Effect of Janus Balance and Shape Anisotropy on the Propulsion Dynamics of Active Colloidal Particles
Conference presentation at the annual meeting of the American Institute of Chemical Engineers
Young, Chih-Mei↗
SEARCH · Search NASA
Results for “Chemical Propulsion Engines”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Understanding the interplay between pilot fuel mixing and auto-ignition chemistry in hydrogen-enriched environment
The diesel-piloted dual-fuel compression ignition combustion strategy is well-suited to accelerate the decarbonization of transportation by adopting hydrogen as a renewable energy carrier into the existing internal combustion engine with minimal engine modifications. Despite the simplicity of engine modification, many questions remain unanswered regarding the optimal pilot injection strategy for reliable ignition with minimum pilot fuel consumption. The present study uses a single-cylinder heavy-duty optical engine to explore the phenomenology and underlying mechanisms governing the pilot fuel ignition and the subsequent combustion of a premixed hydrogen-air charge. The engine is operated in a dual-fuel mode with hydrogen premixed into the engine intake charge with a direct pilot injection of n-heptane as a diesel pilot fuel surrogate. Optical diagnostics used to visualize in-cylinder combustion phenomena include high-speed IR imaging of the pilot fuel spray evolution as well as high-speed HCHO* and OH* chemiluminescence as indicators of low-temperature and high-temperature heat release, respectively. Three pilot injection strategies are compared to explore the effects of pilot fuel mass, injection pressure, and injection duration on the probability and repeatability of successful ignition. The thermodynamic and imaging data analysis supported by zero-dimensional chemical kinetics simulations revealed a complex interplay between the physical and chemical processes governing the pilot fuel ignition process in a hydrogen containing charge. Hydrogen strongly inhibits the ignition of pilot fuel mixtures and therefore requires longer injection duration to create zones with sufficiently high pilot fuel concentration for successful ignition. Results show that ignition typically tends to rely on stochastic pockets with high pilot fuel concentration, which results in poor repeatability of combustion and frequent misfiring. In conclusion, this work has improved the understanding on how the unique chemical properties of hydrogen pose a challenge for maximization of hydrogen’s energy share in hydrogen dual-fuel engines and highlights a potential mitigation pathway.
33 ADVANCED PROPULSION SYSTEMS↗
CubeSat Interplanetary Exploration: A Deep Dive into Nuclear Propulsion and Astrodynamics for Small Satellites
CubeSats are small satellites most commonly used by universities, however, nowadays places like NASA are looking to CubeSats for interplanetary missions. Because of their universal form fit it makes them cost effective, economical, and therefor desirable for deep space. To achieve deep space exploration, we must explore the applications of propulsion and astrodynamics on small satellites. This paper will touch on one scaling Ion and chemical propulsion as well as nuclear kilo reactors. Two choreographing a flight path for these small satellites and lastly designing an efficient cost-effective platform for CubeSats to get to deep space territory.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Flame kinetics at scramjet-engine-relevant conditions: Role of prompt dissociation of weakly-bound radicals
Combustion in high-speed ram-based propulsion engines occurs under distinct thermodynamic conditions of high reactant temperatures (greater than 1000 K) and relatively low pressures (<5 atm). There is a lack of fundamental flame measurements at such conditions that result in adiabatic flame temperatures (T ad ) exceeding 2500 K. In this work, we have measured laminar flame speeds of oxygen-enriched CH 4 /oxidizer mixtures at sub-atmospheric conditions to probe kinetics at high T ad using the isobaric spherically expanding flame approach. Simulations with recent kinetic models revealed increasing differences between data and model predictions with increasing T ad , reaching up to 25 %. Kinetic analyses reveal that at the thermodynamic conditions in these O 2 -enriched flames, i.e., lower pressures and higher T ad , the effects of HCO prompt dissociation are accentuated. In addition to HCO, the prompt dissociations of CH 2 OH and C 2 H 5 are also considered. Here, the prompt dissociations of all three radicals were evaluated and their effects considered in flame speed simulations. Reaction path analysis for the present flames revealed that approximately half of the reaction flux for HCO formation undergoes prompt dissociation to H + CO. Furthermore, these analyses also revealed that the pathways and sensitive reactions are similar between oxygen-enriched fuel/oxidizer mixtures and preheated fuel/air mixtures, if both have similar T ad . Thus, flames of oxygen-enriched mixtures could be a surrogate to probe the flame chemistry of highly preheated mixtures at relatively low pressures that are often encountered in ram-based propulsion engine combustors.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
An experimental and numerical investigation of HD diesel engine DOC efficiency in oxidizing NO to NO 2
Reducing pollutant emissions from heavy-duty (HD) diesel engines is critical due to their significant environmental impact, particularly concerning NOx emissions. Understanding and optimizing modern diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) performance is essential for improving exhaust aftertreatment (EAT) system efficiency to meet stringent emissions regulations. The oxidation of nitric oxide (NO) to nitrogen dioxide (NO 2 ) in DOC plays a key role in improving SCR efficiency in reducing NO x . This study investigates the DOC performance in oxidizing NO to NO2 and its impact on the SCR efficiency of a 2021 MY Navistar E39 HD diesel engine. The influence of engine speed, load, exhaust gas temperature, and composition on DOC efficiency is experimentally investigated. The relationships between DOC inlet temperature, oxygen availability and NO 2 /NO x ratio at the DOC inlet are examined to better understand their effects on the overall DOC efficiency. The results indicate that DOC NO oxidation efficiency is highly dependent on exhaust temperature, with optimal oxidation occurring within a specific temperature range (275-350°C). Below this threshold, the chemical reactions are kinetically limited, while at higher temperatures, thermodynamic constraints reduce the efficiency of DOC in oxidizing NO to NO 2 . The experimental data further reveal that the NO 2 /NO x ratio peaks at medium loads before declining at higher loads due to reduced residence time and mass transfer effects. Additionally, the SCR NO x conversion efficiency is significantly influenced by the NO 2 /NO x ratio, achieving peak performance when the NO 2 /NO x ratio approaches 0.5. A DOC chemistry model was developed and validated against the experimental data to predict DOC oxidation behavior under various operating conditions. The findings of this study provide insights into the interdependencies between DOC and SCR performance, contributing to the optimization of SCR systems for optimized NOx reduction.
33 ADVANCED PROPULSION SYSTEMS↗
Propulsion of synthetic protocells and coacervates driven by biochemical catalysis
An important area in the design of biomolecular materials is the mimicry of cellular function through the assembly of molecular components into synthetic cells, or protocells. Through compartmentalization and subsequent evolution, biological cells have achieved the goals of specificity, amplification, and response. By assembling cell-like structures that mimic the organization and size of a natural cell but that incorporate novel components and respond to synthetic triggers, we can extend their capabilities beyond what is currently achievable in biology. For applications in energy, these include the ability to convert chemical to mechanical energy, and to enable the response of sensors and responders once a threshold has been reached. This technical report summarizes progress made on this project as of Dec 31, 2023.
36 MATERIALS SCIENCE↗
Aviation Fuel Characterization at Operationally Relevant Conditions
To accelerate approval and potentially expand the allowable property range for aviation fuels, we are using high performance computing simulations to reveal fuel property effects on aviation combustor performance. These simulations are supported by fuel property measurements over temperatures and pressures that the fuel experiences in an aircraft engine and by validated chemical kinetics models for SAF combustion. Here we report density, viscosity, and surface tension results for conventional jet fuel and multiple synthetic fuels from -30 degrees Celsius to 200 degrees Celsius (-40 degrees Celsius for viscosity) and 1 atm to 70 atm including an assessment of method repeatability. Properties of surrogate mixtures are also investigated. Distillation, ICN, LHV, flashpoint, and Cp are also reported, and data are being used to develop models to predict fuel properties from composition (GCxGC).
33 ADVANCED PROPULSION SYSTEMS↗
Co-optimization of fuel properties, combustion system geometry, and injection strategy for conventional diesel fuel
Here, studies have shown that fuel properties can impact an engine’s operation in several ways, including ignition delay, sooting tendency, mixture formation, and combustion temperature. In mixing-controlled compression ignition (MCCI) engines, the fuel system design and piston bowl geometry significantly affect combustion performance and emissions. Based on current information, it is difficult to draw conclusions about fuel property effects and sensitivities. The central fuel hypothesis approach used in the US Department of Energy Co-Optima program has worked well for spark ignition fuels: identifying critical fuel property ranges is sufficient to screen fuel blends that are expected to maximize efficiency and reduce pollutant emissions. However, for MCCI-relevant fuels, the information gained from past studies is not sufficient to build such a merit function or to allow for performing a similar screening of fuel blends. It is hypothesized that a co-optimization of a fuel’s physical and chemical properties, combustion system geometry, and injection strategy could leverage synergies between the effects of the fuel properties and geometries, resulting in improved performance over state-of-the-art. A machine learning–assisted unconstrained global optimization algorithm was used to explore a design space comprising 23 independent variables. The results show that physical property effects were minimal even for large variations in fuel properties, and the only interaction effect that was observed was the effect of varied fuel density parameters on fuel/air mixture formation. Nevertheless, these interactions were not sufficient in magnitude to significantly affect optimization results. Therefore, analysis of the results suggests that fuel physical properties cannot be leveraged in a co-optimization context to increase engine efficiency.
33 ADVANCED PROPULSION SYSTEMS↗
Earth's Energy Imbalance More Than Doubled in Recent Decades
Abstract Global warming results from anthropogenic greenhouse gas emissions which upset the delicate balance between the incoming sunlight, and the reflected and emitted radiation from Earth. The imbalance leads to energy accumulation in the atmosphere, oceans and land, and melting of the cryosphere, resulting in increasing temperatures, rising sea levels, and more extreme weather around the globe. Despite the fundamental role of the energy imbalance in regulating the climate system, as known to humanity for more than two centuries, our capacity to observe it is rapidly deteriorating as satellites are being decommissioned.
Mauritsen, Thorsten [Department of Meteorology and↗