Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collision frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A Consistent BGK Model with Velocity-Dependent Collision Frequency for Gas Mixtures

Abstract We derive a multi-species BGK model with velocity-dependent collision frequency for a non-reactive, multi-component gas mixture. The model is derived by minimizing a weighted entropy under the constraint that the number of particles of each species, total momentum, and total energy are conserved. We prove that this minimization problem admits a unique solution for very general collision frequencies. Moreover, we prove that the model satisfies an H-Theorem and characterize the form of equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The Effect of Spatially Varying Collision Frequency on the Development of the Rayleigh–Taylor Instability

Abstract The Rayleigh–Taylor (RT) instability is ubiquitously observed, yet has traditionally been studied using ideal fluid models. Collisionality can vary strongly across the fluid interface, and previous work demonstrates the necessity of kinetic models to completely capture dynamics in certain collisional regimes. Where previous kinetic simulations used spatially and temporally constant collision frequency, this work presents five-dimensional (two spatial, three velocity dimensions) continuum-kinetic simulations of the RT instability using a more realistic spatially varying collision frequency. Three cases of collisional variation are explored for two Atwood numbers: low to intermediate, intermediate to high, and low to high. The low-to-intermediate case exhibits no RT instability growth, while the intermediate-to-high case is similar to a fluid-limit kinetic case with interface widening biased toward the lower-collisionality region. A novel contribution of this work is the low-to-high collisionality case that shows significantly altered instability growth through an upward movement of the interface and damped spike growth due to increased free-streaming particle diffusion in the lower region. Contributions to the energy flux from the non-Maxwellian portions of the distribution function are not accessible to fluid models and are greatest in magnitude in the spike and regions of low collisionality. Increasing the Atwood number results in greater RT instability growth and reduced upward interface movement. Deviation of the distribution function from Maxwellian is inversely proportional to collision frequency and concentrated around the fluid interface. The linear phase of RT instability growth is well described by theoretical linear growth rates accounting for viscosity and diffusion.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Statistical inference of collision frequencies from x-ray Thomson scattering spectra

Thomson scattering spectra measure the response of plasma particles to incident radiation. In warm dense matter, which is opaque to visible light, x-ray Thomson scattering (XRTS) enables a detailed probe of the electron distribution and has been used as a diagnostic for electron temperature, density, and plasma ionization. In this work, we examine the sensitivities of inelastic XRTS signatures to modeling details, including the dynamic collision frequency and the electronic density of states. Applying verified Monte Carlo inversion methods to dynamic structure factors obtained from time-dependent density functional theory, we assess the utility of XRTS signals as a way to inform the dynamic collision frequency, especially its direct-current limit, which is directly related to the electrical conductivity.

Collision frequency↗
DOE OSTI2023

Improving dynamic collision frequencies: Impacts on dynamic structure factors and stopping powers in warm dense matter

Simulations and diagnostics of high-energy-density plasmas and warm dense matter rely on models of material response properties, both static and dynamic (frequency-dependent). Here, in this work, we systematically investigate variations in dynamic electron–ion collision frequencies ν(ω) in warm dense matter using data from a self-consistent-field average-atom model. We show that including the full quantum density of states, strong collisions, and inelastic collisions lead to significant changes in ν(ω). These changes result in red shifts and broadening of the plasmon peak in the dynamic structure factor, an effect observable in x-ray Thomson scattering spectra, and modify stopping powers around the Bragg peak. These changes improve the agreement of computationally efficient average-atom models with first-principles time-dependent density functional theory in warm dense aluminum, carbon, and deuterium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Numerical schemes for a multi-species BGK model with velocity-dependent collision frequency

Here, we consider a kinetic description of multi-species gas mixture modeled with Bhatnagar-Gross-Krook (BGK) collision operators, in which the collision frequency varies not only in time and space but also with the microscopic velocity. In this model, the Maxwellians typically used in standard BGK operators are replaced by a generalization of such target functions, which are defined by a variational procedure. In this paper we present a numerical method for simulating this model, which uses an Implicit-Explicit (IMEX) scheme to minimize a certain potential function, mimicking the Lagrange functional that appears in the theoretical derivation. We show that theoretical properties such as conservation of mass, total momentum and total energy as well as positivity of the distribution functions are preserved by the numerical method, and illustrate its usefulness and effectiveness with numerical examples.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Nonmagnetized Collisional Plasma Parameter Estimation From Two Frequency Signal Interrogation Attenuation

A nonmagnetized collisional plasma parameter estimator from two frequency signal interrogation attenuation is developed. The plasma parameters that are estimated are the plasma frequency, electron neutral momentum collision frequency, and the plasma thickness. The plasma frequency and electron neutral momentum collision frequency are considered uniform across the plasma thickness. The relative permittivity is defined, and the complex index of refraction is developed. Using this definition and applying the plasma frequency, electron neutral momentum collision frequency, the radial propagation frequency, and plasma thickness, an attenuation is determined for known cases. The development of the estimator is discussed. The estimator uses a performance index where the minimum difference between the plasma frequencies and electron neutral momentum collision frequencies is determined for the two signal interrogation frequencies under the constraint of the same plasma thickness. The estimator was developed in three stages which include iterative, sequential, and adaptive. The setups of the iterative, sequential, and adaptive approaches are discussed. The impact of the interrogation frequency and the estimator setup is investigated. The estimator in the three development stages is compared with known cases and the plasma parameter estimator performance is quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Scaling Superconducting Quantum Computers with Chiplet Architectures

Fixed-frequency transmon quantum computers (QCs) have advanced in coherence times, addressability, and gate fidelities. Unfortunately, these devices are restricted by the number of on-chip qubits, capping processing power and slowing progress toward fault-tolerance. Although emerging transmon devices feature over 100 qubits, building QCs large enough for meaningful demonstrations of quantum advantage requires overcoming many design challenges. For example, today’s transmon qubits suffer from significant variation due to limited precision in fabrication. As a result, barring significant improvements in current fabrication techniques, scaling QCs by building ever larger individual chips with more qubits is hampered by device variation. Severe device variation that degrades QC performance is referred to as a defect. Here, we focus on a specific defect known as a frequency collision. When transmon frequencies collide, their difference falls within a range that limits two-qubit gate fidelity. Frequency collisions occur with greater probability on larger QCs, causing collision-free yields to decline as the number of on-chip qubits increases. As a solution, we propose exploiting the higher yields associated with smaller QCs by integrating quantum chiplets within quantum multi-chip modules (MCMs). Yield, gate performance, and application-based analysis show the feasibility of QC scaling through modularity. Our results demonstrate that chiplet architectures, relative to monolithic designs, benefit from average yield improvements ranging from 9.6 – 92.6 × for ≲5 qubit machines. In addition, our simulations explore the design space of chiplet systems and discover configurations that demonstrate average two-qubit gate infidelity reductions that are at best 0.815 × their monolithic counterpart. Lastly, we observe that carefully-selected modular systems achieve fidelity improvements on a range of benchmark circuits.

quantum architecture↗
DOE OSTI2023

Anomalous cross-field transport in a Hall thruster inferred from direct measurement of instability growth rates

The contribution of the electron drift instability to anomalous electron transport is experimentally assessed in a Hall effect discharge. The transport is represented by an anomalous collision frequency, which is related through quasilinear theory to the energy and growth rate of the instability. The wave energy is measured directly with ion saturation probes, while estimates of the growth rate are employed based on both linearized theory and direct measurement. The latter measurement is performed with a bispectral analysis method. The wave-driven collision frequency is compared to measurements of the actual collision frequency inferred from a method based on laser- induced fluorescence. It is found that estimates for transport using linearized theory for the growth differ by over an order of magnitude from the actual anomalous collision frequency in the plasma. The wave-driven anomalous collision frequency with measured growth, however, is shown to agree with the electron collision frequency in magnitude and capture aspects of the trends in spatial variation. This result demonstrates experimentally that wave-driven effects ultimately can explain the observed cross-field transport in these devices. As a result, the implications of this finding are discussed in the context of the key lengthscales that drive the transport as well as the implications identifying reduced fidelity models that could be used to predict anomalous collision frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Collisional space-charge-limited current with monoenergetic velocity: From Child–Langmuir to Mott–Gurney

All theories coupling electron emission theories ultimately approach the space-charge-limited current (SCLC) in vacuum, given by the Child–Langmuir (CL) law, for sufficiently high voltage, or the Mott–Gurney (MG) law for finite electron mobility and high (but not infinite) voltage. These analyses demonstrate the presence of an SCLC regime that cannot be described by either CL or MG. Here, we derive an exact solution for SCLC for general electron mobility and nonzero velocity. We recover the traditional CL with nonzero initial velocity at high voltage. For low mobility (or infinite collision frequency), we derive corrections to the MG law that depend on the ratio of initial velocity to the product of collision frequency and gap distance or initial velocity to drift velocity for low and high voltage, respectively. Increasing collisionality decreases the correction to SCLC for nonzero velocity, indicating that these corrections are less important for low-mobility materials (e.g., solids) than high-mobility materials (e.g., air or vacuum). For a given gap distance (collision frequency), increasing the collision frequency (gap distance) increases the voltage necessary to make the gap appear more like vacuum. These results provide a generalized SCLC for both collisionality and initial velocity when assessing the transitions between electron emission mechanisms.

Physics↗
DOE OSTI2021

Reimagining full wave rf quasilinear theory in a tokamak

The velocity dependent resonant interaction of particles with applied radiofrequency (rf) waves during heating and current drive in the presence of pitch angle scattering collisions gives rise to narrow collisional velocity space boundary layers that dramatically enhance the role of collisions as recently shown by Catto ( J. Plasma Phys. , vol. 86, 2020, 815860302). The behaviour is a generalization of the narrow collisional boundary layer that forms during Landau damping as found by Johnston ( Phys. Fluids , vol. 14, 1971, pp. 2719–2726) and Auerbach ( Phys. Fluids , vol. 20, 1977, pp. 1836–1844). For a wave of parallel wave number ${k_{||}}$ interacting with weakly collisional plasma species of collision frequency $\nu$ and thermal speed ${v_{\textrm{th}}}$ , the effective collision frequency becomes of order $\nu {({k_{||}}{v_{th}}/\nu )^{2/3}} \gg \nu $ . The narrow boundary layers that arise because of the diffusive nature of the collisions allow a physically meaningful wave–particle interaction time to be defined that is the inverse of this effective collision frequency. The collisionality implied by the narrow boundary layer results in changes in the standard quasilinear treatment of applied rf fields in tokamaks while remaining consistent with causality. These changes occur because successive poloidal interactions with the rf are correlated in tokamak geometry and because the resonant velocity space dependent interactions are controlled by the spatial and temporal behaviour of the perturbed full wave fields rather than just the spatially local Landau and Doppler shifted cyclotron wave–particle resonance condition associated with unperturbed motion of the particles. The correlation of successive poloidal circuits of the tokamak leads to the appearance in the quasilinear operator of transit averaged resonance conditions localized in velocity space boundary layers that maintain negative definite entropy production.

Physics↗
DOE OSTI2021

Reimagining full wave rf quasilinear theory in a tokamak

The velocity dependent resonant interaction of particles with applied radio frequency (rf) waves during heating and current drive in the presence of pitch angle scattering collisions gives rise to narrow collisional velocity space boundary layers that dramatically enhance the role of collisions as recently shown by Catto (J. Plasma Phys., vol. 86, 815860302, 2020). The behavior is a generalization of the narrow collisional boundary layer that forms during Landau damping as found by Johnston (Phys. Fluids, vol. 14, 1971, pp. 2719-2726) and Auerbach (Phys. Fluids, vol. 20, 1977, pp. 1836-1844). For a wave of parallel wave number k|| interacting with weakly collisional plasma species of collision frequency ν and thermal speed vth , the effective collision frequency becomes of order ν(k_||v_th /ν)^2/3>> ν . The narrow boundary layers that arise because of the diffusive nature of the collisions allows a physically meaningful wave-particle interaction time to be defined that is the inverse of this effective collision frequency. The collisionality implied by the narrow boundary layer results in changes in the standard quasilinear treatment of applied rf fields in tokamaks while remaining consistent with causality. These changes occur because successive poloidal interactions with the rf are correlated in tokamak geometry and because the resonant velocity space dependent interactions are controlled by the spatial and temporal behavior of the perturbed full wave fields rather than just the spatially local Landau and Doppler shifted cyclotron wave-particle resonance condition associated with unperturbed motion of the particles. The correlation of successive poloidal circuits of the tokamak leads to the appearance in the quasilinear operator of transit averaged resonance conditions localized in velocity space boundary layers that maintain negative definite entropy production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Finite orbit width effects in large aspect ratio stellarators

New orbit-averaged equations for low collisionality neoclassical fluxes in large aspect ratio stellarators with mirror ratios close to unity are derived. The equations retain finite orbit width effects by employing the second adiabatic invariant $J$ as a velocity-space coordinate and they have been implemented in the orbit-averaged neoclassical code KNOSOS (Velasco et al. , J. Comput. Phys. , vol. 418, 2020, 109512; Velasco et al. , Nucl. Fusion , vol. 61, 2021, 116013). The equations are used to study the $1/\nu$ regime and the lower collisionality regimes. For generic large aspect ratio stellarators with mirror ratios close to unity, as the collision frequency decreases, the $1/\nu$ regime transitions directly into the $\nu$ regime, without passing through a $\sqrt {\nu }$ regime. An explicit formula for the neoclassical fluxes in the $\nu$ regime is obtained. The formula includes the effect of particles that transition between different types of wells. While these transitions produce stochastic scattering independent of the value of the collision frequency in velocity space, the diffusion in real space remains proportional to the collision frequency. The $\sqrt {\nu }$ regime is only recovered in large aspect ratio stellarators close to omnigeneity: large aspect ratio stellarators with large mirror ratios and optimized large aspect ratio stellarators with mirror ratios close to unity. Neoclassical transport in large aspect ratio stellarators with large mirror ratios can be calculated with the orbit-averaged equations derived by Calvo et al. ( Plasma Phys. Control. Fusion , vol. 59, 2017, 055014). In these stellarators, the $\sqrt {\nu }$ regime exists in the collisionality interval $(a/R) \ln (R/a) \ll \nu _{ii} R a/\rho _i v_{ti} \ll R/a$ . In optimized large aspect ratio stellarators with mirror ratios close to unity, the $\sqrt {\nu }$ regime occurs in an interval of collisionality that depends on the deviation from omnigeneity $\delta$ : $\delta ^{2} |\ln \delta | \ll \nu _{ii} R a/\rho _i v_{ti} \ll 1$ . Here, $\nu _{ii}$ is the ion–ion collision frequency, $\rho _i$ and $v_{ti}$ are the ion gyroradius and thermal speed, and $a$ and $R$ are the minor and major radii.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Integrated modeling methodology for ash agglomeration in poly-disperse fluidized beds using particle population framework

This article discusses a unique agglomeration modeling methodology developed based on binary collisions to combine the effects of heterogeneity in ash chemistry and granular physics. A simple population balance is defined to find changes in the particle size distribution (PSD) of a fluidized bed. Thermodynamic equilibrium calculations and a computational fluid dynamics (CFD) code, are used to obtain hydrodynamic parameters. A method to calculate and use a distribution of collision frequencies in fluidized beds, corresponding to a poly-disperse particle size distribution, was developed in order to incorporate the particle level heterogeneities. A distribution of collision frequencies obtained for poly-dispersed particles showed a three orders of magnitude higher collision frequency amongst the smaller particles than the coarser ones, at the initiation of agglomeration. Ash agglomeration occurred when the slag amount (binder) was less than 10 wt% at temperatures <850 °C for Pittsburgh No. 8 coal.

42 ENGINEERING↗
DOE OSTI2024

Limiting current in a collisional crossed-field gap

Crossed-field devices are often used in pulsed power and high-power microwave applications. Previous studies derived closed-form solutions for the limiting current of a vacuum crossed-field system, corresponding to the maximum permissible current for laminar flow, below and above the Hull cutoff B H for magnetic insulation. We extend these studies by introducing collision frequency into the electron force law as a friction term to derive the limiting current in a collisional crossed-field gap. The resulting solution recovers the vacuum crossed-field case in the limit of no collisions and the collisional space-charge limited current with general initial velocity for magnetic field B → 0. In the limit of infinite collisions, we obtain a crossed-field equivalent to the Mott–Gurney law for the maximum current permissible in a collisional, nonmagnetic diode. When the collision frequency ν is less than the electron cyclotron frequency Ω, increasing initial velocity makes the critical current nonmonotonic with increasing ν with the critical current higher at B = B H for ν = Ω. As for a misaligned crossed-field gap where a component of the magnetic field was introduced parallel to the electric field across the gap, magnetic insulation is eliminated and the discontinuity at B = B H for limiting current observed in a vacuum crossed-field gap vanishes. As B → ∞, the limiting current approaches a constant that depends on the initial velocity and the collision frequency.

Breen, Lorin I.↗
DOE OSTI2021

Noninvasive THz-TDS measurements of plasma bounded and optically shielded by Hall thruster wall material

We experimentally demonstrate the capability of terahertz time-domain spectroscopy (THz-TDS) to noninvasively measure the electron density and collision frequency of plasma bounded and optically shielded by Hall thruster wall material. This paper augments the standard THz-TDS plasma diagnostic theory to account for plasma boundaries, presents THz optical property measurements of three different wall materials (grades M, M26, and HP boron nitride composite), and provides electron density and collision frequency measurements of an inductively coupled plasma bounded and optically shielded by each wall material. We find that the electron density measurement capability is weakly impacted by the boundaries, whereas the electron collision frequency measurement capability is strongly reduced by the boundaries. Here, the bounded plasma electron density trends deviate substantially from those of the unbounded plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗