a lower γ-ray sensitivity than GS20 (i.e., 11729 versus 6000 photons/n and 1.67 × 10 −5 versus on the order of 10 −4 ). The neutron detection efficiency was measured to be 63% at 4.2 Å. This camera demonstrated an exceptional count rate capability, up to at least 481 kHz without rate loss. The spatial resolution was as good as 0.47 mm. Here, the position linearity was also enhanced.
High rate↗
Characterization of EJ-270 and Ce-doped LiCAF scintillators for the development of high-rate neutron reflectometer detectors
The Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory is anticipated to provide a neutron source with ∼20 times increase in peak brightness than the First Target Station. The neutron reflectometers currently in operation at the First Target Station need to be upgraded due to the increased neutron flux. A prototype neutron detector module based upon a pixelated scintillator array readout by silicon photomultipliers is being developed to address the high-rate challenge faced with future neutron reflectometer instruments at the Second Target Station. Two types of scintillator materials were considered for this detector development, i.e., 6 Li-loaded EJ-270 plastic scintillator and Ce-doped LiCAF single crystal. This paper reports the scintillator characterization results, including light yield, pulse shape discrimination performance, capability to detect thermal neutrons in a high γ-ray field, and γ-ray sensitivity. The number of photons produced per neutron capture by EJ-270 and LiCAF:Ce was measured to be 2176 ± 91 and 2651 ± 108, respectively. EJ-270 demonstrated a good capability to discriminate between neutrons and γ-rays by employing the commonly used charge comparison method (figure-of-merit: 1.13 ± 0.01 for an energy cut of 292–426 keVee) and a reasonable performance when using the time-over-threshold techniques; however, no discrimination was observed from LiCAF:Ce regardless of the pulse shape discrimination approaches utilized, making pulse height discrimination necessary for LiCAF:Ce to differentiate between neutrons and γ-rays. Both EJ-270 and LiCAF:Ce exhibited an acceptable capacity to detect thermal neutrons at high exposure rates up to approximately 584 mR/h. Furthermore, the γ-ray sensitivities measured with a 60 Co source at an exposure rate of around 1145 mR/h were determined to be (6.11 ± 0.87) × 10 −6 and (7.64 ± 1.08) × 10 −7 for EJ-270 and LiCAF:Ce, respectively.
EJ-270↗
Enhanced magnetostriction through dilute Ce doping of Fe-Ga
Doping of magnetostrictive galfenol (Fe 82 Ga 18 , in at.%) with rare-earth elements significantly enhances magnetostriction, with the largest gains achieved in textured melt-spun ribbons. Here, it is demonstrated that even extremely dilute Ce, as little as 65 ppm, can double the magnetostrictive response of galfenol when coupled with an appropriate heat treatment. This improvement is correlated with a compression of the host lattice, both of which reach their maximum extent at the calculated solubility limit of Ce in in body-centered cubic (bcc) galfenol, ~ 50 ppm. Beyond this point, excess Ce segregates into CeGa 2 , which forms an interdendritic network throughout the sample at high Ce levels and cannot be resolutionized through heat treatments. These findings point to the importance of solubility limits (i.e., equilibrium thermodynamics) in determining appropriate doping levels or heat treatment couples to optimize magnetostrictive performance, confirming that overdoping is actively detrimental to both material properties and cost.
36 MATERIALS SCIENCE↗
Compositional screening of Ce-doped (Gd,Lu,Y) 3 (Al,Ga) 5 O 12 ceramics prepared by quenching from melt and their luminescence properties
Quenching from the melt using an Optical Floating Zone furnace was investigated as a possible high-throughput preparation method in order to screen novel scintillating materials. To validate this method, polycrystalline rare-earth aluminum garnets and yttrium gallium aluminum garnets were synthesized and characterized by X-ray diffraction, photoluminescence and radioluminescence emission spectra as well as radioluminescence imaging and compared to the previously reported properties of those materials. In order to achieve rapid, but quantitative comparison of the materials, pellets fabricated from the synthesized powders were sintered; two different sintering conditions were investigated and compared. Therefore, a simplistic energy deposition and light absorption model for brightness of opaque samples under X-ray irradiation was developed to estimate the relative scintillation efficiency of the materials. Based on the results, Y 3 Al 5 O 12 , LuY 2 Al 5 O 12 and GdY 2 Al 5 O 12 seem to have the highest scintillation efficiency among the prepared samples.
36 MATERIALS SCIENCE↗
Magnetic properties of Lutetium and Yttrium doped Ce 2 Fe 14 B magnets
The increasing demand for Nd-Dy and Sm-Co based permanent magnets is exacerbating the current critical materials shortage, therefore improving and optimizing current candidate critical element free permanent magnets is necessary to develop future clean energy technologies. In this work, we aim to increase the thermal stability and magnetic performance of Ce 2 Fe 14 B based permanent magnets through the substitution of Ce ions with noncritical rare earth elements Lu and Y. The substitution of Lu (x=0; 0.05; 0.1; 0.15) for Ce ions in (LuxCe 2-x )Fe 14 B was unsuccessful, likely due to disparities in ionic size and valencies, and failed to exhibit improved thermal stability or magnetic performance. In contrast, Y substitution for Ce ions in (Y x Ce 2-x )Fe14B (x= 0.1; 0.2; 0.3; 0.4; 0.5) alloys was successful. Notably, these alloys demonstrated enhanced thermal stability, as evidenced by an increase in the Curie temperature, reaching a peak of 443 K at x= 0.5. Y substitution also helped to suppress the CeFe2 Laves phase. Without loss of the anisotropy field Y substitution increased the saturation magnetization, MS, peaking at MS = 125 emu/g for a Y concentration of x= 0:4, demonstrating (Y 0.4 Ce 1.6 )Fe 14 B as a potential critical element free permanent magnet with an energy product as high as 29 MGOe. This work is advantageous in developing low cost high performance permanent magnets with reduced or little to no critical rare earth elements.
Rai, Binod K.↗
Compositional screening of Ce-doped (Gd,Lu,Y)3(Al,Ga)5O12 ceramics prepared by quenching from melt and their luminescence properties
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Modeling the performance and faradaic efficiency of solid oxide electrolysis cells using doped barium zirconate perovskite electrolytes
Y-doped BaZrO 3 (BaZr 1 x Y x O 3 δ , or “BZY”), a proton-conducting ceramic featuring high bulk conductivity and good chemical stability, is a promising electrolyte material for solid oxide electrolysis cells. Further doping with Ce and/or Yb (creating materials “BCZY” and “BCZYYb”) can improve conductivity and sintering properties, but at significant penalty to cells’ faradaic efficiency (FE). Studies have proposed that reduction of lattice Ce can occur in the hydrogen electrode, which consumes some hydrogen produced by the hydrogen evolution reaction, leading to decreased FE. Despite studies suggesting this phenomenon, the mechanism is largely unknown. In this work, we developed a multiphysics model to study the transport of multiple defect species and the performance of BZY, BCZY, and BCZYYb, capturing the tradeoff between enhanced performance at the cost of FE for BCZY and BCZYYb electrolytes compared to BZY. We also found that increasing the water content of the anode gas supply lowers the current output of the cell but results in better FE. The model, which uses several parameters previously unavailable in the literature, was validated to experiments varying temperature, steam water content, and electrolyte material, as well as two performance metrics (performance curves and FE). Results verify and explain observed trends, informing future work on Ce-doped BZY electrolytes.
08 HYDROGEN↗
Investigation of the competition between Tl + and Ce 3+ scintillation in Tl2LiYCl6:Ce, an elpasolite scintillator
Li-containing elpasolite scintillators are currently investigated for their ability to detect both thermal neutrons and gamma photons with a single inorganic crystal. The scintillation is typically triggered by using an activator such as Ce. However, when Tl, also a luminescent ion, is present in the matrix, competition between the two centers Tl and Ce can occur. In this study, we are using Ce doped Tl 2 LiYCl 6 to investigate this competition. To this end, the Ce (which substitutes Y) concentration is varied from 0 to 1 in the Tl 2 LiY 1-x CexCl 6 composition. In the low concentration range in which Ce remains a dopant, the photo- and radioluminescence spectra show that the scintillation of Tl 2 LiYCl 6 :Ce is mostly dominated by recombination on intrinsic luminescent centers. For cerium concentrations higher than x = 0.02, very different emissions can be easily distinguished from the photo- and radioluminescence of undoped and low Ce doped Tl 2 LiYCl 6 crystals. These emissions are attributed to the formation of a second phase Tl 2 CeCl 5 , identified by X-ray diffraction. We conclude that the intrinsic luminescence related to Tl dominates the scintillation in the range of concentration for which Ce does substitute on the Y-site.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Thallium-based scintillators for high-resolution gamma-ray spectroscopy: Ce 3+ - doped Tl 2 LaCl 5 and Tl 2 LaBr 5
In this paper we report on the crystallographic and scintillation properties of Tl 2 LaCl 5 :Ce 3 + and Tl 2 LaBr 5 :Ce 3 + , two novel thallium-containing high-resolution scintillators for gamma-ray spectroscopy. Crystals of Tl 2 LaCl 5 :Ce 3 + and Tl 2 LaBr 5 :Ce 3 + were grown by the Vertical Bridgman method up to 1-inch diameter and 1-inch long. Single crystals of Tl 2 LaCl 5 :Ce 3 + and Tl 2 LaBr 5 :Ce 3 + belong to the orthorhombic system with space group 62 and have a density of 5.16 and 5.98 g/cm 3 , respectively. The scintillators show high light yields of up to 68,000 photons/MeV, excellent gamma-ray energy resolution of ≤ 3% at 662 keV, a fast scintillation decay, and a proportional response over a wide range of energies from 32 keV up to 1275 keV. Density Functional Theory calculations show that the Ce 3 + energy levels are inside the bandgap despite the smaller bandgap of Tl 2 LaCl 5 and Tl 2 LaBr 5 compared to K 2 LaCl 5 and K 2 LaBr 5 . Finally, a systematic Ce 3 + concentration study was performed for Tl 2 LaCl 5 :Ce 3 + and trends observed.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Magnetic properties of Lu and Y doped Ce-Fe-B magnets
The growing demand for Nd2Fe14B magnets is exacerbating the current critical materials shortage. To reduce the amount of critical material in Nd2Fe14B magnets, chemical substitutions have been used and shown to improve the magnetic behavior, such as the Curie Temperature TC, anisotropy field Ha, and saturation magnetization MS.
Bretana, Alex↗
Spectroscopic Investigation of Ce(3+) Doped Fluoride Crystals
Doping of the trivalent rare-earth cerium ion into fluoride crystals is of interest in producing turnable ultra-violet solid state lasers. These lasers are desirable for many applications in medicine, industry, and scientific research, including remote sensing. High absorption and stimulated emission cross sections of the dipole allowed 4f-5d transitions show promise in cerium as a laser ion in crystals. Several research groups have already reported the observation of stimulated emission of cerium in LiYF4, LiSrAlF6, and LiCaAlF6. However, the color center formation in the crystals due to the excited state absorption of ultra-violet pump light adds difficulty to achieving laser action. We have investigated the spectroscopic properties of cerium such as absorption and emission spectra, and lifetimes in four different fluoride crystals, including LiCaAlF6, LiSrAlF6, KyF4 and LiYF4. We have derived the polarized absorption and stimulated emission cross sections from transmission and fluorescence emission measurements for each of the host crystals. we have measured the lifetime of the lowest 5d level; moreover, investigated the temperature dependence of this lifetime and color center formation. Our results on absorption and stimulated emission cross sections for LiCaAlF6 and LiSrAlF6 are similar to the results already published.
Reinhart, Donald H.↗
Elastic and thermodynamic properties of cerium-doped yttrium aluminum garnets
Cerium-doped yttrium aluminum garnets (Y 3-x Ce x Al 5 O 12 , Ce:YAGs) are promising yellow light-emitting components of solid-state white light-emitting diodes. Although there have been numerous studies examining the effects of Ce concentrations on the luminescent properties of Y 3-x Ce x Al 5 O 12 , the impacts of Ce dopant on the elastic and thermodynamic properties are not well understood. In this work, we used resonant ultrasound spectroscopy (RUS) to determine the effects of Ce doping (0.025, 0.1, 1 at. %) on the elastic and thermodynamic properties of Y 3-x Ce x Al 5 O 12 . The elastic moduli calculated via the Voigt–Reuss–Hill (VRH) method demonstrated that low Ce dopant concentrations (≤0.1 at. %) induced negligible effects on the elasticity of the YAG host matrix, while a high Ce concentration (1 at. %) yielded significant softening. RUS spectral analysis and SEM images suggested that the elastic softening originated from microstructural differences induced at higher Ce dopant concentrations. Additionally, we demonstrated an increase in elastic anisotropy at higher Ce concentrations, which further elucidated the correlations between structure and elasticity of Y 3-x Ce x Al 5 O 12 . Debye temperatures ($θ_D$), heat capacities ($C_p$), and thermal conductivities ($\mathit{κ}$) were calculated for Ce:YAGs through the relations of RUS-derived parameters (sound velocities, elastic moduli) and previously determined thermal expansion coefficients. Ce:YAG was found to have a significant reduction in $θ_D$, Cp, and $\mathit{κ}$ at Ce concentrations ≥1 at. %. Lastly, extrapolation of $C_p$ and $\mathit{κ}$ to higher temperatures allowed the modeling of thermal stress experienced by Y 3-x Ce x Al 5 O 12 disks up to 1073.15 K.
36 MATERIALS SCIENCE↗
Enhancement of oxidative dehydrogenation over cerium-doped nickel niobium catalysts and analysis of batch-to-batch variability
Nickel based catalysts are inexpensive and efficient for use in the oxidative dehydrogenation of ethane. NiO doped with niobium and cerium shows increased ethylene production. Small amounts of Ce doped onto a NiNb catalyst led to increased Ni activity. The catalyst that had the highest ethylene production rate per g of catalyst had 1 atom% Ce, 86 at% Ni, and 13 at% Nb (1CeNiNb) while, if surface area is incorporated into the calculation, the catalyst that had the highest ethylene production rate per m 2 was the 0.5CeNiNb catalyst. The ethylene production rates of these Ce-containing catalysts are 27 %-127 % higher than those with NiNb alone previously reported in the literature. Here, to fully understand how cerium affects the NiNb catalyst, the Ce content and effect on active sites has been fully characterized over multiple batches. In doing this, light has been shed on batch-to-batch variability. Characterization techniques such as powder X-ray diffraction, hydrogen temperature programmed reduction, X-ray photoelectron spectroscopy, synchrotron X-ray absorption spectroscopy, and methanol adsorption were used.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Influence of atomic ordering and cerium doping on magnetostrictive Fe-Al alloys
Magnetostrictive iron-aluminum alloys can be a low-cost, mechanically stable alternative to iron-gallium and rare earth-iron alloys. The magnetostrictive performance of polycrystalline Fe-Al (alfenol) with 13–24 at. % Al was investigated, studying the role of compositional variation and thermal history. It was found that rapid cooling enhances the magnetostrictive response, and peak magnetostriction was found in Fe 78 Al 22 by high temperature annealing followed by quenching. Synchrotron diffraction enabled a direct correlation of magnetostrictive behavior and the transition from short-range order to long-range ordered cluster domains in the material which can be suppressed by rapid cooling. Following recent success of doping Fe-Ga with rare earth elements, we investigated the influence of Ce doping on improving magnetostriction and found that Fe-Al shows negligible solubility for cerium, inhibiting potential magnetostriction enhancement. In conclusion, our results illustrate the complex interplay between phase stability, ordering, and optimized magnetostrictive response.
36 MATERIALS SCIENCE↗