Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cobalt Co2+”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cobalt-Group 13 Complexes Catalyze CO 2 Hydrogenation via a Co(-I)/Co(I) Redox Cycle

The Co(-I) dihydrogen complexes, [(η 2 -H 2 )CoML]-, where ML is the group 13 metalloligand, N(o-(NCH 2 PiPr 2 )C 6 H 4 ) 3 M, and M is Al, Ga, or In, were previously reported ( J. Am. Chem. Soc. 2017, 139, 6570-6573). In this work, the related Co(-I) end-on dinitrogen adducts, [(N 2 )CoML]-, were isolated and investigated as precatalysts for CO 2 hydrogenation. The Co–Ga catalyst was highly active, achieving 19,200 formate turnovers with an initial turnover frequency of 27,000 h –1 under 34 atm of 1:1 CO 2 /H 2 and using Verkade’s proazaphosphatrane as a base at ambient temperature. The Co–Al catalyst was moderately active, while the Co–In complex was inactive. Hence, tuning the group 13 ion greatly influences the catalytic activity at the Co site. To elucidate the role of the group 13 support, experimental and theoretical mechanistic studies of the Co–Ga and Co–Al catalysts were conducted. The Co(-I) H 2 species are potent hydride donors with estimated thermodynamic hydricities (ΔG° H– ) of 32.0(1) and 37.4(1) kcal/mol in CH 3 CN for M = Al and Ga, respectively. By acting as masked Co(I) dihydrides, the Co(-I) H 2 species operate via an unusual Co(-I)/Co(I) redox cycle. After hydride transfer to CO 2 , the resulting intermediate is the Co(I) hydride complex, HCoML, which was independently synthesized and structurally characterized for M = Al and Ga. The Gibbs free energy for H 2 binding, ΔG° bind (1 atm), to generate (η 2 -H 2 )HCoML was slightly more favorable for HCoGaL (-4.2(1) kcal/mol) than for HCoAlL (-2.7(1) kcal/mol). In the subsequent step, the deprotonation reaction to regenerate the initial catalyst was much more favorable for (η 2 -H 2 )HCoGaL (pK a of 31.4, CH 3 CN) than for (η 2 -H 2 )HCoAlL (pK a of 34.3). Finally, the straightforward substitution of Al with Ga perturbs the energy profile of the catalytic reaction (|ΔΔG° H– | = 5.4 kcal/mol, |ΔΔG° bind | = 1.5 kcal/mol, and |ΔΔG° K a | = 4.0 kcal/mol) and thus provides a thermodynamic rationale for the higher catalytic efficiency of Co–Ga over Co–Al.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Heterogenized Pyridine-Substituted Cobalt(II) Phthalocyanine Yields Reduction of CO2 by Tuning the Electron Affinity of the Co Center

Conversion of CO 2 to reduced products is a promising route to alleviate irreversible climate change. In this paper we report the synthesis of a Co-based phthalocyanine with pyridine moieties (CoPc-Pyr), which is supported on a carbon electrode and shows Faradaic efficiency ~90% for CO at 490 mV of overpotential (-0.6 V vs reversible hydrogen electrode (RHE)). In addition, its catalytic activity at -0.7 V versus RHE surpasses other Co-based molecular and metal-organic framework catalysts for CO 2 reduction at this bias. Density functional theory calculations show that pyridine moieties enhance CO 2 adsorption and electron affinity of the Co center by an inductive effect, thus lowering the overpotential necessary for CO 2 conversion. Our study shows that CoPc-Pyr reduces CO 2 at lower overpotential and with higher activity than noble metal electrodes, such as silver.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surface Molecular Chemistry in Solar Fuel Research

Through this research, we aim to combine transition metal catalysts with light-absorbing semiconductors for use in efficient solar energy conversion. Upon receiving photogenerated electrons from the semiconductors, the transition metal catalysts could accelerate the reduction of carbon dioxide into energy-rich fuels. We have deposited cobalt complexes, including cobalt macrocycles and single cobalt catalysts, onto different semiconductors that demonstrated targeted activities in photochemical carbon dioxide reduction. The structures and catalytic mechanisms of the surface cobalt catalysts were investigated using advanced techniques, including X-ray absorption spectroscopy at DOE user facilities. Our research provides new strategies to enable effective coupling between molecularly defined catalytic sites with heterogeneous surfaces for converting solar energy into chemicals and fuels. Research results obtained through this project have been disseminated through journal publications and conference presentation. In addition, this project provided important interdisciplinary training opportunities for two postdoctoral scholars, four graduate researchers, and one high school student. It also allowed us to establish successful State-National Laboratory partnerships with Brookhaven National Lab and Argonne National Lab.

14 SOLAR ENERGY↗
DOE OSTI2024

Covalent Functionalization of Silicon with Plasma-Grown “Fuzzy” Graphene: Robust Aqueous Photoelectrodes for CO 2 Reduction by Molecular Catalysts

Carbon electrodes are ideal for electrochemistry with molecular catalysts, exhibiting facile charge transfer and good stability. Yet for solar-driven catalysis with semiconductor light absorbers, stable semiconductor/carbon interfaces can be difficult to achieve, and carbon’s high optical extinction means it can only be used in ultrathin layers. Here, we demonstrate a plasma-enhanced chemical vapor deposition process that achieves well-controlled deposition of out-of-plane “fuzzy” graphene (FG) on thermally oxidized Si substrates. The resulting Si|FG interfaces possess a silicon oxycarbide (SiOC) interfacial layer, implying covalent bonding between Si and the FG film that is consistent with the mechanical robustness observed from the films. The FG layer is uniform and tunable in thickness and optical transparency by deposition time. Using p-type Si|FG substrates, noncovalent immobilization of cobalt phthalocyanine (CoPc) molecular catalysts was employed for the photoelectrochemical reduction of CO 2 in aqueous solution. The Si|FG|CoPc photocathodes exhibited good catalytic activity, yielding a current density of ∼1 mA/cm 2 , Faradaic efficiency for CO of ∼70% (balance H 2 ), and stable photocurrent for at least 30 h at −1.5 V vs Ag/AgCl under 1-sun illumination. Furthermore, the results suggest that plasma-deposited FG is a robust carbon electrode for molecular catalysts and suitable for further development of aqueous-stable Si photocathodes for CO 2 reduction.

CO2 reduction↗
DOE OSTI2023

Precisely modulate interfacial Bi-O bridge bond in Co-TCPP/Bi 3 O 4 Br to trigger long-lasting charge separation for boosting CO 2 photoreduction

Insufficient charge separation and feeble CO 2 activation limit the CO 2 photoreduction efficiency. It is highly desirable to consciously construct organic–inorganic hybrid composites to simultaneously accelerate charge separation and provide favorable active sites. Herein, a defect-induced interfacial Bi-O bridge bond is constructed by grafting terminal O of cobalt porphyrin (Co-TCPP) with Bi 3 O4Br. Systematic investigations reveal that the Bi-O bridge bond as the charge migration bridge accelerates the extraction and transfer of electron from the external [Bi 3 O 4 ] layers to Co-TCPP, and the millisecond separation lifetime of electrons on Co-TCPP can be achieved. Co atoms as the active sites optimized the CO 2 adsorption and activation, thus promoting the formation of COOH*. As a result, the CO 2 photoreduction rate of 0.5% Co-TCPP/Bi 3 O4Br reaches 71.3 μmol g -1 h -1 in pure water, 2.53-fold of that on the pristine Bi 3 O4Br. This work provides atomistic insights and strategies for the construction of new organic–inorganic hybrid materials for artificial photosynthesis and CO 2 photoreduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective CO 2 Reduction by Bis(bipyridine)cobalt(II) Catalysts: The Role of Pendant Pyridine as a Proton Acceptor

Electrochemical CO 2 reduction reaction (CO 2 RR) catalyzed by molecular earth-abundant metal catalysts is a promising strategy to convert CO 2 into value-added products. One recent trend in this field has been focusing on the rational design of catalysts by incorporating redox-active ligands and modifying the secondary coordination sphere (SCS) to achieve efficient and selective CO 2 RR. Herein, we report a series of Co bis­(bipyridine) catalysts featuring various dangling groups, such as pyridine, tertiary amine, or butyl, in the secondary coordination sphere (Co-PyMe, Co-Py, Co-PrN, and Co-Bu). Efficient, selective electrocatalytic CO 2 RR was achieved by the complexes after the generation of triply reduced intermediate consisting of a Co I center and a dianionic ligand, producing CO as the major product and trace amount of H 2 . Strong correlations with the identity of dangling groups and turnover frequency (TOF) have been observed, in which Co-PyMe displayed the highest TOF (1086 s –1 in MeCN/H 2 O). Mechanistic studies indicated that the acceleration of CO 2 RR with pyridine-functionalized catalysts were derived from the protonation of pyridine dangling groups which participated as weak acids in the H-bonding network with exogenous proton sources, stabilizing CO 2 -bound intermediates and facilitating proton transfer. In addition, precatalytic CO 2 binding and activation at the third reduction (−2.1 V) was revealed by CV and SEC-IR studies. The resultant doubly reduced CO-bound species acted as a trapping state which inhibited CO 2 RR electrocatalysis. Regeneration of active species was accessed via reductive dissociation of CO at a more negative potential. In conclusion, this study highlights the combined effects of redox-active ligands and pyridine/pyridinium as SCS groups on CO 2 RR catalysis and provides design principles for future development of CO 2 RR catalysts utilizing pyridine/pyridiniums as SCS functional groups to fine-tune the catalytic activity.

CO2 reduction↗
NASA NTRS1986

Investigation of the effects of cobalt ions on epoxy properties

The effects of Co(acac)sub x complexes on MY-720 epoxy properties have been investigated. It appears that Co2(+) ions form antibonding or nonbonding orbitals which increase the free volume and also reduce the cohesiveness of the host epoxy. The effects of Co2(+) ions, on the other hand, seem to result in increased Cohesiveness of the epoxy. The experimental values of magnetic moments of both types of ions in MY-720 suggest that the orbital momentum contributions of the (3d) electrons are partially conserved, though the effect is more pronounced for Co2(+) ions. The coordination environment of the cobalt ions in the host epoxy does not appear to be uniquely defined. These results indicate that the effects of metal ions on resin properties cannot be easily predicted on the basis of ligand field theory argument alone. Complex interactions between metal ions and host epoxy molecular structure suggest the desirability of parallel experimental investigations of electronic, magnetic, and mechanical properties of metal ion-containing epoxy samples for comparison with theory.

Singh, J. J.↗
DOE OSTI2023

Sterically attenuated electronic communication in cobalt complexes of meridional isoquinoline-derived ligands for applications in electrocatalysis

The ability to synthetically tune the ligand frameworks of redox-active molecules is of critical importance to the economy of solar fuels because manipulating their redox properties can afford control over the operating potentials of sustained electrocatalytic or photoelectrocatalytic processes. The electronic and steric properties of 2,2′:6′,2″-terpyridine (Terpy) ligand frameworks can be tuned by functional group substitution on ligand backbones, and these correlate strongly to their Hammett parameters. The synthesis of a new series of tridentate meridional ligands of 2,4,6-trisubstituted pyridines that engineers the ability to finely tune the redox potentials of cobalt complexes to more positive potentials than that of their Terpy analogs is achieved by aryl-functionalizing at the four-position and by including isoquinoline at the two- and six-positions of pyridine (Aryl-DiQ). Their cobalt complex syntheses, their electronic properties, and their catalytic activity for carbon dioxide (CO2) reduction are reported and compared to their Terpy analogs. The cobalt derivatives generally experience a positive shift in their redox features relative to the Terpy-based analogs, covering a complementary potential range. Although those evaluated fail to produce any quantifiable products for the reduction of CO2 and suffer from long-term instability, these results suggest possible alternate strategies for stabilizing these compounds during catalysis. We speculate that lower equilibrium association constants to the cobalt center are intrinsic to these ligands, which originate from a steric interaction between protons on the pyridine and isoquinoline moieties. Nevertheless, the new Aryl-DiQ ligand framework has been engineered to selectively tune homoleptic cobalt complexes’ redox potentials.

Chemistry↗
NASA NTRS1981

Reduced hydrogen permeability at high temperatures

CO and CO2 reduce hydrogen loss through iron, nickel, and cobalt based alloy tubes. Method is based on concept that oxide film on metal surface reduces hydrogen permeability through metal; adding CO or CO2 forms oxide films continuously during operation, and hydrogen containment is improved. Innovation enhances prospects for Stirling engine system utilization.

Stephens, J. R.↗
DOE OSTI2024

Understanding the Origin of Negative Temperature Dependence and Activity of N-Coordinated Cobalt Sites During Ethylene Dimerization

The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dianhydride-Modified Graphitic Carbon Nitride as a Support for Cobalt Single-Atom Photocatalysts

Graphitic carbon nitride (C 3 N 4 ) has been widely explored as a photoactive support for single-atom catalysts (SACs). In this paper, three different π-rich aromatic dianhydrides are employed to introduce molecular quantized trap states into the conduction band of C 3 N 4 to facilitate efficient charge-separation and to promote an enhanced photocatalytic CO 2 reduction response. These modified C 3 N 4 materials have been characterized structurally and spectroscopically for use as the support for Co-based SACs. In photocatalytic CO 2 reduction studies, the Co SAC on naphthalene dianhydride doped C 3 N 4 exhibited the highest activity and selectivity towards CO production among the Co SACs tested in this work. The observed improvement in photocatalytic CO 2 -to-CO conversion activity correlates with trends in photoinduced charge separation, as revealed by photoluminescence spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2022

Crystallographic dependence of CO 2 hydrogenation pathways over HCP-Co and FCC-Co catalysts

We report efficient conversion of CO 2 is of great significance for sustainable supply of chemicals and fuels. While Co-based catalysts are known to be effective for CO hydrogenation in Fischer-Tropsch synthesis, they work very differently in CO 2 hydrogenation. This study reveals a crystallographic dependence of reaction pathways for CO 2 hydrogenation on Co catalyst showing a new type of structure sensitivity and structure-activity-selectivity relationship for CO 2 conversion to chemicals and fuels. The experimental work on CO 2 conversion including steady-state isotopic transient kinetic analysis (SSITKA) using 13 C-labeled CO 2 shows a preferential CH 4 formation over HCP-Co but dominant CO formation over FCC-Co. The density functional theory calculations indicate that CO 2 does dissociate directly into chemisorbed CO * and O * on both HCP-Co and FCC-Co, but the CO * intermediates on HCP-Co prefer to be hydrogenated to form CH 4 whereas the CO* on FCC-Co preferentially desorb to form CO. The significantly altered adsorption strength of CO * due to the presence of chemisorbed O * and CO 2 * species on the catalyst surface is responsible for the mechanistic disconnection in product selectivity between the CO 2 and CO hydrogenation over Co catalysts. This study also shows that the addition of K to Co diminishes the direct impact of Co crystal structure, but improves the selectivity to C 2 + hydrocarbons along with higher CO 2 conversion. This seems to result from another pathway originating from HCOO* intermediate from bonding interaction of surface Co atoms with carbon in CO 2 , leading to the formation of CH x * whose coupling subsequently give rises to C 2 + products. The present study sheds new light into the crystallographic structural sensitivity of CO 2 hydrogenation towards the rational design of more selective catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗