Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical initiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Initiated chemical vapor deposition polymers for high peak-power laser targets

Here, we report two examples of initiated chemical vapor deposition (iCVD) polymers being developed for use in laser targets for high peak-power laser systems. First, we show that iCVD poly(divinylbenzene) is more photo-oxidatively stable than the plasma polymers currently used in laser targets. Thick layers (10–12 μm) of this highly crosslinked polymer can be deposited with near-zero intrinsic film stress. Second, we show that iCVD epoxy polymers can be crosslinked after deposition to form thin adhesive layers for assembling precision laser targets. The bondlines can be made as thin as ~ 1 μm, approximately a factor of 2 thinner than achievable using viscous resin-based adhesives. These bonds can withstand downstream coining and stamping processes.

36 MATERIALS SCIENCE↗

Effect of transition metal salts on the initiated chemical vapor deposition of polymer thin films

In this work, the effect of transition metal salts on the initiated chemical vapor deposition of polymer thin films was studied using x-ray photoelectron spectroscopy. The polymerizations of 4-vinyl pyridine and 1H,1H,2H,2H-perfluorodecyl acrylate were studied using copper(II) chloride (CuCl{sub 2}) and iron(III) chloride (FeCl{sub 3}) as the transition metal salts. It was found that the surface coverages of both poly(4-vinyl pyridine) (P4VP) and poly(1H,1H,2H,2H-perfluorodecyl acrylate) were decreased on CuCl{sub 2}, while the surface coverage of only P4VP was decreased on FeCl{sub 3}. The decreased polymer surface coverage was found to be due to quenching of the propagating radicals by the salt, which led to a reduction of the oxidation state of the metal. The identification of this reaction mechanism allowed for tuning of the effectiveness of the salts to decrease the polymer surface coverage through the adjustment of processing parameters such as the filament temperature. Additionally, it was demonstrated that the ability of transition metal salts to decrease the polymer surface coverage could be extended to the fabrication of patterned cross-linked coatings, which is important for many practical applications such as sensors and microelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular fouling resistance of zwitterionic and amphiphilic initiated chemically vapor-deposited (iCVD) thin films

Biofouling is a universal problem in various applications ranging from water purification to implantable biomedical devices. Recent advances in surface modification have created a rich library of antifouling surface chemistries, many of which can be categorized into one of the two groups: hydrophilic surfaces or amphiphilic surfaces. We report the straightforward preparation of antifouling thin film coatings in both categories via initiated chemical vapor deposition. A molecular force spectroscopy-based method is demonstrated as a rapid and quantitative assessment tool for comparing the differences in antifouling characteristics. The fouling propensity of single molecules, as opposed to bulk protein solution or bacterial culture, is assessed. This method allows for the interrogation of molecular interaction without the complication resulted from protein conformational change or micro-organism group interactions. The molecular interaction follows the same trend as bacterial adhesion results obtained previously, demonstrating that molecular force probe is a valid method for the quantification and mechanistic examination of fouling. In addition, the molecular force spectroscopy-based method is able to distinguish differences in antifouling capability that is not resolvable by traditional static protein adsorption tests. To lend further insight into the intrinsic fouling resistance of zwitterionic and amphiphilic surface chemistries, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, advancing and receding water contact angles, and atomic force microscopy are used to elucidate the film properties that are relevant to their antifouling capabilities.

Yang, R↗

Initiated chemical vapor deposited nanoadhesive for bonding National Ignition Facility's targets

Currently, the target fabrication scientists in National Ignition Facility Directorate at Lawrence Livermore National Laboratory (LLNL) is studying the propagation force resulted from laser impulses impacting a target. To best study this, they would like the adhesive used to glue the target substrates to be as thin as possible. The main objective of this research project is to create adhesive glue bonds for NIF’s targets that are ≤ 1 μm thick. Polyglycidylmethacrylate (PGMA) thin films were coated on various substrates using initiated chemical vapor deposition (iCVD). Film quality studies using white light interferometry reveal that the iCVD PGMA films were smooth. The coated substrates were bonded at 150 °C under vacuum, with low inflow of Nitrogen. Success in bonding most of NIF’s mock targets at thicknesses ≤ 1 μm indicates that our process is feasible in bonding the real targets. Key parameters that are required for successful bonding were concluded from the bonding results. They include inert bonding atmosphere, sufficient contact between the PGMA films, and smooth substrates. Average bond strength of 0.60 MPa was obtained from mechanical shearing tests. The bonding failure mode of the sheared interfaces was observed to be cohesive. Future work on this project will include reattempt to bond silica aerogel to iCVD PGMA coated substrates, stabilize carbon nanotube forests with iCVD PGMA coating, and kinetics study of PGMA thermal crosslinking.

36 MATERIALS SCIENCE↗

New Lab-Funded Initiative in Chemical Transformations

The Chemical Transformations Initiative (CTI) has been launched at Pacific Northwest National Laboratory! The CTI is funded through the Laboratory Directed Research and Development (LDRD) program as a lab-level initiative to develop foundational capabilities at Pacific Northwest National Laboratory (PNNL) for chemical conversion processes having minimal or no environmental impact.

Mueller, Karl T.↗

UQ4QM: Uncertainty Quantification for Quantum Materials (Chemical Dynamics Initiative Final Report)

The Uncertainty Quantification for Quantum Materials (UQ4QM) LDRD project focused on developing solutions for strategic two project areas the Chemical Dynamics Initiative (CDi) Use Case 3. This included data-driven approaches toward understanding heterogeneous data, such as multi-fidelity data or data with unknown spatial or temporal perturbations. The applications were varied but the project aims pursued solutions which were amenable to common UQ approaches in order to maximize impact.

36 MATERIALS SCIENCE↗

Ultrathin and Conformal Initiated Chemical-Vapor-Deposited Layers of Systematically Varied Surface Energy for Controlling the Directed Self-Assembly of Block CoPolymers

Directed self-assembly (DSA) of block copolymer (BCP) thin films is a promising approach to enable next-generation patterning at increasingly smaller length scales. DSA utilizes interfacial wetting layers to force the BCP domains to self-assemble with the desired orientation with respect to the substrate. Here, we demonstrate that initiated chemical-vapor-deposited (iCVD) polydivinylbenzene (pDVB) ultrathin films can direct the self-assembly of poly(styrene-block-methylmethacrylate). Here, we found that the methyl radicals formed at increased filament temperatures during the iCVD process result in the backbone methylation of pDVB. By tuning the degree of backbone methylation, we systematically changed the wetting properties of the iCVD pDVB from a slight poly(methylmethacrylate) preference to complete poly(styrene) preference. Additionally, we utilize the conformal nature of the iCVD to form a wetting layer over a topographical line and space pattern, which is subsequently used to produce self-assembled BCP films with both perpendicular orientation and long-range alignment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large-scale Additive Manufacturing of Highly Exothermic Reactive Polymer Systems

Additive manufacturing (AM) of reactive polymer systems involves the deposition of materials at room temperature that either cure during printing through a chemically initiated reaction or require thermal initiation after printing. This presentation focuses on large-scale AM of chemically initiated thermosetting resins to characterize the effects of heat generation, temperature-dependent viscoelasticity, and crosslinking on the printing process. Real-time tracking of both temperature and cure fronts during the build process were investigated using infrared (IR) and optical vision systems in combination with selected material dyes. Heat generation within the previously-deposited layers was observed to cause significant reduction in the storage modulus (G’) and viscosity of newly-deposited layers, resulting in bead instabilities and failure of the print. Quantitative experimental observations on thin-wall structures suggest strategies for mitigating this failure mode through selection of print parameters and tailoring of viscoelastic properties of the feedstock resin.

Romberg, Stian↗

Extended Lagrangian Born-Oppenheimer molecular dynamics simulations of the shock-induced chemistry of phenylacetylene

The initial chemical events that occur during the shock compression of liquid phenylacetylene have been investigated using self-consistent tight binding molecular dynamics simulations. The extended Lagrangian Born-Oppenheimer molecular dynamics formalism enabled us to compute microcanonical trajectories with precise conservation of the total energy. Our simulations revealed that the first density-increasing step under shock compression arises from the polymerization of phenylacetylene molecules at the acetylene moiety. The application of electronic structure-based molecular dynamics with long-term conservation of the total energy enabled us to identify electronic signatures of reactivity via monitoring changes in the HOMO-LUMO gap, and to capture directly adiabatic shock heating, transient non-equilibrium states, and changes in temperature arising from exothermic chemistry in classical molecular dynamics trajectories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recycling Epoxy by Vitrimerization: Influence of an Initial Thermoset Chemical Structure

Epoxy/anhydride cured thermosets are widely used in aerospace and wind energy structures. Recycling the enormous amounts of epoxy thermoset waste remains a global challenge. Vitrimerization, a practical, low-cost, eco-friendly and scalable method was developed for closed-loop recycling of the crosslinked epoxy by converting the permanent network into a vitrimer type dynamic network. Here we study the effect of virgin epoxy network properties on network reforming efficiency and the activation energy of the dynamic network by varying the epoxy/anhydride ratio. The results point out that the permanent network crosslink density and glass transition temperature have a more pronounced effect on vitrimerization efficiency by comparison with the concentration of free hydroxyl groups in the system. Furthermore, the result can be potentially used to better control vitrimerization efficiency in recycling epoxy thermoset polymers and tailor the vitrimerized products properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitivity Tests of Aluminum Precipitate Preparation Methods on Head Loss through Debris Beds on a Sump Screen

During a Loss-of-Coolant Accident (LOCA) in Pressurized Water Reactors (PWRs), buffered borated water as a coolant from the Refueling Water Storage Tank (RWST) will be injected into the primary loop to cool down the core depending on the break size. For long-term cooling, the coolant will be collected in the containment sump. Then, the Emergency Core Cooling System (ECCS) will pump the coolant through the sump strainers into the reactor. During this phase, buffered borated water produces chemical precipitate by reacting with the structural materials in the containment. Chemical effects evaluated as part of Generic Safety Issue 191 (GSI-191) resolution studies are broadly defined as any chemically induced phenomenon that affects ECCS performance. Initial chemical effects studies jointly sponsored by the Nuclear Regulatory Commission (NRC) and Industry collaborators led to a Westinghouse Owners Group (WOG) study that provided bases for deterministic quantification of chemical effects. The WCAP-16530-NP developed protocols to produce Aluminum Oxyhydroxide (AlOOH), Calcium Phosphate, and Sodium Aluminum Silicate (SAS). The surrogate generation protocol used the metal salt (aluminum nitrate and calcium acetate) unlike post-LOCA accident scenarios where metals leach into a buffered borated solution. Bahn et al. demonstrated that the WCAP-16530-NP SAS precipitate did not produce as much head loss as the WCAP-16530-NP AlOOH precipitate, thus, the present study focused on the effect of AlOOH precipitate on head loss through a fibrous debris bed. In the past, most of the tests were conducted in high approach velocity conditions, approximately 0.03 m/s. After modifications of sump strainer size in PWRs, the approach velocity to the sump strainer was reduced by an order of magnitude, approximately 0.001 ∼ 0.003 m/s. Howe et al. and Kim et al. conducted several head loss tests at the approach velocity of 0.003 m/s. In the present study, an approach velocity of 0.0006 m/s was selected for an extremely slow power plant condition. A PCI strainer design was used as previous head loss tests and debris bypass tests conducted by Lee et al. Three different chemical precipitate preparation methods were used in this study. The additional head loss of the debris bed caused by those chemical precipitates was investigated. The debris bed was produced with NUKON{sup R} fiberglass thermal insulator and additional particulates including dirt, Tin powder, acrylic powder, and Calcium silicate (CalSil). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Large-scale reactive thermoset printing: Complex interactions between temperature evolution, viscosity, and cure shrinkage

Thermoset composites are strong candidates for large-scale material extrusion additive manufacturing (AM). However, uncured thermoset composites become unstable as print height increases. Here, chemical initiation of vinyl ester immediately before deposition was used to suppress collapse and enable large-scale thermoset printing. Structural stability was assessed by printing thin walls at various layer times and monitoring thermal gradients with an infrared camera. Stable printing was observed at a layer time of 4.50 min, approximately half the gel time of the material (8 min). Self-weight collapse occurred at short layer time (0.68 min), whereas warpage occurred at long layer time (6.50 min). Here, a new behavior was discovered at intermediate layer time (2.25 min) where the heat generated by the reaction causes new, un-gelled layers to flow. Forced convection eliminates this behavior, stabilizing the 2.25-min layer time print. These findings motivated development of a less exothermic material system, which was used to print a large-scale mold and demonstrate the value of this understanding. By presenting these challenges of large-scale reactive thermoset AM for the first time, this work motivates focused studies of the complex interplay between rheological, thermal, and chemical behaviors to improve the feasibility of large-scale thermoset AM. Tensile properties of the printed material were also measured. Longitudinal and transverse elastic moduli are 3.79 and 2.95 GPa, respectively, and corresponding tensile strengths are 36.11 and 18.83 MPa. The glass transition temperature is 93.13 °C.

36 MATERIALS SCIENCE↗

A CHEMICAL VIEW OF PROTOSTELLAR-DISK FORMATION IN L1527

Subarcsecond images of the rotational line emissions of CCH, CS, H{sub 2}CO, and CH{sub 3}OH have been obtained toward the low-mass protostar IRAS 04368+2557 in L1527 as one of the early science projects of the Atacama Large Millimeter/submillimeter Array. The intensity distributions of CCH and CS show a double-peaked structure along the edge-on envelope with a dip toward the protostar position, whereas those of H{sub 2}CO and CH{sub 3}OH are centrally peaked. By analyzing the position-velocity diagrams along the envelope, CCH and CS are found to reside mainly in the envelope, where the gas is infalling with conservation of its angular momentum. They are almost absent inward of the centrifugal barrier (a half of the centrifugal radius). Although H{sub 2}CO exists in the infalling rotating envelope, it also resides in the disk component inside the centrifugal barrier to some extent. On the other hand, CH{sub 3}OH seems to exist around the centrifugal barrier and in the disk component. Hence, the drastic chemical change occurs at the centrifugal barrier. A discontinuous infalling motion as well as the gas-grain interaction would be responsible for the chemical change. This result will put an important constraint on initial chemical compositions for chemical evolution of protostellar disks.

79 ASTRONOMY AND ASTROPHYSICS↗

A survey of deuterated ammonia in the Cepheus star-forming region L1251

ABSTRACT Understanding the chemical processes during starless core and prestellar core evolution is an important step in understanding the initial stages of star and disc formation. This project is a study of deuterated ammonia, o-NH2D, in the L1251 star-forming region towards Cepheus. Twenty-two dense cores (20 of which are starless or prestellar, and two of which have a protostar), previously identified by p-NH3 (1,1) observations, were targeted with the 12m Arizona Radio Observatory telescope on Kitt Peak. o-NH2D J$_{\rm {K_a} \rm {K_c}}^{\pm } =$$1_{11}^{+} \rightarrow 1_{01}^{-}$ was detected in 13 (59 per cent) of the NH3-detected cores with a median sensitivity of $\sigma _{T_{mb}} = 17$ mK. All cores detected in o-NH2D at this sensitivity have p-NH3 column densities >1014 cm−2. The o-NH2D column densities were calculated using the constant excitation temperature (CTEX) approximation while correcting for the filling fraction of the NH3 source size. The median deuterium fraction was found to be 0.11 (including 3σ upper limits). However, there are no strong, discernible trends in plots of deuterium fraction with any physical or evolutionary variables. If the cores in L1251 have similar initial chemical conditions, then this result is evidence of the cores physically evolving at different rates.

79 ASTRONOMY AND ASTROPHYSICS↗