Search NASA⌕ Search

SEARCH · Search NASA

Results for “Co3O4”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Co3O4 by Materials Project

Co3O4 is Hausmannite structured and crystallizes in the cubic Fd-3m space group. The structure is three-dimensional. there are two inequivalent Co+2.67+ sites. In the first Co+2.67+ site, Co+2.67+ is bonded to six equivalent O2- atoms to form CoO6 octahedra that share corners with six equivalent CoO4 tetrahedra and edges with six equivalent CoO6 octahedra. All Co–O bond lengths are 1.93 Å. In the second Co+2.67+ site, Co+2.67+ is bonded to four equivalent O2- atoms to form corner-sharing CoO4 tetrahedra. The corner-sharing octahedral tilt angles are 59°. All Co–O bond lengths are 1.96 Å. O2- is bonded to four Co+2.67+ atoms to form a mixture of distorted edge and corner-sharing OCo4 trigonal pyramids.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Engineering CoO x ‑Based Self-Supported Anodes for Pure-Water-Fed Anion-Exchange-Membrane Electrolysis

Commercial membrane electrolyzers rely on acidic fluorocarbon membranes and ionomers, requiring the use of expensive IrO x -based oxygen-evolution catalysts. Anion-exchange-membrane water electrolyzers (AEMWEs) operate in an alkaline environment, enabling the use of non-precious-metal catalysts. Here, we study and engineer CoO x -based catalyst-coated anodes deposited via hydrothermal synthesis directly onto porous transport layers both with and without thermal annealing. The self-supported, nanoneedle-structured Co3O4 anode, formed by annealing the as-synthesized cobalt carbonate hydroxide, Co­(CO3) x (OH) y , outperforms the baseline Co3O4 nanoparticle ink-based anode in pure-water-fed AEMWE due to the improved catalyst-layer continuity and thus number of electroactive Co species. The as-synthesized and unannealed Co­(CO3) x (OH) y , however, appears to undergo substantial conversion to a more-active CoO x (OH) y phase predominantly at the surface, with nominal Co3+ present and higher electrical conductivity, lowering the cell voltage to ∼200 mV at 1.0 A·cm–2 in pure-water-fed AEMWE compared to the conventional Co3O4 nanoparticle anodes. We analyze the differences in electrode electrochemical response between pure-water and KOH feed modes, finding distinct activation and degradation modes. The Co­(CO3) x (OH) y anode shows significant activation and slower degradation linked to the conversion to oxyhydroxide. We propose catalyst layer designs that promote both hydroxide and electron transport, alongside interfacial engineering strategies to obtain high performance while mitigating anode degradation.

anion-exchange-membrane water electrolysis↗
DOE OSTI2021

Li2O-Based Cathode Additives Enabling Prelithiation of Si Anodes

Low first-cycle Coulombic efficiency is especially poor for silicon (Si)-based anodes due to the high surface area of the Si-active material and extensive electrolyte decomposition during the initial cycles forming the solid electrolyte interphase (SEI). Therefore, developing successful prelithiation methods will greatly benefit the development of lithium-ion batteries (LiBs) utilizing Si anodes. In pursuit of this goal, in this study, lithium oxide (Li2O) was added to a LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode using a scalable ball-milling approach to compensate for the initial Li loss at the anode. Different milling conditions were tested to evaluate the impact of particle morphology on the additive performance. In addition, Co3O4, a well-known oxygen evolution reaction catalyst, was introduced to facilitate the activation of Li2O. The Li2O + Co3O4 additives successfully delivered an additional capacity of 1116 mAh/gLi2O when charged up to 4.3 V in half cells and 1035 mAh/gLi2O when charged up to 4.1 V in full cells using Si anodes.

25 ENERGY STORAGE↗
NASA NTRS1987

DC electrical, thermal, and spectroscopic properties of various condensation polyimides containing surface cobalt oxide

Doping polyimides with cobalt ion causes the room temperature direct current electrical resistivity to decrease relative to the polymer alone, the reduction being most pronounced for the air-side of the cobalt modified polyimides. At a constant electrical field, resistivity for the volume, air-side and glass-side modes decreases yet further with an increase in temperature as expected for semiconductors and insulators. X-ray photoelectron spectroscopy indicates the air-side of the cobalt modified polyimides is predominantly Co3O4. The bulk resistivity of the air-side and activation energy of conduction for this surface are comparable to high purity sintered Co3O4. Charging characteristics at room temperature indicate a substantial polymer matrix contribution to both the glass-side and volume mode measurements but a negligible contribution to the air-side electrical properties. Volume electrical resistivity for similar additive levels is reduced by increasing the molecular flexibility of the host polymer.

Rancourt, J. D.↗
DOE OSTI2024

Understanding the Origin of Negative Temperature Dependence and Activity of N-Coordinated Cobalt Sites During Ethylene Dimerization

The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spin-Polarized Oxygen Evolution Reaction Enabled by Chiral Molecules Coupled with Ferromagnetic Electrocatalysts

The discovery of chirality-induced spin selectivity (CISS) revolutionized our understanding of the capabilities of chiral molecules, revealing that chiral molecules can function as spin filters, aligning the spin orientation of electrons when they transmit through them. Recently, CISS has been exploited to direct energy conversion, especially the oxygen evolution reaction (OER). However, despite the remarkable progress that has been achieved, the effect of CISS in influencing the intermediate species formation and changing the rate-determining step (RDS) is still vague. To understand those key reaction mechanism steps, electrocatalysts with distinct magnetic characteristics, ferromagnetic CoFe2O4 and paramagnetic Co3O4, were synthesized. The results show that spin-polarized charge carriers retain their spin alignment when coupled with ferromagnetic CoFe2O4, akin to the behavior observed under a magnetic field. The Tafel analysis and kinetic isotope studies (kinetic isotope effect) suggest that in the absence of chiral molecules, the initial electron transfer step, the formation of O* species, governs the rate-determining step (RDS). However, introducing chiral molecules shifts the RDS to a combination of the first and second electron transfers, leading to the formation of OOH*. This conclusion was further supported by in situ infrared spectroscopy, which shows that l-methionine-modified CoFe2O4 (l-CoFe2O4) promotes the formation of OOH*, a key intermediate for O2 generation. This study highlights the critical role of CISS in affecting the OER mechanism and intermediate species formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

PhaseT3M: 3D imaging at 1.6 Å resolution via electron cryo-tomography with nonlinear phase retrieval

Electron cryo-tomography (cryo-ET) enables 3D imaging of complex, radiation-sensitive structures with molecular detail. However, image contrast from the interference of scattered electrons is nonlinear with atomic density and multiple scattering further complicates interpretation. These effects degrade resolution, particularly in conventional reconstruction algorithms, which assume linearity. Particle averaging can reduce such issues but is unsuitable for heterogeneous or dynamic samples ubiquitous in biology, chemistry, and materials sciences. Here, we develop a phase retrieval-based cryo-ET method, PhaseT3M. We experimentally demonstrate its application to an approximately 7 nm Co3O4 nanoparticle on an approximately 30 nm carbon substrate, achieving a maximum resolution of 1.6 Å, surpassing conventional limits using standard cryo-TEM equipment. PhaseT3M uses a multislice model for multiple scattering and Bayesian optimization for alignment and computational aberration correction, with a positivity constraint to recover ‘missing wedge’ information. Applied directly to biological particles, it enhances reconstruction quality and reduces artifacts, establishing a standard for routine 3D imaging with phase contrast.

Biophysics↗
NASA NTRS1986

Hydrazine reduction of transition metal oxides - In situ characterization using X-ray photoelectron spectroscopy

The transition metal oxides (TMOs) V2O5, FeO3, Co3O4, NiO, CuO, and ZnO were exposed to hydrazine at various pressures. The metallic surfaces were surveyed by in situ X-ray photoelectron spectroscopy to determine the irrelative rate of reduction by hydrazine. The most easily reducible oxide, CuO, could be reduced to the metallic state at room temperature and 10 to the -6th torr. The reaction is first order with respect to CuO, with an activation energy of about 35 kJ/mol. Two types of adsorption were seen to occur at 295 K: (1) a reversible component in which the measured N:Cu ratio increased to 0.60 at hydrazine pressures up to 0.5 torr, and (2) an irreversible component, with a N:Cu ratio of 0.28, which could not be removed by extended vacuum pumping. The results of this study are useful for the identification of TMO's that can be used as solid neatallizers of hydrazine spills, and for the preparation of metal surfaces for electroplating and evaporative thin-film coating.

Littrell, D. M.↗
NASA NTRS1986

The formation of volatile corrosion products during the mixed oxidation-chlorination of cobalt at 650 C

The reaction of cobalt with 1 pct Cl2 in 1, 10, and 50 pct O2/Ar atmospheres has been studied at 650 C with thermogravimetry and mass spectrometry. The principal vapor species appear to be CoCl2 and CoCl3. In all cases, CoCl2(s) forms at the oxide/metal interface and equilibration of the volatile chlorides with Co3O4 does not occur in the early stages of the reaction. In the 1 pct Cl2 1 pct O2-Ar case, continuous volatilization occurs. In the 1 pct Cl2-10 pct O2-Ar and 1 pct CL2-50 pct O2-Ar cases, volatilization occurs only in the first few minutes of reaction. Afterwards, the reaction is predominantly oxidation.

Jacobson, N. S.↗
NASA NTRS1987

Phase purity of NiCo2O4, a catalyst candidate for electrolysis of water

NiCo2O4 is shown to be difficult to obtain as a pure phase, and may never have been so obtained. High resolution x-ray diffractometry is required for its precise characterization. Film XRD is not likely to show the asymmetry in the spinel diffraction lines, caused by poorly crystallized NiO, as seen in diffractometer traces. The Co3O4 which is expected to accompany NiO as an impurity in NiCo2O4 syntheses has the same diffraction pattern as the binary oxide. Firings of the co-precipitated hydroxides at 300, 350, and 400 C, including one in pure O2, failed to produce single phase cobaltate. Scanning electron microscopy showed all the sintered products to range over several orders of magnitude in agglomerate/particle size. Surface areas by BET were all in the range 40 to 110 m sq/g, equivalent to particles of 200 to 100 Angstrom diameter. The spinel diffraction line breadths were compatible with those approximate dimensions.

Singer, J.↗
NASA NTRS1988

Polyimide/metal composite films via in situ decomposition of inorganic additives - Soluble polyimide versus polyimide precursor

Polyimide-metal oxide (Co3O4 or CuO) composite films have been prepared via in situ thermal decomposition of cobalt (II) chloride or bis(trifluoroacetylacetonato)copper(II). A soluble polyimide (XU-218) and its corresponding prepolymer (polyamide acid) were individually employed as the reaction matrix. The resulting composites exhibited a greater metal oxide concentration at the air interface with polyamide acid as the reaction matrix. The water of imidization that is released during the concurrent polyamide acid cure and additive decomposition is believed to promote metal migration and oxide formation. In contrast, XU-218 doped with either HAuCl4.3H2O or AgNO3 yields surface gold or silver when thermolyzed (300 C).

Rancourt, J. D.↗
NASA NTRS2003

Porous cobalt spheres for high temperature gradient magnetically assisted fluidized beds

Porous metallic cobalt spheres have been prepared as high temperature capable media for employment in gradient magnetically assisted fluidization and filtration technologies. Cobalt impregnated alginate beads are first formed by extrusion of an aqueous suspension of Co3O4 into a Co(II) chloride solution. The organic polymer is thermally decomposed yielding cobalt oxide spheres, followed by reduction to the metallic state, and densification. Cobalt beads have been produced with porosities ranging between 10 and 50%, depending upon sintering conditions. The product media have been characterized by scanning electron microscopy (SEM), nitrogen adsorption porosimetry, and vibrating sample magnetometry. c2003 Elsevier Science Ltd. All rights reserved.

NASA Discipline Life Support Systems↗
DOE OSTI2024

Measuring 3D Chemistry at 1 nm Resolution with Fused Multi-Modal Electron Tomography

Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment is completed. Even larger doses are required to achieve high resolution. Thus, chemical mapping in 3D has been unachievable except at lower resolution with the most radiation-hard materials. Here, high-resolution 3D chemical imaging is achieved near or below one-nanometer resolution in an Au-Fe3O4 metamaterial within an organic ligand matrix, Co3O4-Mn3O4 core-shell nanocrystals, and ZnS-Cu0.64S0.36 nanomaterial using fused multi-modal electron tomography. Multi-modal data fusion enables high-resolution chemical tomography often with 99% less dose by linking information encoded within both elastic (HAADF) and inelastic (EDX/EELS) signals. We thus demonstrate that sub-nanometer 3D resolution of chemistry is measurable for a broad class of geometrically and compositionally complex materials.

Schwartz, Jonathan↗
DOE OSTI2021

Novel vertically aligned nanocomposite of Bi 2 WO 6 -Co 3 O 4 with room-temperature multiferroic and anisotropic optical response

A review of a new vertically aligned nanocomposite (VAN) structure based on two-dimensional (2D) layered oxides has been designed and self-assembled on both LaAlO 3 (001) and SrTiO 3 (001) substrates. The new VAN structure consists of epitaxially grown Co 3 O 4 nanopillars embedded in the Bi 2 WO 6 matrix with a unique 2D layered structure, as evidenced by the microstructural analysis. Physical property measurements show that the new Bi 2 WO 6 -Co 3 O 4 VAN structure exhibits strong ferromagnetic and piezoelectric response at room temperature as well as anisotropic permittivity response. This work demonstrates a new approach in processing multifunctional VANs structure based on the layered oxide systems towards future nonlinear optics, ferromagnets, and multiferroics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Wastepaper-derived porous carbon supported cobalt nanocomposites for all solid-state flexible supercapacitor

The conversion of wastepaper into high-value carbon materials has gained significant attention as a sustainable strategy for energy storage applications. Owing to its low cost, abundance, and intrinsic fibrous structure, wastepaper serves as an attractive precursor for carbon-based electrode materials. In this work, a novel electrode comprising cobalt nanoparticles and Co 3 O 4 embedded in wastepaper-derived porous carbon has been developed for use in a flexible all-solid-state asymmetric supercapacitor. The integration of cobalt nanoparticles and Co 3 O 4 introduces redox-active centres, which enhance the electrochemical activity of the carbon framework. Mean while, the interconnected porous and conductive carbon network enables rapid ion diffusion and efficient electron transport, synergistically improving the overall electrochemical performance. It delivers a high specific capacitance of 61.5 Fg -1 , a power density of 5143 W kg -1 , and an energy density of 9 Wh kg -1 at a current density of 2.5 A/ g. Furthermore, the device maintains outstanding cycling stability, retaining 82.86 % of its capacitance after 10,000 charge-discharge cycles. Practical applicability is confirmed through its ability to power

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Insights into the electronic origin of enhancing the catalytic activity of Co 3 O 4 for oxygen evolution by single atom ruthenium

The surface electronic structure of transition-metal oxide catalysts plays a decisive role in binding the intermediates of the oxygen evolution reaction (OER) to the oxide surface, in turn influencing the catalytic activity of these materials. However, the approaches to modulating the electronic structure of surface metal ions are rare and far behind the demands. Here, we report a surface single atom decoration for adjusting the surface electronic structure of Co 3 O 4 , leading to enhanced electrocatalytic activity for OER, in which the isolated Ru single atoms were uniformly deposited on the surface of Co 3 O 4 by an atomic layer deposition technology. As the OER catalyst, the as-made catalysts have exhibited a significantly enhanced catalytic activity (with increasing to 95.5 times) and a dramatically decreased overpotential. The density functional theory calculations reveal that the single-atom Ru acts as a promotor to adjust the 3d electronic structure of adjacent Co atoms and to tune the binding energy between intermediates and activity sites, finally leading to enhanced catalytic activity.

36 MATERIALS SCIENCE↗