Search NASA⌕ Search

SEARCH · Search NASA

Results for “Charge transfer efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Modulating Charge Transfer Efficiency of Hematite Photoanode with Hybrid Dual‐Metal–Organic Frameworks for Boosting Photoelectrochemical Water Oxidation

Abstract The glorious charge transfer efficiency of photoanode is an important factor for efficient photoelectrochemical (PEC) water oxidation. However, it is often limited by slow kinetics of oxygen evolution reaction. Herein, a dual transition metal‐based metal–organic frameworks (MOF) cocatalyst, Fe@Ni–MOF, is introduced into a titanium‐doped hematite (Fe 2 O 3 :Ti) photoanode. The combination of Ni and Fe can optimize the filling of 3d orbitals. Moreover, the introduction of Fe donates electrons to Ni in the MOF structure, thus, suppressing the irreversible (long‐life‐time) oxidation of Ni 2+ into Ni 3+ . The resulting Fe@Ni–MOF/Fe 2 O 3 :Ti photoanode exhibits ∼threefold enhancement in the photocurrent density at 1.23 V versus the reversible hydrogen electrode. Kinetic analysis of the PEC water oxidation processes indicates that this performance improvement is primarily due to modulating the charge transfer efficiency of hematite photoanode. Further results show that a single transition metal‐based MOF cocatalyst, Ni–MOF, exhibits slow charge transfer in spite of a reduction in surface charge recombination, resulting in a smaller charge transfer efficiency. These findings provide new insights for the development of photoelectrodes decorated with MOFs.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Charge transfer efficiency measurements at low signal levels on STIS/SOHO TK1024 CCD's

Charge transfer efficiency (CTE) test methods are reviewed, and the results and conclusions of the tests are given. The test methods have been utilized to describe the CTE characteristics of the Tektronix 1024 by 1024 CCD to optimize low dark current, low readout noise, and high CTE at low signal levels. CTE modelling is described, and three test methods are set forth and compared. The Fe-55 X-ray response method utilizes the response of a CCD to X-ray photons from the radioactive source Fe-55. The extended pixel edge response method employs the measurement of the charge lost to successive pixels by a known initial signal as it is shifted through the array. The charge injection method consists of charge injection through the output amplifier reset transistor. These measurements were performed on several devices with known CTEs. The CTEs are found to be in agreement for the three methods, making application and test requirements the principal criteria for their use.

Orbock, J. D.↗
DOE OSTI2023

Voltage-dependent excitation dynamics in UV-absorbing organic photovoltaics with efficient charge transfer exciton emission

Intermolecular charge-transfer excitons play a central role in determining the performance of organic solar cells as their voltage-dependent formation, dissociation, and recombination dynamics contribute to photocurrent generation, radiative/nonradiative voltage losses, and photovoltaic fill factor. Here, we explore the properties of brightly-emitting wide energy gap (>2 eV) charge transfer excitons by measuring the voltage-dependent photoluminescence, photocurrent, and ultrafast pump–probe transient absorption spectra of organic solar cells employing five UV-absorbing donor molecules that differ only by the length of the oligophenylene or acene group at their core. We find that organic solar cells with a strong correlation between their voltage-dependent photocurrent and charge-transfer exciton photoluminescence have low photovoltaic fill factors as they require voltage to facilitate efficient charge-transfer exciton dissociation. In contrast, solar cells that are efficient can readily generate charges without an applied field and have a separate population of tightly-bound charge-transfer excitons that are responsible for emission. Furthermore, considering that the sum of all excitation loss rates (i.e., recombination and charge extraction) must be equal to the excitation generation rate in the steady state, these voltage-dependent data allow us to solve for the voltage-dependent fate of all excitations in the solar cells and estimate upper and lower bounds for geminate and non-geminate recombination, respectively.

14 SOLAR ENERGY↗
NASA NTRS1991

A resistive-gate Al(0.3)Ga(0.7)As/GaAs 2DEG CCD with high charge-transfer efficiency at 1 GHz

The fabrication and performance of an Al(0.3)Ga(0.7)As/GaAs modulation-doped resistive-gate CCD are reported. The two-dimensional electron gas (2DEG) CCD, implemented as a 32-stage four-phase delay line, was tested at both low (1-13 MHz) and high (0.6-1.0 GHz) frequency. It exhibits a room-temperature charge-transfer efficiency (CTE) of better than 0.999 at clock frequencies from 10 MHz up to 1 GHz without a fat-zero signal and is limited by dark current below 10 MHz. The high-frequency test showed no CTE degradation up to 1-GHz operation. The CTE degraded at frequencies lower than approximately 5 MHz due to dark current. The charge-handling capability and minimum clock swing of the resistive-gate 2DEG CCD are calculated.

Song, J.-I.↗
DOE OSTI2023

Unidirectional Sidechain Engineering to Construct Dual‐Asymmetric Acceptors for 19.23 % Efficiency Organic Solar Cells with Low Energy Loss and Efficient Charge Transfer

Abstract Achieving both high open‐circuit voltage ( V oc ) and short‐circuit current density ( J sc ) to boost power‐conversion efficiency (PCE) is a major challenge for organic solar cells (OSCs), wherein high energy loss ( E loss ) and inefficient charge transfer usually take place. Here, three new Y‐series acceptors of mono‐asymmetric asy‐YC11 and dual‐asymmetric bi‐asy‐YC9 and bi‐asy‐YC12 are developed. They share the same asymmetric D 1 AD 2 (D 1 =thieno[3,2‐ b ]thiophene and D 2 =selenopheno[3,2‐ b ]thiophene) fused‐core but have different unidirectional sidechain on D 1 side, allowing fine‐tuned molecular properties, such as intermolecular interaction, packing pattern, and crystallinity. Among the binary blends, the PM6 : bi‐asy‐YC12 one has better morphology with appropriate phase separation and higher order packing than the PM6 : asy‐YC9 and PM6 : bi‐asy‐YC11 ones. Therefore, the PM6 : bi‐asy‐YC12‐based OSCs offer a higher PCE of 17.16 % with both high V oc and J sc , due to the reduced E loss and efficient charge transfer properties. Inspired by the high V oc and strong NIR‐absorption, bi‐asy‐YC12 is introduced into efficient binary PM6 : L8‐BO to construct ternary OSCs. Thanks to the broadened absorption, optimized morphology, and furtherly minimized E loss , the PM6 : L8‐BO : bi‐asy‐YC12‐based OSCs achieve a champion PCE of 19.23 %, which is one of the highest efficiencies among these annealing‐free devices. Our developed unidirectional sidechain engineering for constructing bi‐asymmetric Y‐series acceptors provides an approach to boost PCE of OSCs.

Chemistry↗
NASA NTRS2003

Redox-Active Star Molecules Incorporating the 4-Benzolypyridinium Cation: Implications for the Charge Transfer Efficiency Along Branches versus Across the Perimeter in Dendrimers

We report the redox properties of four star systems incorporating the 4-benzoyl-N-alkylpyridinium cation; the redox potential varies along the branches, but remains constant at fixed radii. Voltammetric analysis (cyclic voltammetry and differential pulse voltammetry) shows that only two of the three redox-active centers in the perimeter are electrochemically accessible during potential sweeps as slow as 20 mV/s and as fast as 10 V/s. On the contrary, both redox centers of a branch are accessible electrochemically within the same time frame. These results are discussed in terms of slow through-space charge transfer and the globular 3-D folding of the molecules.

Yang, Jin-Hua↗
DOE OSTI2020

Ultrafast terahertz spectroscopy provides insight into charge transfer efficiency and dynamics in artificial photosynthesis

Terahertz (THz) spectroscopy provides a noncontact method to measure the ultrafast dynamics and photoconductivity of mobile carriers in semiconducting materials. This has proven useful in studying artificial photosynthesis devices which use semiconductor photoelectrodes. In this work, we present a brief introduction to optical-pump THz-probe (OPTP) spectroscopy, a technique that provides unique and useful insight into interfacial electron transfer (from the surface-attached dye to the conduction band of the semiconductor) in dye-sensitized photoelectrochemical cells. Compared with more familiar methods like visible transient absorption spectroscopy, OPTP spectroscopy stands out in offering both sub-picosecond time resolution as well as sensitivity to mobile carriers (electrons and holes) in the semiconductor portion of artificial photosynthesis devices. The mobile carriers are crucial to device performance as only they pass to the other half cell to complete the reaction. In order to highlight these advantages and illustrate the types of questions OPTP spectroscopy can address, we discuss three case studies. In the first, OPTP spectroscopy is used to measure the injection rates from a set of six different dyes, revealing the effect of the energetics and lifetimes of the dye excited states on interfacial electron transfer. The subsequent case studies investigate the influence of varying the moieties which bind to the surface (anchors), as well as the moieties that connect the chromophore with these anchors (linkers). OPTP spectroscopy was used to measure the interfacial electron transfer rate as these moieties were varied.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2000

The Charge Transfer Efficiency and Calibration of WFPC2

A new determination of WFPC2 photometric corrections is presented, using HSTphot reduction of the WFPC2 Omega Centauri and NGC 2419 observations from January 1994 through March 2000 and a comparison with ground-based photometry. No evidence is seen for any position-independent photometric offsets (the "long-short anomaly"); all systematic errors appear to be corrected with the CTE and zero point solution. The CTE loss time dependence is determined to be very significant in the Y direction, causing time-independent CTE solutions to be valid only for a small range of times. On average, the present solution produces corrections similar to Whitmore, Heyer, & Casertano, although with an improved functional form that produces less scatter in the residuals and determined with roughly a year of additional data. In addition to the CTE loss characterization, zero point corrections are also determined as functions of chip, gain, filter, and temperature. Of interest, there are chip-to-chip differences of order 0.01 - 0.02 magnitudes relative to the Holtzman et al. calibrations, and the present study provides empirical zero point determinations for the non-standard filters such as the frequently-used F450W, F606W, and F702W.

Dolphin, Andrew E.↗
NASA NTRS2004

Comparison of the Proton-Induced Dark Current and Charge Transfer Efficiency Responses of N- and P-Channel CCDs

The proton-induced CTE behavior for the Lawrence Berkeley National Laboratory (LBNL) p-CCD (being developed for the Supernovae Acceleration Project (SNAP) and Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) n-CCDs were compared using 55Fe, EPER and FPR techniques. CTE performance of the p-CCD is about an order of magnitude better after a 63 MeV fluence of 2.5 x 10(sup 9)/sq cm, which is equivalent to 2.5 years in the shielded HST orbit. Notched n- and p-CCDs yielded factor of two improvement in CTE performance as compared to their un-notched versions. The introduction rate of hot pixels was greater in p-CCD as compared to n-CCD, and also greater in notched than un-notched devices.

Marshall, Cheryl↗
NASA NTRS1986

CCD advances for X-ray scientific measurements in 1985

A theoretical model is presented which predicts the output response of a CCD to soft X-ray spectra. The model simulates the four fundamental parameters that ultimately limit CCD performance: quantum efficiency, charge collection efficiency, charge transfer efficiency, and read noise. Simulated results are presented for a wide variety of CCD structures, and general conclusions are presented about achieving a practical balance of sensitivity, energy, and spatial resolution for an AXAF instrument. The results of the analysis are compared to an existing state-of-the art CCD and improvements which will be made in the near future are projected.

Janesick, James↗
DOE OSTI2021

Highly Efficient Surface Charge Transfer in Fe 2 TiO 5 Epitaxial Thin Film Photoanodes

Pseudobrookite (Fe 2 TiO 5 ) has attracted significant attention as an emerging photoanode for water oxidation due to reports of enhanced performance in polycrystalline heterostructures with α-Fe 2 O 3 or TiO 2 . However, the specific properties and contribution of Fe 2 TiO 5 remain unknown. Here, we present the first photoelectrochemical characterization of epitaxial thin film Fe 2 TiO 5 , an ideal platform for probing the inherent response of this earth-abundant photoanode for solar water splitting. Moreover, by using an electrolyte containing a hole scavenger, we find highly efficient charge transfer at the Fe 2 TiO 5 –electrolyte interface. This notable surface property is exploited in the form of an Fe 2 TiO 5 /α-Fe 2 O 3 heterostructure photoanode, for which we observe a photocurrent density increase by 1 order of magnitude and an onset potential improvement by ~300 mV. Establishing these fundamental properties elucidates the nature of reaction mechanisms on Fe 2 TiO 5 and informs the design of highly efficient water photo-oxidation devices by incorporating this material with other photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrafast hole transfer from monolayer ReS 2 to thin-film F 8 ZnPc

We report a combined experimental and computational study on the charge transfer properties of heterostructures formed by monolayer 1T’-ReS 2 and fluorinated zinc phthalocyanine, F 8 ZnPc. Two-dimensional (2D) ReS 2 monolayer flakes were exfoliated from bulk crystals, and a F 8 ZnPc film with a thickness of 4 nm was thermally deposited on ReS 2 . Density functional theory shows that the two materials form a type-II band alignment. In transient absorption measurements, photocarriers are selectively excited in ReS 2 and monitored in F 8 ZnPc. Here, we found that holes in ReS 2 can transfer to F 8 ZnPc on a time scale shorter than 0.35 ps. The transferred holes have a long lifetime in F 8 ZnPc on the order of 1 ns, confirming the lack of electron transfer. The efficient charge transfer from a 1T’ transition metal dichalcogenide monolayer to an organic semiconductor illustrates the feasibility of developing 2D/organic heterostructures with in-plane anisotropic electronic and optoelectronic properties.

2D materials↗
NASA NTRS1981

Virtual phase imager for Galileo

A CCD imaging array with a new virtual-phase technology that has been developed for use in a slow-scan imaging system for NASA's Galileo mission to Jupiter is described. Among its features are an absence of interlevel shorts, simplicity of fabrication, low dark current (less than 0.4 nA/sq cm), high full well, high quantum efficiency in the front side illumination mode, large dynamic range (greater than 5000), good charge transfer efficiency (0.99997), excellent linearity (0.2%), uniform pixel response (1%), and improved radiation hardness. It is noted that its operating voltages must be constrained to narrow windows to maintain good charge transfer efficiency and avoid the production of spurious and leakage charge.

Janesick, J. R.↗
NASA NTRS1976

A sub-nanosecond CCD

A 32-cell silicon n-channel PCCD was fabricated and tested for charge transfer efficiency versus transfer time. A charge transfer time of 550 picoseconds with a 0.9998 transfer efficiency was obtained when operated in the uni-phase mode. These conditions correspond to an operating rate of 900 MHz when operated as an analog data or digital device.

Chan, Y. T.↗
DOE OSTI2022

The impact of G-quadruplex dynamics on inter-tetrad electronic couplings: a hybrid computational study

The G-quadruplex is a fascinating nucleic acid motif with implications in biology, medicine, and nanotechnologies. G-quadruplexes can form in the telomeres at the edges of chromosomes and in other guanine-rich regions of the genome. They can also be engineered for exploitation as biological materials for nanodevices. Their higher stiffness and higher charge transfer rates make them better candidates in nanodevices than duplex DNA. For the development of molecular nanowires, it is important to optimize electron transport along the wire axis. One powerful basis to do so is by manipulating the structure, based on known effects that structural changes have on electron transport. Here, for this work, we investigate such effects, by a combination of classical simulations of the structure and dynamics and quantum calculations of electronic couplings. We find that this structure–function relationship is complex. A single helix shape parameter alone does not embody such complexity, but rather a combination of distances and angles between stacked bases influences charge transfer efficiency. By analyzing linear combinations of shape descriptors for different topologies, we identify the structural features that most affect charge transfer efficiency. We discuss the transferability of the proposed model and the limiting effects of inherent flexibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multi-amplifier Sensing Charge-coupled Devices for Next Generation Spectroscopy

We present characterization results and performance of a prototype Multiple-Amplifier Sensing (MAS) silicon charge-coupled device (CCD) sensor with 16 channels potentially suitable for faint object astronomical spectroscopy and low-signal, photon-limited imaging. The MAS CCD is designed to reach sub-electron readout noise by repeatedly measuring charge through a line of amplifiers during the serial transfer shifts. Using synchronized readout electronics based on the Dark Energy Spectroscopic Instrument CCD controller, we report a read noise of 1.03 e$^{−}$ rms pix$^{−1}$ at a speed of 26 μs pix$^{−1}$ with a single-sample readout scheme where charge in a pixel is measured only once for each output stage. At these operating parameters, we find the amplifier-to-amplifier charge transfer efficiency (ACTE) to be >0.9995 at low counts for all amplifiers but one for which the ACTE is 0.997. This charge transfer efficiency falls above 50,000 electrons for the read-noise optimized voltage configuration we chose for the serial clocks and gates. The amplifier linearity across a broad dynamic range from ∼300 to 35,000 e$^{−}$ was also measured to be ±2.5%. We describe key operating parameters to optimize on these characteristics and describe the specific applications for which the MAS CCD may be a suitable detector candidate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

A hybrid CoOOH-rGO/Fe 2 O 3 photoanode with spatial charge separation and charge transfer for efficient photoelectrochemical water oxidation

As a promising photoanode for photoelectrochemical (PEC) water oxidation, hematite (Fe 2 O 3 ) still suffers from poor charge mobility and serious charges recombination and sluggish surface oxygen evolution kinetics. Herein, a hybrid photoanode of cobalt (oxy)hydroxide coupled with reduced graphene oxide modified Fe 2 O 3 (CoOOH-rGO/Fe 2 O 3 ) is well crafted by a facile hydrothermal synthesis with a chelation-mediated in-situ growth method. Morphology characterizations indicate rGO forms the internal network among isolated Fe 2 O 3 and CoOOH nanosheets distribute on the terminal of Fe 2 O 3 , forming a spatial separated nanostructure. The resultant CoOOH-rGO/Fe 2 O 3 exhibits an obviously reduced onset potential of ca. 150 mV and a significantly enhanced photocurrent density of 2.56 mA cm -2 at 1.23 V, which is ca. 3.3 times higher than that of bare Fe 2 O 3 . Especially, the functions of rGO and CoOOH are studied by using electrochemical impedance spectroscopy, open circuit potentials and intensity modulated photocurrent spectroscopy. It is found rGO act as conductive network which facilitates the electron transfer from Fe 2 O 3 to the substrate, while CoOOH evidently passivate the surface states of Fe 2 O 3 , improve charge separation and provide catalytic active sites for water oxidation. Additionally, the spatial charge separation and charge transfer caused by CoOOH and rGO are responsible for the enhanced PEC performance of water oxidation. The rational design and the facile fabrication strategy exhibit great potential to be used for other PEC system with great efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗